Download kv27fs120 service manual
Transcript
HISTORY INFORMATION FOR THE FOLLOWING MANUAL: BA-6 SERVICE MANUAL MODEL NAME ☛ KV-27FA310 ☛ KV-27FA310 KV-27FS120 KV-27FS120 KV-29FA310 KV-29FA310 KV-29FS120 KV-29FS120 REMOTE COMMANDER DESTINATION CHASSIS CHASSIS NO. RM-Y180 US SCC-S61U-A RM-Y180 CANADA SCC-S59Q-A RM-Y195 US SCC-S61N-A RM-Y195 CANADA SCC-S59J-A RM-Y180 LATIN NORTH SCC-S60V-A RM-Y180 LATIN SOUTH SCC-S60W-A RM-Y195 LATIN NORTH SCC-S73D-A RM-Y195 LATIN SOUTH SCC-S73E-A ORIGINAL MANUAL ISSUE DATE: 3/2004 ☛ :UPDATED ITEM REVISION DATE SUBJECT 3/2004 8/2004 No revisions or updates are applicable at this time. Reissue entire manual Added KV-27FA310 model for US and Canada TRINITRON® COLOR TELEVISION 9-965-960-02 Self Diagnosis Supported model BA-6 SERVICE MANUAL MODEL NAME REMOTE COMMANDER ☛ KV-27FA310 ☛ KV-27FA310 KV-27FS120 KV-27FS120 KV-29FA310 KV-29FA310 KV-29FS120 KV-29FS120 KV-27FS120 DESTINATION CHASSIS CHASSIS NO. RM-Y180 US SCC-S61U-A RM-Y180 CANADA SCC-S59Q-A RM-Y195 US SCC-S61N-A RM-Y195 CANADA SCC-S59J-A RM-Y180 LATIN NORTH SCC-S60V-A RM-Y180 LATIN SOUTH SCC-S60W-A RM-Y195 LATIN NORTH SCC-S73D-A RM-Y195 LATIN SOUTH SCC-S73E-A KV-29FA310 TRINITRON® COLOR TELEVISION 9-965-960-02 KV-27FA310/27FS120/29FA310/29FS120 TABLE OF CONTENTS SECTION TITLE PAGE Specifications ............................................................................................................................................................................. 4 Warnings and Cautions .............................................................................................................................................................. 5 Safety Check-Out ....................................................................................................................................................................... 6 Self-Diagnostic Function............................................................................................................................................................. 7 SECTION 1: DISASSEMBLY............................................................................................................................................................. 9 1-1. Rear Cover Removal (All Except KV-27FA310/29FA310).................................................................................................. 9 1-2. Rear Cover Removal (KV-27FA310/29FA310 Only) .......................................................................................................... 9 1-3. Chassis Assembly Removal (All Except KV-27FA310/29FA310)..................................................................................... 10 1-4. Chassis Assembly Removal (KV-27FA310/29FA310 Only) ............................................................................................. 10 1-5. Service Position (All Except KV-27FA310/29FA310) ........................................................................................................11 1-6. Service Position (KV-27FA310/29FA310 Only) .................................................................................................................11 1-7. Picture Tube Removal...................................................................................................................................................... 12 Anode Cap Removal Procedure....................................................................................................................................... 12 SECTION 2: SET-UP ADJUSTMENTS............................................................................................................................................ 13 2-1. Beam Landing .................................................................................................................................................................. 13 2-2. Convergence.................................................................................................................................................................... 14 2-3. Focus ............................................................................................................................................................................... 15 2-4. Screen (G2)...................................................................................................................................................................... 16 2-5. Method of Setting the Service Adjustment Mode ............................................................................................................. 16 2-6. White Balance Adjustments ............................................................................................................................................. 16 SECTION 3: SAFETY RELATED ADJUSTMENTS......................................................................................................................... 17 3-1. X R564 Confirmation Method (HV Hold-Down Confirmation) and Readjustments ........................................................ 17 3-2. B+ Voltage Confirmation and Adjustment ........................................................................................................................ 17 SECTION 4: CIRCUIT ADJUSTMENTS.......................................................................................................................................... 19 4-1. Setting the Service Adjustment Mode .............................................................................................................................. 19 4-2. Memory Write Confirmation Method ................................................................................................................................ 19 4-3. Remote Adjustment Buttons and Indicators ..................................................................................................................... 19 4-4. Service Data Lists ............................................................................................................................................................ 20 4-5. ID Map Table .................................................................................................................................................................... 32 4-6. A Board Adjustments........................................................................................................................................................ 32 SECTION 5: DIAGRAMS................................................................................................................................................................. 35 5-1. Circuit Boards Location .................................................................................................................................................... 35 5-2. Printed Wiring Board and Schematic Diagram Information.............................................................................................. 35 5.3. Block Diagram and Schematics ....................................................................................................................................... 37 A Board Schematic Diagram ........................................................................................................................................... 38 CW Board Schematic Diagram ....................................................................................................................................... 40 D Board Schematic Diagram (All Except KV-27FA310/29FA310) ................................................................................... 41 HS Board Schematic Diagram(All Except KV-27FA310/29FA310) .................................................................................. 42 V Board Schematic Diagram ........................................................................................................................................... 42 GD Board Schematic Diagram (KV-27FA310/29FA310 Only) ......................................................................................... 45 HR Board Schematic Diagram (KV-27FA310/29FA310 Only).......................................................................................... 48 HU Board Schematic Diagram (KV-27FA310/29FA310 Only).......................................................................................... 50 K Board Schematic Diagram (KV-27FA310/29FA310 Only) ........................................................................................... 53 5-4. Semiconductors ............................................................................................................................................................... 54 SECTION 6: EXPLODED VIEWS.................................................................................................................................................... 55 6-1. Picture Tube (KV-27FS120/29FS120 Only) ..................................................................................................................... 55 6-2. Chassis (KV-27FS120/29FS120 Only)............................................................................................................................. 56 6-3. Picture Tube (KV-27FA310/29FA310 Only)...................................................................................................................... 57 6-4. Chassis (KV-27FA310/29FA310 Only) ............................................................................................................................. 58 SECTION 7: ELECTRICAL PARTS LIST....................................................................................................................................... 59 KV-27FA310/27FS120/29FA310/29FS120 3 KV-27FA310/27FS120/29FA310/29FS120 SPECIFICATIONS KV-27FS120 Power Requirements Number of Inputs/Outputs Video 1) S Video 2) Y,PB, PR 3) Audio 4) Speaker Output (W) Subwoofer Power Consumption (W) In Use (Max) In Standby (Max) 5) Dimensions (W x H x D) mm in Mass kg lbs KV-29FS120 (L. NORTH) 120V, 60Hz KV-29FS120 (L. SOUTH) 220V, 50/60Hz KV-27FA310 & KV-29FA320 (L. NORTH) 120V, 60Hz 3 1 1 2 10W x 2 N/A 180W 1W KV-29FA320 (L. SOUTH) 220V, 50/60Hz 3 1 1 2 7W x 3 20W 175W 1W 220W 1W 215W 1W 768 x 589 x 497 mm 30 1/4 x 23 1/4 x 19 5/8 in 784 x 678 x 520.5 mm 30 7/8 x 26 3/4 x 20 1/2 in 45.2 kg 99 lbs 10 oz 50 kg 110 lbs 4 oz 1) 1 Vp-p 75 ohms unbalanced, sync negative Television system 2) Y: 1 Vp-p 75 ohms unbalanced, sync negative C: 0.286 Vp-p (Burst signal), 75 ohms American TV standard, NTSC 3) Y: 1.0 Vp-p, 75 ohms, sync negative; PB: 0.7 Vp-p, 75 ohms; PR Vp-p, 75 ohms. Channel coverage 4) 500 mVrms (100% modulation), Impedance: 47 kilohms VHF: 2-13/ UHF: 14-69/ CATV: 1-125 5) This specification is the maximum wattage. Picture tube ® FD Trinitron tube TruSurround ™ Visible screen size 27-inch picture measured diagonally Actual screen size 29-inch measured diagonally Supplied Accessories Remote Commander RM-Y195 (All Except KV-27FA310/29FA310 Only) Remote Commander RM-Y180 (KV-27FA310/29FA310 Only) Two Size AA (R6) Batteries by SRS ® TruSurround is a trademark of SRS Labs, Inc. SRS and the SRS symbol are registered trademarks of SRS Labs, Inc. in the United States and in select foreign countries. SRS and TruSurround are incorporated under license from SRS Labs, Inc. and are protected under United States Patent Nos. 4,748,669 and 4,841,572 with numerous additional issued and pending foreign patents. Purchase of this product does not convey the right to sell recordings made with the TruSurround technology. SRS (SOUND RETRIEVAL SYSTEM) The SRS (SOUND RETRIEVAL SYSTEM) is manufactured by Sony Corporation under license from SRS Labs, Inc. It is covered by U.S. Patent No. 4,748,669. Other U.S. and foreign patents pending. © 2004 Dolby Laboratories, Inc. Dolby, Pro Logic, and the double-D symbol are registered trademarks of Dolby Laboratories. The word ‘SRS’ and the SRS symbol are registered trademarks of SRS Labs, Inc. BBE and BBE symbol are trademarks of BBE Sound, Inc. and are licensed by BBE Sound, Inc. under U.S. Patent No. 4,638,258 and 4,482,866. Design and specifications are subject to change without notice. KV-27FA310/27FS120/29FA310/29FS120 4 KV-27FA310/27FS120/29FA310/29FS120 WARNINGS AND CAUTIONS CAUTION Short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield, or carbon painted on the CRT, after removing the anode. WARNING!! An isolation transformer should be used during any service to avoid possible shock hazard, because of live chassis. The chassis of this receiver is directly connected to the AC power line. ! SAFETY-RELATED COMPONENT WARNING!! Components identified by shading and ! mark on the schematic diagrams, exploded views, and in the parts list are critical for safe operation. Replace these components with Sony parts whose part numbers appear as shown in this manual or in supplements published by Sony. Circuit adjustments that are critical for safe operation are identified in this manual. Follow these procedures whenever critical components are replaced or improper operation is suspected. ATTENTION!! Apres avoir deconnecte le cap de l’anode, court-circuiter l’anode du tube cathodique et celui de l’anode du cap au chassis metallique de l’appareil, ou la couche de carbone peinte sur le tube cathodique ou au blindage du tube cathodique. Afin d’eviter tout risque d’electrocution provenant d’un chássis sous tension, un transformateur d’isolement doit etre utilisé lors de tout dépannage. Le chássis de ce récepteur est directement raccordé à l’alimentation du secteur. ! ATTENTION AUX COMPOSANTS RELATIFS A LA SECURITE!! Les composants identifies par une trame et par une marque ! sur les schemas de principe, les vues explosees et les listes de pieces sont d’une importance critique pour la securite du fonctionnement. Ne les remplacer que par des composants Sony dont le numero de piece est indique dans le present manuel ou dans des supplements publies par Sony. Les reglages de circuit dont l’importance est critique pour la securite du fonctionnement sont identifies dans le present manuel. Suivre ces procedures lors de chaque remplacement de composants critiques, ou lorsqu’un mauvais fonctionnement suspecte. KV-27FA310/27FS120/29FA310/29FS120 5 KV-27FA310/27FS120/29FA310/29FS120 SAFETY CHECK-OUT After correcting the original service problem, perform the following safety checks before releasing the set to the customer: 1. Check the area of your repair for unsoldered or poorly soldered connections. Check the entire board surface for solder splashes and bridges. 2. Check the interboard wiring to ensure that no wires are “pinched” or touching high-wattage resistors. 3. Check that all control knobs, shields, covers, ground straps, and mounting hardware have been replaced. Be absolutely certain that you have replaced all the insulators. 4. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement. 5. Look for parts which, though functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement. 6. Check the line cords for cracks and abrasion. Recommend the replacement of any such line cord to the customer. 7. Check the B+ and HV to see if they are specified values. Make sure your instruments are accurate; be suspicious of your HV meter if sets always have low HV. 8. Check the antenna terminals, metal trim, “metallized” knobs, screws, and all other exposed metal parts for AC leakage. Check leakage as described below. Leakage Test The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microamperes). Leakage current can be measured by any one of three methods. 1. A commercial leakage tester, such as the Simpson 229 or RCA WT-540A. Follow the manufacturers’ instructions to use these instructions. 2. A battery-operated AC milliampmeter. The Data Precision 245 digital multimeter is suitable for this job. 3. Measuring the voltage drop across a resistor by means of a VOM or battery-operated AC voltmeter. The “limit” indication is 0.75 V, so analog meters must have an accurate low voltage scale. The Simpson’s 250 and Sanwa SH-63TRD are examples of passive VOMs that are suitable. Nearly all battery-operated digital multimeters that have a 2 VAC range are suitable (see Figure A). How to Find a Good Earth Ground A cold-water pipe is a guaranteed earth ground; the cover-plate retaining screw on most AC outlet boxes is also at earth ground. If the retaining screw is to be used as your earth ground, verify that it is at ground by measuring the resistance between it and a cold-water pipe with an ohmmeter. The reading should be zero ohms. If a cold-water pipe is not accessible, connect a 60- to 100-watt trouble- light (not a neon lamp) between the hot side of the receptacle and the retaining screw. Try both slots, if necessary, to locate the hot side on the line; the lamp should light at normal brilliance if the screw is at ground potential (see Figure B). To Exposed Metal Parts on Set Trouble Light AC Outlet Box 0.15 F 1.5 K Ω Ohmmeter Cold-water Pipe AC Voltmeter (0.75 V) Earth Ground Figure A. Using an AC voltmeter to check AC leakage. KV-27FA310/27FS120/29FA310/29FS120 Figure B. Checking for earth ground. 6 KV-27FA310/27FS120/29FA310/29FS120 SELF-DIAGNOSTIC FUNCTION Self Diagnosis Supported model The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY/TIMER LED will automatically begin to flash. The number of times the LED flashes translates to a probable source of the problem. A definition of the STANDBY/TIMER LED flash indicators is listed in the instruction manual for the user’s knowledge and reference. If an error symptom cannot be reproduced, the Remote Commander can be used to review the failure occurrence data stored in memory to reveal past problems and how often these problems occur. Diagnostic Test Indicators When an error occurs, the STANDBY/TIMER LED will flash a set number of times to indicate the possible cause of the problem. If there is more than one error, the LED will identify the first of the problem areas. Results for all of the following diagnostic items are displayed on screen. No error has occurred if the screen displays a “0”. Diagnostic Item Description Power does not turn on No. of times Self-Diagnositc Probable Cause Location STANDBY/ TIMER Display/ lamp flashes Diagnostic Result Does not light • Power cord is not plugged in. • Fuse is burned out (F601). (A Board) Detected Symptoms • Power does not come on. • No power is supplied to the TV. • AC Power supply is faulty. +B overcurrent (OCP)* 2 times 2:0 or 2:1 • H.OUT (Q505) is shorted. (A Board) • IC2751 is shorted. (CW Board) • Power does not come on. • Load on power line is shorted. I-Prot 4 times 4:0 or 4:1 • +13V is not supplied. (A Board) • IC545 is faulty. (A Board) • Has entered standby state after horizontal raster. • Vertical deflection pulse is stopped. • Power line is shorted or power supply is stopped. IK (AKB) 5 times 5:0 or 5:1 • IC001 is faulty. (A Board) • No raster is generated. • Screen (G2) is improperly adjusted.** • CRT Cathode current detection reference pulse output is small. *If a +B overcurrent is detected, stoppage of the vertical deflection is detected simultaneously. The symptom that is diagnosed first by the mircrocontroller is displayed on the screen. **Refer to Screen (G2) Adjustments in Section 2-4. of this manual. Display of Standby/Timer LED Flash Count 2 times 4 times 5 times LED ON 0.3 sec. LED OFF 0.3 sec. LED OFF 3 sec. Standby/Timer LED Diagnostic Item Flash Count* +B Overcurrent 2 times I-Prot 4 times IK (AKB) 5 times *One flash count is not used for self-diagnostic. Stopping the Standby/Timer LED Flash Turn off the power switch on the TV main unit or unplug the power cord from the outlet to stop the STANDBY/TIMER LAMP from flashing. KV-27FA310/27FS120/29FA310/29FS120 7 KV-27FA310/27FS120/29FA310/29FS120 Self-Diagnostic Screen Display For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confirmed, it is possible to bring up past occurrences of failure on the screen for confirmation. To Bring Up Screen Test In standby mode, press buttons on the Remote Commander sequentially, in rapid succession, as shown below: Display Sound Volume - Channel 5 Power ON Note that this differs from entering the Service Mode (Sound Volume + ). Self-Diagnostic Screen Display SELF DIAGNOSTIC 2: +B OCP 0 3: +B OVP N/A 4: VSTOP 0 5: AKB 1 101: WDT N/A Numeral “0” means that no fault was detected. Numeral “1” means a fault was detected one time only. Handling of Self-Diagnostic Screen Display Since the diagnostic results displayed on the screen are not automatically cleared, always check the self-diagnostic screen during repairs. When you have completed the repairs, clear the result display to “0”. Unless the result display is cleared to “0”, the self-diagnostic function will not be able to detect subsequent faults after completion of the repairs. Clearing the Result Display To clear the result display to “0”, press buttons on the Remote Commander sequentially when the diagnostic screen is displayed, as shown below: Channel 8 ENTER Quitting the Self-Diagnostic Screen To quit the entire self-diagnostic screen, turn off the power switch on the Remote Commander or the main unit. Self-Diagnostic Circuit A BOARD IC001 Y/CHROMA JUNGLE FROM CW BOARD IC2751 PIN 5 FROM A BOARD IC561 PIN 7 51 IK-AKBIN A BOARD IC545 V. OUT A BOARD IC001 SYSTEM IO-BDAT REF 3 72 I-HLDWN 78 I-Prot 53 A BOARD IC002 MEMORY 5 BDA O-LED 79 DISPLAY +B overcurrent (OCP) Occurs when an overcurrent on the +B (135V) line is detected by pin 72 of IC001 (A Board). If the voltage of pin 72 of IC001 (A Board) is less than 1V when V.SYNC is more than seven verticals in a period, the unit will automatically turn off. I-Prot Occurs when an absence of the vertical deflection pulse is detected by pin 78 of IC001 (A Board). Power supply will shut down when waveform interval exceeds 2 seconds. IK (AKB) If the RGB levels* do not balance within 2 seconds after the power is turned on, this error will be detected by IC001 (A Board). TV will stay on, but there will be no picture. *(Refers to the RGB levels of the AKB detection Ref pulse that detects 1K). KV-27FA310/27FS120/29FA310/29FS120 8 KV-27FA310/27FS120/29FA310/29FS120 SECTION 1: DISASSEMBLY 1-1. REAR COVER REMOVAL (ALL EXCEPT KV-27FA310/29FA310) 4 Screws +BVTP 4X16 TYPE2 TT(B) Rear Cover 2 Screws +BVTP 4X16 TYPE2 TT(B) 2 Screws +BVTP 4X16 TYPE2 TT(B) 2 Screws +BVTP 4X16 TYPE2 TT(B) 5 Screws +BVTP 3X12 TYPE2 TT(B) 1-2. REAR COVER REMOVAL (KV-27FA310/29FA310 ONLY) 3 Screws +BVTP 4X16 TYPE2 IT3 Rear Cover 3 Screws +BVTP 4X16 TYPE2 IT3 3 Screws +BVTP 4X16 TYPE2 IT3 5 Screws +BVTP 3X10 TYPE2 IT3 KV-27FA310/27FS120/29FA310/29FS120 6 Screws +BVTP 4X16 TYPE2 IT3 9 KV-27FA310/27FS120/29FA310/29FS120 1-3. CHASSIS ASSEMBLY REMOVAL (ALL EXCEPT KV-27FA310/29FA310) Claw Chassis Assembly 1-4. CHASSIS ASSEMBLY REMOVAL (KV-27FA310/29FA310 ONLY) Claw Chassis Assembly KV-27FA310/27FS120/29FA310/29FS120 10 KV-27FA310/27FS120/29FA310/29FS120 1-5. SERVICE POSITION (ALL EXCEPT KV-27FA310/29FA310) 1 Press on catch tab to release A Board. 2 Disconnect cables as needed to allow A Board to be removed. V Board CW Board D Board HS Board A Board 1-6. SERVICE POSITION (KV-27FA310/29FA310 ONLY) 1 Press on catch tab to release A Board. 2 Disconnect cables as needed to allow A Board to be removed. CW Board V Board GD Board K Board HU Board KV-27FA310/27FS120/29FA310/29FS120 A Board 11 KV-27FA310/27FS120/29FA310/29FS120 1-7. PICTURE TUBE REMOVAL WARNING: BEFORE REMOVING THE ANODE CAP High voltage remains in the CRT even after the power is disconnected. To avoid electric shock, discharge CRT before attempting to remove the anode cap. Short between anode and CRT coated earth ground strap. 1 10 8 7 3 6 2 5 1. Discharge the anode of the CRT and remove the anode cap. 2. Unplug all interconnecting leads from the deflection yoke, neck assembly, degaussing coils and CRT grounding strap. 3. Remove the CW Board from the CRT. 4. Remove the chassis assembly. 5. Loosen the neck assembly fixing screw and remove. 6. Loosen the deflection yoke fixing screw and remove. 7. Place the set with the CRT face down on a cushion and remove the degaussing coil holders. 8. Remove the degaussing coils. 9. Remove the CRT grounding strap and spring tension devices. 10. Unscrew the four CRT fixing screws [located on each CRT corner] and remove the CRT [Take care not to handle the CRT by the neck]. 4 9 ANODE CAP REMOVAL PROCEDURE WARNING: High voltage remains in the CRT even after the power is disconnected. To avoid electric shock, discharge CRT before attempting to remove the anode cap. Short between anode and coated earth ground strap of CRT. NOTE: After removing the anode cap, short circuit the anode of the picture tube and the anode cap to either the metal chassis, CRT shield, or carbon painted on the CRT. REMOVAL PROCEDURES c b a Anode Button Turn up one side of the rubber cap in the direction indicated by arrow a . Use your thumb to pull the rubber cap firmly in the direction indicated by arrow b . HOW TO HANDLE AN ANODE CAP When one side of the rubber cap separates from the anode button, the anode cap can be removed by turning the rubber cap and pulling it in the direction of arrow c . 1. Do not use sharp objects which may cause damage to the surface of the anode cap. 2. To avoid damaging the anode cap, do not squeeze the rubber covering too hard. A material fitting called a shatter-hook terminal is built into the rubber. 3. Do not force turn the foot of the rubber cover. This may cause the shatter-hook terminal to protrude and damage the rubber. KV-27FA310/27FS120/29FA310/29FS120 12 KV-27FA310/27FS120/29FA310/29FS120 SECTION 2: SET-UP ADJUSTMENTS The following adjustments should be made when a complete realignment is required or a new picture tube is installed. These adjustments should be performed with rated power supply voltage unless otherwise noted. Set the controls as follows unless otherwise noted: VIDEO MODE: Pro PICTURE CONTROL: Normal BRIGHTNESS CONTROL: Normal 2-1. BEAM LANDING Before beginning adjustment procedure: 1. Feed in the white pattern signal. Perform the adjustments in order as follows: 1. Beam Landing 2. Convergence 3. Focus 4. Screen (G2) 5. White Balance Note Test Equipment Required: 1. Color Bar Pattern Generator 2. Degausser 3. DC Power Supply 4. Digital Multimeter 6. Switch over the raster signal to red and blue and confirm the condition. 7. When the position of the deflection yoke is determined, tighten it with the deflection yoke mounting screw. 8. If landing at the corner is not right, adjust by using the disk magnets. Adjustment Procedure 1. Input a raster signal with the pattern generator. 2. Loosen the deflection yoke mounting screw, and set the purity control to the center as shown below: Purity Control Purity control corrects this area. 3. Turn the raster signal of the pattern generator to green. 4. Move the deflection yoke backward, and adjust with the purity control so that green is in the center and red and blue are even on both sides. Disk magnets or rotatable disk magnets correct these areas (a-d). a b c d Deflection yoke positioning corrects these areas. b d Blue Red Green a c 5. Move the deflection yoke forward, and adjust so that the entire screen becomes green. KV-27FA310/27FS120/29FA310/29FS120 13 KV-27FA310/27FS120/29FA310/29FS120 2-2. CONVERGENCE Horizontal Static Convergence Before starting convergence adjustments: 1 Perform FOCUS, VLIN and VSIZE adjustments. 2. Set BRIGHTNESS control to minimum. 3. Feed in dot pattern. If the blue dot does not converge with the red and green dots, perform the following: 1. Move H STAT VR magnet (a) to correct insufficient H.Static convergence. H STAT VR Vertical Static Convergence 1. Adjust V. STAT magnet to converge red, green and blue dots in the center of the screen. Center dot R G B V.STAT PURITY BMC MAGNET RV2750 H.STAT RG B V.STAT magnet 2. Tilt the V. STAT magnet and adjust static convergence to open or close the V. STAT magnet. When the V. STAT magnet is moved in the direction of arrow a and b, red, green, and blue dots move as shown below: 1 a B G a b b b B G R R 2 a a R b b B 3 b GB GR a a b B R b KV-27FA310/27FS120/29FA310/29FS120 G G B R 14 KV-27FA310/27FS120/29FA310/29FS120 Dynamic Convergence Adjustment Before performing this adjustment, perform Horizontal and Vertical Static Convergence Adjustment. 1. Slightly loosen deflection yoke screw. 2. Remove deflection yoke spacers. 3. Move the deflection yoke for best convergence as shown below: G R B G B R R G B B G 4. Adjust XCV core to balance X axis. 5. Adjust YCH VR to balance Y axis. 6. Adjust vertical red and blue convergence with V.TILT (TLV VR.) Note: Perform adjustment 3-6 while tracking items 1 and 2. R B G G BR R B TLH+ (R)(B) (B)(R) TLH- B R R Screen-Corner Convergence B G R R G B 1. Affix a permalloy assembly corresponding to the misconverged areas: a b a B R G B R R B a-d: screen-corner misconvergence G G G b R B c d 4. Tighten the deflection yoke screw. 5. Install the deflection yoke spacers. d c 2-3. FOCUS TLH Plate Adjustment 1. Adjust FOCUS control for best pictures. 1. Input crosshatch pattern. 2. Adjust PICTURE QUALITY to standard, PICTURE and BRIGHTNESS to 50%, and OTHER to standard. 3 Adjust the Horizontal Convergence of red and blue dots by tilting the TLH plate on the deflection yoke. Focus (FV) Screen (G2) RV2750 TLH Plate V.STAT CW Board XCV YCH TLV (TLV) KV-27FA310/27FS120/29FA310/29FS120 15 KV-27FA310/27FS120/29FA310/29FS120 2-4. SCREEN (G2) 2-6. WHITE BALANCE ADJUSTMENTS 1. Input a dot pattern. 2. Set the PICTURE and BRIGHTNESS controls at minimum and COLOR control at normal. 3. Adjust SBRT, GCUT, BCUT in service mode with an oscilloscope as shown below so that voltages on the red, green, and blue cathodes are 160 ± 2VDC. 1. Input an entire white signal with burst. 2. Set to Service Adjustment Mode. 3. Set the PICTURE and BRIGHTNESS to minimum. 4. Adjust with SBRT if necessary. 5. Select GCUT and BCUT with 1 and 4 . 6. Adjust with 3 and 6 for the best white balance. 7. Set the PICTURE and BRIGHTNESS to maximum. 8. Select GDRV and BDRV with 1 and 4 . 9. Adjust with 3 and 6 for the best white balance. 10. Press MUTING then ENTER to save into the memory. 160 ±– 2VDC Pedestal Ground 4. Observe the screen and adjust SCREEN (G2) VR in FBT to obtain the faintly visible background of dot signal. 2-5. METHOD OF SETTING THE SERVICE ADJUSTMENT MODE Service Mode Procedure 1. Standby mode (power off). 2. Press Display Channel 5 Sound Volume + Power on the Remote Commander (press each button within a second). Service Adjustment Mode On 1. The CRT displays the time being adjusted. service Signal Type Display Item Category Mode defl hsiz Display Item 16 ntsc vchp 00000000 00000000 2. Press 1 or 4 on the Remote Commander to select the time. 3. Press 3 or 6 on the Remote Commander to change the data. 4. Press MUTING then ENTER to save into the memory. Service Adjustment Mode Memory Turn the set off then on to exit Service Adjustment Mode. Mode Category service Signal Type defl Display Item Item Data hsiz MUTING Green ENTER Red write ntsc vchp 16 00000000 00000000 KV-27FA310/27FS120/29FA310/29FS120 16 KV-27FA310/27FS120/29FA310/29FS120 SECTION 3: SAFETY RELATED ADJUSTMENTS 3-1. X R564 CONFIRMATION METHOD (HV HOLD-DOWN CONFIRMATION) AND READJUSTMENTS Hold-Down Readjustment If the setting indicated in Step 2 of Hold-Down Operation Confirmation cannot be met, readjustment should be performed by altering the resistance value of R564 component marked with X. The following adjustments should always be performed when replacing the following components which are marked with Y on the schematic diagram: Part Replaced (Y) DY, T585, CRT, IC001, IC561, IC600, IC604, C506, C507, C508, C510, C511, C513, C514, L588, D566, D567, D568, PH602, R526, R564, R565, R566, R851, T510, T511……....A Board T585 FBT Adjustment (X) ammeter 3.0 mA DC range HV HOLD-DOWN R564 ABL + A - IABL Preparation Before Confirmation 1. Using a Variac, apply AC input voltage: 120 ± 2 VAC. 2. Turn the POWER switch ON. 3. Input a white signal and set the PICTURE and BRIGHTNESS controls to maximum. 4. Confirm that the voltage between C566 (+) or TP30 and ground is more than 99VDC. Hold-Down Operation Confirmation 1. Connect the current meter between Pin 11 of the FBT (T585) and the PWB land where Pin 11 would normally attach (See Figure 1 on the next page). 2. Input a dot signal and adjust the ABL current to follow with the PICTURE and BRIGHTNESS control: IABL = 140 ± 100µA. 3. Confirm the voltage of A Board TP-23 is 135.6 ± 1.0VDC. 4. Connect the digital voltmeter and the DC power supply via Diode 1SS119 to C566 (+) and ground (See Figure 1 on next page). 5. Increase the DC power voltage gradually until the picture blanks out. 6. Turn DC power source off immediately. 7. Read the digital voltmeter indication (Standard 114.6 +OVDC/-0.3DC). 8. Input 100 IRE White Signal and adjust the ABL current to follow with the PICTURE and BRIGHTNESS control: IABL = 1820µA ± 200µA. 9. Repeat steps 4 through 7. KV-27FA310/27FS120/29FA310/29FS120 3-2. B+ VOLTAGE CONFIRMATION AND ADJUSTMENT Note: The following adjustments should always be performed when replacing the following components, which are marked with Y on the schematic diagram on the A Board: A BOARD: Y IC604, PH602 1. 2. 3. 4. Using a Variac, apply AC input voltage: 130 + 2.0 / - 0.0 VAC. Input a DOT pattern at Q.C. Set the PICTURE and the BRIGHTNESS controls to minimum. Confirm the voltage of A Board between TP-23 & Ground is =135.6 ± 1VDC. 5. If step 4 is not satisfied, replace the components listed above, then repeat steps 1 throught 3. 17 KV-27FA310/27FS120/29FA310/29FS120 FIGURE 1 POWER SUPPLY DIGITAL MULTIMETER + + - - 1SS119 X R564 C566 ) ( Q402 R534 PS401 R533 R408 C540 R511 R537 H.PROT JR12 R437 R609 R566 HS522 R557 Q521 C562 C529 D526 L525 E B R546 C511 D545 C525 C544 IC561 6 R510 C526 C512 2 R548 C545 C527 T511 R902 R540 7 R549 C548 L515 B TP17 D630 L582 R583 JR505 C582 R514 R504 R598 C505 C504 R512 R588 6 0 R591 C595 D598 E R593 TP19 3 1 HE ATE R GN D Q590 R569 R574 1 R502 B D569 R526 IC545 R901 C514 C590 R570 L516 C502 TP24 R568 D568 D567 TP16 V.O UT C547 R541 R515 C513 R503 C597 R547 D006 D562 TP25 C571 1 L511 L513 R575 C561 L371 R589 D528 R529 R532 C451 TP33 D566 Q522 C530 C651 C625 R528 TP30 L370 IC565 C528 C212 R411 R594 GN D - 13 V 2 00V TP31 G ND C624 L588 E N/C H DT 4 6 GN D VD Y+ T505 R506 + 13V TP21 T585 135V VD Y- D601 R505 602 TP23 TP27 H-OUT Q505 B E N /C H-OUT Q506 TP28 ABL H-O UT TP20 HD YC510 TP22 C506 C610 FBT HD Y- C HDY + C618 D506 R581 602 604 C640 HDY + D624 TP29 CN515 TP23 AMMETER 3mA dc range A + - KV-27FA310/27FS120/29FA310/29FS120 18 KV-27FA310/27FS120/29FA310/29FS120 SECTION 4: CIRCUIT ADJUSTMENTS Electrical AdjustmenTs by Remote Commander Use the Remote Commander (RM-Y180, RM-Y195) to perform the circuit adjustments in this section. Test Equipment Required: 1. Pattern generator 2. Frequency counter 3. Digital multimeter 4. Audio oscillator 4-1. SETTING THE SERVICE ADJUSTMENT MODE 4-2. MEMORY WRITE CONFIRMATION METHOD 1. Standby mode (Power off). 2. Press the following buttons on the remote commander within a second of each other: Display Channel 5 Sound Volumne + Power 1. After adjustment, pull out the plug from the AC outlet, then replace the plug in the AC outlet again. 2. Turn the power switch ON and set to Service Mode. 3. Call the adjusted items again to confirm they were adjusted. Service Adjustment Mode On 4-3. REMOTE ADJUSTMENT BUTTONS AND INDICATORS 1. The CRT displays the item being adjusted. Item Display Data Item # 41 Signal Category Type DEF Display Item NTSC 1 NVM OK POWER MUTING (Service Mode) (Enter into memory) DISPLAY H SIZE (Service Mode) M65582AMF-101FPZ0 2. Press 1 or 4 on the Remote Commander to select the item. 3. Press 3 or 6 on the Remote Commander to change the data. 4. Press MUTING then ENTER to write into memory. Service Adjustment Mode Memory Mode Category service Signal Type defl Display Item Item Data hsiz 16 3 Item (Data up) 1 Disp. (Item up) 6 Item (Data down) 2 (Device Item Up) 5 (Device item down) 4 Disp. (Item down) ENTER (Enter into memory) write ntsc vchp 00000000 00000000 8 (Initialize) 0 (Remove from memory) 1. Press 8 then ENTER on the Remote Commander to initialize. Mode service Signal Type Display Item Category defl hsiz VOLUME (+) (Service Mode) 16 RM-Y180 write ntsc vchp Item Data 00000000 00000000 Carry out Step 1 when adjusting IDs 0-7 and when replacing and adjusting IC002 2. Press MUTING then ENTER to write into memory. 3. Turn set off then on to exit Service Adjustment Mode. KV-27FA310/27FS120/29FA310/29FS120 19 KV-27FA310/27FS120/29FA310/29FS120 4-4. SERVICE DATA LISTS Fix/ Var No. Name VERSION Fix VAR VAR VAR VAR VAR VAR VAR VAR VAR VAR VAR VAR VAR VAR VAR VAR FIX 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 VER HSIZ HPOS VSIZ VPOS VLIN SCOR VBOW VANG TRAP PAMP UPIN LPIN TROT HBLK RBLK LBLK VBLK FIX 18 HMSK FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX 19 20 21 22 23 24 25 26 27 28 29 30 31 HDW AFC AFC1 AFCW CDMD HSS VSS SLDN SLUP JPSW HOSC EHT EHTG DEF Service Group KV-27FA310/27FS120/29FA310/29FS120 Description Microprocessor version information H-SIZE ( EW DC : YUV OFFSET ) H POSITION: YUV OFFSET V RAMP SIZE: YUV OFFSET V POSITION (RAMP DC) NOT USEFUL: YUV OFFSET V LINEARITY S CORRECTION BOW ANGLE EW TRAPESIUM PARABOLA ( EW PIN ) UPPER CORNER ( UPPER PIN ) LOWER CORNER ( LOWER PIN ) TROT FBPBLK ( H BLK MODE SELECT ) HBLK R POS ( HBLK REAR TIMING: YUV OFFSET ) HBLK F POS ( HBLK FRONT TIMING: YUV OFFSET ) VBLK POS ( V BLK WIDTH ) Macro OFF ( TOP VEND [ WHEN MACROVISION ] PREVENT OFF ) IIC_HOUT_DUTY ( H PULSE WIDTH [ 25u/19u ] H AFC Gain ( AFC GAIN ) H Charge pump ( AFC1 TIME CONSTANT ) AFC1 PULLIN ( AFC1 PULL IN WIDE ) V CD MODE ( V DET WINDOW SW TIMING ) SYNC SLICE LVL(H) ( SYNC SLICE LEVEL [ H sepa ] ) SYNC SLICE LVL(L) ( SYNC SLICE LEVEL [ V sepa ] ) AUTO SLICE DOWN ( AUTO SLICE LEVEL DOWN ) AUTO SLICE UP ( AUTO SLICE LEVEL UP ) VJPSW ( JUMP SW ) H VCO FOR OFFSET ADJUST OFFSET EHT EHT GAIN ( EHT MODE ) NTSC Init Data = 47 36 28 37 32 49 31 37 24 49 31 30 109 0 15 41 0 0 1 0 3 0 1 0 3 0 0 0 7 4 1 20 KV-27FA310/27FS120/29FA310/29FS120 16 : 9 Service Group Fix/ Var No. Name VAR VAR VAR VAR VAR VAR VAR VAR VAR VAR VAR 1 2 3 4 5 6 7 8 9 10 11 VSIZ VPOS VLIN SCOR TRAP PAMP UPIN LPIN ABLG SCON VPW KV-27FA310/27FS120/29FA310/29FS120 Item name & ( Description ) V RAMP SIZE V POSITION ( RAMP DC ) V LINEARITY S CORRECTION EW TRAPESIUM PARABOLA ( EW PIN ) UPPER CORNER ( UPPER PIN ) LOWER CORNER ( LOWER PIN ) ABL GAIN SUB CONTRAST LEVEL JUMP PULSE WIDTH NTSC Init Data 48 40 26 24 22 24 31 31 15 13 1 21 KV-27FA310/27FS120/29FA310/29FS120 VP1 Service Group Fix/ Var No. Name VAR VAR VAR VAR VAR VAR VAR VAR VAR VAR FIX FIX FIX 1 2 3 4 5 6 7 8 9 10 11 12 13 RDRV GDRV BDRV RCUT GCUT BCUT SCON SHUE SCOL SBRT RON GON BON FIX 14 BLLV FIX FIX VAR VAR VAR FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 KV-27FA310/27FS120/29FA310/29FS120 Item name & ( Description ) R DRIVE G DRIVE: GDOF OFFSET ( only Color Temp. "Warm") B DRIVE: BDOF OFFSET ( only Color Temp. "Warm") HARDWARE AKB (R) CMP DATA HARDWARE AKB (G) CMP DATA HARDWARE AKB (B) CMP DATA SUB CONTRAST LEVEL SUB TINT (HUE) SUB COLOR LEVEL SUB BRIGHTNESS R OUTPUT ON ( 0:R OUTPUT OFF 1:R OUTPUT ON ) G OUTPUT ON ( 0:R OUTPUT OFF 1:R OUTPUT ON ) B OUTPUT ON ( 0:R OUTPUT OFF 1:R OUTPUT ON ) BLUE STRETCH ( 00:NO<->11:DEEP ) only Color Temp "Cool" MTRX MATRIX RATIO SELECT AXIS R-Y PHASE SELECT SSHO SUB SHARPNESS GAIN (OVER) RF/VIDEO SSHP SUB SHARPNESS GAIN (PRE) RF/VIDEO SHPF SHARPNESS FOR ( 00:2 CLK <-> 11:5 CLK ) SHCL SHARPNESS CORING LEVEL SHMX SHARPNESS LIMITER LEVEL ACLV ACL GAIN AKBD AKB SELF DIAGNOSTIC COUNTER (@1 SEC) AKBS AKB SWITCH ( 0:AKB OFF 1:H/W AKB ON ) REFP AKB REFPLS TIMING YNRC YNR LIMITER LEVEL BKON BLACK STRETCH ON BKAT BLACK STRETCH DETECTOR TIME CONSTANT1 BKRC BLACK STRETCH DETECTOR TIME CONSTANT2 BKDP BLACK STRETCH DEPTH BKSP BLKSTPNT BLACK STRETCH POINT NTSC Init Data 64 45 45 120 91 87 19 7 14 13 1 1 1 Video YUV 16:09 64 45 45 120 91 87 19 7 14 13 64 48 44 120 90 105 19 7 24 15 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 25 30 0 25 30 0 N/A N/A N/A 1 0 52 10 15 1 0 15 0 2 1 0 15 1 15 4 soft cont'l 2 22 KV-27FA310/27FS120/29FA310/29FS120 VP2 Service Group Fix/ Var No. FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX 1 2 3 4 5 6 7 8 9 10 11 VMOF VMLO VMHI VMDL VMPL VMWD VMCL VMMX CKLV CKON ALFA FIX 12 YCMD FIX FIX FIX FIX FIX FIX FIX FIX FIX VAR VAR VAR VAR VAR FIX 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 VACL VAGA VAMX GAMM YDLY CDLY YOFF CBPF BGPP GDOF BDOF GCOF BCOF DCTV DCTG KV-27FA310/27FS120/29FA310/29FS120 Name Item name & ( Description ) VM GAIN(Off) ( VM LEVEL AT "OFF" SETTING ) VM GAIN(Low) ( VM LEVEL AT "LOW" SETTING ) VM GAIN(High) ( VM LEVEL AT "HIGH"SETTING ) VM DELAY ( VM DELAY ) VM POL ( VM POLARITY ) VM WIDTH ( VM WIDTH ) VM CORING LEVEL ( VM CORING LEVEL ) VM MAX ( VM LIMITER LEVEL ) KILLER LEVEL ( VM COLOR KILLER VTH ) FORCE KILLER ( FORCE KILLER ) ALFA ( ADAPTIVE DET SENSITIVITY ) MANEXP ( YC SEPA FORCE SELECT [ 00:ADAPTIVE 01:H 10:V 11:HV ] ) V APERTURE CORING LV ( V APERTURE CORING LEVEL ) V APERTURE GAIN ( V APERTURE GAIN LEVEL ) V APERTURE MAX GAIN (V APERTURE LIMITER LEVEL) GAMMA ( GAMMA [ 00:NO <-> 11:DEEP ] ) Y DELAY ( Y DELAY TIME ) C DELAY ( C DELAY TIME ) Y Mute ( Y OUTPUT MUTE ) SAW FILTER(7.2MHzBPF) ( C BPF FOR HI ) BGP POS ( BGP [ FOR C DECODER ] TIMING ) G DRIVE OFFSET only Color Temp. "Warm" B DRIVE OFFSET only Color Temp. "Warm" G CUT CMP DATA OFFSET only Color Temp. "Warm" B CUT CMP DATA OFFSET only Color Temp. "Warm" DCTRAN VTH<6:0> ( DCTRANSFER VTH ) DCTRAN GAIN<4:0> ( DCTRANFER GAIN ) NTSC Init Data 2 4 7 6 0 0 0 15 1 0 2 Video YUV 16:09 1 0 N/A 1 3 N/A 9 28 N/A 0 0 soft cont'l 5 soft cont'l 1 0 0 0 9 9 14 11 28 30 soft cont'l 23 KV-27FA310/27FS120/29FA310/29FS120 NR Service Group PALLET Service Group Fix/ Var No. VAR VAR VAR FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Name SCOL SHCL SHMX YNRC VMHI VMCL VMMX VAMX GAMM YNRS WSTH WSVA WSCA NRCH NRCL NRVL NRVH IPNC IPNV Fix/ Var No. Name FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX 1 2 3 4 5 6 7 8 9 10 11 12 VPIC VBRI VCOL VHUE VSHA VVM VTRI VAPA VGMA VDCT VBKP TBKD KV-27FA310/27FS120/29FA310/29FS120 Item name & ( Description ) SUB COLOR LEVEL SHARPNESS CORING LEVEL SHARPNESS LIMITER LEVEL YNR LIMITER LEVEL VM LEVEL AT " HIGH " SETTING VM CORING LEVEL VM LIMITER LEVEL V APERTURE LIMITER LEVEL GAMMA ( 00: NO < - > 11:DEEP) YNR ON WEAK SIGNAL VTH WEAK SIGNAL VIDEO ATT WEAK SIGNAL CHROMA ATT THRNZV1( NOISE DET TIME CONSTANT ) THRNZV2 ( NOISE DET TIME CONSTANT ) THRNZH1 ( NOISE DET VTH ) THRNZH2 ( NOISE DET VTH ) DETNZ STATUS COUNTER DETECTION PERIOD Item name & ( Description ) PICTURE BRIGHTNESS COLOR HUE SHARPNESS VM COLOR TEMP APERTURE G GAMMA DCT LV BLACK STRETCH DEPTH ( VIDEO ) BLACK STRETCH DEPTH ( TUNER ) NTSC Init Data 14 15 7 7 10 0 7 0 0 1 7 0 5 0 16 2 0 2 10 PALLET = VIVID 63 27 37 31 31 2 0 5 3 23 3 3 NTSC BA6 DATA (DEC) PALLET PALLET = STD = MOVIE 50 37 30 31 32 31 31 31 32 31 1 0 1 2 5 3 1 0 15 2 3 4 3 4 PALLET = PRO 31 31 31 31 21 0 1 0 0 2 7 7 24 KV-27FA310/27FS120/29FA310/29FS120 Y Service Group C Service Group Fix/ Var No. Name Item name & ( Description ) FIX FIX FIX FIX 1 2 3 4 YNRS YTHR Y2D 2DFX FIX 5 CLPS FIX FIX FIX FIX FIX FIX 6 7 8 9 10 11 VLPF CLPF BPFB BPFF BKTS VMG2 FIX 12 CLPT YNR SW ( YNR ON) Y THR 2D ( Y SIGNAL THROUGH 2DYCS ) Y2D Fix ( Y SIGNAL GENERATE from 2DYCS ) C BPF Fix ( C SIGNAL GENERATE from H/V BPF only CLAMP CONTROL SW ( 0: CLAMP OFF. 1: CLAMP AUTO. 2: CLAMP ON ] VIDEO LPF ( Y_LPF [ ANALOG ] for adjust ) CHROMA LPF ( C_LPF [ ANALOG ] for adjust ) YCS HBPF BACK ( YCS HBPF SELECT [ BACK ] ) YCS HBPF FRONT ( YCS HBPF SELECT [ FRONT ] ) BS T2 IFON ( BLACK STRETCH RECOVER TIME OUT VMGAIN2 ( MODULATOR FEEDBACK GAIN CONTROL CLAMP KEEP TIMER ( CLAMP AUTO ON KEEP TIMER COUNT [ @ 100 MS ] ) Fix/ Var No. Name FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 A1FL A1ON ACCS AASL BASL XFFR A2ON A3ON A2FL A3FL AXTH ACTH AVAV B2TH ACCP KV-27FA310/27FS120/29FA310/29FS120 Item name & ( Description ) AMP OFF1 L ( ANALOG ACC hysteresis ) AMP ON ( ANALOG ACC AMP ON LEVEL) ACC SW ( ACC ON/OFF ) AVE SEL ( C DECODER TIME CONSTANT [32, 16, 8, 1H ]) B2AVE SEL ( ACC TIME CONSTANT ) FREE RUN ( VCXO FORCE FREERUN ) AMP2 ON Thresh ( ABL VTH ) AMP3 ON Thresh ( ACL VTH ) AMP2 OFF Thresh L ( AMP2 OFF LEVEL LOWER ) AMP3 OFF Thresh L ( AMP3 OFF LEVEL LOWER ) AXIS HYS ( AXS HYS ) ROM HYS ( ROM HYS ) AVE SEL AV (AVE SEL AV ) B2COMP ( B2COMP ) ACC COMP ( ACC COMP ) NTSC Init Data 0 0 0 1 1 3 3 1 1 0 3 15 A8 Init Data 90 4 0 2 0 0 4 4 64 64 30 10 3 0 0 Video YUV 16:09 0 1 N/A 0 1 N/A 25 KV-27FA310/27FS120/29FA310/29FS120 RGB Service Group NTSC Fix/ Var No. FIX FIX FIX FIX 1 2 3 4 FIX 5 FIX 6 FIX 7 FIX 8 FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 KV-27FA310/27FS120/29FA310/29FS120 Name Item name & ( Description ) RGB POWER ON MUTE ( RGB POWER ON MUTE ) RGB Mute before OSD ( RGB MUTE [ EXCEPT OSD ] CUTOFF R L ( R CUTOFF LOWER ) CUTOFF R H ( R CUTOFF UPPER ) CUTOFF G L ( G CUTOFF LOWER WHEN TEMP IS "COOL" AND COGL "NEUTRAL" CUTOFF G H ( G CUTOFF LOWER WHEN TEMP IS "COOL" AND COGH "NEUTRAL" CUTOFF B L ( B CUT OFF LOWER WHEN TEMP IS "COOL" AND COBL "NEUTRAL" CUTOFF B H ( B CUT OFF LOWER WHEN TEMP IS "COOL" AND COBH "NEUTRAL" ABLS ABL SEL ( ABL SELECT ) ALSP ACL SPEED ( ACL SPEED ) ALRS ACL SPE ( ACL RECOVER SPEED ) ALAS ACL ASPE ( ACL ATACK SPEED ) ABLG ABL GAIN ( ABL GAIN ) ALS2 ACLASPE2 ( ACL ATACK SPEED [ 2 ] ) AKBM AKB MODE ( AKB MODE ) AKBP AKB P[5:0] ( AKB PULSE HEIGHT ) OSDL OSD LIMIT ( OSD LIMMIT SELECT ) UVIN Y/U/V UVINV ( U/V INVERT ) UVG U/V GAIN ( U/V OFFSET CANCELER ON ) UOFS U IN OFFSET ( U IN OFF SET ) VOFS V IN OFFSET ( V IN OFFSET ) AALG ANA ACL GAIN ( ANALOG ACL GAIN CONTROL ) AALS ANA ACL ON ( ANALOG ACL ON/OFF CONTROL) UVDE UV_DITHER_EN ( UVIN DITHER ENABLE ) UVDT UV_DITHER_TEST ( UVIN DITHER TEST ) AMUT PMUT CORL CORH Init Data 0 1 212 0 Video YUV 16:09 0 0 1 6 N/A N/A 197 0 176 0 0 0 2 9 5 2 0 16 0 0 0 15 12 0 1 0 0 26 KV-27FA310/27FS120/29FA310/29FS120 Fix/ Var No. DEFD NTSC Init Data 0 0 0 Service Group FIX FIX FIX 1 2 3 HFFR HFUP JSWW AFC FREE RUN ( AFC1 FORCE FREE RUN ) HFREE UP ( H FREE RUN FREQUENCY UP [ 700 Hz ] VJP WIDTH ( JUMP PULSE WIDTH ) FIX 4 EWCL V/EW DAC CLK CONTROL ( EW/VRAMP DA CLOCK SELECT ) 0 FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 XF0A BGST XPHA HRMP RPLU RPLB XF0B RPLS SSM VSAG AFC2 VRFL SSLP XPLU 8FSC 4FS2 CDM2 BGPC MHDL BFRE FREE RUN OFFSET ( VCXO FREE RUN ADJUST) BG START ( BGP [ FOR PLL ] TIMING ) VCXO CTL ( VXCO PHASE ADJUST ) Ramp Slew Rate ( AFC2 TIME CONSTANT ) Ref Charge pump ( REF PLL TIME CONSTANT ) Ref VCO ( REF PLL TIME CONSTANT ) VCXO FREE RUN ( VXCO Fo ADJUST ) REF FB SW ( REF VCO FB LOOP SELECT ) Sync Sepa Mask ( SyncSepaMasking CONTROL ) V-sag ( V-SAG prevent ON ) AFC2 Gain ( AFC2 GAIN CONTROL ) V RAMP FIL OFF ( V RAMP FILTER SWITCHING OFF ) LPY SYNC ( LFP pre SYNC SEPA ON/OFF B PLL Change pump ( ACP TIME CONSTANT ) 8FSC SEL ( 8fsCLK Skew OFF ) 4FSC SEL2 ( 4fsCLK Skew OFF ) V_CD_MODE2 ( V_LOGIC SW ) Add. FTN BGP C ( BGP C ) Add. FTN BGP SEL ( BBP SEL ) V FREE ( FORCE V FREE RUN ) 0 16 10 3 3 1 0 0 0 0 3 1 1 1 1 1 1 0 1 0 FIX 25 HRPP AFC2 RAMP POS ( FRAMP RRAMP H OUT CONTROL RANGE 8 FIX FIX FIX 26 27 28 DSCK VBHK VPW 1 0 1 FIX 29 DTH FIX 30 SLON CLOCK SEL ( DS DAC CLK SW 2 ) VBLK HALFKIL ( V BLK HALF KILL ) V PLS WIDTH ( V Pulse Wide ) D THRESHOLD LEVEL ( DITHER THRESHOLD LEVEL CONTROL AT IIC AUTOD= ON LPF SYNC ON ( LPF SYNC ON ) KV-27FA310/27FS120/29FA310/29FS120 Name Item name & ( Description ) Video YUV 16:09 0 0 N/A 16 1 N/A 1 1 0 0 N/A N/A 1 1 0 0 1 27 Service Group Fix/ Var No. DEFD KV-27FA310/27FS120/29FA310/29FS120 FIX 31 VSSW FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX 32 33 34 35 36 37 38 39 40 41 AF2S VSL2 VSL1 VYUV VYVP VYHS VYHP VSHE VYRB VYLB Fix/ Var No. FIX 1 FIX 2 FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX 3 4 5 6 7 8 9 10 11 12 pedestal CLAMP ON/OFF ( SYNC TIP/PEDESTAL CLAMP SELECT ) VRT Voltage ( ADC REFERENCE [ 00:1.15Vpp 01:1.25 Vpp VRT 10:1.35 Vpp 11:1.45 Vpp ] ) 14HI INV 14H CLK ( 4fsc [ Skew ] CLK POLARITY ) 14HD 14H CLK DLY ( 4fscCLK [ Skew ] CLK DELAY ADJUST ) INV DS CLK ( 8fscCLK POLARITY ) DSI DSD DS CLK DLY ( 8fscCLK DELAY ADJUST ) ADCD AD CLK DLY ( ADC CLK DELAY ADJUSTO ) 4FSC 4FSC SW ( AD/LOGIC CLK SWAP ) WSTH WEAK_SIG_VTH ( WEAK_SIGNAL VTH ) WSVA WEAK SIG VIDEO ATT ( WEAK SIGNAL VIDEO ATT ) WSCA WEAK SIG CHROMA ATT (WEAK SIGNAL CHROMA ATT) VREF VREF_SEL ( AD REFERENCE SELECT [ VZ ] ) Fix/ Var No. Name FIX FIX FIX FIX FIX 1 2 3 4 5 HT OSLR OSLG OSDC OSLB OTHER Service Group OSD Service Group KV-27FA310/27FS120/29FA310/29FS120 Name Name Item name & ( Description ) SYNC SLICE LVL(V)_W ( SYNC SLICE LEVEL [ V ] Wide Window AFC2_SEL ( ADC2 TIMING SW ) V_SYNC_LPF_2 ( DIGITAL V_SINC_LPF [ Fall ] ) V_SYNC_LPF_1 ( DIGITAL V_SINC_LPF [ Rise ] ) YUV VSIZE OFFSET ( YUV V-SIZE OFFSET ) YUV VPOS OFFSET ( YUV V-POSITION OFFSET ) YUV HSIZE OFFSET ( YUV H-SIZE OFFSET ) YUV HPOS OFFSET ( YUV H-POSITION OFFSET) V-SHRINK MODE ( V-SHRINK MODE for AV ) YUV RBLK ( YUV RBLK OFFSET ) YUV LBLK ( YUV LBLK OFFSET ) Item name & ( Description ) PCLP Item name & ( Description ) HT ( HALF TONE LEVEL ) OSD LVL R ( R OSD LEVEL ) OSD LVL G ( G OSD LEVEL ) OSD COMP ( OSD COMP ) OSD LVL B ( B OSD LEVEL ) NTSC Init Data Video YUV 16:09 Video YUV 16:09 0 0 0 0 0 0 0 0 0 1 N/A N/A N/A N/A N/A 0 0 0 0 N/A N/A 0 0 0 1 8 8 8 7 0 7 7 NTSC Init Data 0 1 0 0 0 0 0 0 0 0 0 0 NTSC Init Data 0 25 25 0 25 28 KV-27FA310/27FS120/29FA310/29FS120 H/W AKB G INI DATA L ( H/W AKB GREEN OUTPUT LOWER ) soft cont'l H/W AKB G INI DATA H ( H/W AKB GREEN OUTPUT UPPER ) HBIL H/W AKB B INI DATA L (H/W AKB BLUE OUTPUT LOWER) HBIH H/W AKB B INI DATA H (H/W AKB BLUE OUTPUT UPPER) HLM1 AKB_LIM1<7:0> ( H/W AKB LIM1 ) HLM2 AKB_LIM2<7:0> ( H/W AKB LIM2 ) HLM3 AKA_LIM3<7:0> ( H/W AKB LIM3 ) HAD1 AKB_ADD1<7:0> ( H/W AKB SPEED1 ) HAD2 AKB_ADD2<7:0> ( H/W AKB SPEED2 ) HAKE AKB_EN ( H/W AKB MANUAL [ MCU ] / HARD HASP AKB_SPEED ( H/W AKB SPEED ) HERL AKB_SWERR<7:0> ( H/W AKB ERROR DET THRESH ) HLMC AKB_ERRC<7:0> ( H/W AKB ERROR DET TIME ) HPWL AKBSWPON<7:0> ( H/W AKB POWER ON TRESH ) HPWC AKB_PWERRC ( H/W AKB POWER ON TIME ) H/W AKB2 HOLD TIMER ( H/W AKB2 HOLD TIMER (@ HFMT 100 MSEC ) [ 0: No hold ] AKB POW ON MUTE EXIT ( AKB POWER ON MUTE EXIT SPMT TIMMER ) soft cont'l soft cont'l soft cont'l 6 12 21 2 6 1 3 40 20 4 90 Fix/ Var No. Name H/W AKB H/W AKB R INI DATA L ( H/W AKB RED OUTPUT LOWER ) H/W AKB R INI DATA H ( H/W AKB RED OUTPUT UPPER ) NTSC Init Data soft cont'l soft cont'l Service Group FIX FIX 1 2 HRIL HRIH FIX 3 HGIL FIX 4 HGIH FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX FIX 5 6 7 8 9 10 11 12 13 14 15 16 17 FIX 18 FIX 19 KV-27FA310/27FS120/29FA310/29FS120 Item name & ( Description ) 20 120 29 Fix/ Var No. Name VAR VAR VAR VAR VAR VAR VAR VAR VAR VAR VAR VAR VAR VAR VAR VAR VAR 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 SBAL SBAS STRE SRL BBOL BBOH BBSL BBSH BBGL BBGH BBTL BBTH BBDL BBDH VFIX AGCL VCOF Service Group Fix/ Var No. Name VAR VAR VAR VAR VAR VAR VAR 1 2 3 4 5 6 7 BBEL BBEH BBOL BBSL BBGL AGCL DDOF AP2 Service Group AUDIO PROCE SSOR KV-27FA310/27FS120/29FA310/29FS120 KV-27FA310/27FS120/29FA310/29FS120 Item name & ( Description ) SBAL ( SUB BALANCE ) SBAS ( SUB BASS ) STRE ( SUB TREBLE ) SRL ( SURROUND LEVEL ) BBOL ( SURROUND OFF-BBE LOW ) BBOH ( SURROUND OFF-BBE HIGH) BBSL ( SIMULATE BBE LOW ) BBSH ( SIMULATE BBE HIGH ) BBGL ( WOW GAME BBE LOW ) BBGH ( WOW GAME BBE HIGH ) BBTL ( SRS BBE LOW ) BBTH ( SRS BBE HIGH ) BBDL ( Audio Processor Prologic BBE Low for DOLBY ) BBDH ( Audio Processor Prologic BBE High for DOLBY ) VFIX ( AUDIO OUTPUT FIX DATA ) AGCL ( AGC LEVEL ) RF OFFSET DATA Item name & ( Description ) SUB AUDIO PROCESSOR PROLOGIC BBE LOW SUB AUDIO PROCESSOR PROLOGIC BBE HIGH SURROUND OFF-BBE LOW SIMULATE BBE LOW WOW GAME BBE LOW SUB AUDIO PROCESSOR AGC LEVEL DOLBY OFFSET DATA 29FA310 4 0 6 0 8 4 2 4 6 4 0 0 6 4 0 2 9 29FA310 9 9 9 5 10 2 15 NTSC 27/29FS120 4 0 0 0 6 5 4 4 0 0 6 4 0 0 243 2 9 NTSC 27/29FS120 0 0 0 0 0 0 0 30 Service Group Fix/ Var No. MICROPRO CESSOR FIX FIX 1 2 FIX 3 FIX 4 FIX 5 DISP ( OSD HORIZONTAL OFFSET ) CCHP ( FOR TILT DATA CALCULATION ) HRLW ( LOW LIMIT OF H-PULSE COUNTING WINDOW HRLW ] HRLG ( HIGH LIMIT OF H-PULSE COUNTING WINDOW HRHG ] HSDT HSDTCT ( H-PULSE DETECTION [ S-VIDEO ] FIX 6 STPI FIX 7 RAPI Service Group Fix/ Var No. Name Feature KV-27FA310/27FS120/29FA310/29FS120 VAR VAR VAR VAR VAR VAR VAR VAR KV-27FA310/27FS120/29FA310/29FS120 Name NTSC Init Data 55 80 Item name & ( Description ) DISP CCHP ID0 ID1 ID2 ID3 ID4 ID5 ID6 ID7 [ RF [ RF STPI ( GRADUAL CONTRAST INCREASE STARTING LEVEL ) RAPI (GRADUAL CONTRAST INCREASE Vsync COUNTER) Item name & ( Description ) Language related Video related Audio related Miscellaneous Miscellaneous Miscellaneous Miscellaneous Miscellaneous 16 64 8 40 10 NTSC Init Data 81 31 113 130 32 24 48 69 31 KV-27FA310/27FS120/29FA310/29FS120 4-5. ID MAP TABLE Model Destination ID-O ID-1 ID-2 ID-3 ID-4 ID-5 ID-6 ID-7 KV-27FA310 KV-27FA310 KV-27FS120 KV-27FS120 KV-29FS120 KV-29FS120 KV-29FA310 KV-29FA310 US CND US CND L NORTH L SOUTH L NORTH L SOUTH 81 81 89 89 81 81 81 81 31 31 31 31 31 31 31 31 17 17 17 17 17 17 113 113 130 130 34 50 130 130 130 130 32 32 0 0 32 32 32 32 24 24 24 24 24 24 24 24 48 48 0 0 48 48 48 48 69 69 5 5 69 69 69 69 4-6. A BOARD ADJUSTMENTS 7. Adjust the value of SCON with 3 and 6 for 87 ± 2Vpp. H. Frequency (Free Run) Check 87 + 2Vpp 1. Input a TV mode (RF) with no signal. 2. Connect a frequency counter to base of Q502 (TP-25 H. DRIVE) on the A Board. 3. Check H. Frequency for 15735 ± 200 Hz. V. Frequency (Free Run) Check 1. Select video 1 with no signal input. 2. Set the conditions for a standard setting. 3. Connect the frequency counter to TP-27 (V OUT) or CN515 pin 6 (V DY+) and ground on the A Board . 4. Check that V. Frequency shows 60 ± 4 Hz. 8. Reset GON and BON values to “1”. R ON: ON G ON: ON B ON: ON (1) (1) (1) 9. Press MUTING then ENTER to save into the memory. Drive (SCON) 1. 2. 3. 4. Display Position Adjustment (DISP) Input a color-bar signal and set the level to 75%. Set in Pro mode + PICTURE MAX. Activate the Service Adjustment Mode. Set GON and BON items. Using 3 and 6 set each to the following values. Leave RON set to “1”. Mode Signal Type Category service video Display Item rdrv Item Data 1. 2. 3. 4. Input a color-bar signal. Set to Service Adjustment Mode. Select DISP with 1 and 4 . Adjust values of DISP with 3 and 6 to adjust characters to the center. 5. Press MUTING then ENTER to save into the memory. 6. Check to see if the text is displayed on the screen. 26 Mode Category ntsc vchp service micro 00000000 00000000 R ON: G ON: B ON: ON OFF OFF (1) (0) (0) Signal Type Display Item disp Item Data 48 ntsc vchp 00000000 00000000 5. Connect an oscilloscope probe to CW Board, JW2704 (KR). 6. Select SCON with 1 and 4 . KV-27FA310/27FS120/29FA310/29FS120 32 KV-27FA310/27FS120/29FA310/29FS120 Sub Bright Adjustment (SBRT) H. Center Adjustment (HPOS) 1. 2. 3. 4. 5. Perform this adjustment after performing H. Frequency (Free Run) Check. 1. Input a crosshatch signal. 2. Activate the Service Adjustment Mode. 3. Select the HPOS item with 1 and 4 . 4. Adjust the value of HPOS with 3 and 6 for the best horizontal center. 5. Press MUTING then ENTER to save into the memory. Input a monoscope signal. Activate the Service Adjustment Mode. Set the PICTURE and BRIGHTNESS to minimum. Select the SBRT item with 1 and 4 . Adjust the values of SBRT with 3 and 6 to obtain a faintly visible 20 IRE mark, after that increase +3 steps. 6. Press MUTING then ENTER to save into the memory. Sub Hue, Sub Color Adjustment (SHUE, SCOL) 1. 2. 3. 4. 5. 6. Input color-bar signal at 75%. Activate the Service Adjustment Mode. Set (PIC) to Max and (COL) to 50%. Connect an oscilloscope probe to CW Board, JW7408 (Blue Out). Select the SHUE and SCOL item with 1 and 4 . While showing the SHUE item, adjust the waveform with 3 and 6 until the second and third bars show the same level (V2 = V3 < 0.15Vp-p). Set Sub Hue -2 Step. 7. While showing the SCOL item, adjust the waveform with 3 and 6 until the first and fourth bars show the same level (V1 = V4 < 0.15Vp-p). Set Sub Col + 2 Step. H. Size Adjustment (HSIZ) 1. 2. 3. 4. 5. Input a monoscope signal. Activate the Service Adjustment Mode. Select HSIZ with 1 and 4 . Adjust with 3 and 6 for the best horizontal size. Press MUTING then ENTER to save into the memory. V1 V2 V3 V4 8. Press MUTING then ENTER to save into the memory. V. Size Adjustment (VSIZ) 1. 2. 3. 4. 5. Input a crosshatch signal. Activate the Service Adjustment Mode. Select the VSIZ item with 1 and 4 . Adjust value of VSIZ with 3 and 6 for the best vertical size. Press MUTING then ENTER to save into the memory. V. Linearity (VLIN), V. Correction (SCOR), PIN Amp (PAMP), and Horizontal Trapezoid (HTRP) Adjustments 1. 2. 3. 4. 5. Input a crosshatch signal. Activate the Service Adjustment Mode. Select VLIN, SCOR, PAMP, and HTRP with with 1 and 4 . Adjust with 3 and 6 for the best horizontal size. Press MUTING then ENTER to save into the memory. V LINEARITY (VLIN) V CORRECTION (SCOR) V. Center Adjustment (VPOS) Perform this adjustment after performing H. Frequency (Free Run) Check. 1. Input a crosshatch signal. 2. Activate the Service Adjustment Mode. 3. Select the VPOS item with 1 and 4 . 4. Adjust value of VPOS with 3 and 6 for the best vertical center. 5. Press MUTING then ENTER to save into the memory. KV-27FA310/27FS120/29FA310/29FS120 PIN AMP (PAMP) HORIZONTAL TRAPEZOID (HTRP) 33 KV-27FA310/27FS120/29FA310/29FS120 V. Angle (VANG), V. Bow (VBOW), Upper PIN (UPIN) and Low PIN (LPIN) Adjustments 1. 2. 3. 4. 5. Input a crosshatch signal. Activate the Service Adjustment Mode. Select VANG, VBOW, UPIN, and LPIN with 1 and 4 . Adjust with 3 and 6 for the best picture. Press MUTING then ENTER to save into the memory. V ANGLE (VANG) V BOW (VBOW) UPPER PIN (UPIN) LOW PIN (LPIN) Service Adjustment Mode Memory 1. After completing all adjustments, press 0 then ENTER . Read From Memory Mode Category service Signal Type defl Item Data Display Item vbow 7 Green 0 ntsc Red vchp 00000000 00000000 KV-27FA310/27FS120/29FA310/29FS120 ENTER 34 KV-27FA310/27FS120/29FA310/29FS120 SECTION 5: DIAGRAMS 5-1. CIRCUIT BOARDS LOCATION KV-27FS120 Pictured CW Board V Board HR Board & K Board (KV-27FA310/29FA310 Only) A Board HS Board (All Except KV-27FA310/29FA310) HU Board (KV-27FA310/29FA310 Only) 5-2. PRINTED WIRING BOARD AND SCHEMATIC DIAGRAM INFORMATION All capacitors are in µF unless otherwise noted. pF : µµF 50WV or less are not indicated except for electrolytics and tantalums. All electrolytics are in 50V unless otherwise specified. D Board (All Except KV-27FA310/29FA310) GD Board (KV-27FA310/29FA310 Only) The components identified by shading and ! symbol are critical for safety. Replace only with part number specified. The symbol indicates a fast operating fuse and is displayed on the component side of the board. Replace only with fuse of the same rating as marked. All resistors are in ohms. k=1000, M=1000k Indication of resistance, which does not have one for rating electrical power, is as follows: Pitch : 5mm Rating electrical power : 1 1 1 / 4 W in resistance, /10 W and / 8 W in chip resistance. Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. : nonflammable resistor. : fusible resistor. Le symbole indique une fusible a action rapide. Doit etre remplace par une fusible de meme yaleur, comme maque. : internal component. : panel designation and adjustment for repair. : earth ground : earth-chassis All variable and adjustable resistors have characteristic curve B, unless otherwise noted. Readings are taken with a color-bar signal input. Readings are taken with a 10M digital multimeter. Voltages are DC with respect to ground unless otherwise noted. Voltage variations may be noted due to normal production tolerances. All voltages are in V. S : Measurement impossibillity. REFERENCE INFORMATION RESISTOR : RN METAL FILM : RC SOLID : FPRD NONFLAMMABLE CARBON : FUSE NONFLAMMABLE FUSIBLE : RW NONFLAMMABLE WIREWOUND : RS NONFLAMMABLE METAL OXIDE : RB NONFLAMMABLE CEMENT : ADJUSTMENT RESISTOR CAPACITOR : TA TANTALUM : PS STYROL : PP POLYPROPYLENE : PT MYLAR : MPS METALIZED POLYESTER : MPP METALIZED POLYPROPYLENE : ALB BIPOLAR : ALT HIGH TEMPERATURE : ALR HIGH RIPPLE COIL : LF-8L MICRO INDUCTOR : B+line. : B-line. (Actual measured value may be different). : signal path. (RF) Circled numbers are waveform references. KV-27FA310/27FS120/29FA310/29FS120 35 KV-27FA310/27FS120/29FA310/29FS120 The components identified by X in this basic schematic diagram have been carefully factory-selected for each set in order to satisfy regulations regarding X-ray radiation. Should replacement be necessary, replace only with the value originally used. When replacing components identified by Y, make the necessary adjustments as indicated. If the results do not meet the specified value, change the component identified by X and repeat the adjustment until the specified value is achieved. (Refer to Section 3: Safety Related Adjustments on Page 17.) When replacing the parts listed in the table below, it is important to perform the related adjustments. Part Replaced (Y) DY, T585, CRT, IC001, IC561, IC600, IC604, C506, C507, C508, C510, C511, C513, C514, L588, D566, D567, D568, PH602, R526, R564, R565, R566, R851, T510, T511……....A Board KV-27FA310/27FS120/29FA310/29FS120 Adjustment (X) HV HOLD-DOWN R564 36 KV-27FA310/27FS120/29FA310/29FS120 5.3. BLOCK DIAGRAM AND SCHEMATICS IIC Communication Picture Signal Sound Signal Tuning Related Antena Antenna Control Lines Switch Tilt Rotation VM Power Main Tuner ($C0) Power Key FBT CRT Front Panel Keys H-Out Menu Keys DY V-Out IR IO-SDAT O-SCLKN IO-BDAT RGB O-BCLKN I-POWERN I-MENU M24C16 ($A0,$A2,$A4, I-KEY O-LED Stand by/ Timer Led I-RMCN Receiver Amp Monitor Out I-AFT2 $A6,$A8,$AA) I-AFT Reset O-AGCMUTE Video Processor/Comb Filter O-ANTSW Video 4 I-SAP ($??) I-STEREN O-MONO 5V Regulator Micro O-SAP M65582MF-XXXFP I-RESET 5V Stand-by O-SE L0 ($60) Video 3 Video SW O-SE L1 Video 2 9V Regulator I-HLDWN O-NS Energy Star I-MECSVD Low B VCC Video 1 O-MUTE Main Power O-DGC 12.5V O-RELAYN Rectifier Mechanical S-Video Audio Supply Rectifier 14V 21FM210=14V all others=18V Audio Inputs B+ Rectifier AC Line Audio 115V Degauss SW Out Audio Outputs Audio Processor xxxx NJM1134 NJM Mute Audio Amp Audio Amp. TDA8947J TDA8580Q ($82) Dolby Pro Logic TruSurround NJM2180 (THIS SECTION FOR KV-27FA310/29FA310 MODELS ONLY) Cross Over Audio Processor NJW1164 Audio Amp TDA8947J for FA310 models KV-27FA310/27FS120/29FA310/29FS120 37 KV-27FA310/27FS120/29FA310/29FS120 A BOARD SCHEMATIC DIAGRAM 10 SW JW623 * TO-CN1402-GD BOARD AUDIO-VCC 1 2 AUDIO GND 3 AUDIO GND 4 1 3 OCP VC2 30 9 D620 1SS119-25T I G R309 10k R382 3.3M R363 75 R303 3.3M Q604 2SB709A-QRS-TX 12V REG R606 10k R605 10k C612 2.2mF 3 G IC633 LF33CV(STM) 3.3V REG IC003 PST9143NL STBY 5V RESET EMI O L527 D051 1E3-TB TP604 S D618 * C655 * 17 3 16 D615 * FB606 5MM 4 -2 15 C672 * 3.3V 14 6 C647 * 13 FB605 1.1UH D621 * C616 * 7 R647 * PH602 * PHOTOCOUPLER 3 4 FB603 * C610 * 12 C642 * I C632 * C624 * L608 * IC603 * 9V REG R609 3.3 L607 * R619 * D631 * C625 * JW630 * R511 5.0MM R595 470k 1/4W Q590 KTA1279 PROTECT C638 100 25V D644 R593 10k 1/4W R592 100k 1/4W C590 10 L609 50V R590 10k 1/4W D562 1SS133T-77 TP601 2 1 R617 * R616 * C631 * 8 11 9 10 D611 * FB604 * C640 * R618 5.0MM D624 * C617 * C618 * 5 D614 * R667 * C652 * R589 470k 1/4W C526 220p 500V B 4 3 1 R668 * C520 22 50V 0.22 0.033 0.0015 V+ GND CTL SCL CBS VREF CVB SDA CSR CVA CTH AGC OUTB LINEB C407 14 VA SPKR+ 13 12 GND CEXT 11 SPKR- 10 INR4 SUR S GND MODE 1 INL 2 INR3 MODE 2 IN-L1 SPKL- GND VA SPKL+ 9 15 16 17 C423 C421 CN401 4P FB462 5MM FB401 R522 330 1/4W DRIVE- VCC+ 2 3 4 C512 0.001 100V C510 680p R530 5.6k C539 0.01 25V B C529 0.0022 50V CH C511 0.68 6 R529 15k FBT 9V 9V H.DY H.DY V.DY V.DY 3 HDY- 4 HDY- 5 VDY- 6 VDY+ 4 GND 3 GND CN506 4P N.C. TO-CN1800 D BOARD 135V 1 -15V 2 +15V E 4 VD+ 5 HEATER NC 7 200V 2 6 +B CN585 8P TO-CN2751 CWBOARD JR585 0 R548 15k R549 47k JR586 0 HEATER D545 GP08DPKG23 1 C558 1000pF D587 PG104R R597 220k 1/10W R566 100k 1/4W D566 EGP20DPKG2 3 C566 4.7 160V R569 10k 1/4W HV R587 47 1/4W T585 4 C589 22 100V L588 US 2 C594 33 160V C588 0.015 5 C549 2200pF D568 MTZJ-7.5B R584 18k R588 22 2W R596 0.47 1/4W D596 EGP20G R574 10k 1/10W 6 FFOC 7 13 R570 10k 8 C555 0.0022 SCG2 R598 0.47 1/4W 1.0 Vp-p (H) 15 16 R583 0.47 1/4W C582 0.068 200V DF CN505 1.6 1.6 2.3 1.0 N/C 0.5 1.2 2.0 1.5 4.8 4.8 4.8 4.8 N/C 5.2 0.0 0.0 0.0 0.0 1.4 4.9 4.9 0.0 0.1 0.1 2.4 5.0 5.0 0.1 0.0 5.0 5.0 5.0 0.1 0.0 4.9 4.9 IC002 PIN VOLT 1 GND 2 GND 3 GND 4 GND 5 4.8 6 4.8 7 8 GND 5.0 IC003 PIN VOLT 1 N/C 2 GND 3 GND 4 5.0 5 5.0 IC321 PIN VOLT 1 4.5 2 0.3 3 4.5 4 0.4 5 4.5 6 9.0 7 4.4 8 GND IC400 PIN VOLT 1 4.5 2 4.5 3 4.5 4 4.5 5 N/C 6 N/C 7 N/C 8 4.5 9 4.5 10 4.5 11 4.5 12 4.5 13 4.5 14 4.5 15 0.6 16 3.5 17 3.5 18 4.8 19 4.8 20 GND 21 9 22 4.5 23 3.8 24 3.9 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 3.9 0.6 4.5 4.5 4.5 4.5 4.5 4.5 4.5 N/C N/C N/C 4.5 4.5 4.5 4.5 IC404 PIN VOLT 1 8.3 2 GND 3 19.6 4 8.3 5 19.6 6 3.2 7 0.0 8 0.0 9 3.2 10 9.1 11 9.7 12 3.2 13 3.3 14 8.3 15 GND 16 19.6 17 8.3 IC545 PIN VOLT 1 0.7 2 13.5 3 -12.2 4 -13.3 5 0.2 6 13.8 7 0.7 IC561 PIN VOLT 1 0.1 2 3.4 3 2.3 4 GND 5 9.2 6 10.2 7 0.1 8 13.5 IC565 PIN VOLT 1 3.4 2 3.4 3 2.1 4 9.0 5 1.0 6 1.0 7 1.0 8 1.6 9 1.6 10 1.6 11 GND 12 1.6 13 1.6 14 1.6 IC600 PIN VOLT 1 2.5 2 1.8 3 2.2 4 2.5 5 GND 6 0.0 7 4.0 8 17.2 9 GND 10 10.4 11 0.0 12 4.6 13 N/C 14 163.6 15 153.5 16 157.6 17 N/C 18 340.0 IC603 PIN VOLT I 12.0 G GND O 9.0 IC604 PIN VOLT 1 133.7 2 N/C 3 2.5 4 11.3 5 GND IC608 PIN VOLT I 11.0 O 5.0 G GND IC633 PIN VOLT I 9.0 G GND O 3.3 All voltages are in V. 10 11 L582 5mm A BOARD TRANSISTOR VOLTAGE LIST R581 100k 1/4W TUNING CONTROL Y/C/J A BOARD 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 CN1802 D563 5.0MM R562 10k 1/4W 1.9 Vp-p (V) 196.9 Vp-p (H) 0.7 Vp-p (H) 12 R585 12k R586 2.2k 1 TO: D/GD BOARD 9 D598 EGP20G POWER SUPPLY TUNER/IF DEFLECTION AUDIO C562 220 25V HDY+ 3 L516 FB505 1.1UH D567 1SS133T-77 R526 22k HDY+ 2 8 R546 2.2 C563 0.01 25V B 22 T511 7 R565 10k 1 1 R514 D514 68 GP08DPKG23 3W C516 0.24 R547 10k R564 39k D515 GP08DPKG23 FB506 1.1UH 14 5 R512 7.5MM R515 D506 RU4AM-T3 L525 8mH D525 1SS133T-77 V PULSE 3 CN503 4P C514 0.82 R582 7.5MM D528 1SS133T-77 4 FB404 5MM R513 33 FB522 1.1UH R528 390 SP L+ FB467 5MM JW402 5.0MM C515 2.2 L515 2.2mH R525 47 R561 10k 1/10W SP L- 4 TO-CN2901 V BOARD C513 0.047 R510 1k R850 22k C597 220 25V R533 6.8k * R578 10k 1/4W R567 47k R539 0 SP R- 3 2 L513 10mH C546 0.47 50V R563 10k C542 0.0022 50V B SP R+ 2 2 C508 0.047 IC545 13 STV9379A VOUT C545 220 50V R557 2.2k 1/10W 1 1 SW515 Q522 KTC4370A C521 1 50V C460 16 R568 120 C522 220p 5MM R427 47k T510 R545 470 D526 PG104R 5MM C461 R521 680 1/10W R520 10k 1/10W R534 15k R852 56k IC604 * ERROR AMP FB601 * FB602 * 8 C543 R505 5.5MM 6 C561 4.7 50V R535 5.6k C690 0.01 25V B 12V R591 0.33 R594 1.2k R429 47k R409 0 C525 2200p 500V R575 Q521 4.7 2SC3311A-Q 1/4W RSTA O G 1 R543 0.82 4.7 C571 100 25V R536 10k R614 2.2k 1/10W C600 10 50V C651 * R620 2.2 R544 R851 1k 1/10W D641 1SS133T-77 R671 * R670 * L606 * C650 * R572 4.7k 1/10W C527 22 160V C536 0.0047 18 2 C901 6.8K R680 0 R604 1k 1/10W D047 MTZJ-T-77-5.6B D046 MTZJ-T-77-5.6B SPKR+ 5 3 C505 470p R542 10k R537 680k Q608 2SD2144S-T RELAY DRIVE R634 10 R540 10k R532 5.0MM C534 0.0022 50V B C665 100 25V R403 100 C411 C413 C415 0.33 FB403 5MM Q578 2SD601A-QR SW C507 19000p 4 C544 47 50V FL001 FILTER I T603 * 1 Q504 2SD601A 14 IC001 PIN VOLT 1 N/C 2 GND 3 2.2 4 2.2 5 GND 6 5.0 7 0.0 8 2.0 9 0.3 10 2.1 11 5.0 12 GND 13 3.3 14 3.1 15 1.0 16 1.5 17 3.3 18 0.5 19 1.1 20 GND 21 0.5 22 1.7 23 0.5 24 0.5 25 0.5 26 0.0 27 0.0 28 2.1 29 2.7 30 3.3 31 2.9 32 GND 33 2.8 34 3.3 35 2.9 36 GND 37 1.8 38 0.0 39 0.1 40 2.0 41 1.6 42 3.3 43 N/C R401 100 -2 C581 47000pF C022 10 50V C023 470 16V R573 4.7k 1/10W Q572 2SD601A-QR SW R813 10k 1.14K Vp-p (V) A BOARD IC VOLTAGE LIST C419 R-IN D510 BY228/A52A/ 10 1 R802 8.2k R812 10k 20 JW401 5.0MM T505 Q502 2SC3209LKH-DRIVE C502 330p 50V B Q573 2SB709A-QR SW D050 D1NS4-TA2 2 C504 470p 8 R890 68k R803 13k 19 15 Q505 2SD2645-YB H-OUT 4.7k R901 8.2k C585 220 1 R504 D513 MA111 R801 10k 18 D505 BY228/A52A / 11 12 R815 47k D052 MTZJ-T-775.6B C503 0.047 200V C501 R502 4.7k 1/4W R651 * R659 * H.D D507 1SS133 28.7 Vp-p (H) 50.3 Vp-p (V) 4 R310 1k C595 220 25V Q503 2SB709A 17 C409 0.22 FB501 5MM R408 0 C506 0.001 L004 R814 68k 16 Q411 2SD601A-QR S-TX C015 0.1 16V B C550 15 9 R305 75 C304 0.1 50V JR317 0 14 21 R404 2.2k R503 2.2k R364 75 D236 RD9.1EW Q316 2SD601A-QRS-TX BUFF C021 0.1 16V B 13 C452 Q404 2S601A-QR S-TX Q305 2SB709A-QR BUFFER B+ C305 0.1 Y-IN 12 9V 22 CN515 6P JW305 5MM R411 10k R560 1k 1/10W C306 0.1 U-IN Q303 2SB709A-QR BUFFER R319 220 1/10W D234 RD9.1EW V-IN C100 0.1 50V 25 Y-IN R316 2.2k 1/10W L005 C307 0.1 12 C458 * 1 26 O D645 MTZJ-T-77-5.6B 7 D569 MTZJ-T-775.1C 8 3 6 R421 0 3 27 U-IN C303 0.1 50V C-IN 4 5 5 V-IN R318 2.2k 1/10W EMI R308 1k 11 C403 0.0033 4 4 VZOUT R893 0 5 C401 22000p 2 24 C094 0.01 25V B 29 28 25V 10 C405 0.033 3 3 23 C019 0.1 50V R015 10k 1/10W 2 5 C301 0.1 1 1 22 47 9 JR402 * D508 MA111-TX BOOST 21 C302 0.1 R088 0 L002 FILTER 8 R -2 DRIVE+ L003 FILTER R116 470k 1/10W 7 V2-R R405 10k :CHIP VCC- VD-VRAMP GND-YC 20 0UH R320 2.2k 1/10W R501 330 R410 10k :CHIP OUT R550 1/10W 470 VD+VRAMP EW-C HVCO 19 R007 C096 0.01 25V B C097 47 25VC095 Q304 2SB709A-QR BUFFER R315 220 1/10W REF 31 R-OUT D230 RD9.1EW-T1 R115 470 1/10W 6 OUTA 5 23 LINEA 4 C457 * D405 1SS133T-77 FB502 5MM D401 MTZJ-T77-7.5B 32 R317 220 1/10W L006 11 IC400 * AUDIO PROCESSOR 0.0015 3 :CHIP 8 P-GND EW-OUT IK-AKBIN IO-BDAT ABL-ACLIN IO-SDAT O-SCLK I-SAP I-STEREO O-SAP O-BCLK C115 560p 50V CH C406 IN6B MONB 2 24 7 VC1 18 -2 4.7k 6 VG(L) 33 G-OUT EMI C408 IN4B IN5B 1 25 TONELB 26 TONEHB 27 TONE-LA 28 TONE-HA 29 BBE1B 30 BBE2B 31 SRS/SSFIL1SRSFIL2 32 BBE2A 33 BBE1A 34 MONA 35 IN6A 36 R517 33k -2 14 13 SS 2 Q601 * SW REG OUT HS601 8 R632 * 17 R370 2.2k R326 1/10W 0UH 34 2.4 Vp-p (H) C410 GND Y(S-VIDEO) 6 7 1/4W C116 0.1 16V B IC608 BA05T STBY 5V REG R607 1M 6 AUDIO-VCC 37 -2 C519 0 C436 0.1mF 13 18 17 14 NC C645 * JW624 * JW622 * CN404 * 38 FB402 3 5 39 C462 4 GND 40 C463 12 4 16 R325 0 R372 3.3k 1/10W 35 10 13 IC404 TDA8947J AUDIO AMP 5 3 1 C609 1000 25V 7 C611 470mF C643 * 36 R337 X301 22 1/10W IIC_CLK L011 FILTER 4.7 Vp-p (H) YUV-L R422 10k 11 3 15 C330 0.01 37 B-OUT C337 22p 50V CH 8 1.0 Vp-p (V) 168.8 Vp-p (H) R434 0 LINE B PS401 IC LINK C560 10K R450 -2 10 NC GND LOW-B P 2 14 C091 47 25V C090 0.01 25V B R006 4.7k 1/10W R003 1k 1/10W C008 0.1 50V 13 C012 0.0047 50V B C006 1000 25V D642 MTZJ-T-77-30D R658 * 16 VB 7 +B 12 R005 0UH R004 470 1/10W C007 470p 50V CH 4 C635 * C637 * JW625 * VS TIMER R508 7.5MM JW620 * 1 VG(H) GND 9 — +B RT C634 * C636 * CN602 * CT R631 * TO-CN1601-GD BOARD R630 * 15 1 NC 4 D501 MA111-TX R507 10k 1/10W 11 C011 0.001 50V B C009 220p C010 50V 1 CH 50V R002 0 D603 S1NB60-4062 12 C633 * DGC CONNECTOR Q501 2SC3311A-Q DGC DRIVER F/B R625 * RY501 — VD 2 C523 0.22mF VSENSE 3 2 C620 * 38 Q531 2SD601A IC600 * SW REG CON 5 DGC R629 * R627 * 6 DGC 1 10 D500 MA111-TX 1 TO CN603 A BOARD DGC C003 22p 50V CH C005 0.0022 50V B C004 47p 50V CH T602 * R626 * XTAL-PAL-M IIC_DATA 7 C422 SP L+ Y-IN D628 MA111-TX JW553 * CN501 2P X001 9 Q600 * R601 * R641 * JW552 * L508 5.0mm 8 C648 * S 39 6 R371 220k :CHIP C328 0.01 40 APC XTAL-PAL-N 4 R628 * C621 * 11 D629 MTZJ-T-7712B 7 -2 9 D612 * 10 M DGC LT R499 100k 41 8 R611 * JW606 5.0MM THP501 * 6 C319 10mF JW550 * — JR403 * RT C559 0 C450 2200 25V IC561 NJM2903M-TE2 V HOLD CNTRL D321 MTZJ-T-77-10B C601 * JW551 * 5 C318 10mF 1 TO CN101 A BOARD 4 :CHIP B R324 1k 0.9 Vp-p (H) D202 D207 MTZJ-T-77-9.1B MA11-TX L-IN 1 2 1 EY111 3 2 R660 * C680 1000pF RY600 RELAY O-MAGABASS R338 0 JW605 5.0MM C603 0.22 L O-LED HS600 VDR600 * R602 * 7 I-HSYNC 2 6 7 C605 1000pF 3 4 R652 * IC321 NJM2534M-TE2 VIDEO SW 42 VCC-3.3V 50V — JR209 0 43 5 0.1 C602 0.22 FB616 * R640 * D613 * R699 * R603 * 8 FB617 * C629 * 44 VM-OUT C064 0.047 16V B TV-VID 45 VCC-3.3V 1 R335 220 :CHIP 46 2 C313 T601 LFT R615 * R612 * D605 * LIGHTENING R211 220 JW404 5MM R551 4.7k 2 K R687 * R613 * C613 0.0047 250V F 4 1.2 Vp-p (H) 6 1.0 Vp-p (H) C416 C420 C412 C418 1 C414 4.7 0.0082 R251 1k Q300 2SD601A-Q VM OUT C325 0.0033 50V B 3 D006 MTZJ-T-775.1C R339 220 47 25V C615 0.0047 250V F 48 47 D604 * D606 * F601 * — C317 10 3 3.2 Vp-p (H) 9 * R420 0.0033 R218 220 1 D004 MTZJ-T-7710B 5 2 R311 220 1/10W IC565 NJM2902M-TE2 VERT DRIVE BUFF C056 0.0022 50V B 2 L C099 47 25V C551 1 50V GND-OUT I-PROT 80 1/4W 1 C205 0 D209 MA111-TX C424 C326 O-MONO 78 4 1k 49 C092 — 1 AC IN R250 1k C451 0.47 50V I-MENU R061 10k 1/4W CN600 2P AC IN R415 * R524 6.8k 1/10W B I-KEY 79 R051 AC IN 25 D203 MTZJ-T-77-9.1B R400 4.7k YUV-R C033 0.01 25V B O-AGCMUTE 77 TO-CN1600-GD BOARD J R433 100 :CHIP TV-R GND-DEF I-HLDWN 75 R062 470 1/4W 50 C-IN R072 4.7k 1/4W C553 16V IC001 M65582AMF MICRO/Y-C-J/COMB I-PWR 74 D005 MTZJ-T-7710B 51 Y-IN 1 220 52 VCC-3.3V AC IN R330 75 D317 RD9.1EW C402 2 I-SIRCS NC 2 4 Y (YUV) 220 I-AFT 70 76 R060 | R208 5.0MM R221 220 R312 6.8k 1/10W 4 XTAL-NTSC 69 73 1/4W 53 DCT_FILTER 1k R059 AC IN 3 C554 0.01 25V B R328 0UH O-SEL0 72 1/4W 54 MONITOR-VIDEO-OUT 10k 55 C014 R058 56 VCC-3.3V R110 220 1/4W 57 VSS-DIG I CN601 * D205 HZS9.1NB2 R418 * O-SEL1 68 C057 0.1 16V B R553 1k R028 67 1/4W 58 O-RELAY 71 D003 MTZJ-T-7710B — D204 HZS9.1NB2 C404 C370 4700pF EMI 22k 59 RESET R053 O-HSYNC 66 1/4W 60 VHOLD 7 1k R057 R070 220 1/4W CV-IN R081 47k 1/10W R047 220 1/4W 61 FILT GND 65 R048 4.7k 1/10W 62 O-DGC R063 4.7k 1/10W 5 6 R049 4.7k 1/10W 63 HLF 4 POWER ON — R080 10k 1/10W 3 64 D002 MTZJ-T-775.6B SIRCS TO-CN3001 HR BOARD 2 R037 10k 1/10W R056 10k 1/10W R050 4.7k 1/4W C054 1 50V C049 1 50V R556 Q533 2.2k :CHIP 2SB709A ABL R031 220 1/10W R034 7.5MM EMI OR 2 50V GND STBY 5V R096 4.7k 1/10W R112 4.7k 1/4W 1 Q006 2SD601A-QR HP PROT 0.1 10 MPWR LED R052 220 1/10W C206 4.7 R212 220 R222 220 Q301 2SB709A-QR IK-BUFF JR44 0 — TO-CN1004 HS BOARD 5 C552 R098 33k Q005 2SB709A-QRS-TX SYNC SEP R094 0UH O-MUTE R102 22k 1/10W TIMER LED 6 R527 2.2k 1/10W B R554 3.3k R095 220 R054 22k 1/4W VCC-5V G C079 0.0047 50V B R082 1M 1/10W R035 100 1/10W R055 4.7k 1/10W VSS-MCU STBY 5V C052 220p 50V CH C053 0.047 16V B X-OUT R083 150k 1/10W 24 R209 5.0MM R419 * R033 220 1/4W CN002 * R210 100k V1-R C537 0.001 50V O-VOL 7 X-IN 6 KEY Y1 O-NS MENU C207 4.7 R213 100k D412 0 R407 220 R402 0 R217 220 D208 HZS9.1NB2 R862 220 1/10W I-BINT 5 C213 4.7 R442 100 4 AUDIO R2 D206 PDZ9.1B-115 D232 RD9.1EW-T1 C098 0.01 25V B EMI 3 R227 75 R406 220 C212 4.7 R215 470k R313 0 R352 470k 1/10W STBY_5V H-OUT GND AUDIO L2 7 1 R351 4.7k D351 MTZJ-T-77-3.3B 3.3B FBP-IN 2 V U GND C351 470p 50V CH MAIN-TV-IN GND R216 470k IN5A Q391 2SD601A-QR S-TX C509 10 STBY_5V R086 1k 1/10W — — 4 R093 47k 1/10W VSS CN004 7P F O 3 VM R555 10k 1/10W R084 680 1/10W | V L C400 0.33 IC002 IC BR24L16F-WE2 MEMORY R394 10k 1/10W R393 2.2k 1/10W 1 50V 1 TO-CN1002 HU BOARD N 5 R 8 9 Q002 2SD601A-QR CONVERGENCE 8 R391 4.7k 1/10W R392 560 1/10W D390 MA111-TX R040 4.7k 1/10W TV-VID VIDEO2 OR H CH -2 TO-CN1005 HS BOARD J205 * R R042 220 1/10W R043 220 1/10W C041 10 50V 3 7 C047 50V D559 MA111-TX Q390 2SD601A-QR S-TX C390 0.01 25V B R041 4.7k 1/10W 4 6 23 C470 470 R478 10k R230 75 :CHIP 5 AVCC PGND 470p Q004 2SD601A BUFFER R085 0 Q401 2SD601A-Q JR216 * D231 RD9.1EW D414 MTZJ-7.5 Q412 2SD601A-Q R L C204 0 R229 75 6 5 J200 C202 0.47mF 7 4 HP | J202 3P R477 680 R479 1k L007 GND STBY-7.5V R039 330 1/10W R314 10k 1/10W R390 0 :CHIP SYSTEM_CRYSTALS 3 R038 1k 1/10W D589 1SS133T-77 9V R027 47k D558 MA111-TX AFC1 2 22 D201 MTZJ-T-77-9.1B R044 4.7k 1/10W V-RAMPC 1 R076 100 1/4W R045 4.7k 1/10W VCC-3.3V SLC SDA R091 47k 1/10W Q008 2SD601A-QR BUFFER JR315 0 C051 10 50V | IN2B 5 C048 100 25V R092 2.2k 1/10W R090 22k 1/10W R030 220 R087 100 1/4W CN403 * Q400 2SD601A-Q IN3A LINE A 21 IN4A D650 MTZJ-T-775.6C Q650 KSC2383-O 5V REG LINE B C081 0.33 10V B R321 100 1/4W R323 560 AUDIO OUT VAR/FIX D200 MTZJ-T-77-9.1B VIDEO2-IN 4 JR401 0 R203 100k C203 0.47mF VRB 3 L Y U D235 RD9.1EW VRT GND C660 47 25V R650 680 1/4W V L C431 4.7 D431 HZS9.1NB2 VIDEO1-IN 2 C661 100 25V LT | V2-L E — LT R TO-CN2401 KBOARD 5V 1 +5V 20 TV-L — RT RT D C080 0.33 10V B Q306 2SB709A-QR BUFFER R322 470 | IN1B R105 0 TP603 19 R103 10k 1/10W TV-VID R220 220 | D237 RD9.1EW R202 100k C220 0.47mF 9V +9V R FB302 5MM — 5V C430 4.7 D430 HZS9.1NB2 VIDEO 1 TV-R L010 18 IN3B Q009 2SD601A-QR AGC | IN2A TP602 L009 17 IN1A L008 TP102 C077 47 25V R431 100k 5V C C076 100 25V R430 100k R029 220 R032 220 | 5 V-IN R101 4.7k C075 470 16V 16 VIDEO3/VIDEO4 TV-L R200 220 | 2.1 Vp-p (H) U-IN C200 0.47mF 15 2 1 R111 4.7k | DAT R107 0UH C673 14 J203 5P R109 4.7k R608 15k 3W | CLK C074 10 50V CN402 * 13 Y-IN R108 0UH L101 TO-CN2402 KBOARD | CN201 7P V GND GND 6 7 B G N/S 4 3 5 9V LINE IK 2 B-CLK 4 1 GND B-INT B-DAT 3 FB301 1.1UH RF-AGC — 12 R R OUT L OUT MUTE NC MODE F MONO NC SAP IND DET OUT2 DET OUT ST IND TU101 BTF-WA421 GND 9V AFT OUT RF AGC VIF SDA AS 5V SCL 6.3V B 9V D007 | S-VID STEREO TP100 30V FOR JIG 2 — 1 CN301 9P 11 CN200 7P TO-CN2752 CWBOARD CN003 4P | L | GND A 9 2 | 1 8 Y(S-VIDEO) | GND 7 6 | 7 6 GND | U 5 Y (YUV) | 3 4 5 | 4 3 V | GND 2 1 | 2 1 A BOARD WAVEFORMS MTS -2 9-965-960-01<BA6S>A Q002 Q004 Q005 Q006 Q008 Q009 Q300 Q301 Q303 Q304 Q305 Q306 Q316 Q390 Q391 Q400 Q401 Q404 B 0.0 3.8 5.1 0.0 0.0 0.0 1.8 3.6 3.6 3.6 3.6 5.5 0.0 0.8 0.6 0.0 0.0 0.0 C 2.0 9.0 0.8 0.0 2.6 5.2 9.0 2.1 GND GND GND GND 3.3 1.5 3.3 0.1 0.1 0.0 E GND 4.4 5.0 GND GND GND 2.4 3.6 2.8 2.9 3.0 4.9 0.0 1.9 1.5 GND GND GND Q411 Q412 Q501 Q502 Q503 Q504 Q505 Q521 Q522 Q531 Q533 Q572 Q573 Q578 Q590 Q604 Q608 Q650 B 0.0 0.1 0.0 0.0 2.9 0.0 0.0 0.0 0.1 0.0 1.5 0.0 2.6 0.0 133.7 30.6 0.0 5.8 C 5.8 0.1 14.3 74.1 0.0 0.0 131.8 3.8 -2.1 0.0 GND 2.6 0.0 0.5 0.0 11.6 6.7 9.0 E GND GND GND GND 9.0 GND 0.0 GND 0.0 GND 1.5 GND 2.6 GND 134.2 30.2 GND 5.0 Q600 Q601 D 313.0 155.0 G 160.0 4.9 S 156.0 0.0 All voltages are in V. KV-27FA310/27FS120/29FA310/29FS120 38 KV-27FA310/27FS120/29FA310/29FS120 A [TUNING CONTROL, Y/C/J, POWER SUPPLY, TUNER/IF, DEFLECTION, AUDIO, MTS] [TUNING CONTROL, Y/C/J, POWER SUPPLY, TUNER/IF, DEFLECTION, AUDIO, MTS] CONDUCTOR SIDE GLUE 1 ARK M L101 C101 R339 C309 R101 8 D321 5 D201 D231 R203 R416 J R401 R213 R330 R210 R402 J203 R430 C431 CN402 C416 C414 D431 D205 C206 R433 1 C430 CN201 R215 D430 C207 C212 5 ) Y( YW GND S- I N GND U GND V R233 R306 R307 Q401 C213 D235 C543 R578 D508 R217 H. PROT R216 TP33 R899 C562 JR216 Q521 B 1 4 8 R521 C571 R520 5 D545 R575 E IIC561 R561 C544 R562 R529 C566 C546 C561 R564 R565 C535 D504 D502 C534 D528 D503 R531 D566 C529 J205 R528 TP30 R566 R546 R431 D208 R579 HS522 Q522 C525 R234 C202 R202 J202 JR215 7 Q400 1 R606 D237 R406 D563 E B C526 R544 9 R607 Q604 R229 JR403 R218 D206 R419 R418 IC400 D526 C501 C612 D628 00 CN6 L52 5 R227 JR402 JR214 JR312 JR207 R407 C536 R537 R552 R538 C530 R532 L371 R221 R336 R335 D317 R340 C413 C521 FB522 C651 D620 14 IIC565 R571 R557 C522 R508 8 R852 R530 HS603 R536 C203 D200 R222 D525 Q578 R522 R540 R802 IIC603 R539 R563 R096 D501 C563 C524 C541 O R680 O C609 C318 C417 1 7 J R12 L370 R804 C412 R434 C539 R534 R533 C540 R535 C542 D538 R511 D204 R212 R211 C424 C420 C422 CN503 R609 C690 C401 C403 1 JR313 D390 C638 Q006 C390 D641 D644 C570 L609 Q572 Q573 R039 R038 R316 D558 R559 R318 R580 R558 C251 C600 R604 C302 JR301 R374 CN704 R415 R420 C406 C408 C410 4 2. 7A ( FV) J R201 TP08 R442 40 IC401 FB502 21 C418 C450 TP24 R208 C372 R375 C319 D232 J R314 1 C404 R250 R427 R450 Q390 R390 R599 R364 R302 R392 R391 1 J R110 1 C402 R400 2. 0A ( FS) J R310 C317 4 C419 C400 C452 D401 R409 D559 R027 1 IIC321 R209 R429 PS401 Q860 R519 Q519 Q301 Q300 C307 D234 1 12 65 R107 80 C051 Q412 C470 R084 Q004 D414 C075 R100 TP13 R048 1 C471 D007 TP14 6 R338 C405 20 FB501 I C409 R403 JR411 R251 J R311 C520 R851 PROCESSOR C407 C457 AUDI O R404 R411 R394 R412 R410 HS404 CN403 C458 C411 R408 Q404 R405 FB301 D567 C597 R584 R850 R567 C663 R608 D596 C901 L582 R585 C595 R541 R901 C548 1 R543 R545 R596 C589 R597 C555 CN586 C516 6 8 C517 L588 D514 R588 D515 1 L608 TP27 ABL TP20 H- OUT H- OUT E HDYFB505 4 6 N/ C VDY- TP28 HDY- 06 D5 D505 D510 C506 C507 C IIC604 HDY+ CN515 CN505 HDY+ R581 CN506 TP29 C510 R667 C652 1 +13V 1 R673 D624 4 FB602 C670 FB604 T585 Q506 B Q505 C594 C618 C640 GLUE FB506 R668 C617 HS601 FB601 FB603 S R651 C051 CN6 01 C648 C654 C655 R611 R652 1 CN585 R515 135V TP21 H- OUT C610 D611 HEATER VDY+ R506 TP23 R622 R623 D414 CN602 C672 C649 D612 G GND TP19 GND T505 R505 D614 R670 S IC545 R586 R549 R820 T510 R595 D609 D602 HS615 R671 D613 R612 C643 D610 R598 JR586 200V HDT 4 6 D615 R659 C621 C470 T504 C624 D618 R660 Q600 C508 E Q601 EY110 C503 2 C647 FB616 HS600 R591 TP31 R616 R658 R640 D617 D598 - 13V D601 C628 C582 3 D621 R617 18 R582 C549 R587 R512 Q590 CN404 3 1 D630 B R594 R647 C642 C633 R632 A VCC 1 PH602 R619 C637 C645 R630 IIC600 4 FB606 R631 C590 D569 C673 JR585 - 15V R504 C504 R593 C650 A VCC A GND A GND CN101 C636 R503 R569 R526 C558 VD+ +15V C505 R570 R583 D587 HEATER R514 JR128 R620 FB605 C667 R625 D631 9 C635 R696 R613 R687 R628 D004 JW414 JW415 I C502 R502 L606 L508 C619 C614 C631 C634 C627 FB617 BA6- S 1- 862- 185- 12 B+ 200V NC E R592 D607 R615 S006 M C514 TP25 TP24 10 S002 J R513 Q502 R590 C550 C451 D608 R890 C523 R892 L607 TP26 L513 E 1 R627 L515 D589 R589 R618 T602 R065 C471 L511 D513 R893 C603 D562 D500 R574 1 C547 R542 C513 D568 V. OUT R902 7 C585 C615 R621 R626 C620 C515 L510 Q531 C528 R812 Q504 C902 R547 T511 Q503 JR504 R814 R801 C581 R813 R568 2 R548 L516 D507 R815 C616 1 R525 C545 L527 C611 R601 THP501 7 6 C527 R510 C512 R803 4 + R602 JW205 E R479 R478 R085 C076 C661 Q009 R049 TU101 C415 1 R401 2 C625 D604 C613 D605 D231 D201 C075 B R477 Q005 TP15 L008 E R102 TP11 TP10 15 D046 Q411 Q391 C351 R351 D351 R314 R327 R311 C048 R308 R301 C602 00 R6 VD CN102 402 JW R080 C052 R082 R086 R108 R040 TP12 L009 D047 D405 Q533 R556 C553 C554 R527 C538 R863 R312 C560 R315 R317 C099 L007 L011 C097 R382 C021 C303 C019 V GND U GND Y(YUV) GND Y(S) R056 R572 B C660 R650 C071 L010 C436 R055 R553 C096 C326 X301 C095 D250 C116 C014 R381 R380 24 C015 R325 L003 R326 C330 R005 C091 CN001 C033 C098 C328 C012 R006 R115 C509 Q002 C568 17 R501 Q501 D650 R321 R105 C312 R322 C045 R200 E R507 GND 1 R560 R573 B C077 R032 C043 C421 D420 C559 R576 R093 R045 R044 JR2 R028 R524 C551 JR303 C041 1 C115 C270 C011 C023 R092 R634 Q650 JR300 C081 C080 R103 JR485 R417 Q420 D402 JR255 C370 JR102 C552 41 X001 R003 C007 C010 JR6 C008 R362 JR44 C325 R372 C004 R371 R337 R070 R551 C371 64 C003 R088 C005 R063 C044 Q403 R499 C050 C499 C056 C057 R087 JR484 R051 R053 C059 R058 C058 R057 R060 C054 C061 JR213 C065 D002 11 C079 R106 D432 CN301 R041 C074 21 D232 470 JW L R518 R554 R860 R393 R577 C518 R861 RY501 G C076 K JR317 C064 R061 R059 C046 R062 L002 C067 R090 D606 C605 R067 JW418 JW96 JW63 JW416 JW67 Q650 R650 J R104 16 R422 RY600 C629 403 JW 92 JW L008 D509 CN501 J 200 55 JW 25 R220 R421 C423 R862 1 CN703 D413 D412 R230 C537 9 LI GHTENI NG JW 90 B DGC R629 R221 D317 C319 JW180 S003 L009 D650 R087 SIGNAL GND CLP001 R323 172 JW C661 R509 C632 R112 R069 EY200 93 JW 13 GND PWR ON SIR STBY GND MPWR TMR R071 SGN GND JW20 JW171 JW120 JW61 I C074 C660 1 JW127 JW60 CN003 CN702 R321 JW 68 1 GND B-INT B-DAT B-CLK JW57 JW56 JW13 I O 1 CN401 H JW62 JW53 DATA CLOCK JW51 JW47 JW50 JW52 JW46 JW99 JW451 JW151 R051 R053 C054 12 D203 D202 G R029 R030 4 JR1502 S007 D003 JW97 D205 JW410 JW457 JW87 C318 JW72 JW173 JW07 R058 JW22 R057 R060 R061 JW17 JW461 JW433 R059 7 R062 X001 D402 JW23 D002 L002 R072 FB462 FB467 CN004 4 F EY103 260 JW R363 5V LI NE C200 D603 H EY203 EY101 R047 GND D640 C460 S008 IC004 B J205 C207 7 JW455 1 EY202 D044 C077 R015 IC608 FB403 FB404 C304 E Q521 1 CN201 JW408 D430 CN402 S004 D204 EY100 12 C556 2 D200 43 JW R054 C009 1 J201 HS545 R562 C562 C416 JW454 5 EY206 R212 D007 R305 CN200 HS605 - D237 1 6 11 15 21 31 1 27 C220 R603 R211 S- I N 102 JW 3 S005 EY207 GND D321 J R212 R323 Q306 R109 IIC404 R699 J 202 EY201 JW95 JW94 JW85 TU101 450 JW 39 JW EY105 C006 FB462 R206 J401 D567 EY570 R584 R585 C543 R578 C417 JW452 JW82 D047 426 JW C306 R313 T601 R078 C066 EY204 J 203 ) Y( YW R423 R424 R425 R352 Q304 J R315 1 R029 R414 1 EY205 G R222 Q302 R310 R320 R309 R050 C206 423 JW Q305 J R209 CN702 7 C564 4 Q303 C308 L006 7 JW581 JW580 EY661 R850 R567 C595 C597 C566 JW511 C521 R522 JW419 JW409 406 JW EY102 D045 EY660 EY568 C545 C546 FB522 JW540 R540 C422 JW115 JW407 C423 JW49 C421 R070 R028 C551 JW83 R362 JW29 JW442 D405 JW152 C041 C552 17 R303 IiC002 CLP001 R111 31 C680 4 CN102 EY210 GND C317 C100 D236 C6 01 TP34 D431 U 11 R523 1 J R302 C301 C567 C519 R500 C500 R516 5 R641 147 JW J L1 L005 R319 S001 GND 20- FB609 JW R370 C092 L004 R517 D006 C557 J R306 R614 R079 EY209 C431 C413 25 D044 R605 EY208 V C212 R007 C094 R095 8 F601 1 JW 411 3. 3V J R211 C213 453 JW R094 C047 R037 40 C305 R575 D208 1 7 D304 R030 D045 Q421 R555 7 D235 C414 JW 443 TU VI F SI F MTS R608 D596 JW138 JW137 JW506 1 JW527 HS522 Q522 C522 JW106 JW560 9V 9V FBT V PULSE JW1501 C415 1 R217 CN704 1 431 JW EY528 1 CN585 EY547 EY548 R545 C525 JW521 D526 C526 R544 JW77 78 JW D046 EY104 R596 6 CN586 R543 C516 R515 T510 EY538 JW520 EY539 EY566 JW282 C450 C452 D401 JW41 GND B-INT B-DAT B-CLK D351 JW37 JW38 EY214 16 FB467 CN004 8 EY549 L515 JW529 JW528 EY546 JW522 C503 C502 JW525 JW103 JW509 R450 JW425 C048 9V LINE IK EY213 CN403 2 R072 CN005 R207 C588 R502 B L527 JW512 448 JW R443 C440 D001 D566 C430 446 JW 445 JW SIGNAL 4 7 D209 R588 D514 C508 T505 EY665 L511 D525 R328 R550 R031 R324 E R440 R568 C571 F D528 10 D569 EY211 444 JW D006 R110 E D207 D515 EY592 EY593 T504 EY591 EY590 R591 E JW421 C412 JW 449 C399 C337 CLOCK C042 R034 R043 R493 D629 CN002 D568 101 JW C418 CLP002 C441 149 JW C544 R566 C049 D051 JW 148 EY560 R209 JW 400 C509 1 R581 EY508 FB506 B C561 R571 429 JW 428 JW D509 CN505 D505 EY509 EY510 EY573 JW630 E D538 JW113 JW515 D644 JW27 FB501 EY215 C499 C463 D C507 D510 C510 EY574 1 R594 JW603 D641 JW30 SGN N/S B G GND GND R VM JW25 L011 L005 1 AUDIO R2 AUDIO L2 C046 2 D504 C535 R036 J R43 R091 C673 E R047 R042 IIC633 Q008 R035 IIC001 Q608 D630 J L2 9 DATA R054 R569 D563 C420 2. 0A ( FS) I C404 1 R546 1 447 JW 456 JW JW 254 R034 D005 C 4 R208 PS401 IC545 6 501 JW C520 76 JW EY571 D545 54 JW C049 CN701 C462 B D250 L004 JW436 JW662 1 VIDEO2 CN005 JW439 1 C313 25 L5 CN503 FB502 E 80 JW 392 JW 1 CN001 1- 862- 185- 12 FB402 FB401 4 BA6- S C006 438 JW 404 JW C564 C099 X301 C008 D052 R033 109 JW 40 JW C023 D050 34 JW 305 JW FB301 2. 7A ( FV) 432 JW C010 C527 HS404 D304 GND 12 JW 1 C091 C623 C022 16 JW JW15 I 70 JW EY611 33 JW EY216 L003 JW14 JW10 I C608 11 JW JW437 JW640 C665 5V STBY D640 FB403 FB404 C304 O JW283 D642 C097 C095 C461 R075 C301 21 JW D234 3. 3V CN301 9 D236 C092 C014 31 JW 1 434 JW C100 FL001 JW19 R639 D645 S008 C019 C303 1 JW JW302 MENU/SEL 252 JW 304 JW I C633 R076 CN703 C302 GND 608 JW JW 902 160 JW R511 IIC603 R634 JW 140 C663 8 R110 R052 I CRO + Y/ C + COMB M R441 L582 JW 136 R525 508 JW R609 R583 D R639 R077 R074 532 JW R542 C547 0 EY67 R804 EY610 533 JW C582 R547 B 114 JW L609 C549 L516 C511 +B 200V NC HEATER VD+ E +15V - 15V C555 R582 EY535 L510 R510 R532 R501 C638 C558 D432 1 7 JW435 JW5 R073 V GND U GND CLP002 Y(YW) GND S-IN R077 C460 C067 S007 JW24 JW303 D051 O HS603 JW117 JW32 B JW116 E COLD JW621 JW251 Q608 UP/DOWN 2 JW B E C600 D203 D202 CN506 4 R595 EY605 EY606 L608 D614 Q590 C550 C441 HOT R074 C512 111 JW 128 JW FL001 R076 R073 EY563 D587 EY536 8 EY66 C651 I D598 7 CN003 R002 D642 C461 C062 3 R116 C665 JW 502 R598 J L3 EY562 C589 7 C501 R508 Q501 R587 526 JW D620 RY501 CN200 A JW124 EY2 C R081 C060 J R7 C090 TP02 C517 T511 JW 519 RY600 8 JW EY540 EY537 C609 D629 6 JW EY545 JW 159 C612 EY1 R441 L+ 158 JW EY527 EY530 C515 6. 3A EY689 401 JW GND C611 EY95 EY96 EY111 EY532 EY567 C513 1 I Q316 EY520 EY515 EY516 EY529 JW 510 CN60 0 VDR600 201 JW 01 C6 LIGHTENING 1 424 JW RR+ R590 EY59 EY604 GND SIRCS STBY 5V TIMER LED MPWR LED EY98 C680 F601 EY517 EY514 EY582 EY671 EY672 507 JW C581 R226 IIC003 TP01 L588 JW 135 EY543 D507 D230 EY518 O D645 EY531 JW 134 EY542 C528 C623 R512 EY666 EY667 R004 D052 R304 EY513 C514 R513 EY541 RI SK OF FI RE REPLACE FUSE AS M ARKED EY85 EY603 530 JW C585 D608 C313 D050 EY583 EY97 JW 639 EY600 C602 L- L606 C451 L607 IC004 7 R033 C204 R075 EY581 J L4 R589 D562 T602 EY512 515 SW D589 C625 CN701 1 C205 EY613 D005 TP32 C022 EY77 EY640 4 EY88 1 CN002 ENU M KEY FB606 R620 FB605 C667 EY551 EY550 JW618 C523 641 JW FB402 R504 C505 Q502 JW 133 L513 EY212 EY602 C603 4 F I JW 144 JW 553 JW617 2 C504 C462 J R305 J R304 JW 504 C632 C440 D230 EY525 JW 552 JW 550 RLL+ B 6 C053 R083 A R505 JW 145 EY87 E J 201 C650 R601 R112 T601 THP501 5 FB401 R506 R514 C615 551 JW EY526 EY524 R503 4 CN401 EY521 Q506 R618 D001 PRESS GUI DE R593 3 R+ EY580 EY664 C590 R592 C616 R641 202 JW 1 EY78 EY60 D604 R050 POWER LFT EY601 J401 C617 HS615 CN101 R613 JW613 C613 D606 D003 HS605 EY47 R440 4 B EY500 9 EY99 FBT EY519 C624 EY106 C619 EY40 7 D615 143 JW PH602 2 C463 EY511 Q505 1 R625 C631 1 CN515 E D621 C634 13 C214 D601 CN404 T585 C594 EY552 R699 3 JW FB601 FB603 JW624 C642 R619 4 EY86 J 132 JW 2 EY612 + EY48 C066 H 3 D631 C635 FB505 D602 EY12 631 JW L508 EY 56 4 EY501 EY502 EY65 622 JW EY683 C633 JW614 R687 EY46 - 3 G JW623 CN602 R671 JW635 EY609 JW616 JW615 JW606 JW605 EY41 R071 R603 R658 R640 EY54 R630 C614 R602 R069 CH+ 601 JW 9 1 C506 EY11 1 C605 S005 10 R627 EY53 EY45 EY44 IC600 18 CN501 D605 EY43 D618 C647 135V EY 56 5 1 6 R612 R628 JW131 JW130 R067 CH- EY42 EY682 12 PRESS GUI DE C EY62 11 EY507 D5 06 EY 56 9 R668 EY675 EY680 C610 EY82 R659 R629 EY642 S EY68 142 GND J W GND N. C. C640 JW 610 EY641 G FB616 EY50 FB602 D611 FB617 R065 VOL+ S004 GND 4 1 EY63 EY681 627 JW R615 JW 626 POW ER ON IC604 C618 EY61 C649 EY69 C629 5 EY644 D624 EY79 C672 Q601 HS601 G D613 D612 C621 EY81 EY674 S EY64 01 CN6 R611 D004 VOL- EY608 EY49 S001 C654 JW612 JW619 TV/VIDEO EY51 EY52 S002 D FB604 EY80 EY673 6 HORI ZONTAL DEF. EY643 JW 620 T603 10 141 JW C643 C 9 JW 625 S006 S003 8 C648 R652 7 7 EY66 A B C655 JW636 JW637 Q600 HS600 6 R651 918- A EY607 8 5 I 4 EY67 A- 1410- 3 R439 2 R098 1 J R486 COMPONENT SIDE C070 A MARK A BOARD LOCATOR LIST CONDUCTOR SIDE DIODE D002 B3 D003 G1 D004 I1 D005 A3 D006 B6 D007 B11 D045 B7 D046 B9 D047 B9 D050 B2 D051 D4 D052 B2 D200 C12 D201 B13 D202 A1 D203 A1 D204 B12 D205 C12 D206 C11 D207 A11 D208 D12 D209 A1 KV-27FA310/27FS120/29FA310/29FS120 D230 D231 D232 D234 D235 D236 D237 D317 D321 D351 D390 D401 D405 D412 D414 D420 D430 D431 D432 D500 D501 D505 D506 C1 B13 B13 D5 D12 D5 C12 B11 B11 C6 D8 C8 B7 A13 A13 B6 D11 D12 D9 G7 E6 I10 I9 D507 F8 D508 D11 D510 I10 D513 F7 D514 H10 D515 H10 D525 D11 D526 E10 DIODE D528 E12 D545 E11 D558 D6 D559 C7 D562 F8 D563 D11 D566 E12 D567 F12 D568 F13 D569 F13 D587 G11 D589 F8 D596 G12 D598 G12 D603 D604 D605 D606 D611 D612 D613 D614 D615 D618 D620 D621 D624 D628 D629 D631 D641 D642 D644 D645 D650 IC IC001 F7 G3 G3 G3 J8 I2 I4 I8 I7 I5 E6 H7 J8 E5 E5 H6 D7 C2 D7 C2 B10 B4 IC002 C5 IC003 B3 IC321 B11 IC400 C10 IC401 C10 IC404 B8 IC545 F11 IC561 E12 IC565 E9 IC600 H5 IC603 D7 IC604 I9 IC608 B2 IC633 C3 TRANSISTORS Q002 B6 Q004 A12 Q005 A12 Q006 D7 Q008 D3 Q009 B11 Q300 D5 Q301 C6 Q303 Q304 Q305 Q306 Q316 Q390 Q391 Q400 Q401 Q403 Q404 Q411 Q412 Q420 Q421 Q501 Q502 Q503 Q504 Q505 Q506 Q519 Q521 C5 D6 C6 B9 C3 D7 C7 C11 D11 A7 C8 C7 A13 B7 B6 E6 G8 F7 F8 I9 Q522 Q531 Q533 Q572 Q573 Q578 Q590 Q600 Q601 Q604 Q608 Q650 Q860 E10 F7 C7 D7 D6 D11 H8 I4 I5 E8 D5 A10 C7 I10 C7 E12 39 KV-27FA310/27FS120/29FA310/29FS120 CW BOARD SCHEMATIC DIAGRAM 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | A KG KB G2 CRT — 27V: TIGER CN2753 G2 R2760 100 G2 H 1 TO A BOARD C2752 0.0047 2kV E T585(FBT) B CV +9V R3765 2.2k 1/16W L3710 C3781 82p :CHIP D3783 MA111-TX E R3780 4.7k 1/10W B 8 E 7 E 6 G 5 B 4 N/S 3 IK 2 9V 1 C3780 82p :CHIP R3787 5.6k 1/10W R3788 1k 1/10W 5 6 7 B OUT VDD R OUT GND 4 8 B R2766 100 1/4W R2757 1k 1/2W C2753 0.1 250V R 4 D3907 R3919 47 MA111-TX D3908 MA111-TX C3914 0.047 50V R3923 47 1/4W Q3906 2SC2412K-T-146-Q BUFFER D3906 MA111-TX C3931 470mF R3917 4.7k R2764 100 G 1/4W R2763 100 1/4W 1.0V p-p (H) C3930 470mF R3918 47 R3922 22 1/4W R3916 0 D2754 1SS83TD +9V R3933 0 Q3904 2SD601A-QR AMP R3913 56 C3911 100 25V 117.0V p-p (H) R3911 180 JR3910 0 FB3700 1.1UH JW3791 10MM FB3701 1.1UH N/S 1 R3719 220 2W 3 2 C3908 470 16V 3 L3901 C2775 470 16V R2789 4.7k C2755 4.7mF +9V C2774 1 25V R3701 10k :CHIP C2777 4.7 50V 3 Q2772 2SD601A-QRS-TX VERT DEFL 1 C2778 47 R3702 220 :CHIP 1 2 3 4 5 Q3711 2SD601A-QRS-TX — R3711 1k R3713 1.8k R3710 1k Q3712 2SD601A-QRS-TX R3714 1k R3704 1.5k R2788 2.2k RV2701 R3705 10k :CHIP C3702 0.1 — KV-27FA310/27FS120/29FA310/29FS120 - COIL + COIL R3931 2.2k Q3901 KTC4370A VM.DRIVE.2 C3906 0.001 50V CN2707 3P R3902 2.2 R3905 2.2k D3902 MTZJ-T-7739 N/S D3901 MTZJ-T-7739 C3904 0.001 50V C3903 470 16V R3901 100 C3901 2.2 160V CN3903 3P R3930 0 R3904 18k 1/4W 3 E 2 NC 1 VM R3903 560 1/4W C3902 0.01mF R3706 1 C3703 47 25V R3707 1.5 C3701 47 25V R.G.B. DRIVE CRT DRIVE VELOCITY MODULATION Q3710 2SB709A-QRS-TX I COIL R3910 470 3W C3910 0.1 200V R3906 18k 1/4W C3905 0.01mF TO A BOARD R3712 820 R3907 2.2 R3938 0 FB3703 1.1UH AMP R2784 10MM CN585 R3909 100 Q3902 KTA1659A VM.DRIVE.1 R3908 560 1/4W LA6500-FA A/S 2 R3936 5MM C3907 33 160V IC3701 LA6500-FA C3708 0.1 N/S 120.3V p-p (H) 2 FB3702 1.1UH C3909 0.1mF 6 5 Q3908 2SB709A-QRS-TX Q3903 2SD601A-QR AMP R3912 150 R3700 22k :CHIP 145.3V p-p (H) Q3905 2SB709A-QR BUFFER R3915 4.7k D3903 1SS133T-77 C3913 100mF R3921 10k 1/10W D2755 1SS83TD D2756 1SS83TD R2768 100 1/4W R R2756 1k 1/2W Q3907 2SC2412K D3905 D1NS4-TR 9 R2765 100 1/4W 1.2V p-p (H) 4 3 R3932 1.5k R3935 100 R3914 820 CN2751 8P H R3786 3.3k 1/10W D3782 MA111-TX 3 1.3V p-p (H) +9V R2785 33 6 VD+ -15 V Q3783 2SD601A-QR BUFFER R3785 2.2k 1/16W 2 B L2751 C2751 10mF 7 5 +15 V Q3782 2SD601A-QR S-TX 8 HEATER E G 1 9 B+ +9V 1 D2701 RD9.1EW-T1 R2758 1k 1/2W 6 C3915 0.01 25V B C3912 470 16V R R NC — R3779 1k :CHIP R3778 1k 1/10W L3711 Q3781 2SD601A-QR S-TX R3784 270 1/16W R3777 5.6k 1/10W D3772 MA111-TX 5 4 C2754 0.001 50V B L3712 VM 200V R3776 3.3k 1/10W R3783 15k 1/10W G CN301 G R3782 1k 1/16W CN2752 9P TO A BOARD — Q3773 2SD601A-QR BUFFER G OUT Q3771 2SD601A-QR S-TX — F D2758 IC2751 TDA6108JF/ N1B R3775 2.2k 1/16W KB R2770 560k 1/2W R3773 15k 1/10W R3771 1k :CHIP 2 H2 G1-2 10 11 +9V B IN R3774 270 1/16W 9 12 1 H1 KG G IN R3770 4.7k 1/10W 13 KR R3768 1k 1/10W R IN D 7 8 1/4W D3773 MA111-TX 1 G1-3 R3767 5.6k 1/10W CW BOARD WAVEFORMS G1-1 6 CV D3762 MA111-TX Q3772 2SD601A-QR S-TX R3772 1k 1/16W HV 5 RV2750 110M R3766 3.3k 1/10W — G4 G2 3 IK R3769 1k :CHIP G4 100 R3764 270 1/16W C3782 82p :CHIP — R2762 3.3 2W Q3763 2SD601A-QR BUFFER R3760 4.7k 1/10W C R3763 15k 1/10W R3762 1k 1/16W D3763 MA111-TX CN2755 0P J2751 Q3762 2SD601A-QR BUFFER R2767 — G1 E 1 Q3761 2SD601A-QR BUFFER KR R2761 3.3 B+ 9-965-960-01<BA6S>CW 40 KV-27FA310/27FS120/29FA310/29FS120 D BOARD SCHEMATIC DIAGRAM (ALL EXCEPT KV-27FA310/29FA310) CW BOARD IC VOLTAGE LIST 1 IC3701 PIN VOLT 1 0.3 2 0.3 3 -15.0 4 0.5 5 15.0 IC2751 PIN VOLT 1 2.0 2 2.0 3 2.4 4 GND 5 3.7 6 200.0 7 136.0 8 142.0 9 140.0 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 A CN506 TO A BOARD — B 135V 1 NC 2 GND 3 GND 4 — 4 R1853 JW 5.0MM (FOR DF) R1851 6.8k R1852 6.8k CN1800 4P TO A BOARD DF C 1 C1820 0.47 160V 3 2 6 1 C1818 1000pF C1819 220pF T1801 CN1802 0P R1849 10k R1848 2.2k 2W R1850 10k — C1816 220p 500V B CN1801 3P TO:V BOARD C1817 0.0039 630V D All voltages are in V. CN2903 L1805 10mH GND01 1 — CW BOARD TRANSISTOR VOLTAGE LIST Q2772 Q3710 Q3711 Q3712 Q3761 Q3762 Q3763 Q3771 Q3772 Q3773 B 1.5 1.8 5.0 0.0 2.2 3.1 2.0 2.2 3.2 2.0 C 7.1 0.0 5.6 0.0 3.8 9.0 9.0 3.8 9.0 9.0 | E 0.9 2.5 4.4 0.0 2.9 3.8 2.6 2.9 3.8 2.6 Q3781 Q3782 Q3783 Q3901 Q3902 Q3903 Q3904 Q3905 Q3906 Q3907 Q3908 B 2.2 3.3 2.1 0.9 134.0 1.8 1.8 5.7 5.7 5.3 4.9 C 3.9 9.0 9.0 67.0 67.0 5.4 9.0 GND 9.0 9.1 0.0 E 2.9 3.9 2.7 0.4 134.0 2.4 2.4 5.4 6.1 5.9 5.3 E — R1847 100k 1/4W R1846 100k 1/4W C1815 0.022 630V 59.7 D1812 1N4937/23 D1810 ERA38-06TP 1 D1811 ERA38-06TP 1 Q1810 2SC3840K DF-DRV 0.0 DF-DRV 2 GND 3 GND R1844 JW 10.0MM D1809 MTZJ-T-7715B R1845 100k 1/4W DEFLECTION F 9-965-960-01<BA6S>D — All voltages are in V. KV-27FA310/27FS120/29FA310/29FS120 41 KV-27FA310/27FS120/29FA310/29FS120 HS BOARD SCHEMATIC DIAGRAM (ALL EXCEPT KV-27FA310/29FA310) | 3 | 4 | 5 FRONT VIDEO2 TO A BOARD 1 | 2 | 3 | 4 | 5 | 6 | 7 A D1233 RD9.1EW-T1 GND01 L 4 U S1008 4 Q.P.+ VM 6 VM 7 GND 8 GND 3 C R2820 33k GND 2 N.C. 1 VM S1002 CH + S1003 CH- S1005 S1004 VOL- VOL + IC1001 SBX3081-71 SIRCS — OUT S1006 — VCC GND 1 GND 2 9V 3 9V 4 VD+ E R2827 4.7k 1/10W CN2901 4P HP GND D1001 MTZJ-T-77 PROTECT E D TV-V R1007 100 D1003 MTZJ-T-77-91B 5 C1001 100mF 25V R1004 1k L2803 R2808 10k 1/10W D2802 1SS133 6 TO A BOARD R2807 3.3k 1/10W — R2800 22k 1/10W F 9-965-960-01<BA6S>HS R2801 47k 1/10W C2810 0.1 50V R2804 10k 1/10W Q2804 2SB709A-QR S-TX C2801 1 100V D1002 LNK0120022G F R2828 33k 1/10W C2809 0.33 10V B CN503 — C2804 0.22 50V C2862 10 50V R2805 4.7k 1/10W C2813 100 16V C2802 10 50V Q2803 2SB709A-QR S-TX D2801 MTZJ-T-775.6C R2803 22k 1/10W R2809 22k :CHIP R2824 100k 1/10W Q2802 2SB709A-QR S-TX C2808 0.01 25V B R2830 7.5MM Q2801 2SD601A-QR S-TX R2817 68k R2829 470k 1/10W D2808 1SS133T-77 R2825 100k 1/10W R2811 10 1/4W R2842 2.2k 1/10W R2857 15k Q2805 KTB764 QPVM R2840 2.7k DQPVM DQPVMA DQPPOA VCC1 OP60 OP6M OP6P GND HPIN GND HSAW DFD ISEL N.C DQPAA DFPHA DQPPHA VCC2 9VD DQPD GND HSAWIN R2833 5.6k 1/10W R2855 3.9k R2856 10k R2841 3.9k R2837 10k C2812 0.01 25V B R2834 3.3k R2890 33k C2824 0.047 16V B D2813 1SS133T-77 R2864 100 1/10W C2823 0.0027 50V IC2801 R2802 10k 1/10W C2821 0.01 25V B 11 S1001 R1011 680 C2803 0.22 50V R2821 8.2k 10 R1010 820 R1009 2.2k — TO CW BOARD CN2904 R2860 10k 1/10W R2815 68 1W 9 R1202 2.2k 8 R1203 6.8k R1008 6.8k 7 Q.P.Q.P.+ TOP R1201 1.5k 6 Q.P.- 3 CN2904 3P C2805 33000pF 400V 7 5 D2804 RGP10GPKG2 3 6 SIRCS 12 5 4 | 4 5V-STBY GND D 2 3 ON S S1007 1 GND POWER — 11 3 MPWR-LED R2818 100 1/10W Q2807 IRF614 QP OUT 2 LED-TMR D S TOP CN002 — M R1238 100k 1/4W 1 CN1004 7P TO A BOARD L2801 10mH R2826 2.2k 1/4W 12 D1004 MTZJ-T-77-91B — R1237 220 1/4W C1235 1 50V D1236 RD9.1EW-T1 2 5 R D1005 MTZJ-T-77-91B C B C2811 0.082 400V 13 7 D2807 ERA82-004T P5 14 6 KEY | CN2902 8P 15 5 MENU R1236 100k 1/4W 10 1 16 AUDIO R2 R1235 220 1/4W C1234 1 50V D1235 RD9.1EW-T1 | 4 17 3 Q2808 KTB764 OP OUT 9 3 18 GND AUDIO L2 R2819 47k 1/10W | 19 2 R2876 1k 1/10W — V 1 GND B J1231 3P R1234 75 C1238 5mm VIDEO 2 1 D2805 1SS133T-77 CN1005 7P 8 L2802 10mH D2806 1SS133T-77 CN004 — | 20 2 21 A | 22 1 V BOARD SCHEMATIC DIAGRAM CORRECTION R2893 33k 1/10W — V BOARD TRANSISTOR VOLTAGE LIST Q2801 Q2802 Q2803 Q2804 Q2805 Q2808 Q2812 Q2807 B 0 0 6.6 7.4 3.5 8.6 1.3 D 9.5 C 3.1 GND 0 6.6 1.8 4.3 GND G 6.3 E GND 4.1 7.2 8.0 4.2 9.0 2.0 S GND All voltages are in V. G TO D/GD BOARD CN1801 CN2903 3P — V BOARD IC VOLTAGE LIST IC2801 PIN VOLT 1 7.4 2 2.3 3 4.8 4 GND 5 6.3 6 4.5 7 9.0 8 5.8 9 4.6 10 4.8 11 12 13 14 15 16 17 18 19 20 21 22 N/C 3..5 3.8 4.5 9.0 4.6 4.6 4.5 GND 4.8 GND 0.3 DF-DRV 1 GND 2 GND 3 R2870 2.2k 1/10W H R2866 56k 1/4W Q2812 2SA933AS HP C2826 100p 50V CH VELOCITY MODULATION — 9-965-960-01<BA6S>V All voltages are in V. KV-27FA310/27FS120/29FA310/29FS120 42 KV-27FA310/27FS120/29FA310/29FS120 D1003 CLP811 4 VCC C1002 9V 6 V LED- TM R GND PW R- LED M POW ER ON B+ 200V NC M ENU/ SEL S1007 S1008 UP/ DOW N CH+ S1002 S1003 VOL- VOL+ S1004 VD+ HEATER E R2761 TV- V G1 3912 JW R3910 S1005 6 C2752 R1010 H1 C3908 R2757 4 C3907 GAP GROUND 1 Q3902 R3908 SPARK KG B E 11 3 CN3903 - 674A D2756 NC CN2753 E R2760 G2 10 R3907 KB R2758 R3909 5 VM 9 R2765 R2764 R2763 G1 7 R3936 R1011 H2 8 C3911 C3909 L3901 R2770 9 IC2751 3700 JW C2750 1 +15V - 15V D2758 8 S1001 C3930 R2762 2 R1234 R1201 R1203 C3913 D3903 8 R1009 3913 JW R3935 CH- R2789 C2778 RV2701 CN2751 1 C3914 D1004 R2788 R3719 C3703 3710 JW 3711 JW R2784 C2777 2701 JW R2785 C2754 D2701 R1202 R3707 C3701 C2753 1003 JW 5 C1003 D1005 1 1005 JW 1006 JW 4 C3708 2 C3931 FB3702 FB3700 R3706 R3704 L2751 C2755 H C3702 FB3701 FB3703 R2759 C2751 CN2707 JL700 R2768 R2767 R2766 C2775 C3912 3 R3700 3703 JW R VM E E G D2761 D2760 3707 JW B N/ S IK 9V 3701 JW 3706 JW D2759 3702 JW R3923 IC3701 1 1002 JW D3905 9 N/ S- N/ S+ CN2752 NC C2804 C2803 924- A J 1231 1004 JW CN2903 GND GND DF- DRV D1233 1 C2774 G CN1004 7 A- 1410- 2708 JW C1238 D2803 1 F SI RCS L2802 5V- STBY D2805 L2801 BA6- S04 3791 JW R R1236 Q2808 D2807 E Q2805 E R1235 C1234 D2806 3 1 L 2806 JW CLP801 E Q2807 D1236 C1235 D2801 R2826 D2804 R1237 KEY MENU C2801 C2802 R2814 2805 JW 2855 JW AUDI O R2 AUDI O L2 GND GND VI D2 1 CN2904 B 1202 JW VD+ GND R2811 R2830 S D2802 B G 172421411 D2808 1- 862- 189- 11 C2810 C2862 2801 JW D1235 L2803 R2815 D2813 22 12 C2805 VM NC D2809 CLP802 D 1 9V C2813 GND 2807 JW 1 IC2801 11 CN1005 7 HP 3 C2823 GND VM VM GND QP- QP- QP+ 2802 JW C2811 8 1 QP+ C 1008 JW GND 1007 JW 1 CN2901 Q2812 B E GND 2810 JW CN2902 I C1001 R2866 2803 JW O C1001 GND GND NC 135V C1819 JW 1201 A- 1415- 635- A D1001 3 C1820 3 C1818 CN1800 JW 1001 >PF- LP< 1 C1815 R1238 1 R1845 R1846 R1008 B 4 R1001 COMPONENT SIDE CLP810 3 2 D1002 R1004 1 [VELOCITY MODULATION] Q1810 B E R1851 CN1802 R1852 R1847 S1006 R1007 R1843 D1810 BA6- S04 [IR DETECTOR, FRONT VIDEO2] (ALL EXCEPT KV-27FA310/29FA310) GND POW ER R1848 8 CLP812 DF DF- DRV GND 5 7 CN1801 D1811 6 L1805 C1816 A 4 C1830 [DEFLECTION] (ALL EXCEPT KV-27FA310/29FA310) C1817 T1801 6 D1812 172421411 6 D1809 1- 862- 343- 11 5 1 4 R1844 3 R1850 HS V 2 R1849 D 1 [RGB DRIVE, CRT DRIVE, VELOCITY MODULATION] R1853 CW D2755 R2756 C3906 R3901 172421411 GND CN2755 J KV-27FA310/27FS120/29FA310/29FS120 A- 1410- 925- A J C3902 E 172421411 C3932 R3904 BA6- S04 1- 862- 190- 11 BA6- S04 R3902 C3901 R3922 RV2750 1 5 7 2 1- 862- 344- 11 C3910 C3903 >PF- LP< R3906 C3904 R3903 13 R3931 G1 2704 JW R3905 C3905 12 D2754 I A- 1415 D3902 D3901 KR B Q3901 43 KV-27FA310/27FS120/29FA310/29FS120 3 4 GND 8 6 1- 862- 343- 11 172421411 6 5 BA6- S04 4 3 2 CN1802 E R1849 R1847 R1850 R1851 B 4 R1852 Q1810 1 R1845 [VELOCITY MODULATION] CN1800 1 4 C 1 8 1 5 NC GND GND 135V OUT VCC R1846 C1820 R1001 C1819 GND R2833 R2860 R2818 C2806 DF- DRV GND R2827 GND R2828 R3793 9V IK B E G E R3794 Q3763 Q3762 D2759 R3795 D3762 C3782 R3769 R3792 R3765 R3762 R3763 D2760 Q3773 9 R3775 Q3772 R3772 R3773 Q3783 D2761 Q3782 R3782 R3783 R3768 R3767 R3766 L3710 R2766 D3763 Q3761 R3764 C2751 R3778 R3760 R3796 R3774 R3770 L3711 D3772 R3777 C3781 R3776 Q3771 R3771 R2768 D3773 R3788 L3712 R3786 R3787 R3784 C2754 R3780 R2759 R2785 D2758 G1 10 R2758 KB G2 4 KG 11 C2778 SPARK KR GROUND 12 G1 BA6- S04 D2754 R3905 R3931 TV- V 13 C3901 R3903 R3901 C3903 R3902 R3922 C3902 RV2750 J R3930 R3904 D2755 R2756 C3905 R3906 R1008 S1005 C3904 C3906 1- 862- 344- 11 D2756 R2757 GAP D3901 R2763 H2 HEATER R2764 E 1 IC2751 9 H1 G1 9 TP701 R2765 R3938 E NC VOL- VM B D3902 C3932 R2834 C2812 C2821 R2817 R2819 C2804 R Q3791 8 6 5 CN2753 R3908 R3907 1 BA6- S04 R3791 R2767 7 R2761 R3909 Q3905 Q3903 JR3911 R3921 R1011 S1004 Q3902 172421411 CN2752 C2753 C2752 C3908 C3907 C3910 C2809 C2750 R3910 CN3903 R3785 D3782 R3797 R3779 Q3781 C2777 L2751 R2760 3 N/ S D2804 R2820 R2821 R3706 R2784 VOL+ Q3906 C3780 R3700 FB3701 FB3700 C3700 L3901 J R3910 E R1010 S1003 R3920 CN2903 R2770 R3936 R3919 R3918 1 3 R2762 Q3908 Q3907 C2755 - 15 E +15 R3924 R3912 R3914 CN2751 JL700 VD+ NC HEATER B+ 200V R3913 CH- R1009 1 C3909 C2862 C2775 D2701 8 R3911 C3911 R3705 Q2772 D3903 R3916 S1002 RV2701 Q2807 D3783 R3704 C3701 R3703 R2788 R3915 D1004 CH+ C3930 C2774 1 FB3703 R3707 Q3700 R3721 R3935 R3934 R3917 N/ S + 3 1 C3703 R3720 C3915 R2789 R3933 D3905 S1001 D3906 FB3702 5 C3912 R3719 C3702 R3701 R3702 C3708 C3931 Q3904 VM R3714 Q3710 R3711 Q3711 R3710 JR3710 R3712 R3713 Q3712 R3923 C3920 R1203 R1202 N UP/ DOW S1008 Q3701 N/ S - 2 R2855 R2856 C2810 D2808 C2803 D2803 CN2707 IC3701 R2811 G D1005 C1003 ENU/ SEL M R1201 L2802 C3914 Q. P. - D2813 1 4 Q. P. - E C2823 C2824 R2864 R2893 L2801 C3913 I R829 B E BA6- S04 7 R2840 C2805 S Q2805 172421411 R2841 R2857 C2808 R2826 D1233 R2822 R2824 R2825 R2815 R2814 B GND SI RCS ER ON POW GND R LED- TM R- LED PW M 5V- STBY V 1- 862- 189- 11 C2811 R2842 12 D2809 E R2876 R2890 IC2801 Q2808 D3907 H C2826 CN2904 R2809 Q2802 L CN1004 R2837 11 22 D2807 D2806 R3932 D3908 G 1 C2802 C1234 R1236 F R2892 3 R2805 Q2804 D2801 E D2805 E 1 C2813 R2801 R2802 R1237 R1238 R R803 C2801 Q2801 S1007 E CN2902 VM N. C. Q2803 R2800 C1235 C1238 1 L2803 R2804 D1236 R1234 VM R2808 R2807 VD+ 6 R1235 VM R2870 D2802 HP CN1005 8 E 9V D1235 Q. P. + Q2812 E C Q. P. + R2866 B CN2901 KEY ENU M AUDI O R2 AUDI O L2 GND GND I C1001 VI DEO 2 1 E 9V 7 J 1231 1 C1002 1 D T1801 3 C1818 C1001 1 B R1004 CONDUCTOR SIDE 7 R1848 D1810 R1843 D1002 D1812 3 R1007 L1805 C1830 GND D1809 [IR DETECTOR, FRONT VIDEO2] (ALL EXCEPT KV-27FA310/29FA310) 6 C1817 D1001 D1003 A 5 CN1801 DF- DRV S1006 HS V 2 C1816 D [DEFLECTION] (ALL EXCEPT KV-27FA310/29FA310) 1 D1811 [RGB DRIVE, CRT DRIVE, VELOCITY MODULATION] 1 CW 2 7 5 1 E B CN2755 J KV-27FA310/27FS120/29FA310/29FS120 Q3901 1- 862- 190- 11 172421411 44 KV-27FA310/27FS120/29FA310/29FS120 GD BOARD SCHEMATIC DIAGRAM (KV-27FA310/29FA310 ONLY) 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | A R1615 0.1 1/2W — JW1600 12.5MM L1600 C1680 2.2m TO-CN601-A BOARD CN1600 2P R1626 8.2k R1629 470k R1627 5MM R1630 470k R1640 1k 1/4W 4 C 5 R1631 15k C1634 10 50V 6 — CT RT GND TIMER 7 C1635 4.7 50V SS C1637 0.1 50V R1651 100k — TO H/S Q600 Q601 9 R1650 100k TO H/S CC VS VB NC VG Q1600 IRFIB7N50A SW REG OUT R1658 10 1/4W C1609 680p 500V T1604 PIT R1660 10k VCI OCP P-GND C1643 0.1 50V R1659 10 1/4W C1647 47 25V VC2 C1648 1000p S C1672 47000p D1618 UF4005PKG2 3 Q1601 IRFIB7N50A SW REG OUT C1649 1000p R1670 10k R1672 0.1 2W R1671 0.1 2W D1631 1E3-TB C1642 220 50V E 4 2 R1617 1k 16 4 15 5 14 6 13 7 11 9 10 C1670 680p 500V D1621 MA6D50 JW1609 12.5MM L1609 5mm L1606 5mm C1616 2200 25V FB1609 1.1UH 6 LOW B 5 GND 4 GND 3 NC 2 +B 1 C1669 680p 500V L1605 5mm +B TO-CN602 A-BOARD R1668 1.2k 1/4W IC1601 DM-58 ERROR AMP D1615 D4SBL20UF3 12 8 CN1601 6P C1624 D1614 EZ0150AV1 FB1604 1.1UH FB1606 5MM R1619 0.47 1/4W 5 L1604 4 3 1 C1650 1000 R1616 1.2k 3 3 D1611 D4SBL20UF3 PIN5 R1647 91 PH1602 ON3171-R C1604 680p 500V 18 17 FB1618 5MM C1617 33 160V L1608 1 FB1619 5MM C1602 C1645 0.001 R1632 100 FB1602 1.1UH S 8 D NC 17 F/B IC1600 MCZ3001DB SW REG CON 16 2 3 C1633 0.001 50V VD 15 VSENSE R1625 470 14 1 — FB1616 1.1UH FB1617 1.1UH 18 C1620 0.01 13 1 12 AC/DC- 11 2 10 B JW1601 12.5MM AC/DC+ R1620 10 1W -2 CN1402 4P FB1607 5MM R1618 5MM R1667 10k C1652 0.047 1 1 2 PS1401 3 4 AUDIO Vcc AUDIO Vcc AUDIO GND AUDIO GND TO-CN404 A-BOARD — C1820 0.47 160V R1851 6.8k R1852 6.8k T1801 R1853 5.0MM F 3 4 2 C1818 1000pF C1819 220pF 1 6 CN1802 1P — 1 DF R1849 10k R1850 10k (FOR DF) G R1848 2.2k 2W — R1844 10.0MM Q1810 2SC3840K DF-DRV D1809 MTZJ-T-7715B H D1810 ERA38-06TP 1 C1816 220p 500V B D1811 ERA38-06TP 1 TO A BOARD CN505 C1817 0.0039 630V L1805 10mH D1812 1N4937/23 R1847 100k 1/4W C1815 0.022 630V R1846 100k 1/4W R1845 100k 1/4W GD BOARD POWER SUPPLY — DEFLECTION 2 1 KV-27FA310/27FS120/29FA310/29FS120 GND GND TO:V BOARD CN1801 3P DF-DRV — 3 I 9-965-960-01<BA6S>GD CN2903 45 KV-27FA310/27FS120/29FA310/29FS120 GD [POWER SUPPLY, DEFLECTION] COMPONENT SIDE (KV-27FA310/29FA310 ONLY) 7 KV-27FA310/27FS120/29FA310/29FS120 CN1601 R1647 EY116 R1629 C1620 R1621 C1602 R1658 S G Q1600 EY21 G Q1601 C1643 D1618 EY70 D1607 R1670 FB1616 18 FB1617 C1628 10 R1659 EY24 EY81 EY79 EY64 R1650 S EY68 EY23 36 JW EY37 D1610 C1672 FB1602 + D1617 EY38 R1660 EY82 EY83 C1647 R1672 FB1618 37 JW FB1604 EY67 EY80 EY84 R1615 R1640 C1627 FB1619 C1604 C1609 D1614 EY90 D1609 EY85 EY88 EY89 EY4 D1611 - D1615 EY34 + EY87 1 R1627 C1649 612 JW 31 JW 32 JW EY33 EY14 L1608 EY86 C1617 I C1601 R1667 1458 JW C1652 EY100 33 JW C1624 FB1607 FB1606 IC1600 R1632 EY3 R1671 EY32 R1620 1457 JW EY99 1460 JW +B JW 1461 NC +B LOW B E R1668 EY13 All voltages are in V. GND E GND 6 C 59.7 1 Q1810 B 0.0 GND CN1402 R1610 C1626 L1604 PS1401 AUD GND AUD VCC S 156.0 0.0 AUD VCC G 160.0 4.9 AUD GND D 313.0 155.0 D 4 Q1600 Q1601 C1820 1 GD BOARD TRANSISTOR VOLTAGE LIST C1625 9 R1626 R1619 C1669 HS621 R1630 C1634 C1645 D1621 C1650 R1612 D1613 C1637 R1696 D1631 R1631 - C1633 EY63 C1642 2 FB1609 EY31 EY96 EY95 3 HS615 R1852 R1628 4 R1609 R1851 JW 1606 L1606 1 C PH1602 R1625 L1605 D1612 R1617 R1618 R1616 C1670 C1621 JW 1605 L1600 R1850 JW 1609 EY115 EY117 EY111 + L1609 C1615 JW 1601 EY109 C1629 JW 1607 D1605 C1616 R1600 R1849 R1602 JW 1800 JW 1801 11 JW 1604 C1619 172421511 EY106 1- 862- 191- 11 R1845 JW 1600 JW 1602 EY104 C1817 CLP812 C1815 C1819 C1818 JW 1603 R1847 R1846 EY118 EY108 R1848 C1830 B JW 1611 - Q1810 JW 1610 EY107 EY101 EY105 AC/ DC- EY103 B E 10 C1680 EY102 CLP811 R1844 R1843 BA6S04 C1613 T1801 D1810 DF CN1600 D1809 3 GND D1812 D1811 C1816 All voltages are in V. R1853 A 2 GND L1805 1 DF- DRV 927- A 9 EY114 CN1801 A- 1410- 8 EY113 6 EY112 5 C1635 4 EY110 3 AC/ DC+ 2 C1614 1 CN1802 IC1601 PIN VOLT 1 133.7 2 N/C 3 2.5 4 11.3 5 GND 3 IC1600 PIN VOLT 1 2.5 2 1.8 3 2.2 4 2.5 5 GND 6 0.0 7 4.0 8 17.2 9 GND 10 10.4 11 0.0 12 4.6 13 N/C 14 163.6 15 153.5 16 157.6 17 N/C 18 340.0 1 GD BOARD IC VOLTAGE LIST EY22 EY69 34 JW HS601 R1651 C1648 HS600 T1604 46 KV-27FA310/27FS120/29FA310/29FS120 GD [POWER SUPPLY, DEFLECTION] CONDUCTOR SIDE (KV-27FA310/29FA310 ONLY) 1 2 3 4 5 6 7 8 9 10 11 GND C1816 GND D1812 D1811 DF C1830 L1609 R1852 C1648 R1651 AUD GND AUD GND AUD VCC C1604 LOW B GND GND NC +B C1624 4 1 +B R1668 R1610 C1626 R1667 C1652 IC1601 C1617 CN1402 D1614 C1609 L1604 AUD VCC C1650 + C1820 - D1611 T1604 FB1619 FB1618 C1672 FB1604 + Q1601 FB1602 Q1600 C1649 S HS601 C1643 G HS615 D1609 R1670 D1618 R1620 C1625 R1671 FB1606 PS1401 C1669 D1621 - L1605 FB1609 R1609 R1851 D1615 L1606 2 3 C1670 10 C1627 R1659 D1607 S R1672 R1647 C1647 C1602 D1617 C1628 D1610 R1650 1 4 C1642 C1637 C1635 C1634 18 R1658 G FB1617 FB1616 IC1600 R1660 KV-27FA310/27FS120/29FA310/29FS120 R1616 R1632 1 HS600 HS621 FB1607 R1640 E R1850 PH1602 D1631 R1619 R1618 C1616 R1696 R1631 R1626 R1621 D1613 R1612 R1630 9 C1645 R1627 D R1849 R1617 R1625 C1620 R1629 R1615 C C1619 R1628 C1633 C1819 T1801 R1846 R1845 C1818 R1847 Q1810 C1817 R1600 R1602 E C1815 L1600 D1810 C1614 D1605 C1613 D1612 R1848 B 172421511 CN1802 L1805 R1843 CN1600 1- 862- 191- 11 C1615 B D1809 C1621 C1629 AC/DC- AC/DC+ C1680 A 3 DF-DRV CN1801 1 L1608 1 CN1601 6 47 KV-27FA310/27FS120/29FA310/29FS120 HR BOARD SCHEMATIC DIAGRAM (KV-27FA310/29FA310 ONLY) 1 | 2 | 3 | 4 | 5 | A B GND VCC — OUT IC3001 SBX3071-71 DETECTOR BOTTOM D3001 MTZJ-T-77-5.6B IN D3002 LNJ801LPDJA TIMER LED CN3001 6P L TYPE :S-MICRO BEZNET TO A BOARD R3001 1k — C3001 100 CN002 1 TIMER LED 2 MPWR LED 3 4 C 5 6 GND STBY 5V SIRCS POWER ON R3014 100 — S3006 D — E 9-965-960-01<BA6S>HR KV-27FA310/27FS120/29FA310/29FS120 48 KV-27FA310/27FS120/29FA310/29FS120 HR [SIRC, LEDS, MAIN POWER BUTTON] COMPONENT SIDE (KV-27FA310/29FA310 ONLY) 1 HR [SIRC, LEDS, MAIN POWER BUTTON] CONDUCTOR SIDE (KV-27FA310/29FA310 ONLY) 2 1 2 >PF-LP< A S3006 R3014 R3001 CN3001 SI RCS PW R ON GND STBY 5V M PW R TM R GND M R PW STBY SI RCS D3002 ER TI M 6 1 R ON PW C3001 D3003 O O KV-27FA310/27FS120/29FA310/29FS120 B D3003 C3002 G G IC3001 172112212 I C3001 D3002 1-684-544-12 R3002 R3001 CN3001 C3001 R3002 B D3001 C3002 D3001 172112212 251- A 1-684-544-12 A- 1400- R3014 S3006 A 49 KV-27FA310/27FS120/29FA310/29FS120 HU BOARD SCHEMATIC DIAGRAM (KV-27FA310/29FA310 ONLY) 1 | 2 | 3 | 4 | A U D S1008 M TOP — S1007 S TOP CN004 TO A BOARD CN1002 7P B — VIDEO 2 1 GND 2 GND 3 AUDIO L2 4 AUDIO R2 5 MENU 6 KEY 7 R1002 2.2k 1/4W R1003 1.5k 1/4W D2240 MTZJ-T-77-10B R2011 680 1/4W D2241 MTZJ-T-77-10B R2010 820 1/4W S2001 S2002 VOL- VOL+ R1001 6.8k 1/4W R2008 6.8k 1/4W R2009 2.2k 1/4W S2003 S2004 CH- CH+ S2005 TV/V C — D C2240 5.0mm — E D301 RD9.1EW-T1 R2235 220 1/4W C2234 0.47 D2235 RD9.1EW-T1 R2237 220 1/4W V R2240 75 1/4W L R2236 100k 1/4W C2235 0.47 J2231 3P R R2238 100k 1/4W D2236 RD9.1EW-T1 — F 9-965-960-01<BA6S>HU KV-27FA310/27FS120/29FA310/29FS120 50 KV-27FA310/27FS120/29FA310/29FS120 HU [FRONT A/V, MENU KEY] COMPONENT SIDE (KV-27FA310/29FA310 ONLY) CN1004 R2009 S2001 S2002 S2003 M ENU GND KEY R2235 M ENU/ SEL UP/ DOW N S1007 R2010 R1001 GND AUD L2 AUD R2 R1002 R1003 6 POW ER GND SI RCS 5V STBY M PW R LED D2240 D2241 D2236 GND AUDI O2 R AUDI O2 L VI DEO 2 GND KEY ENU M V2 R2011 S2005 7 S1008 C2246 POW ER CLS1003 C2245 JW 1004 S2004 PS2001 172421311 CN1002 1 CN1003 R2008 D2237 CN1001 1- 862- 188- 11 12 10 1 >PF- LP< C2004 C2241 C2244 FB2005 B BA6S 1 R2012 C2243 JW 1006 1 CN1005 JW 1007 SI RCS 5V O 5V STBY 14V NC NC I TM R LED I C1001 HS001 PW R LED M C2242 CLS1007 3 1 GND GND A 9 D2238 8 D2239 7 ER LED TI M 6 R2240 5 D301 4 D2235 3 C2240 2 CLS1006 1 C2235 C2234 R2236 R2238 J 2231 R2237 A- 1410- 923- A CH+ C KV-27FA310/27FS120/29FA310/29FS120 TV/ V VOL- VOL+ CH- 51 KV-27FA310/27FS120/29FA310/29FS120 HU [FRONT A/V, MENU KEY] CONDUCTOR SIDE (KV-27FA310/29FA310 ONLY) 1 2 3 4 5 6 7 8 9 10 11 12 13 CLS1006 CLS1003 R2237 V2 CN1005 C2245 TIMER LED MPWR LED 5V STBY SIRCS MENU POWER VIDEO 2 KEY GND R1003 S1008 R2010 R2011 C2241 D2237 R2008 CH+ S2004 CH- VOL+ S2002 VOL- S2001 TV/ V PS2001 FB2005 R1002 C2244 GND GND AUD L2 5V C2243 R1001 S2003 KV-27FA310/27FS120/29FA310/29FS120 NC C2246 V GND 1 R2009 L 1 3 CN1004 CLS1007 CN1003 R2236 J 2231 R AUD R2 KEY MENU R2235 12 C2004 C GND 1 7 S1007 R2238 AUDIO2 R D2240 D2241 D2236 C2240 D2235 D301 TMR LED GND SIRCS MPWR LED C2234 R2240 C2235 5V STBY POWER B CN1002 AUDIO2 L O 1 6 C2242 HS001 NC I C1001 14V 172421311 GND CN1001 1- 862- 188- 11 R2012 D2239 A I D2238 BA6S S2005 52 KV-27FA310/27FS120/29FA310/29FS120 K BOARD SCHEMATIC DIAGRAM (KV-27FA310/29FA310 ONLY) 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 A K BOARD IC VOLTAGE LIST 19V C2428 2200 25V IC2403 NJW1164 C/SW PROCESSOR C2460 SW L IN-2 IN+1 GND IN+2 OUT2 IN-1 2 16 4 >PF- LP< KV-27FA310/27FS120/29FA310/29FS120 1 CN2400 R L GND RT LT R2467 R2436 C2473 JR2403 R2437 R2418 R2419 E C2475 R2480 R2457 D2452 C2496 C2427 R2445 R2481 R2442 C2430 JR2402 JR2401 D2401 R2492 R2498 C2421 C2420 D2453 C2495 R2444 R2441 R2402 D2400 1- 862- 187- 11 172421211 Q2410 17 C2493 C2495 C2496 C2494 Q2412 HS2401 1- 862- 187- 11 172421211 E Q2413 16 D2451 4 1 CN2400 D2450 C2493 R2483 C2448 17 2 R2499 EY2401 C2448 EY2403 I C2401 IC2401 1 R2507 1 C2459 C2414 C2459 D Q2411 R2424 EY2400 C2423 C2458 EY2402 C2414 C2424 R2425 C2411 Q2414 C2457 R2434 C2457 C2430 R2505 C2461 C2461 R2428 R2423 C2413 R2482 R2524 C2462 C2401 JR2421 JR2420 JR2413 JR2412 C2456 C2463 C2464 C2412 C2402 C2403 C2460 R2433 R2403 R2429 C2454 R2477 R2479 SW- C2425 C2469 C2456 R2488 R2440 R2426 C2426 C2466 C2465 C R2468 R2478 JR2410 R2432 C2427 C2420 R2431 R2490 C2405 BA6S04 R2476 JR2411 C2452 C2453 R2422 C2490 R2430 C2451 C2469 C2445 JR2407 R2491 C2407 IC2402 C2421 R2415 R2416 R2417 CS- C2450 R2404 A-1410- 921-A C2468 C2467 R2421 R2420 C2488 R2427 Q2401 D R2443 HS2401 BA6S04 9-965-960-01<BA6S>K Q2400 P C2428 C2401 R2495 C2415 C R2485 C2416 C2455 R2522 47k PS2401 — Q2419 2CS2412K-T C2486 C2487 R2487 R2489 R2496 R2406 R2407 R2409 AUDIO C2417 R2460 C2460 R2484 R2486 C2489 B R2405 C2405 IC2403 K BOARD R2523 47k C2404 R O R2401 C2408 C2403 C2490 C2447 IC2404 C2402 C2499 C2406 C2445 5 C2484 R L C2476 C2410 C2479 4 B Q2418 R2474 C2485 L SW L R2497 C2475 3 JR2406 IC2405 GND R2470 R2471 R2472 R2475 C2478 D2403 2 R2437 10k C2483 C2477 2 R2411 R2469 C2481 C2413 LT R2436 1k A C2410 C2419 C2422 C2429 C2482 SW R 1 C2431 C2472 R2465 R2462 R2466 R2473 RT C2432 R2463 C2484 C2446 C2474 C2473 R2461 C2471 R2464 C2470 C2485 A CN2402 C2411 75k C2478 4700p 4 5 1 7 JR2422 R2475 CN2401 1 CS+ C2476 51k 1 7 1 3 JR2404 R2472 CN2401 CN2402 5 2 C2447 C2441 C2442 R2412 R2413 C2443 C2444 33k 1 C2428 R2474 R2458 CN2402 5P 4 R2447 4700p 1.8k C2475 L 3 JR2423 R2471 R2470 39k 2 2 C2481 R 1 R2473 2.2M R2504 15 R2520 14 C2474 13 C2440 12 CONDUCTOR SIDE (KV-27FA310/29FA310 ONLY) R2494 FIL2 FIL2 11 [AUDIO] SW+ K [AUDIO] C2450 K R2502 R2503 1k R2484 3.9k R2482 10k CEN FIL2 F1 SP FL-OUT F1 CH IC2405 NJM2180 TRUSURROUND COMPONENT SIDE (KV-27FA310/29FA310 ONLY) FR-OUT RL-OUT FL-IN FR-IN C-OUT RR-OUT 10 R2486 51k R2480 0 R2457 C2484 RR-IN SUB-OUT RL-IN V+ C-IN GND S-IN VREF FIL-3 MODE1 9 C2426 100p 50V 16 R2493 C2474 8 17 R2519 R2521 10k FIL-3 FIL-3 7 18 C2412 — R2443 47k 6 19 1 R2519 1k TO-CN402 ABOARD Q2400 2S2412K-T-146-Q C2473 5 20 R2426 470 1/10W R2410 — R2520 1k R2466 6.2k 4 21 C2425 0.1 16V B C2427 47 25V R2414 R2494 100k R2463 1.5k 3 22 4 R2425 39k 1/10W C2424 0.0068 25V B R2497 1.5k C2470 4700p 2 23 3 R2427 470 1/10W 10k R2402 10k 10k D2401 -2 1 R2469 7 24 MODE2 R2464 51k R2442 1k N R2462 75k 10k R2493 100k R2465 1.8k 25 2 All voltages are in V. C2433 PGND R2481 1.5k 26 1 IC2402 NJM4558M-T AUDIO FILTER C2438 6 R2488 2.2k C2471 4700p 27 R2487 11k C2489 5 C2439 5 R2461 33k 28 R2495 20k 6 R2408 C2480 HEADPHONES AUDIO/VCC Q2401 2SC2412K-T -146-QR R2468 4 R2432 0 29 L S MODE3 3 R2458 2.2M C2430 10k 9V GND 30 R2467 2 R2434 100k R2440 22k R2441 R2489 15k 150k 7 1 M SDA C2482 TO-CN403 ABOARD C2472 — R C2485 C C2488 4700p C2486 100k R2476 15k R2478 100k R2419 100 1 R2496 15k R2477 R2479 R2418 100 R2424 39k 1/10W C2487 R2485 1k — VCC R2421 22k 1/10W J 8 C2423 0.047 16V B OUT1 C2421 0.47 SW R SP R2500 4.7k R2423 39k 1/10W CEN C2420 0.47 — R2428 4.7k SW R2420 22k 1/10W E GND 0.0 4.8 4.8 4.9 4.9 GND GND GND R2448 R2417 22k R2416 22k SCL R2448 100k R2422 10k 1/10W C2459 C 0.0 17.9 0.0 0.0 0.0 0.0 0.2 0.7 0.0 R2446 R2446 10k C2401 B 0.7 0.0 4.8 4.8 4.8 4.8 0.0 0.0 0.0 Q2400 Q2401 Q2410 Q2411 Q2412 Q2413 Q2414 Q2418 Q2419 R2500 C2491 VCC R2429 4.7k 1/10W R2453 R2454 GND C2458 C2464 AUX2 K BOARD TRANSISTOR VOLTAGE LIST C2457 R2521 18 SCL C2456 Q2419 AUX1 All voltages are in V. R2449 47k C2432 19 SDA 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 C2455 C2446 22 CTL 17 18 19 20 21 22 23 24 25 26 27 28 29 30 10k R2450 C2437 C2402 C2446 CTH 17 — VREF 16 R2456 100 SR-FIL CVA 12 100 R2455 OUT R2447 1k C2436 11 C2462 C2461 TONE-L CUB 4700p C2435 26 25 SS-FIL C2453 Q2418 C2463 33000p C2434 C2464 C2452 C2454 24 AGC 3300p 23 OUT C2451 27 3 4 5 TONE-L 21 SW L TONE-H 1k R2454 R2453 47k TONE-IN TONE-H 20 C2465 C TONE-IN 6 4700p BBE-OUT 7 R2414 15k R2435 10k R2490 100k C2466 BBE2 BBE-OUT 8 R2452 1k BBE1 BBE2 9 R2403 4.7k BBE1 33000p 29 3300p 2 C2468 SW 28 1 R2451 100k 19 C 30 C2450 C2469 R2451 R2452 100k R2435 C2403 R2401 C2462 SPKR+ C2448 C 4700p H L SW- JR2405 VCCR C2405 C2404 R2433 10k CN2401 7P 4 CN2400 4P R2523 20 CS- C2431 CNT-A CS+ 3 R2438 R2439 21 SW+ 2 SW+ 10 R-AB-IN CNT-B JR2411 0 1 R2450 24 JR2410 0 R2439 10k S 25 LPF JR2421 0 C2409 26 C+ C- C2449 27 R2491 100k — TO-SUB-WOOFER R2522 MODE-CNT C2449 47000p R2438 10k SW R K JR2420 0 R2449 28 C2447 -2 R2501 L-OUT CENTER-CNT 18 C2496 54 4.0 55 4.0 56 4.0 57 4.0 58 4.0 59 4.0 60 4.0 61 4.0 62 4.0 63 4.0 64 n/c IC2405 PIN VOLT 1 7.7 2 4.6 3 0.0 4 4.5 5 0.0 6 9.0 7 n/c 8 n/c 9 n/c 10 n/c 11 4.5 12 4.5 13 4.5 14 4.5 15 4.5 16 4.5 C2406 GNDR -2 N-LNT-E NC 17 -2 C2414 R2504 22k C2413 1000 35V C2412 0.47 50V 13 16 D2400 MA111-TX C2467 I R2499 22k C2407 SPKR- INR1 NC INL2 INR2 SGND MODE1 INL1 SVR SPKL- VCCL MODE2 GNDL 17 SW- L C2477 — 16 14 VCC 15 NC R-AB-OUT L-INBUF-OUT R-IN 14 15 15 13 14 100 G 12 13 R 100 C2479 11 12 4.0 4.0 4.37 4.0 4.0 n/c n/c n/c n/c 4.0 9.0 4.0 4.0 1.45 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 0.0 n/c n/c 4.0 3.0 3.0 3.0 R2455 R-OUT 29 R2431 C2443 680p 10 11 SW R2430 C2442 47000pF 9 R-INBUF-OUT NC — 8 10 Q2413 2SB709A MUTE 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 R2456 30 22 7 9 C2495 R2503 22k Q2411 2SB709A MUTE 28 4.5 29 4.5 30 4.5 IC2404 PIN VOLT 1 n/c 2 4.0 3 4.0 4 4.0 5 4.0 6 GND 7 n/c 8 3.8 9 4.0 10 4.0 11 4.0 12 4.0 13 4.0 14 4.0 15 4.0 16 n/c 17 n/c 18 4.0 19 5.8 20 GND 21 GND 22 4.0 23 2.65 24 4.0 C2458 L+R-OUT L-BPF-IN 6 8 31 63 C2444 47000p 7 R2501 22k IC2403 PIN VOLT 1 4.5 2 4.5 3 4.5 4 4.5 5 4.5 6 4.5 7 4.5 8 4.5 9 1.0 10 4.5 11 3.4 12 3.3 13 4.5 14 4.5 15 GND 16 9.0 17 4.9 18 0.0 19 3.88 20 3.88 21 4.5 22 4.5 23 4.5 24 4.5 25 4.5 26 4.5 27 4.5 SCL SDA 9V GND HPHON VCC PGND L-R-OUT 23 5 6 R2524 0 32 REF 4 5 Q2412 2SB709A MUTE R2502 22k C2493 R2498 22k -2 C2411 NC HPF 3 4 -2 S-OUT 2 3 33 C-RECT-OUT 1 2 NC C-OUT 34 CENTER-MODE 35 L-BFP-OUT NC SPKL+ C2407 100k R2405 36 S-OUT 6800p NR-IN C2408 VREF VREF 37 62 64 1 Q2414 2SD601A MUTE Q2410 2SB709A MUTE C2494 38 IREF NR-WT LPF-OUT NR-VCF R2407 15k C2415 LPF-INN-IN R2460 8.2k LPF-NINN-IN NR-TC NC VCS-TC3 39 61 C2441 680p F 40 L-AB-OUT R2411 47k 41 L-IN R2410 15k 42 L-AB-IN C2480 S-RECT-OUT AB-HOLD-TC C2440 7.5k L-RECT-OUT 60 43 C2445 R2408 — 59 44 C2490 R2409 10k 1/10W PS2401 IC2404 NJM2177 DOLBY SURROUND AB-GATE 22000p R-RECT-OUT 45 9V R2404 15k C2406 R2483 22k IC2401 TDA8947J AUDIO AMP 4.7M C2439 58 46 R2415 22000p 57 C-RECT-OUT C2499 470p GND C2438 S-RECT-OUT 47 R-RECT-TC E 56 R-BPF-OUT C2436 C2437 VLR-TC2 R-BPF-IN C2435 VLR-TC1 55 47k C2434 — 54 7.5k 0.22mF VCS-TC1 R2413 C2433 53 48 R2412 C2432 VCS-TC2 49 NC C2419 C2422 C2431 D 52 L-RECT-TC C2429 50 VLR-TC3 51 — C2418 R2459 470k C C C2410 4700p R2406 C2417 CHIP — C2416 5600p R2505 47k R2492 22k 8.2k B IC2401 PIN VOLT 1 8.3 2 GND 3 19.6 4 8.3 5 19.6 6 3.2 7 GND 8 0.0 9 3.2 10 9.1 11 9.7 12 3.2 13 3.3 14 8.3 15 GND 16 19.6 17 8.3 IC2402 PIN VOLT 1 4.5 2 4.5 3 4.5 4 GND 5 4.5 6 4.5 7 4.5 8 9.0 R2507 100 -2 C2418 -2 R2459 — JR2402 0 C2415 JR2401 0 C2494 53 KV-27FA310/27FS120/29FA310/29FS120 5-4. SEMICONDUCTORS 2SB709A-QRS-TX 2SD601A-QRS-TX 2SB734-T-34 2SC3209LK-TP 2SC3840K 2SA1309A-QRSTA 2SC3311A-QRSTA 2SD2144S-TP-UVW 2SA1837 LETTER SIDE LETTER SIDE C B E E E C B 2SA1091O-TPE2 IRF614 E C B G ERA38-06TP1 ERA82-004TP5 1SS133T-77 D1NS0R-TA MTZJ-T-77-12C MTZJ-T-77-15B MTZJ-T-77-33B MTZJ-T-77-39 CATHODE ANODE D2SB60A-F04 E C 2SK2663 D C B B 2SC4793 G D B C E 2SD2578-YB 12 S S RU-1P ERC06-15S EGP20DPKG23 MTZJ-T-77-5.1C MTZJ-T-77-5.6C MTZJ-T-77-7.5A MTZJ-T-77-10B MTZJ-T-77-30D RGP10-GPKG3 RGP02-17PKG23 RGP15GPKG23 CATHODE RD9.1EW-T1 ERB44-06TP1 1SS83TD GP08DPKG23 RGP10GPKG23 RU4AM-T3 3 MA111-TX UDZ-TE-17.5.1B UDZ-TE-17.91B CATHODE ANODE ANODE ANODE DAP202K-T-146 CATHODE D4SB60L-F 3 { ’ + 2 ~ ~ ’ 1 - 3 { ’ 2 ’ 1 D5LC20U TF541M MARKING SIDE VIEW CATHODE ANODE CATHODE CATHODE ANODE KV-27FA310/27FS120/29FA310/29FS120 GATE 54 KV-27FA310/27FS120/29FA310/29FS120 SECTION 6: EXPLODED VIEWS NOTE: The components identified by shading and Replace only with part number specified. * Items marked with an asterisk are not stocked since The component parts of an assembly are indicated by the reference numbers in the far right column of the parts list and within the dotted lines of the diagram. Components not identified by a part number or description are not stocked because they are seldom required for routine service. NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. mark are critical for safety. ! they are seldom required for routine service. Expect some delay when ordering these components. 6-1. PICTURE TUBE (KV-27FS120/29FS120 ONLY) 4-388-477-01 4-046-765-12 SCREW(3X16),TAPPING,+BV WASHER SCREW, TAPPING 7+CROWN WASHER 13 14 15 19 18 16 20 12 17 9 8 1 10 7 11 6 20 2 3 REF. NO. 4 5 PART NO. DESCRIPTION 1 2 3 4 5 X-4043-163-1 4-046-160-31 4-089-056-11 4-089-016-01 4-089-057-11 BEZNET, ASSY EMBLEM, SONY NO.9 DOOR LABEL, DOOR BUTTON, POWER ! 6 7 8 4-089-058-01 4-083-303-01 8-735-082-05 ! 8 8-735-083-05 ! 9 10 8-451-494-41 1-452-896-11 GUIDE, LED SPRING, METAL CRT 29RSN(SDP) (ALL EXCEPT KV-29FS120 L. SOUTH) CRT 29RSN(SDP)(SOUTH) (KV-29FS120 L. SOUTH ONLY) DY Y29RSA-V COIL, NA ROTATION (RT-200) * ! KV-27FA310/27FS120/29FA310/29FS120 [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] ! 11 12 4-089-062-02 1-419-156-21 ! 12 1-419-523-21 13 14 15 4-083-414-01 1-452-885-11 4-062-970-12 SUPPORTER, CRT COIL, DEGAUSSING (ALL EXCEPT KV-29FS120 L. SOUTH) COIL, DEGAUSSING (KV-29FS120 L. SOUTH ONLY) PIECE A(110), CONV CORRECT MAGNET, LANDING CLIP (29RSN), DGC 16 17 18 19 20 4-036-329-01 8-453-011-11 4-053-005-01 4-081-170-01 1-825-206-11 SPRING (B), TENSION NECK ASSEMBLY 299-M SPACER, DY PLATE, TLH CORRECTION LOUDSPEAKER (6X12CM) [2-7] * ! 55 KV-27FA310/27FS120/29FA310/29FS120 NOTE: The components identified by shading and Replace only with part number specified. ! mark are critical for safety. NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. 6-2. CHASSIS (KV-27FS120/29FS120 ONLY) 4-388-477-01 7-685-663-71 4-046-765-12 7-685-648-79 SCREW(3X16),TAPPING,+BV WASHER SCREW +BVTP 4X16 TYPE2 IT-3 SCREW, TAPPING 7+CROWN WASHER SCREW +BVTP 3X12 TYPE2 IT-3 55 50 49 51 52 48 53 46 54 47 45 44 43 41 42 40 REF. NO. * * * * 40 41 42 43 * 43 ! ! 44 45 46 PART NO. DESCRIPTION REF. NO. [ASSEMBLY INCLUDES] A-1410-924-A A-1410-925-A A-1415-674-A A-1052-931-A V BOARD, MOUNTED CW BOARD, MOUNTED HS BOARD, MOUNTED A BOARD, COMPLETE (KV-29FS120 L. SOUTH ONLY) The high-voltage leads associated with the FBT on the A board are not included and must be ordered separately. (See 50-52) A-1302-967-A A BOARD, COMPLETE (ALL EXCEPT KV-29FS120 L. SOUTH) The high-voltage leads associated with the FBT on the A board are not included and must be ordered separately. (See 50-52) 8-598-593-50 1-766-374-11 1-500-586-11 TUNER, FSS BTF-WA421 PLUG, F-PIN FILTER, CLAMP (FERRITE CORE) (KV-29FS120 L. SOUTH ONLY) KV-27FA310/27FS120/29FA310/29FS120 DESCRIPTION [ASSEMBLY INCLUDES] ! 47 1-824-069-11 ! 47 1-757-840-12 ! 48 49 50 4-084-918-01 1-453-310-21 1-251-374-14 CORD, AC POWER (WITH CONNECTOR) (ALL EXCEPT KV-29FS120 L. SOUTH) CORD, POWER (WITH CONNECTOR) (KV-29FS120 L. SOUTH ONLY) HOLDER, HV CABLE FBT ASSY NX-4521//X4J4 [50-52] CAP ASSY, HIGH-VOLTAGE 51 52 53 54 55 1-900-800-65 1-900-803-22 A-1415-635-A 3-696-606-02 4-089-050-32 CONNECTOR ASSY, FOCUS LEAD WIRE ASSY, G2 LEAD D BOARD, MOUNTED HINGE, VI COVER, REAR ! ! ! * * PART NO. 56 KV-27FA310/27FS120/29FA310/29FS120 NOTE: The components identified by shading and Replace only with part number specified. ! mark are critical for safety. NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. 6-3. PICTURE TUBE (KV-27FA310/29FA310 ONLY) 4-388-477-01 4-046-765-12 7-685-663-71 7-685-661-14 4-384-096-01 24 SCREW(3X16),TAPPING,+BV WASHER SCREW, TAPPING 7+CROWN WASHER SCREW +BVTP 4X16 TYPE2 IT-3 SCREW +BVTP 4X12 TYPE2 IT-3 SCREW (4X16), TAPPING, +P 23 22 21 25 20 28 27 26 14 19 18 13 15 16 9 17 12 11 1 7 10 6 8 2 3 REF. NO. PART NO. 1 X-4043-169-2 1 X-4043-169-1 ! 2 3 4 5 6 7 8 4-046-160-31 4-087-375-31 4-087-376-21 4-087-150-41 4-087-156-01 4-087-374-11 8-735-082-05 ! 8 8-735-083-05 * ! 9 10 11 12 13 1-825-417-21 1-452-896-11 8-451-494-41 4-036-329-01 1-419-156-22 ! 13 1-419-156-21 ! ! 4 5 DESCRIPTION 9 [ASSEMBLY INCLUDES] BEZNET ASSY [2-7] (KV-27FA310 ONLY) BEZNET ASSY [2-7] (KV-29FA310 ONLY) EMBLEM, SONY NO.9 DOOR, CONTROL LABEL, FRONT TERMINAL BUTTON, POWER GUIDE, LIGHT SPRING, DOOR CRT 29RSN(SDP) M68LNH050X (KV-27FA310 & KV-29FA310 L. NORTH ONLY) CRT 29RSN(SDP)(SOUTH) (KV-29FA310 L. SOUTH ONLY) LOUDSPEAKER (16X12CM) COIL, NA ROTATION (RT-200) DY Y29RSA-V SPRING (B), TENSION COIL, DEGAUSSING (KV-27FA310 ONLY) COIL, DEGAUSSING (KV-29FA310 L. NORTH ONLY) KV-27FA310/27FS120/29FA310/29FS120 PART NO. DESCRIPTION ! REF. NO. 13 1-419-523-21 ! 14 15 16 17 18 19 20 4-083-414-01 1-452-885-11 4-062-970-12 8-453-011-11 4-053-005-01 4-081-170-01 4-093-996-12 20 4-093-996-11 21 22 23 24 25 26 27 28 A-1606-603-A 4-101-820-01 1-825-809-11 1-825-807-11 X-2022-510-1 4-101-830-01 1-828-903-11 4-068-528-41 COIL, DEGAUSSING (KV-29FA310 L. SOUTH ONLY) PIECE A(110), CONV CORRECT MAGNET, LANDING CLIP (29RSN), DGC NECK ASSEMBLY 299-M SPACER, DY PLATE, TLH CORRECTION COVER, REAR (KV-27FA310 ONLY) COVER, REAR (KV-29FA310 ONLY) SPEAKER ASSY (29) [22-28] GRILLE, CENTER (W29) LOUDSPEAKER (19.2CMX4.2CM) LOUDSPEAKER (13CM) TOP ASSY (W29), COVER COVER, BOTTOM (W29) CONNECTION CABLE FOOT * * * * * * [ASSEMBLY INCLUDES] 57 KV-27FA310/27FS120/29FA310/29FS120 NOTE: The components identified by shading and Replace only with part number specified. ! NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. mark are critical for safety. 6-4. CHASSIS (KV-27FA310/29FA310 ONLY) 4-388-477-01 7-685-663-71 4-046-765-12 7-685-647-79 SCREW(3X16),TAPPING,+BV WASHER SCREW +BVTP 4X16 TYPE2 IT-3 SCREW, TAPPING 7+CROWN WASHER SCREW +BVTP 3X10 TYPE2 IT-3 51 50 49 52 53 55 54 46 47 48 45 44 56 57 41 42 43 40 REF. NO. * 40 * . . 41 * 42 * 42 * ! ! ! PART NO. DESCRIPTION [ASSEMBLY INCLUDES] HR (VAR) BOARD, MOUNTED HU (VAR) BOARD, MOUNTED A-1302-880-A A BOARD, COMPLETE (KV-27FA310 & KV-29FA310 L. NORTH ONLY) The high-voltage leads associated with the FBT on the A board are not included and must be ordered separately. (See 51-53) A-1302-954-A A BOARD, COMPLETE (KV-29FA310 L. SOUTH ONLY) The high-voltage leads associated with the FBT on the A board are not included and must be ordered separately. (See 51-53) REF. NO. A-1415-629-A ! . A-1415-631-A 43 44 45 46 A-1410-921-A 8-598-593-50 1-766-374-11 1-500-586-11 K BOARD, MOUNTED TUNER, FSS BTF-WA421 PLUG, F-PIN FILTER, CLAMP (FERRITE CORE) (KV-29FA310 L. SOUTH ONLY) 47 1-824-069-11 CORD, AC POWER (WITH CONNECTOR) (KV-27FA310 & KV-29FA310 L. NORTH ONLY) KV-27FA310/27FS120/29FA310/29FS120 * ! ! ! ! * * * * PART NO. DESCRIPTION [ASSEMBLY INCLUDES] 47 1-757-840-12 48 49 50 51 4-087-877-41 1-500-082-11 1-453-310-21 1-251-374-14 CORD, POWER (WITH CONNECTOR) (KV-29FA310 L. SOUTH ONLY) TERMINAL BRACKET CLAMP, SLEEVE FERRITE FBT ASSY NX-4521//X4J4 [51-53] CAP ASSY, HIGH-VOLTAGE 52 53 54 55 56 57 1-900-800-65 1-900-803-22 A-1410-927-A 4-076-951-01 A-1410-925-A A-1410-924-A CONNECTOR ASSY, FOCUS LEAD WIRE ASSY, G2 LEAD GD (COM) BOARD, MOUNTED HINGE, PWB CW BOARD, MOUNTED V BOARD, MOUNTED 58 KV-27FA310/27FS120/29FA310/29FS120 SECTION 7: ELECTRICAL PARTS LIST NOTE: The components identified by shading and ! mark are critical for safety. Replace only with part number specified. The components in this manual identified by the following indicate parts that have been carefully factorysymbol: selected to satisfy regulations regarding X-ray radiation for each set. Should replacement be required for one of these components, replace only with the value originally used. NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. REF. NO. PART NO. * Items marked with an asterisk are not stocked since they are seldom required for routine service. Expect some delay when ordering these components. DESCRIPTION REF. NO. VALUES A * A-1052-931-A A BOARD, COMPLETE (KV-29FS120LS ONLY) A-1302-880-A A BOARD, COMPLETE (KV-27FA310/29FA310LN ONLY) A-1302-954-A A BOARD, COMPLETE (KV-29FA310LS ONLY) A-1302-967-A A BOARD, COMPLETE (KV-27FS120/29FS120LN ONLY) * * * 1-533-223-11 4-374-846-11 4-382-854-11 ! * FUSE HOLDER 0A 0V COVER, CAPACITOR, CAP TYPE SCREW (M3X10), P, SW (+) The high-voltage leads associated with the FBT on the A board are not included and must be ordered separately. Order the following leads when requesting this A Board: 1-251-374-14 1-900-803-22 1-900-800-65 ! ! ! CAP ASSY, HIGH-VOLTAGE WIRE ASSY, G2 LEAD CONNECTOR ASSY, FOCUS LEAD PART NO. A RESISTORS • All resistors are in ohms • F : nonflammable • All variable and adjustable resistors have characteristic curve B, unless otherwise noted. When ordering parts by reference number, please include the board name. DESCRIPTION VALUES C023 C033 C041 C047 C048 1-126-935-11 1-162-970-11 1-126-964-11 1-164-315-11 1-104-665-11 ELECT CERAMIC CHIP ELECT CERAMIC CHIP ELECT 470µF 0.01µF 10µF 470pF 100µF 20% 10% 20% 5% 20% 16V 25V 50V 50V 25V C049 C051 C052 C053 C054 1-126-960-11 1-126-964-11 1-164-230-11 1-165-176-11 1-126-960-11 ELECT ELECT CERAMIC CHIP CERAMIC CHIP ELECT 1µF 10µF 220pF 0.047µF 1µF 20% 20% 5% 10% 20% 50V 50V 50V 16V 50V C056 C057 C064 C074 C075 1-162-966-11 1-107-826-11 1-165-176-11 1-126-964-11 1-126-935-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT ELECT 0.0022µF 0.1µF 0.047µF 10µF 470µF 10% 10% 10% 20% 20% 50V 16V 16V 50V 16V C076 C077 C079 C080 C081 1-104-665-11 1-126-947-11 1-162-968-11 1-128-934-91 1-128-934-91 ELECT ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 100µF 47µF 0.0047µF 0.33µF 0.33µF 20% 20% 10% 20% 20% 25V 35V 50V 10V 10V C090 C091 C092 C094 C095 1-162-970-11 1-126-947-11 1-126-947-11 1-162-970-11 1-126-947-11 CERAMIC CHIP ELECT ELECT CERAMIC CHIP ELECT 0.01µF 47µF 47µF 0.01µF 47µF 10% 20% 20% 10% 20% 25V 35V 35V 25V 35V C096 C097 C098 C099 C100 1-162-970-11 1-126-947-11 1-162-970-11 1-126-947-11 1-126-956-91 CERAMIC CHIP ELECT CERAMIC CHIP ELECT ELECT 0.01µF 47µF 0.01µF 47µF 0.1µF 10% 20% 10% 20% 20% 25V 35V 25V 35V 50V C115 C116 C200 C202 C203 1-164-739-11 1-107-826-11 1-125-891-11 1-125-891-11 1-125-891-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 560pF 0.1µF 0.47µF 0.47µF 0.47µF 5% 10% 10% 10% 10% 50V 16V 10V 10V 10V CAPACITOR C003 C004 C005 C006 C007 1-162-919-11 1-162-923-11 1-162-966-11 1-126-942-61 1-164-315-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP 22pF 47pF 0.0022µF 1000µF 470pF 5% 5% 10% 20% 5% 50V 50V 50V 25V 50V C008 C009 C010 C011 C012 1-126-956-91 1-164-230-11 1-126-960-11 1-162-964-11 1-162-968-11 ELECT CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP 0.1µF 220pF 1µF 0.001µF 0.0047µF 20% 5% 20% 10% 10% 50V 50V 50V 50V 50V C014 C015 C019 C021 C022 1-126-960-11 1-107-826-11 1-126-956-91 1-107-826-11 1-126-964-11 ELECT CERAMIC CHIP ELECT CERAMIC CHIP ELECT 1µF 0.1µF 0.1µF 0.1µF 10µF 20% 10% 20% 10% 20% 50V 16V 50V 16V 50V KV-27FA310/27FS120/29FA310/29FS120 59 KV-27FA310/27FS120/29FA310/29FS120 NOTE: The components identified by shading and ! mark are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION A NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. VALUES REF. NO. C204 C205 C206 C207 C212 1-216-864-11 1-216-864-11 1-126-963-11 1-126-963-11 1-126-963-11 SHORT CHIP SHORT CHIP ELECT ELECT ELECT 4.7µF 4.7µF 4.7µF 20% 20% 20% C213 C220 C301 C302 C303 1-126-963-11 1-125-891-11 1-126-956-91 1-126-956-91 1-126-956-91 ELECT CERAMIC CHIP ELECT ELECT ELECT 4.7µF 0.47µF 0.1µF 0.1µF 0.1µF C304 C305 C306 C307 C313 1-126-956-91 1-107-826-11 1-107-826-11 1-107-826-11 1-126-956-91 ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT C317 C318 C319 C325 C326 1-126-964-11 1-126-964-11 1-126-964-11 1-162-967-11 1-164-505-11 C328 C330 C337 C351 C370 PART NO. DESCRIPTION VALUES 50V 50V 50V C419 C420 C421 C422 C423 1-125-891-11 1-126-960-11 1-126-965-91 1-126-960-11 1-126-963-11 CERAMIC CHIP ELECT ELECT ELECT ELECT 0.47µF 1µF 22µF 1µF 4.7µF 10% 20% 20% 20% 20% 10V 50V 50V 50V 50V 20% 10% 20% 20% 20% 50V 10V 50V 50V 50V C424 C430 C431 C436 C450 1-125-891-11 1-126-963-11 1-126-963-11 1-107-826-11 1-126-943-11 CERAMIC CHIP ELECT ELECT CERAMIC CHIP ELECT 0.47µF 4.7µF 4.7µF 0.1µF 2200µF 10% 20% 20% 10% 20% 10V 50V 50V 16V 25V 0.1µF 0.1µF 0.1µF 0.1µF 0.1µF 20% 10% 10% 10% 20% 50V 16V 16V 16V 50V C451 C452 C457 1-126-959-11 ELECT 0.47µF 1-126-960-11 ELECT 1µF 1-127-715-91 CERAMIC CHIP 0.22µF (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-165-176-11 CERAMIC CHIP 0.047µF (KV-27FA310/29FA310 ONLY) 20% 20% 10% 50V 50V 16V 10% 16V ELECT ELECT ELECT CERAMIC CHIP CERAMIC CHIP 10µF 10µF 10µF 0.0033µF 2.2µF 20% 20% 20% 10% 50V 50V 50V 50V 16V 16V C460 1-127-715-91 CERAMIC CHIP 0.22µF 10% (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-165-176-11 CERAMIC CHIP 0.047µF 10% (KV-27FA310/29FA310 ONLY) 1-126-943-11 ELECT 2200µF 20% 1-162-970-11 1-162-970-11 1-162-919-11 1-164-315-11 1-162-968-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01µF 0.01µF 22pF 470pF 0.0047µF 10% 10% 5% 5% 10% 25V 25V 50V 50V 50V C461 C462 C463 C470 C501 1-126-943-11 1-126-943-11 1-126-943-11 1-126-935-11 1-126-959-11 ELECT ELECT ELECT ELECT ELECT 2200µF 2200µF 2200µF 470µF 0.47µF 20% 20% 20% 20% 20% 25V 25V 25V 16V 50V C390 C400 C401 C402 C403 1-162-970-11 1-128-934-91 1-164-227-11 1-164-174-11 1-162-967-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01µF 0.33µF 0.022µF 0.0082µF 0.0033µF 10% 20% 10% 10% 10% 25V 10V 25V 25V 50V C502 C503 C504 C505 ! C506 1-102-112-00 1-106-383-00 1-102-228-00 1-102-228-00 1-117-214-11 CERAMIC MYLAR CERAMIC CERAMIC CERAMIC 330pF 0.047µF 470pF 470pF 0.001µF 10% 10% 10% 10% 10% 50V 200V 500V 500V 2KV C404 C405 C406 C407 C408 1-162-967-11 1-164-677-11 1-164-677-11 1-162-965-11 1-162-965-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.0033µF 0.033µF 0.033µF 0.0015µF 0.0015µF 10% 10% 10% 10% 10% 50V 16V 16V 50V 50V ! C507 ! C508 C509 ! C510 C511 1-127-717-21 1-129-722-00 1-126-964-11 1-162-116-00 1-109-844-11 FILM FILM ELECT CERAMIC FILM 19000pF 0.047µF 10µF 680pF 0.68µF 3% 5% 20% 10% 5% 1.2KV 630V 50V 2KV 400V C409 C410 C411 C412 C413 1-127-715-91 1-127-715-91 1-128-934-91 1-126-960-11 1-126-963-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT ELECT 0.22µF 0.22µF 0.33µF 1µF 4.7µF 10% 10% 20% 20% 20% 16V 16V 10V 50V 50V C512 ! C513 C514 C515 C516 1-104-987-11 1-106-383-00 1-115-521-11 1-107-649-11 1-117-412-11 MYLAR MYLAR FILM ELECT FILM 0.001µF 0.047µF 0.82µF 2.2µF 0.24µF 5% 10% 5% 20% 5% 200V 200V 250V 250V 250V C414 C415 C416 C418 1-126-961-11 1-126-963-11 1-126-960-11 1-126-963-11 ELECT ELECT ELECT ELECT 2.2µF 4.7µF 1µF 4.7µF 20% 20% 20% 20% 50V 50V 50V 50V C519 C520 C521 1-216-864-11 1-126-965-91 1-126-960-11 SHORT CHIP ELECT ELECT 22µF 1µF 20% 20% 50V 50V KV-27FA310/27FS120/29FA310/29FS120 C457 C458 C458 16V 25V 60 KV-27FA310/27FS120/29FA310/29FS120 NOTE: The components identified by shading and ! mark are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION VALUES REF. NO. C522 C523 C525 C526 C527 1-102-244-00 1-165-529-11 1-164-646-11 1-102-244-00 1-107-645-11 CERAMIC MYLAR CERAMIC CERAMIC ELECT 220pF 0.22µF 2200pF 220pF 22µF 10% 10 10% 10% 20% 500V 275V 500V 500V 200V C529 C534 C536 C537 C539 1-164-690-91 1-162-966-11 1-162-968-11 1-162-964-11 1-162-970-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.0022µF 0.0022µF 0.0047µF 0.001µF 0.01µF 5% 10% 10% 10% 10% 50V 50V 50V 50V 25V C542 C543 0.0022µF 10% .0001µF 50V 50V C544 C545 1-162-966-11 CERAMIC CHIP 1-102-106-00 CERAMIC CHIP (KV-27FA310/29FA310 ONLY) 1-126-967-11 ELECT 1-126-969-11 ELECT 47µF 220µF 20% 20% 50V 50V C546 C549 C550 C551 C552 1-137-194-81 1-101-821-00 1-104-666-11 1-126-960-11 1-126-964-11 FILM CERAMIC ELECT ELECT ELECT 0.47µF 0.0022µF 220µF 1µF 10µF 5% 20% 20% 20% 50V 500V 25V 50V 50V C553 C554 C555 C558 C559 1-107-826-11 1-162-970-11 1-101-821-00 1-162-318-11 1-216-864-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CERAMIC SHORT CHIP 0.1µF 10% 0.01µF 10% 0.0022µF 0.001µF 10% 16V 25V 500V 500V C560 C561 C562 C563 C566 1-216-833-11 1-126-963-11 1-104-666-11 1-162-970-11 1-107-635-11 METAL CHIP ELECT ELECT CERAMIC CHIP ELECT 10K 4.7µF 220µF 0.01µF 4.7µF 5% 20% 20% 10% 20% 1/10W 50V 25V 25V 160V C571 C581 C582 C585 C588 1-104-665-11 1-136-161-00 1-106-387-00 1-104-666-11 1-137-417-11 ELECT FILM MYLAR ELECT MYLAR 100µF 0.047µF 0.068µF 220µF 0.015µF 20% 5% 10% 20% 10% 25V 50V 200V 25V 100V C589 C590 C594 C595 C597 1-128-560-11 1-126-964-11 1-123-024-21 1-104-666-11 1-104-666-11 ELECT ELECT ELECT ELECT ELECT 22µF 10µF 33µF 220µF 220µF 20% 20% 20% 20% 100V 50V 160V 25V 25V C600 C601 1-126-964-11 ELECT 1-117-703-11 CERAMIC (KV-29FS120LS/29FA310LS ONLY) 10µF 20% 0.0047µF 50V 250V ! C602 ! C603 ! C605 C609 C610 PART NO. DESCRIPTION VALUES 10 10 20% 20% 10% 275V 275V 250V 25V 500V C611 C612 C613 C615 C616 1-126-971-11 ELECT 470µF 20% 1-126-961-11 ELECT 2.2µF 20% 1-161-964-91 CERAMIC 0.0047µF 1-161-964-91 CERAMIC 0.0047µF 1-126-943-11 ELECT 2200µF 20% (KV-27FS120/29FS120LN/29FS120LS ONLY) 50V 50V 250V 250V 25V C617 1-107-935-11 ELECT 330µF (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-107-935-11 ELECT 330µF (KV-27FS120/29FS120LN/29FS120LS ONLY) 20% 100V 20% 100V 1-162-970-11 CERAMIC CHIP 0.01µF (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-117-893-11 ELECT 470µF (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-117-894-11 ELECT 560µF (KV-27FA310/29FA310 ONLY) 10% 25V 20% 250V 20% 250V 1-107-636-11 ELECT 10µF (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-126-964-11 ELECT 10µF (KV-27FS120/29FS120LN/29FS120LS ONLY) 20% 160V 20% 50V 1-117-893-11 ELECT 470µF (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-117-894-11 ELECT 560µF (KV-27FA310/29FA310 ONLY) 1-113-896-11 CERAMIC 220pF (KV-27FS120/29FS120LN/29FS120LS ONLY) 20% 250V 20% 250V 10% 250V C618 C620 C621 C621 C624 C625 C629 C629 ! C631 C632 C633 C634 C635 C636 C637 C638 KV-27FA310/27FS120/29FA310/29FS120 A NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. 1-165-529-11 MYLAR 0.22µF 1-165-529-11 MYLAR 0.22µF 1-117-699-11 CERAMIC 0.001µF 1-126-942-61 ELECT 1000µF 1-164-645-11 CERAMIC 1000pF (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-126-967-11 ELECT 47µF 20% (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-136-479-11 FILM 0.001µF 5% (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-126-947-11 ELECT 47µF 20% (KV-27FS120/29FS120LN/29FS120LS ONLY) 50V 1-126-963-11 ELECT 4.7µF (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-127-715-91 CERAMIC CHIP 0.22µF (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-127-715-91 CERAMIC CHIP 0.22µF (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-104-665-11 ELECT 100µF 20% 50V 10% 16V 10% 16V 20% 25V 100V 35V 61 KV-27FA310/27FS120/29FA310/29FS120 NOTE: The components identified by shading and ! mark are critical for safety. Replace only with part number specified. REF. NO. C640 C642 C643 C645 C647 C648 C650 C651 C652 C655 C660 C661 C665 C672 C673 ! C680 C690 C901 PART NO. DESCRIPTION VALUES 1-164-645-11 CERAMIC 1000pF (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-126-969-11 ELECT 220µF (KV-27FS120/29FS120LN/29FS120LS ONLY) REF. NO. 10% 500V 20% 50V 1-130-777-00 MYLAR 0.1µF 5% (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-162-964-11 CERAMIC CHIP 0.001µF 10% (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-126-947-11 ELECT 47µF 20% (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-104-330-91 CERAMIC 470pF (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-126-942-61 ELECT 1000µF (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-126-942-61 ELECT 1000µF (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-104-665-11 ELECT 100µF 1-104-665-11 ELECT 100µF 1-137-756-22 FILM 22000pF (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-126-963-11 ELECT 4.7µF CERAMIC CERAMIC CHIP METAL CHIP * CN002 * CN002 20% 25V * CN003 * * * CN004 CN401 CN404 * CN501 * CN506 1KV 20% 50V 0.001µF 20% 250V 0.01µF 10% 25V 6.8K 0.50% 1/10W 7P 4P 4P 1-564-507-11 PLUG, CONNECTOR (KV-27FS120/29FS120LN/29FS120LS ONLY) 4P 3P 4P 1-580-798-11 CONNECTOR PIN (DY) 1-564-511-11 PLUG, CONNECTOR 1-580-843-11 PIN, CONNECTOR (POWER) 1-580-843-11 PIN, CONNECTOR (POWER) (KV-27FA310/29FA310 ONLY) 6P 8P * CN602 1-564-509-11 PLUG, CONNECTOR (KV-27FA310/29FA310 ONLY) 6P D002 D003 D004 D005 D006 8-719-109-89 8-719-110-17 8-719-110-17 8-719-110-17 8-719-921-44 DIODE DIODE DIODE DIODE DIODE RD5.6ESB2 RD10ESB2 RD10ESB2 RD10ESB2 MTZJ-5.1C D007 D046 D047 D050 D051 8-719-982-22 8-719-109-89 8-719-109-89 8-719-510-02 6-500-175-01 DIODE DIODE DIODE DIODE DIODE MTZJ-30D RD5.6ESB2 RD5.6ESB2 D1NS4 1E3-TB D052 D200 D201 D202 D203 8-719-109-89 8-719-929-15 8-719-929-15 8-719-929-15 8-719-929-15 DIODE DIODE DIODE DIODE DIODE RD5.6ESB2 HZS9.1NB2 HZS9.1NB2 HZS9.1NB2 HZS9.1NB2 D204 D205 D206 D207 D208 8-719-929-15 8-719-929-15 8-719-070-62 8-719-404-50 8-719-929-15 DIODE DIODE DIODE DIODE DIODE HZS9.1NB2 HZS9.1NB2 PDZ9.1B-115 MA111-TX HZS9.1NB2 D209 D230 D231 D232 D234 8-719-404-50 8-719-108-12 8-719-108-12 8-719-108-12 8-719-108-12 DIODE DIODE DIODE DIODE DIODE MA111-TX RD9.1EW RD9.1EW RD9.1EW RD9.1EW D235 D236 D237 D317 D321 8-719-108-12 8-719-108-12 8-719-108-12 8-719-108-12 8-719-110-17 DIODE DIODE DIODE DIODE DIODE RD9.1EW RD9.1EW RD9.1EW RD9.1EW RD10ESB2 D351 D390 D401 D405 8-719-109-66 8-719-404-50 8-719-921-63 8-719-991-33 DIODE DIODE DIODE DIODE RD3.3ESB2 MA111-TX MTZJ-7.5B 1SS133T-77 35V 25V 25V 800V 1-564-510-11 PLUG, CONNECTOR 1-564-507-11 PLUG, CONNECTOR 1-564-507-11 PLUG, CONNECTOR (KV-27FA310/29FA310 ONLY) 1-573-963-11 PIN, CONNECTOR (PC BOARD) KV-27FA310/27FS120/29FA310/29FS120 25V 20% 20% 3% 6P CN515 CN585 CN600 CN601 DIODE 25V 7P VALUES 35V 20% 1-564-510-11 PLUG, CONNECTOR (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-564-509-11 PLUG, CONNECTOR (KV-27FA310/29FA310 ONLY) 1-560-124-00 PLUG, CONNECTOR (2.5MM) DESCRIPTION * * *! * 50V 1KV CONNECTOR PART NO. 100V 10% 1-164-227-11 CERAMIC CHIP 0.022µF 10% (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-104-330-91 CERAMIC 470pF 10% (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-126-947-11 ELECT 47µF 20% 1-117-699-11 1-162-970-11 1-218-712-11 A NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. 62 KV-27FA310/27FS120/29FA310/29FS120 NOTE: The components identified by shading and ! mark are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION VALUES D412 D414 D430 D431 D500 1-216-864-11 8-719-921-63 8-719-929-15 8-719-929-15 8-719-404-50 SHORT CHIP DIODE DIODE DIODE DIODE MTZJ-7.5B HZS9.1NB2 HZS9.1NB2 MA111-TX D501 D505 D506 D507 D508 8-719-404-50 8-719-081-00 8-719-312-10 8-719-991-33 8-719-404-50 DIODE DIODE DIODE DIODE DIODE MA111-TX BY228/A52A/ RU4AM-T3 1SS133T-77 MA111-TX D510 D513 D514 D515 D525 8-719-081-00 8-719-404-50 8-719-908-03 8-719-908-03 8-719-991-33 DIODE DIODE DIODE DIODE DIODE BY228/A52A/ MA111-TX GP08D GP08D 1SS133T-77 D526 D528 D545 D558 D559 8-719-074-25 8-719-991-33 8-719-908-03 8-719-404-50 8-719-404-50 DIODE DIODE DIODE DIODE DIODE PG104R 1SS133T-77 GP08D MA111-TX MA111-TX D562 ! D566 ! D567 ! D568 D569 8-719-991-33 8-719-979-84 8-719-991-33 8-719-921-63 8-719-921-44 DIODE DIODE DIODE DIODE DIODE 1SS133T-77 EGP20DPKG23 1SS133T-77 MTZJ-7.5B MTZJ-5.1C REF. NO. D614 D615 D618 D620 D621 D624 D628 D629 D631 D587 D589 D596 D598 D603 8-719-074-25 8-719-991-33 8-719-979-85 8-719-979-85 8-719-064-12 D604 6-500-890-01 DIODE 1N5406G-EB (KV-27FS120/29FA310LN/29FS120LN ONLY) 8-719-510-53 DIODE D4SB60L (KV-29FS120LS/29FA310LS ONLY) 6-500-890-01 DIODE 1N5406G-EB (KV-27FS120/29FA310LN/29FS120LN ONLY) D605 D606 D611 D612 D613 PG104R 1SS133T-77 EGP20G EGP20G S1NB60-4062 8-719-510-73 DIODE S3L20UF4 (KV-27FS120/29FS120LS/29FS120LN ONLY) 8-719-068-00 DIODE ERC04-06SE (KV-27FS120/29FA310LN/29FS120LN ONLY) 8-719-068-00 DIODE ERC04-06SE (KV-27FS120/29FA310LN/29FS120LN ONLY) KV-27FA310/27FS120/29FA310/29FS120 PART NO. DESCRIPTION VALUES 8-719-057-52 DIODE EZ0150AV1 (KV-27FS120/29FS120LN/29FS120LS ONLY) 6-500-177-01 DIODE MA7D50 (KV-27FS120/29FS120LN/29FS120LS ONLY) 8-719-979-64 DIODE UF4005PKG23 (KV-27FS120/29FS120LN/29FS120LS ONLY) 8-719-911-19 DIODE 1SS119-25 8-719-510-37 DIODE D5LC20U (KV-27FS120/29FS120LN/29FS120LS ONLY) 8-719-510-73 DIODE S3L20UF4 (KV-27FS120/29FS120LN/29FS120LS ONLY) D641 8-719-404-50 DIODE MA111-TX 8-719-110-31 DIODE RD12ESB2 6-500-175-01 DIODE 1E3-TB (KV-27FS120/29FS120LN/29FS120LS ONLY) 8-719-991-33 DIODE 1SS133T-77 D642 D644 D645 D650 8-719-982-22 8-719-110-31 8-719-109-89 8-719-109-89 DIODE DIODE DIODE DIODE MTZJ-30D RD12ESB2 RD5.6ESB2 RD5.6ESB2 FUSE ! F601 ! F601 DIODE DIODE DIODE DIODE DIODE A NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. 1-532-506-51 FUSE 6.3A (KV-29FS120LS/29FA310LS ONLY) 1-576-193-11 FUSE 6.3A (KV-27FS120/29FA310LN/29FS120LN ONLY) 250V 125V FERRITE BEAD FB301 FB505 FB506 FB522 FB601 1-410-397-21 FERRITE 1.1µH 1-410-397-21 FERRITE 1.1µH 1-410-397-21 FERRITE 1.1µH 1-410-397-21 FERRITE 1.1µH 1-410-397-21 FERRITE 1.1µH (KV-27FS120/29FS120LN/29FS120LS ONLY) FB602 1-410-397-21 FERRITE 1.1µH (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-410-397-21 FERRITE 1.1µH (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-410-397-21 FERRITE 1.1µH (KV-27FS120/29FS120LN/29FS120LS ONLY) FB603 FB604 FB605 FB616 1-410-397-21 FERRITE 1.1µH 1-469-578-11 FERRITE 1.1µH (KV-27FS120/29FS120LN/29FS120LS ONLY) 63 KV-27FA310/27FS120/29FA310/29FS120 A REF. NO. FB617 PART NO. DESCRIPTION VALUES 1-469-578-11 FERRITE 1.1µH (KV-27FS120/29FS120LN/29FS120LS ONLY) FILTER FL001 1-239-803-11 ENCAPSULATED COMPONENT IC IC001 IC002 IC003 IC321 IC400 6-804-178-01 IC M65582AUF-XXXFP 6-704-004-01 IC BR24L16F-WE2 8-759-352-91 IC PST9143NL 8-759-353-00 IC NJM2534M(TE2) 6-703-190-01 IC NJW1134AGK1-TE2 (KV-27FS120/29FS120LN/29FS120LS ONLY) IC400 6-706-033-01 IC (KV-27FA310/29FA310 ONLY) 6-705-054-01 IC 8-759-696-71 IC 8-759-700-07 IC IC404 IC545 IC561 IC565 IC600 IC603 IC603 IC604 IC608 IC633 W1172JK1-TE TDA8947J STV9379A NJM2903M 8-759-700-44 IC NJM2902M 6-705-810-01 IC MCZ3001DB (KV-27FS120/29FS120LN/29FS120LS ONLY) 6-705-818-01 IC MC7809CF (KV-27FS120/29FS120LN/29FS120LS ONLY) 6-705-466-01 IC BA90BC0T (KV-27FA310/29FA310 ONLY) 8-749-012-13 IC DM-58 (KV-27FS120/29FS120LN/29FS120LS ONLY) 8-759-450-47 IC BA05T 6-703-080-01 IC LF33CV REF. NO. PART NO. DESCRIPTION VALUES CHIP CONDUCTOR JR2 JR6 JR7 JR12 JR44 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP JR102 JR128 JR201 JR207 JR209 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP JR211 JR212 JR213 JR214 JR215 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP JR216 JR255 JR301 JR302 JR303 1-216-864-11 SHORT CHIP (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-216-864-11 SHORT CHIP 1-216-864-11 SHORT CHIP 1-216-864-11 SHORT CHIP 1-216-864-11 SHORT CHIP JR304 JR305 JR306 JR310 JR311 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP JR312 JR315 JR317 JR401 JR411 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP JR485 JR486 JR504 JR585 JR586 JR1502 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP JACK * J200 J202 J203 J205 1-794-119-11 TERMINAL BLOCK, S 4P 1-794-118-11 JACK BLOCK, PIN 3P 1-817-461-11 PIN JACK BLOCK 5P 1-794-116-11 JACK BLOCK, PIN 2P (KV-27FS120/29FS120LN/29FS120LS ONLY) J205 1-818-352-11 PIN JACK W/ DIN CONNECTOR (KV-27FA310/29FA310 ONLY) JUMPER WIRE JW57 KV-27FA310/27FS120/29FA310/29FS120 1-249-409-11 CARBON 220 5% 1/4W 64 KV-27FA310/27FS120/29FA310/29FS120 NOTE: The components identified by shading and ! mark are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION VALUES REF. NO. COIL L002 L003 L004 L005 L006 1-239-803-11 1-239-803-11 1-239-803-11 1-239-803-11 1-414-273-11 ENCAPSULATED COMPONENT ENCAPSULATED COMPONENT ENCAPSULATED COMPONENT ENCAPSULATED COMPONENT INDUCTOR 100µH L007 L008 L009 L010 L011 1-414-273-11 1-414-857-11 1-414-857-11 1-414-267-21 1-239-803-11 INDUCTOR 100µH INDUCTOR 100µH INDUCTOR 100µH INDUCTOR 10µH ENCAPSULATED COMPONENT L101 L513 L515 L516 L525 1-414-229-11 1-406-677-11 1-412-552-11 1-419-714-11 1-409-955-31 FERRITE INDUCTOR INDUCTOR INDUCTOR INDUCTOR L527 ! L588 L606 L607 L608 L608 L609 0µH 10MH 2.2MH 100µH 8MH 1-410-397-21 FERRITE 1.1µH 1-412-523-41 INDUCTOR 6.8µH 1-412-525-31 INDUCTOR 10µH (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-412-525-31 INDUCTOR 10µH (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-412-533-21 INDUCTOR 47µH (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-410-397-21 INDUCTOR 1.1µH (KV-27FA310/29FA310 ONLY) 1-412-525-31 INDUCTOR 10µH 8-749-010-64 PHOTO COUPLER PC123F2 (KV-27FS120/29FS120LN/29FS120LS ONLY) PS401 1-576-337-21 IC LINK 2.7A DESCRIPTION VALUES 8-729-422-27 8-729-422-27 8-729-424-02 8-729-424-02 8-729-424-02 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SD601A-Q 2SD601A-Q 2SB709A-QRS-TX 2SB709A-QRS-TX 2SB709A-QRS-TX Q305 Q306 Q316 Q390 Q391 8-729-424-02 8-729-424-02 8-729-422-27 8-729-422-27 8-729-422-27 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SB709A-QRS-TX 2SB709A-QRS-TX 2SD601A-Q 2SD601A-Q 2SD601A-Q Q400 Q401 Q404 Q411 Q412 8-729-422-27 8-729-422-27 8-729-422-27 8-729-422-27 8-729-422-27 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SD601A-Q 2SD601A-Q 2SD601A-Q 2SD601A-Q 2SD601A-Q Q501 Q502 Q503 Q504 Q505 8-729-423-33 8-729-140-50 8-729-424-02 8-729-422-27 6-550-107-01 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SC3311A-QRSTA 2SC3209LK 2SB709A-QRS-TX 2SD601A-Q 2SD2645-YB Q521 Q522 Q531 Q533 Q572 8-729-423-33 8-729-053-87 8-729-422-27 8-729-424-02 8-729-422-27 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SC3311A-QRSTA KTC4370A 2SD601A-Q 2SB709A-QRS-TX 2SD601A-Q Q573 Q578 Q590 Q600 8-729-424-02 TRANSISTOR 2SB709A-QRS-TX 8-729-422-27 TRANSISTOR 2SD601A-Q 6-550-362-01 TRANSISTOR KTA1279 8-729-053-36 TRANSISTOR 2SK2640-01MR-F122 (KV-27FS120/29FS120LN/29FS120LS ONLY) Q601 8-729-053-36 TRANSISTOR 2SK2640-01MR-F122 (KV-27FS120/29FS120LN/29FS120LS ONLY) 8-729-424-02 TRANSISTOR 2SB709A-QRS-TX 8-729-922-37 TRANSISTOR 2SD2144S-UVW 6-550-409-01 TRANSISTOR KSC2383-O Q604 Q608 Q650 IC LINK PART NO. Q009 Q300 Q301 Q303 Q304 PHOTO COUPLER ! PH602 A NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. 50V RESISTOR TRANSISTOR Q002 Q004 Q005 Q006 Q008 8-729-422-27 8-729-422-27 8-729-424-02 8-729-422-27 8-729-422-27 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR KV-27FA310/27FS120/29FA310/29FS120 2SD601A-Q 2SD601A-Q 2SB709A-QRS-TX 2SD601A-Q 2SD601A-Q R002 R003 R004 R005 R006 1-216-864-11 1-216-821-11 1-216-817-11 1-400-427-21 1-216-829-11 SHORT CHIP METAL CHIP METAL CHIP FERRITE METAL CHIP 1K 470 0µH 4.7K 5% 5% 1/10W 1/10W 5% 1/10W 65 KV-27FA310/27FS120/29FA310/29FS120 A REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION R007 R015 R027 R028 R029 1-400-427-21 1-216-833-11 1-218-732-11 1-249-409-11 1-249-409-11 FERRITE METAL CHIP METAL CHIP CARBON CARBON 0µH 10K 47K 220 220 5% 0.50% 5% 5% 1/10W 1/10W 1/4W 1/4W R085 R086 R087 R088 R090 1-216-864-11 1-216-821-11 1-247-807-31 1-216-864-11 1-216-837-11 SHORT CHIP METAL CHIP CARBON SHORT CHIP METAL CHIP R030 R031 R032 R033 R035 1-249-409-11 1-216-813-11 1-216-813-11 1-249-409-11 1-216-809-11 CARBON METAL CHIP METAL CHIP CARBON METAL CHIP 220 220 220 220 100 5% 5% 5% 5% 5% 1/4W 1/10W 1/10W 1/4W 1/10W R091 R092 R093 R094 R095 1-216-841-11 1-216-825-11 1-216-841-11 1-414-229-11 1-216-813-11 R037 R038 R039 R040 R041 1-216-833-11 1-216-821-11 1-216-815-11 1-216-829-11 1-216-829-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 10K 1K 330 4.7K 4.7K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R096 R098 R101 R102 R103 R042 R043 R044 R045 R047 1-216-813-11 1-216-813-11 1-216-829-11 1-216-829-11 1-249-409-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP CARBON 220 220 4.7K 4.7K 220 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/4W R048 R049 R050 R051 R052 1-216-829-11 1-216-829-11 1-249-425-11 1-249-417-11 1-216-813-11 METAL CHIP METAL CHIP CARBON CARBON METAL CHIP 4.7K 4.7K 4.7K 1K 220 5% 5% 5% 5% 5% R053 R054 R055 R056 R057 1-249-433-11 1-249-433-11 1-216-829-11 1-216-833-11 1-249-417-11 CARBON CARBON METAL CHIP METAL CHIP CARBON 22K 22K 4.7K 10K 1K R058 R059 R060 R061 R062 1-249-429-11 1-249-417-11 1-249-409-11 1-249-429-11 1-249-413-11 CARBON CARBON CARBON CARBON CARBON R063 R070 R072 R076 R080 1-216-829-11 1-249-409-11 1-249-425-11 1-247-807-31 1-216-833-11 R081 R082 R083 R084 1-216-841-11 1-216-857-11 1-216-847-11 1-216-819-11 VALUES 1K 100 5% 5% 1/10W 1/4W 22K 5% 1/10W METAL CHIP METAL CHIP METAL CHIP FERRITE METAL CHIP 47K 2.2K 47K 0µH 220 5% 5% 5% 1/10W 1/10W 1/10W 5% 1/10W 1-216-829-11 1-216-839-11 1-216-829-11 1-216-837-11 1-216-833-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 4.7K 33K 4.7K 22K 10K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R105 R107 R108 R109 R110 1-216-864-11 1-414-229-11 1-414-229-11 1-216-829-11 1-249-409-11 SHORT CHIP FERRITE FERRITE METAL CHIP CARBON 0µH 0µH 4.7K 220 5% 5% 1/10W 1/4W 1/10W 1/10W 1/4W 1/4W 1/10W R111 R112 R115 R116 R200 1-216-829-11 1-249-425-11 1-216-817-11 1-216-853-11 1-216-813-11 METAL CHIP CARBON METAL CHIP METAL CHIP METAL CHIP 4.7K 4.7K 470 470K 220 5% 5% 5% 5% 5% 1/10W 1/4W 1/10W 1/10W 1/10W 5% 5% 5% 5% 5% 1/4W 1/4W 1/10W 1/10W 1/4W R202 R203 R210 R211 R212 1-216-845-11 1-216-845-11 1-216-845-11 1-249-409-11 1-249-409-11 METAL CHIP METAL CHIP METAL CHIP CARBON CARBON 100K 100K 100K 220 220 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/4W 1/4W 10K 1K 220 10K 470 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R213 R215 R216 R217 R218 1-216-845-11 1-216-853-11 1-216-853-11 1-249-409-11 1-216-813-11 METAL CHIP METAL CHIP METAL CHIP CARBON METAL CHIP 100K 470K 470K 220 220 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/4W 1/10W METAL CHIP CARBON CARBON CARBON METAL CHIP 4.7K 220 4.7K 100 10K 5% 5% 5% 5% 5% 1/10W 1/4W 1/4W 1/4W 1/10W R220 R221 R222 R227 R229 1-216-813-11 1-249-409-11 1-249-409-11 1-218-285-11 1-218-285-11 METAL CHIP CARBON CARBON METAL CHIP METAL CHIP 220 220 220 75 75 5% 5% 5% 5% 5% 1/10W 1/4W 1/4W 1/10W 1/10W METAL CHIP METAL CHIP METAL CHIP METAL CHIP 47K 1M 150K 680 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W R230 R250 R251 R303 1-218-285-11 1-216-821-11 1-216-821-11 1-216-863-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP 75 1K 1K 3.3M 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W KV-27FA310/27FS120/29FA310/29FS120 66 KV-27FA310/27FS120/29FA310/29FS120 A REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R305 R308 R309 R310 R311 1-218-285-11 1-216-821-11 1-216-833-11 1-216-821-11 1-216-813-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 75 1K 10K 1K 220 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R405 R406 R407 R408 R409 1-216-833-11 1-216-813-11 1-216-813-11 1-216-864-11 1-216-864-11 METAL CHIP METAL CHIP METAL CHIP SHORT CHIP SHORT CHIP 10K 220 220 5% 5% 5% 1/10W 1/10W 1/10W R312 R313 R314 R315 R316 1-218-867-11 1-216-864-11 1-216-833-11 1-216-813-11 1-216-825-11 METAL CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP 6.8K 0.50% 1/10W 10K 220 2.2K 5% 5% 5% 1/10W 1/10W 1/10W R410 R411 R415 1-216-833-11 METAL CHIP 1-216-833-11 METAL CHIP 1-216-809-11 METAL CHIP (KV-27FA310/29FA310 ONLY) 1-216-809-11 METAL CHIP (KV-27FA310/29FA310 ONLY) 10K 10K 100 5% 5% 5% 1/10W 1/10W 1/10W 100 5% 1/10W R317 R318 R319 R320 R321 1-216-813-11 1-216-825-11 1-216-813-11 1-216-825-11 1-247-807-31 METAL CHIP METAL CHIP METAL CHIP METAL CHIP CARBON 220 2.2K 220 2.2K 100 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/4W R322 R323 R324 R325 R326 1-218-684-11 1-215-415-00 1-216-821-11 1-216-864-11 1-400-427-21 METAL CHIP METAL METAL CHIP SHORT CHIP FERRITE 470 560 1K 0.50% 1/10W 1% 1/4W 5% 1/10W R328 R330 R335 R337 R338 1-400-427-21 1-218-285-11 1-216-813-11 1-216-801-11 1-216-864-11 FERRITE METAL CHIP METAL CHIP METAL CHIP SHORT CHIP 0µH 75 220 22 5% 5% 5% 1/10W 1/10W 1/10W R339 R351 R352 R363 R364 1-216-813-11 1-216-829-11 1-216-853-11 1-218-285-11 1-218-285-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 220 4.7K 470K 75 75 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R370 R371 R372 R382 R390 1-216-825-11 1-216-849-11 1-216-827-11 1-216-863-11 1-216-864-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP 2.2K 220K 3.3K 3.3M 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W R391 R392 R393 R394 R400 1-216-829-11 1-216-818-11 1-216-825-11 1-216-833-11 1-216-829-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 4.7K 560 2.2K 10K 4.7K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R401 R402 R403 R404 1-216-809-11 1-216-864-11 1-216-809-11 1-216-825-11 METAL CHIP SHORT CHIP METAL CHIP METAL CHIP 100 5% 1/10W 100 2.2K 5% 5% 1/10W 1/10W KV-27FA310/27FS120/29FA310/29FS120 0µH R418 R419 R421 1-216-864-11 SHORT CHIP (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-216-864-11 SHORT CHIP (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-216-864-11 SHORT CHIP R422 R427 R429 R430 R431 1-216-833-11 1-216-841-11 1-216-841-11 1-216-845-11 1-216-845-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 10K 47K 47K 100K 100K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R433 R434 R442 R450 R477 1-216-809-11 1-216-864-11 1-216-809-11 1-249-425-11 1-216-819-11 METAL CHIP SHORT CHIP METAL CHIP CARBON METAL CHIP 100 5% 1/10W 100 4.7K 680 5% 5% 5% 1/10W 1/4W 1/10W R478 R479 R499 R501 R502 1-216-833-11 1-216-821-11 1-216-845-11 1-249-411-11 1-249-425-11 METAL CHIP METAL CHIP METAL CHIP CARBON CARBON 10K 1K 100K 330 4.7K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/4W 1/4W R503 R504 R507 R510 R513 1-215-919-11 1-249-425-11 1-216-833-11 1-260-328-11 1-215-908-00 METAL OXIDE CARBON METAL CHIP CARBON METAL OXIDE 2.2K 4.7K 10K 1K 33 5% 5% 5% 5% 5% 3W 1/4W 1/10W 1/2W 3W R514 R515 R517 R520 R521 1-215-910-00 1-215-882-00 1-216-839-11 1-216-833-11 1-216-819-11 METAL OXIDE METAL OXIDE METAL CHIP METAL CHIP METAL CHIP 68 22 33K 10K 680 5% 5% 5% 5% 5% 3W 2W 1/10W 1/10W 1/10W R522 R524 R525 1-249-411-11 1-218-867-11 1-215-884-11 CARBON METAL CHIP METAL OXIDE 330 6.8K 47 5% 1/4W 0.50% 1/10W 5% 2W R420 67 KV-27FA310/27FS120/29FA310/29FS120 NOTE: The components identified by shading and ! mark are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION A A component identified by this symbol indicates that it has been carefully factory-selected to satisfy regulations regarding X-ray radiation. Should replacement be required, replace only with the value originally used. VALUES REF. NO. PART NO. DESCRIPTION VALUES R526 R527 R528 R529 R530 1-218-724-11 1-216-825-11 1-216-816-11 1-218-720-11 1-218-865-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 22K 2.2K 390 15K 5.6K 0.50% 5% 5% 0.50% 0.50% 1/10W 1/10W 1/10W 1/10W 1/10W R583 R584 R585 R586 R587 1-249-377-11 1-215-451-00 1-215-447-00 1-218-855-11 1-249-401-11 CARBON METAL METAL METAL CHIP CARBON 0.47 18K 12K 2.2K 47 5% 1% 1% 0.50% 5% 1/4W 1/4W 1/4W 1/10W 1/4W R533 R534 R535 R536 R537 1-218-712-11 1-218-720-11 1-218-865-11 1-216-833-11 1-216-855-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 6.8K 15K 5.6K 10K 680K 0.50% 0.50% 0.50% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R588 R589 R590 R591 R592 1-215-882-00 1-247-895-91 1-249-429-11 1-216-363-00 1-249-441-11 METAL OXIDE CARBON CARBON METAL OXIDE CARBON 22 470K 10K 0.33 100K 5% 5% 5% 5% 5% 2W 1/4W 1/4W 2W 1/4W R539 R540 R542 R543 R544 1-216-864-11 1-249-429-11 1-215-445-00 1-216-368-11 1-249-389-11 SHORT CHIP CARBON METAL METAL OXIDE CARBON 10K 10K 0.82 4.7 5% 1% 5% 5% 1/4W 1/4W 2W 1/4W R593 R594 R595 R596 R597 1-249-429-11 1-249-418-11 1-247-895-91 1-249-377-11 1-216-849-11 CARBON CARBON CARBON CARBON METAL CHIP 10K 1.2K 470K 0.47 220K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/10W R545 R546 R547 R548 R549 1-215-890-11 1-249-385-11 1-215-445-00 1-218-720-11 1-216-841-11 METAL OXIDE CARBON METAL METAL CHIP METAL CHIP 470 2.2 10K 15K 47K 5% 5% 1% 0.50% 5% 2W 1/4W 1/4W 1/10W 1/10W R598 R601 1-249-377-11 CARBON 0.47 1-240-262-11 CEMENTED 0.68 (KV-27FS120/29FA310LN/29FS120LN ONLY) 1-202-968-11 CEMENTED 1.2 (KV-29FS120LS/29FA310LS ONLY) 5% 5% 1/4W 10W 5% 10W R550 R551 R553 R554 R555 1-216-817-11 1-216-829-11 1-216-821-11 1-216-827-11 1-216-833-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 470 4.7K 1K 3.3K 10K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R602 1-240-262-11 CEMENTED 0.68 (KV-27FS120/29FA310LN/29FS120LN ONLY) 1-202-968-11 CEMENTED 1.2 (KV-29FS120LS/29FA310LS ONLY) 1-219-513-11 METAL 4.7M (KV-27FS120/29FA310LN/29FS120LN ONLY) 5% 10W 5% 10W 5% 1/2W R556 R557 R560 R561 R562 1-216-825-11 1-216-825-11 1-216-821-11 1-216-833-11 1-249-429-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP CARBON 2.2K 2.2K 1K 10K 10K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/4W 1-218-871-11 1-218-730-11 1-218-716-11 1-215-469-00 1-215-927-00 METAL CHIP METAL CHIP METAL CHIP METAL METAL OXIDE 10K 39K 10K 100K 47K 0.50% 0.50% 0.50% 1% 5% 1/10W 1/10W 1/10W 1/4W 3W R568 R569 R570 R572 R573 1-215-399-00 1-249-429-11 1-218-716-11 1-216-829-11 1-216-829-11 METAL CARBON METAL CHIP METAL CHIP METAL CHIP 120 10K 10K 4.7K 4.7K 1% 5% 0.50% 5% 5% 1/4W 1/4W 1/10W 1/10W 1/10W R574 R575 R578 R581 1-216-833-11 1-249-389-11 1-249-429-11 1-249-441-11 METAL CHIP CARBON CARBON CARBON 10K 4.7 10K 100K 5% 5% 5% 5% 1/10W 1/4W 1/4W 1/4W R563 !XR564 ! R565 ! R566 R567 KV-27FA310/27FS120/29FA310/29FS120 R601 R602 ! R603 R604 R605 R606 R607 R608 1-216-821-11 1-216-833-11 1-216-833-11 1-216-857-11 1-215-924-00 1K 10K 10K 1M 15K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 3W R609 R611 1-202-962-11 CEMENTED 3.3 1-240-262-11 CEMENTED 0.68 (KV-27FS120/29FA310LN/29FS120LN ONLY) 1-202-968-11 CEMENTED 1.2 (KV-29FS120LS/29FA310LS ONLY) 5% 5% 10W 10W 5% 10W 1-260-131-11 CEMENTED 470K (KV-29FS120LS/29FA310LS ONLY) 1-240-262-11 CEMENTED 0.68 (KV-27FS120/29FA310LN/29FS120LN ONLY) 5% 1/2W 5% 10W 1-202-968-11 CEMENTED (KV-29FS120LS/29FA310LS ONLY) 1-216-825-11 METAL CHIP 1.2 5% 10W 2.2K 5% 1/10W R611 R612 R613 R613 R614 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL OXIDE 68 KV-27FA310/27FS120/29FA310/29FS120 NOTE: The components identified by shading and ! mark are critical for safety. Replace only with part number specified. REF. NO. R615 R616 R617 R619 R620 R625 R626 R627 R628 R629 R630 R631 R632 R634 R640 R641 R641 R647 R650 R651 R652 R658 R659 R660 PART NO. DESCRIPTION A NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. VALUES 1-202-933-61 FUSIBLE 0.1 (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-216-821-11 METAL CHIP 1K (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-216-821-11 METAL CHIP 1K (KV-27FS120/29FS120LN/29FS120LS ONLY) REF. NO. 10% 1/2W R667 5% 1/10W R668 5% 1/10W R670 1-249-389-11 CARBON 4.7 (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-216-353-00 METAL OXIDE 2.2 1-249-413-11 CARBON 470 (KV-27FS120/29FS120LN/29FS120LS ONLY) 5% 1/4W R671 5% 5% 1W 1/4W R680 R687 1-218-716-11 METAL CHIP 10K (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-215-481-00 METAL 330K (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-260-131-11 CEMENTED 470K (KV-29FS120LS/29FA310LS ONLY) 0.50% 1/10W DESCRIPTION VALUES 1-216-833-11 METAL CHIP 10K (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-249-418-11 CARBON 1.2K (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-216-833-11 METAL CHIP 10K (KV-27FS120/29FS120LN/29FS120LS ONLY) 5% 1/10W 5% 1/4W 5% 1/10W 1-243-979-71 METAL OXIDE 0.1 (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-216-864-11 SHORT CHIP 1-202-968-11 CEMENTED 1.2 (KV-29FS120LS/29FA310LS ONLY) 5% 2W 5% 10W 5% 10W 5% 1W 0.50% 1/10W 1% 1/4W ! R699 5% 1/2W R801 1-240-262-11 CEMENTED 0.68 (KV-27FS120/29FA310LN/29FS120LN ONLY) 1-218-265-11 METAL CHIP 8.2M (KV-29FS120LS/29FA310LS ONLY) 1-218-716-11 METAL CHIP 10K 1-215-481-00 METAL 330K (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-215-481-00 METAL 330K (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-218-718-11 METAL CHIP 12K (KV-27FS120/29FS120LN/29FS120LS ONLY) 1% 1/4W 1% 1/4W R802 R803 R812 R813 R814 1-218-714-11 1-218-719-11 1-218-716-11 1-218-716-11 1-218-736-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 8.2K 13K 10K 10K 68K 0.50% 0.50% 0.50% 0.50% 0.50% 1/10W 1/10W 1/10W 1/10W 1/10W 1-216-809-11 METAL CHIP 100 (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-215-905-11 METAL OXIDE 10 1-249-417-11 CARBON 1K (KV-27FS120/29FS120LN/29FS120LS ONLY) 5% 1/10W 5% 5% 3W 1/4W R815 R850 ! R851 R852 R862 1-218-732-11 1-215-453-00 1-216-821-11 1-218-889-11 1-216-813-11 METAL CHIP METAL METAL CHIP METAL CHIP METAL CHIP 47K 22K 1K 56K 220 0.50% 1% 5% 0.50% 5% 1/10W 1/4W 1/10W 1/10W 1/10W 1/10W 10W METAL CHIP SHORT CHIP METAL CHIP 5% 5% 1-216-843-11 1-216-864-11 1-218-714-11 68K 1-202-968-11 CEMENTED 1.2 (KV-29FS120LS/29FA310LS ONLY) 1-240-262-11 CEMENTED 0.68 (KV-27FS120/29FA310LN/29FS120LN ONLY) 1-216-811-11 METAL CHIP 150 (KV-27FS120/29FS120LN/29FS120LS ONLY) R890 R893 R901 8.2K 0.50% 1/10W 5% 10W 5% 1/10W 0.50% 1/10W RELAY RY501 ! RY600 1-249-415-11 CARBON 680 1-249-441-11 CARBON 100K (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-249-441-11 CARBON 100K (KV-27FS120/29FS120LN/29FS120LS ONLY) 5% 5% 1/4W 1/4W 5% 1/4W 1-249-393-11 CARBON 10 (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-249-393-11 CARBON 10 (KV-27FS120/29FS120LN/29FS120LS ONLY) 1-216-833-11 METAL CHIP 10K (KV-27FS120/29FS120LN/29FS120LS ONLY) 5% 1/4W KV-27FA310/27FS120/29FA310/29FS120 R687 PART NO. 1-755-198-11 1-755-395-11 RELAY, AC POWER RELAY (AC POWER) SWITCH SW515 1-572-707-11 SWITCH, LEVER TRANSFORMER 5% 1/4W 5% 1/10W T505 ! T510 ! T511 1-433-836-11 1-437-610-11 1-433-850-11 TRANSFORMER, HORIZONTAL DRIVE TRANSFORMER, FERRITE (PMT) TRANSFORMER, HORIZONTAL LINEAR 69 KV-27FA310/27FS120/29FA310/29FS120 NOTE: The components identified by shading and ! mark are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION VALUES ! T585 ! T601 ! T602 1-453-310-21 FBT ASSY NX-4521//X4J4 1-435-617-11 TRANSFORMER, LINE FILTER 1-435-675-11 TRANSFORMER, STANDBY (KV-27FS120/29FA310LN/29FS120LN ONLY) ! T602 1-435-676-11 TRANSFORMER, STANDBY (KV-29FS120LS/29FA310LS ONLY) 1-439-898-21 CONVERTER TRANSFORMER (KV-27FS120/29FS120LN/29FS120LS ONLY) ! T603 REF. NO. THERMISTOR ! THP501 1-804-313-11 THERMISTOR, PTC (KV-27FS120/29FA310LN/29FS120LN ONLY) 1-803-540-11 THERMISTOR, PTC (KV-29FS120LS/29FA310LS ONLY) ! THP501 TUNER ! TU101 8-598-593-50 A CW NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. TUNER, FSS BTF-WA421 PART NO. DESCRIPTION VALUES C2777 C2778 C3701 C3702 C3703 1-126-963-11 1-126-947-11 1-126-947-11 1-136-497-81 1-126-947-11 ELECT ELECT ELECT FILM ELECT 4.7µF 47µF 47µF 0.1µF 47µF 20% 20% 20% 5% 20% 50V 35V 35V 50V 35V C3708 C3780 C3781 C3782 C3901 1-136-497-81 1-162-926-11 1-162-926-11 1-162-926-11 1-107-667-11 FILM CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT 0.1µF 82pF 82pF 82pF 2.2µF 5% 5% 5% 5% 20% 50V 50V 50V 50V 400V C3902 C3903 C3904 C3905 C3906 1-107-364-11 1-126-935-11 1-130-471-00 1-107-364-11 1-130-471-00 MYLAR ELECT MYLAR MYLAR MYLAR 0.01µF 470µF 0.001µF 0.01µF 0.001µF 10% 20% 5% 10% 5% 200V 16V 50V 200V 50V C3907 C3908 C3909 C3910 C3911 1-107-638-11 1-126-935-11 1-104-999-11 1-104-999-11 1-104-665-11 ELECT ELECT MYLAR MYLAR ELECT 33µF 470µF 0.1µF 0.1µF 100µF 20% 20% 5% 5% 20% 160V 16V 200V 200V 25V C3912 C3913 C3914 C3915 C3930 C3931 1-126-935-11 1-126-933-11 1-130-491-00 1-162-970-11 1-104-655-91 1-104-655-91 ELECT ELECT MYLAR CERAMIC CHIP ELECT ELECT 470µF 100µF 0.047µF 0.01µF 470µF 470µF 20% 20% 5% 10% 20% 20% 16V 16V 50V 25V 6.3V 6.3V VARISTOR ! VDR600 1-810-974-21 VARISTOR (KV-27FS120/29FA310LN/29FS120LN ONLY) 1-803-967-11 VARISTOR (KV-29FS120LS/29FA310LS ONLY) ! VDR600 CRYSTAL X001 X301 1-795-006-21 1-781-377-21 CONNECTOR VIBRATOR, CRYSTAL VIBRATOR, CRYSTAL * CW * A-1410-925-A CW BOARD, MOUNTED 4-382-854-11 SCREW (M3X10), P, SW (+) * CN2707 CN2752 CN2753 CN2755 CN3903 1-564-506-11 1-564-512-11 1-785-879-11 1-695-915-11 1-564-506-11 PLUG, CONNECTOR 3P PLUG, CONNECTOR 9P CONNECTOR, ONE TOUCH TAB (CONTACT) PLUG, CONNECTOR 3P DIODE CAPACITOR C2751 C2752 C2753 C2754 C2755 1-107-652-11 1-162-114-00 1-137-528-11 1-102-074-00 1-107-651-11 ELECT CERAMIC MYLAR CERAMIC ELECT 10µF 0.0047µF 0.1µF 0.001µF 4.7µF 20% 10% 10% 20% 250V 2KV 250V 50V 250V C2774 C2775 1-126-960-11 1-126-935-11 ELECT ELECT 1µF 470µF 20% 20% 50V 16V KV-27FA310/27FS120/29FA310/29FS120 D2701 D2754 D2755 D2756 D2758 8-719-108-12 8-719-901-83 8-719-901-83 8-719-901-83 8-719-074-25 DIODE DIODE DIODE DIODE DIODE RD9.1EW 1SS83 1SS83 1SS83 PG104R D3762 D3763 D3772 8-719-404-50 8-719-404-50 8-719-404-50 DIODE DIODE DIODE MA111-TX MA111-TX MA111-TX 70 KV-27FA310/27FS120/29FA310/29FS120 NOTE: The components identified by shading and ! mark are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION CW NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. VALUES REF. NO. PART NO. DESCRIPTION VALUES D3773 D3782 D3783 D3901 D3902 8-719-404-50 8-719-404-50 8-719-404-50 8-719-110-86 8-719-110-86 DIODE DIODE DIODE DIODE DIODE MA111-TX MA111-TX MA111-TX RD39ESB RD39ESB Q3762 Q3763 Q3771 Q3772 Q3773 8-729-422-27 8-729-422-27 8-729-422-27 8-729-422-27 8-729-422-27 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SD601A-Q 2SD601A-Q 2SD601A-Q 2SD601A-Q 2SD601A-Q D3903 D3905 D3906 D3907 D3908 8-719-991-33 8-719-510-02 8-719-404-50 8-719-404-50 8-719-404-50 DIODE DIODE DIODE DIODE DIODE 1SS133T-77 D1NS4 MA111-TX MA111-TX MA111-TX Q3781 Q3782 Q3783 Q3901 Q3902 8-729-422-27 8-729-422-27 8-729-422-27 8-729-053-87 6-550-247-01 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SD601A-Q 2SD601A-Q 2SD601A-Q KTC4370A KTA1659A Q3903 Q3904 Q3905 Q3906 Q3907 Q3908 8-729-422-27 8-729-422-27 8-729-424-02 8-729-120-28 8-729-120-28 8-729-424-02 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SD601A-Q 2SD601A-Q 2SB709A-QRS-TX 2SC1623-L5L6 2SC1623-L5L6 2SB709A-QRS-TX FERRITE BEAD FB3700 FB3701 FB3702 FB3703 1-410-397-21 1-410-397-21 1-410-397-21 1-410-397-21 FERRITE FERRITE FERRITE FERRITE 1.1µH 1.1µH 1.1µH 1.1µH RESISTOR IC IC2751 IC3701 8-759-562-43 8-759-803-42 IC IC TDA6108JF/N1B LA6500-FA R2756 R2757 R2758 R2760 R2761 1-260-328-11 1-260-328-11 1-260-328-11 1-260-087-11 1-216-375-00 CARBON CARBON CARBON CARBON METAL OXIDE 1K 1K 1K 100 3.3 5% 5% 5% 5% 5% 1/2W 1/2W 1/2W 1/2W 2W R2762 R2763 R2764 R2765 R2766 1-216-375-00 1-247-807-31 1-247-807-31 1-247-807-31 1-247-807-31 METAL OXIDE CARBON CARBON CARBON CARBON 3.3 100 100 100 100 5% 5% 5% 5% 5% 2W 1/4W 1/4W 1/4W 1/4W R2767 R2768 R2770 R2785 R2788 1-247-807-31 1-247-807-31 1-260-132-11 1-249-399-11 1-249-421-11 CARBON CARBON CARBON CARBON CARBON 100 100 560K 33 2.2K 5% 5% 5% 5% 5% 1/4W 1/4W 1/2W 1/4W 1/4W R2789 R3700 R3701 R3702 R3704 1-249-425-11 1-249-433-11 1-216-833-11 1-216-813-11 1-249-419-11 CARBON CARBON METAL CHIP METAL CHIP CARBON 4.7K 22K 10K 220 1.5K 5% 5% 5% 5% 5% 1/4W 1/4W 1/10W 1/10W 1/4W R3705 R3706 R3707 R3710 R3711 1-216-833-11 1-249-381-11 1-249-383-11 1-216-821-11 1-218-692-11 METAL CHIP CARBON CARBON METAL CHIP METAL CHIP 10K 1 1.5 1K 1K 5% 5% 5% 5% 0.50% 1/10W 1/4W 1/4W 1/10W 1/10W JACK ! J2751 1-451-544-11 SOCKET, CRT CHIP CONDUCTOR JR3910 1-216-864-11 SHORT CHIP COIL L2751 L3710 L3711 L3712 L3901 1-408-613-31 1-410-387-11 1-410-387-11 1-410-387-11 1-412-528-11 INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR 68µH 33µH 33µH 33µH 18µH TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SD601A-Q 2SB709A-QRS-TX 2SD601A-Q 2SD601A-Q 2SD601A-Q TRANSISTOR Q2772 Q3710 Q3711 Q3712 Q3761 8-729-422-27 8-729-424-02 8-729-422-27 8-729-422-27 8-729-422-27 KV-27FA310/27FS120/29FA310/29FS120 71 KV-27FA310/27FS120/29FA310/29FS120 NOTE: The components identified by shading and ! mark are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION CW D NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. VALUES REF. NO. PART NO. DESCRIPTION VALUES R3712 R3713 R3714 R3719 R3760 1-218-690-11 1-216-824-11 1-216-821-11 1-215-888-00 1-216-829-11 METAL CHIP METAL CHIP METAL CHIP METAL OXIDE METAL CHIP 820 1.8K 1K 220 4.7K 0.50% 5% 5% 5% 5% 1/10W 1/10W 1/10W 2W 1/10W R3914 R3915 R3916 R3917 R3918 1-216-820-11 1-216-829-11 1-216-864-11 1-216-829-11 1-216-805-11 METAL CHIP METAL CHIP SHORT CHIP METAL CHIP METAL CHIP 820 4.7K 5% 5% 1/10W 1/10W 4.7K 47 5% 5% 1/10W 1/10W R3762 R3763 R3764 R3765 R3766 1-218-692-11 1-216-835-11 1-218-678-11 1-218-700-11 1-216-827-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 1K 15K 270 2.2K 3.3K 0.50% 5% 0.50% 0.50% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R3919 R3921 R3922 R3923 R3930 1-216-805-11 1-216-833-11 1-249-397-11 1-249-401-11 1-216-864-11 METAL CHIP METAL CHIP CARBON CARBON SHORT CHIP 47 10K 22 47 5% 5% 5% 5% 1/10W 1/10W 1/4W 1/4W R3767 R3768 R3769 R3770 R3771 1-216-830-11 1-216-821-11 1-216-821-11 1-216-829-11 1-216-821-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 5.6K 1K 1K 4.7K 1K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R3931 R3932 R3933 R3935 R3938 1-249-421-11 1-218-696-11 1-216-864-11 1-249-405-11 1-216-864-11 CARBON METAL CHIP SHORT CHIP CARBON SHORT CHIP 2.2K 1.5K 5% 1/4W 0.50% 1/10W 100 5% 1/4W R3772 R3773 R3774 R3775 R3776 1-218-692-11 1-216-835-11 1-218-678-11 1-218-700-11 1-216-827-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 1K 15K 270 2.2K 3.3K 0.50% 5% 0.50% 0.50% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R3777 R3778 R3779 R3780 R3782 1-216-830-11 1-216-821-11 1-216-821-11 1-216-829-11 1-218-692-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 5.6K 1K 1K 4.7K 1K 5% 5% 5% 5% 0.50% 1/10W 1/10W 1/10W 1/10W 1/10W R3783 R3784 R3785 R3786 R3787 1-216-835-11 1-218-678-11 1-218-700-11 1-216-827-11 1-216-830-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 15K 270 2.2K 3.3K 5.6K 5% 0.50% 0.50% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R3788 R3901 R3902 R3903 R3904 1-216-821-11 1-249-405-11 1-249-385-11 1-249-414-11 1-249-432-11 METAL CHIP CARBON CARBON CARBON CARBON 1K 100 2.2 560 18K 5% 5% 5% 5% 5% 1/10W 1/4W 1/4W 1/4W 1/4W 5% 10% 5% 10% 10% 20% 630V 500V 630V 500V 500V 160V R3905 R3906 R3907 R3908 R3909 1-249-421-11 1-249-432-11 1-249-385-11 1-249-414-11 1-260-316-51 CARBON CARBON CARBON CARBON CARBON 2.2K 18K 2.2 560 100 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/2W R3910 R3911 R3912 R3913 1-215-915-11 1-216-812-11 1-216-811-11 1-216-806-11 METAL OXIDE METAL CHIP METAL CHIP METAL CHIP 470 180 150 56 5% 5% 5% 5% 3W 1/10W 1/10W 1/10W KV-27FA310/27FS120/29FA310/29FS120 VARIABLE RESISTOR RV2701 ! RV2750 1-238-019-11 1-241-656-11 RES, ADJ, CARBON 47K RES, ADJ, METAL FILM 110M D * A-1415-635-A D BOARD, MOUNTED (ALL EXCEPT KV-27FA310/29FA310) ! 1-900-807-96 WIRE ASSY, G2 LEAD 180 CAPACITOR C1815 C1816 C1817 C1818 C1819 C1820 1-129-718-00 1-102-244-00 1-129-709-91 1-164-645-11 1-102-244-00 1-109-954-11 FILM CERAMIC FILM CERAMIC CERAMIC ELECT 0.022µF 220pF 0.0039µF 1000pF 220pF 0.47µF DIODE DIODE DIODE DIODE RD15ESB2 ERA38-06 ERA38-06 1N4937/23 DIODE D1809 D1810 D1811 D1812 8-719-110-41 8-719-970-87 8-719-970-87 8-719-081-93 72 KV-27FA310/27FS120/29FA310/29FS120 NOTE: The components identified by shading and ! mark are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION VALUES REF. NO. COIL L1805 1-406-677-11 D GD NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. INDUCTOR 10MH TRANSISTOR 2SC3840(3) PART NO. DESCRIPTION VALUES C1643 C1645 C1647 C1648 C1649 1-136-165-00 1-136-479-11 1-126-947-11 1-164-143-11 1-164-143-11 FILM FILM ELECT CERAMIC CERAMIC 0.1µF 0.001µF 47µF 0.001µF 0.001µF 5% 5% 20% 10% 10% 50V 100V 35V 1KV 1KV C1650 C1652 C1669 C1670 C1672 1-100-120-51 1-137-374-11 1-164-625-11 1-164-625-11 1-165-953-11 ELECT MYLAR CERAMIC CERAMIC FILM 1000µF 0.047µF 680pF 680pF 47000pF 20% 5% 10% 10% 3% 35V 50V 500V 500V 800V C1680 C1815 C1816 C1817 C1818 1-117-228-71 1-129-718-00 1-102-244-00 1-129-709-91 1-164-645-11 MYLAR FILM CERAMIC FILM CERAMIC 2.2µF 0.022µF 220pF 0.0039µF 1000pF 10% 5% 10% 5% 10% 450V 630V 500V 630V 500V C1819 C1820 1-102-244-00 1-109-954-11 CERAMIC ELECT 220pF 0.47µF 10% 20% 500V 160V TRANSISTOR Q1810 8-729-043-95 RESISTOR R1845 R1846 R1847 R1848 R1849 1-249-441-11 1-249-441-11 1-249-441-11 1-215-894-11 1-215-923-00 CARBON CARBON CARBON METAL OXIDE METAL OXIDE 100K 100K 100K 2.2K 10K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 2W 3W R1850 R1851 R1852 1-215-923-00 1-215-922-11 1-215-922-11 METAL OXIDE METAL OXIDE METAL OXIDE 10K 6.8K 6.8K 5% 5% 5% 3W 3W 3W CONNECTOR TRANSFORMER T1801 1-433-533-12 * TRANSFORMER, FERRITE (DFT) CN1600 GD 1-580-843-11 PIN, CONNECTOR (POWER) DIODE * A-1410-927-A GD (COM) BOARD, MOUNTED (KV-27FA310/29FA310 ONLY) ! 1-900-807-96 4-382-854-11 WIRE ASSY, G2 LEAD 180 SCREW (M3X10), P, SW (+) CAPACITOR C1602 C1604 C1609 C1616 C1617 1-137-150-11 1-164-625-11 1-164-625-11 1-126-943-11 1-123-024-21 FILM CERAMIC CERAMIC ELECT ELECT 0.01µF 680pF 680pF 2200µF 33µF 5% 10% 10% 20% C1620 C1624 C1633 C1634 C1635 1-137-150-11 1-107-636-11 1-136-479-11 1-126-964-11 1-126-963-11 FILM ELECT FILM ELECT ELECT 0.01µF 10µF 0.001µF 10µF 4.7µF 5% 20% 5% 20% 20% 100V 160V 100V 50V 50V C1637 C1642 1-136-165-00 1-126-969-11 FILM ELECT 0.1µF 220µF 5% 20% 50V 50V KV-27FA310/27FS120/29FA310/29FS120 100V 500V 500V 25V 160V D1611 D1614 D1615 D1618 D1621 8-719-062-40 8-719-057-52 8-719-062-40 8-719-979-64 6-500-181-01 DIODE DIODE DIODE DIODE DIODE D4SBL20µF3 EZ0150AV1 D4SBL20µF3 µF4005PKG23 MA6D50 D1631 D1809 D1810 D1811 D1812 6-500-175-01 8-719-110-41 8-719-970-87 8-719-970-87 8-719-081-93 DIODE DIODE DIODE DIODE DIODE 1E3-TB RD15ESB2 ERA38-06 ERA38-06 1N4937/23 FERRITE FERRITE FERRITE FERRITE FERRITE 1.1µH 1.1µH 1.1µH 1.1µH 1.1µH FERRITE BEAD FB1602 FB1604 FB1609 FB1616 FB1617 1-410-397-21 1-410-397-21 1-410-397-21 1-410-397-21 1-410-397-21 73 KV-27FA310/27FS120/29FA310/29FS120 NOTE: The components identified by shading and ! mark are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION VALUES REF. NO. IC IC1600 IC1601 6-705-810-01 8-749-012-13 IC IC MCZ3001DB DM-58 COIL L1600 L1604 L1608 L1805 1-406-977-21 1-412-525-31 1-412-529-81 1-406-677-11 INDUCTOR INDUCTOR INDUCTOR INDUCTOR 100µH 10µH 22µH 10MH PHOTO COUPLER PH1602 8-749-924-35 PHOTO COUPLER ON3171-R 1-576-337-21 8-729-052-32 8-729-052-32 8-729-043-95 DESCRIPTION VALUES 1-249-429-11 1-249-429-11 1-249-418-11 1-249-429-11 1-243-979-71 CARBON CARBON CARBON CARBON METAL OXIDE 10K 10K 1.2K 10K 0.1 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 2W R1672 R1845 R1846 R1847 R1848 1-243-979-71 1-249-441-11 1-249-441-11 1-249-441-11 1-215-894-11 METAL OXIDE CARBON CARBON CARBON METAL OXIDE 0.1 100K 100K 100K 2.2K 5% 5% 5% 5% 5% 2W 1/4W 1/4W 1/4W 2W R1849 R1850 R1851 R1852 1-215-923-00 1-215-923-00 1-215-922-11 1-215-922-11 METAL OXIDE METAL OXIDE METAL OXIDE METAL OXIDE 10K 10K 6.8K 6.8K 5% 5% 5% 5% 3W 3W 3W 3W 20% 25V TRANSFORMER IC LINK 2.7A TRANSISTOR TRANSISTOR TRANSISTOR IRFIB7N50A-LF31 IRFIB7N50A-LF31 2SC3840(3) ! T1604 T1801 50V TRANSISTOR Q1600 Q1601 Q1810 PART NO. R1660 R1667 R1668 R1670 R1671 IC LINK PS1401 GD HR NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. HR * 1-437-606-12 1-433-533-12 COVERTER TRANSFORMER TRANSFORMER, FERRITE (DFT) A-1415-629-A HR (VAR) BOARD, MOUNTED (KV-27FA310/29FA310 ONLY) CAPACITOR RESISTOR ! R1615 R1616 R1617 R1619 R1620 1-202-933-61 1-249-418-11 1-249-417-11 1-249-377-11 1-215-857-71 FUSIBLE CARBON CARBON CARBON METAL OXIDE 0.1 1.2K 1K 0.47 10 10% 5% 5% 5% 5% 1/2W 1/4W 1/4W 1/4W 1W R1625 R1626 R1629 R1630 R1631 1-249-413-11 1-215-443-00 1-245-478-21 1-245-478-21 1-215-449-00 CARBON METAL METAL METAL METAL 470 8.2K 470K 470K 15K 5% 1% 1% 1% 1% 1/4W 1/4W 1/4W 1/4W 1/4W R1632 R1640 R1647 R1650 R1651 1-215-397-00 1-249-417-11 1-215-396-00 1-249-441-11 1-249-441-11 METAL CARBON METAL CARBON CARBON 100 1K 91 100K 100K 1% 5% 1% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R1658 R1659 1-249-393-11 1-249-393-11 CARBON CARBON 10 10 5% 5% 1/4W 1/4W C3001 ELECT 100µF PLUG, CONNECTOR 6P DIODE DIODE RD5.6ESB2 LNJ801LPDJA HYB IC SBX3071-71 CONNECTOR * KV-27FA310/27FS120/29FA310/29FS120 1-104-665-11 CN3001 1-564-521-11 DIODE D3001 D3002 8-719-109-89 8-719-057-09 IC IC3001 8-742-211-20 74 KV-27FA310/27FS120/29FA310/29FS120 HR HS HU REF. NO. PART NO. DESCRIPTION VALUES REF. NO. RESISTOR R3001 R3014 1-249-417-11 1-247-807-31 CARBON CARBON 1K 100 5% 5% 1/4W 1/4W SWITCH S3006 1-786-338-12 SWITCH, TACTILE HS * ELECT ELECT ELECT 100µF 1µF 1µF VALUES 1-249-421-11 1-249-416-11 1-249-415-11 1-249-419-11 1-249-421-11 CARBON CARBON CARBON CARBON CARBON 2.2K 820 680 1.5K 2.2K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R1203 R1234 R1235 R1236 R1237 R1238 1-249-427-11 1-247-804-11 1-249-409-11 1-249-441-11 1-249-409-11 1-249-441-11 CARBON CARBON CARBON CARBON CARBON CARBON 6.8K 75 220 100K 220 100K 5% 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 5% 5% 50V 50V SWITCH CAPACITOR 1-104-665-11 1-126-960-11 1-126-960-11 DESCRIPTION R1009 R1010 R1011 R1201 R1202 A-1415-674-A HS BOARD, MOUNTED (ALL EXCEPT KV-27FA310/29FA310) C1001 C1234 C1235 PART NO. 20% 20% 20% 25V 50V 50V DIODE D1001 D1002 D1003 D1004 D1005 8-719-929-15 8-719-070-80 8-719-929-15 8-719-109-89 8-719-109-89 DIODE DIODE DIODE DIODE DIODE HZS9.1NB2 LNK0120022G HZS9.1NB2 RD5.6ESB2 RD5.6ESB2 D1233 D1235 D1236 8-719-108-12 8-719-108-12 8-719-108-12 DIODE DIODE DIODE RD9.1EW RD9.1EW RD9.1EW S1001 S1002 S1003 S1004 S1005 1-692-431-21 1-692-431-21 1-692-431-21 1-692-431-21 1-692-431-21 SWITCH, TACTILE SWITCH, TACTILE SWITCH, TACTILE SWITCH, TACTILE SWITCH, TACTILE S1006 S1007 S1008 1-692-431-21 1-762-816-11 1-762-816-11 SWITCH, TACTILE SWITCH, TACTILE SWITCH, TACTILE HU * A-1415-631-A HU (VAR) BOARD, MOUNTED (KV-27FA310/29FA310 ONLY) CAPACITOR C2234 C2235 8-742-212-20 HYB IC D301 D2235 D2236 D2240 D2241 SBX3081-71 JACK J1231 1-794-048-11 1-249-417-11 1-247-807-31 1-249-427-11 0.47µF 0.47µF 8-719-108-12 8-719-108-12 8-719-108-12 8-719-110-17 8-719-110-17 DIODE DIODE DIODE DIODE DIODE RD9.1EW RD9.1EW RD9.1EW RD10ESB2 RD10ESB2 JACK, PIN 3P JACK RESISTOR R1004 R1007 R1008 FILM FILM DIODE IC IC1001 1-137-194-81 1-137-194-81 CARBON CARBON CARBON KV-27FA310/27FS120/29FA310/29FS120 1K 100 6.8K 5% 5% 5% 1/4W 1/4W 1/4W J2231 1-794-048-11 JACK, PIN 3P 75 KV-27FA310/27FS120/29FA310/29FS120 HU K REF. NO. PART NO. DESCRIPTION VALUES REF. NO. RESISTOR R1001 R1002 R1003 R2008 R2009 1-249-427-11 1-249-421-11 1-249-419-11 1-249-427-11 1-249-421-11 CARBON CARBON CARBON CARBON CARBON 6.8K 2.2K 1.5K 6.8K 2.2K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R2010 R2011 R2235 R2236 R2237 1-249-416-11 1-249-415-11 1-249-409-11 1-249-441-11 1-249-409-11 CARBON CARBON CARBON CARBON CARBON 820 680 220 100K 220 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R2238 R2240 1-249-441-11 1-247-804-11 CARBON CARBON 100K 75 5% 5% 1/4W 1/4W SWITCH S1007 S1008 S2001 S2002 S2003 1-762-816-11 1-762-816-11 1-692-431-21 1-692-431-21 1-692-431-21 SWITCH, TACTILE SWITCH, TACTILE SWITCH, TACTILE SWITCH, TACTILE SWITCH, TACTILE S2004 S2005 1-692-431-21 1-692-431-21 SWITCH, TACTILE SWITCH, TACTILE K * A-1410-921-A K BOARD, MOUNTED (KV-27FA310/29FA310 ONLY) 4-382-854-11 SCREW (M3X10), P, SW (+) CAPACITOR C2401 C2402 C2403 C2404 C2405 1-130-495-00 1-130-495-00 1-126-964-11 1-162-968-11 1-126-965-91 MYLAR MYLAR ELECT CERAMIC CHIP ELECT 0.1µF 0.1µF 10µF 0.0047µF 22µF 5% 5% 20% 10% 20% 50V 50V 50V 50V 50V C2406 C2407 C2408 C2410 C2411 1-126-964-11 1-126-964-11 1-162-969-11 1-126-969-11 1-126-965-91 ELECT ELECT CERAMIC CHIP ELECT ELECT 10µF 10µF 0.0068µF 220µF 22µF 20% 20% 10% 20% 20% 50V 50V 25V 50V 50V C2412 C2413 1-137-194-81 1-100-120-51 FILM ELECT 0.47µF 1000µF 5% 20% 50V 35V KV-27FA310/27FS120/29FA310/29FS120 PART NO. DESCRIPTION VALUES C2414 C2415 C2416 C2417 C2418 1-126-963-11 1-126-967-11 1-164-172-11 1-162-968-11 1-125-891-11 ELECT ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 4.7µF 47µF 0.0056µF 0.0047µF 0.47µF 20% 20% 10% 10% 10% 50V 50V 25V 50V 10V C2419 C2420 C2421 C2422 C2423 1-127-715-91 1-126-959-11 1-126-959-11 1-127-715-91 1-165-176-11 CERAMIC CHIP ELECT ELECT CERAMIC CHIP CERAMIC CHIP 0.22µF 0.47µF 0.47µF 0.22µF 0.047µF 10% 20% 20% 10% 10% 16V 50V 50V 16V 16V C2424 C2425 C2426 C2427 C2428 1-162-969-11 1-107-826-11 1-162-927-11 1-126-947-11 1-126-943-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT ELECT 0.0068µF 0.1µF 100pF 47µF 2200µF 10% 10% 5% 20% 20% 25V 16V 50V 35V 25V C2429 C2430 C2431 C2432 C2433 1-107-826-11 1-126-960-11 1-126-963-11 1-126-963-11 1-127-715-91 CERAMIC CHIP ELECT ELECT ELECT CERAMIC CHIP 0.1µF 1µF 4.7µF 4.7µF 0.22µF 10% 20% 20% 20% 10% 16V 50V 50V 50V 16V C2434 C2435 C2436 C2437 C2438 1-107-826-11 1-107-826-11 1-107-826-11 1-107-826-11 1-164-227-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1µF 0.1µF 0.1µF 0.1µF 0.022µF 10% 10% 10% 10% 10% 16V 16V 16V 16V 25V C2439 C2440 C2441 C2442 C2443 1-164-227-11 1-107-826-11 1-115-412-11 1-165-176-11 1-115-412-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.022µF 0.1µF 680pF 0.047µF 680pF 10% 10% 5% 10% 5% 25V 16V 25V 16V 25V C2444 C2445 C2446 C2447 C2448 1-165-176-11 1-126-965-91 1-130-495-00 1-130-495-00 1-137-190-91 CERAMIC CHIP ELECT MYLAR MYLAR FILM 0.047µF 22µF 0.1µF 0.1µF 0.22µF 10% 20% 5% 5% 5% 16V 50V 50V 50V 50V C2449 C2450 C2451 C2452 C2453 1-165-176-11 1-126-963-11 1-162-967-11 1-164-677-11 1-162-968-11 CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.047µF 4.7µF 0.0033µF 0.033µF 0.0047µF 10% 20% 10% 10% 10% 16V 50V 50V 16V 50V C2454 C2455 C2456 C2457 1-107-826-11 1-107-826-11 1-126-963-11 1-126-963-11 CERAMIC CHIP CERAMIC CHIP ELECT ELECT 0.1µF 0.1µF 4.7µF 4.7µF 10% 10% 20% 20% 16V 16V 50V 50V 76 KV-27FA310/27FS120/29FA310/29FS120 K REF. NO. C2458 C2459 C2460 C2461 C2462 C2463 PART NO. 1-126-963-11 1-126-965-91 1-137-194-81 1-126-963-11 1-126-963-11 1-107-826-11 DESCRIPTION ELECT ELECT FILM ELECT ELECT CERAMIC CHIP VALUES 4.7µF 22µF 0.47µF 4.7µF 4.7µF 0.1µF REF. NO. 20% 20% 5% 20% 20% 10% 50V 50V 50V 50V 50V 16V PART NO. DESCRIPTION VALUES DIODE D2400 D2401 8-719-404-50 8-719-070-60 DIODE DIODE MA111-TX PDZ7.5B-115 IC IC IC IC IC TDA8947J UPC4558G2 NJW1164M-TE2 NJM2177AFG1 NJM2180M (TE2) IC C2464 C2465 C2466 C2467 C2468 1-126-960-11 1-107-826-11 1-162-968-11 1-164-677-11 1-162-967-11 ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 1µF 0.1µF 0.0047µF 0.033µF 0.0033µF 20% 10% 10% 10% 10% 50V 16V 50V 16V 50V C2469 C2470 C2471 C2472 C2473 1-130-495-00 1-162-968-11 1-162-968-11 1-162-970-11 1-126-964-11 MYLAR CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT 0.1µF 0.0047µF 0.0047µF 0.01µF 10µF 5% 10% 10% 10% 20% 50V 50V 50V 25V 50V C2474 C2475 C2476 C2477 C2478 1-126-964-11 1-126-968-11 1-162-970-11 1-107-826-11 1-162-968-11 ELECT ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 10µF 100µF 0.01µF 0.1µF 0.0047µF 20% 20% 10% 10% 10% 50V 50V 25V 16V 50V C2479 C2480 C2481 C2482 C2484 1-107-826-11 1-107-826-11 1-162-968-11 1-107-826-11 1-130-495-00 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP MYLAR 0.1µF 0.1µF 0.0047µF 0.1µF 0.1µF 10% 10% 10% 10% 5% 16V 16V 50V 16V 50V C2485 C2486 C2487 C2488 C2489 C2490 C2493 C2494 C2495 C2496 C2499 1-130-495-00 1-162-970-11 1-127-715-91 1-162-968-11 1-127-715-91 1-104-665-11 1-126-935-11 1-126-935-11 1-126-935-11 1-126-935-11 1-164-315-11 MYLAR CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT ELECT ELECT ELECT ELECT CERAMIC CHIP 0.1µF 0.01µF 0.22µF 0.0047µF 0.22µF 100µF 470µF 470µF 470µF 470µF 470pF CONNECTOR * * CN2401 CN2402 1-564-510-11 1-564-508-11 PLUG, CONNECTOR PLUG, CONNECTOR KV-27FA310/27FS120/29FA310/29FS120 7P 5P 5% 10% 10% 10% 10% 20% 20% 20% 20% 20% 5% 50V 25V 16V 50V 16V 25V 16V 16V 16V 16V 50V IC2401 IC2402 IC2403 IC2404 IC2405 6-705-054-01 8-759-100-96 6-706-034-01 8-759-165-01 8-759-686-15 CHIP CONDUCTOR JR2401 JR2402 JR2410 JR2411 JR2420 JR2421 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP IC LINK PS2401 1-576-337-21 IC LINK 2.7A 50V TRANSISTOR Q2400 Q2401 Q2410 Q2411 Q2412 8-729-120-28 8-729-120-28 8-729-424-02 8-729-424-02 8-729-424-02 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SC1623-L5L6 2SC1623-L5L6 2SB709A-QRS-TX 2SB709A-QRS-TX 2SB709A-QRS-TX Q2413 Q2414 Q2418 Q2419 8-729-424-02 8-729-422-27 8-729-120-28 8-729-120-28 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SB709A-QRS-TX 2SD601A-Q 2SC1623-L5L6 2SC1623-L5L6 RESISTOR R2401 R2402 R2403 R2404 R2405 1-216-845-11 1-216-833-11 1-216-829-11 1-216-835-11 1-218-895-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 100K 10K 4.7K 15K 100K 5% 5% 5% 5% 0.50% 1/10W 1/10W 1/10W 1/10W 1/10W R2406 R2407 1-218-714-11 1-216-835-11 METAL CHIP METAL CHIP 8.2K 15K 0.50% 1/10W 5% 1/10W 77 KV-27FA310/27FS120/29FA310/29FS120 K REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R2408 R2409 R2410 R2411 R2412 1-218-868-11 1-216-833-11 1-216-835-11 1-216-841-11 1-218-868-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 7.5K 10K 15K 47K 7.5K 0.50% 5% 5% 5% 0.50% 1/10W 1/10W 1/10W 1/10W 1/10W R2454 R2455 R2456 R2457 R2458 1-216-821-11 1-216-809-11 1-216-809-11 1-216-864-11 1-216-861-11 METAL CHIP METAL CHIP METAL CHIP SHORT CHIP METAL CHIP 1K 100 100 5% 5% 5% 1/10W 1/10W 1/10W 2.2M 5% 1/10W R2413 R2414 R2415 R2416 R2417 1-216-841-11 1-216-835-11 1-220-397-11 1-216-837-11 1-216-837-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 47K 15K 4.7M 22K 22K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R2459 R2460 R2461 R2462 R2463 1-216-853-11 1-218-714-11 1-216-839-11 1-218-296-11 1-216-823-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 470K 8.2K 33K 75K 1.5K 5% 0.50% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R2418 R2419 R2420 R2421 R2422 1-216-809-11 1-216-809-11 1-216-837-11 1-216-837-11 1-216-833-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 100 100 22K 22K 10K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R2464 R2465 R2466 R2467 R2468 1-218-331-11 1-216-824-11 1-218-866-11 1-216-833-11 1-216-833-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 51K 1.8K 6.2K 10K 10K 5% 5% 0.50% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R2423 R2424 R2425 R2426 R2427 1-216-840-11 1-216-840-11 1-216-840-11 1-216-817-11 1-216-817-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 39K 39K 39K 470 470 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R2469 R2470 R2471 R2472 R2473 1-216-833-11 1-216-840-11 1-216-824-11 1-218-331-11 1-216-861-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 10K 39K 1.8K 51K 2.2M 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R2428 R2429 R2430 R2431 R2432 1-216-829-11 1-216-829-11 1-216-809-11 1-216-809-11 1-216-864-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP 4.7K 4.7K 100 100 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W R2474 R2475 R2476 R2477 R2478 1-216-839-11 1-218-296-11 1-216-835-11 1-216-835-11 1-216-845-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 33K 75K 15K 15K 100K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R2433 R2434 R2435 R2436 R2437 1-216-833-11 1-218-895-11 1-216-833-11 1-216-821-11 1-216-833-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 10K 100K 10K 1K 10K 5% 0.50% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R2479 R2480 R2481 R2482 R2483 1-216-845-11 1-218-331-11 1-216-823-11 1-216-833-11 1-216-837-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 100K 51K 1.5K 10K 22K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R2438 R2439 R2440 R2441 R2442 1-216-833-11 1-216-833-11 1-216-837-11 1-216-833-11 1-216-821-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 10K 10K 22K 10K 1K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R2484 R2485 R2486 R2487 R2488 1-216-828-11 1-216-821-11 1-216-821-11 1-218-717-11 1-216-825-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 3.9K 1K 1K 11K 2.2K 5% 5% 5% 0.50% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R2443 R2446 R2447 R2448 R2449 1-216-841-11 1-216-833-11 1-216-821-11 1-216-845-11 1-216-841-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 47K 10K 1K 100K 47K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R2489 R2490 R2491 R2492 R2493 1-216-835-11 1-216-845-11 1-216-845-11 1-216-837-11 1-216-845-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 15K 100K 100K 22K 100K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R2450 R2451 R2452 R2453 1-216-833-11 1-216-845-11 1-216-821-11 1-216-841-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP 10K 100K 1K 47K 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W R2494 R2495 R2496 R2497 1-216-845-11 1-218-292-11 1-216-847-11 1-216-823-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP 100K 20K 150K 1.5K 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W KV-27FA310/27FS120/29FA310/29FS120 78 KV-27FA310/27FS120/29FA310/29FS120 K V REF. NO. PART NO. DESCRIPTION VALUES REF. NO. R2498 R2499 R2500 R2501 R2502 1-216-837-11 1-216-837-11 1-216-829-11 1-216-837-11 1-216-837-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 22K 22K 4.7K 22K 22K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R2503 R2504 R2505 R2507 R2519 1-216-837-11 1-216-837-11 1-216-841-11 1-216-809-11 1-216-821-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 22K 22K 47K 100 1K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R2520 R2521 R2522 R2523 R2524 1-216-821-11 1-216-833-11 1-216-841-11 1-216-841-11 1-216-864-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP 1K 10K 47K 47K 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W PART NO. DESCRIPTION VALUES DIODE D2801 D2802 D2804 D2805 D2806 8-719-109-89 8-719-991-33 8-719-302-43 8-719-991-33 8-719-991-33 DIODE DIODE DIODE DIODE DIODE RD5.6ESB2 1SS133T-77 EL1Z 1SS133T-77 1SS133T-77 D2807 D2808 D2813 8-719-210-21 8-719-991-33 8-719-991-33 DIODE DIODE DIODE 11EQS04 1SS133T-77 1SS133T-77 IC UPC5023CS-184 INDUCTOR INDUCTOR INDUCTOR 10MH 10MH 22µH IC IC2801 6-701-598-01 COIL V * L2801 L2802 L2803 A-1410-924-A 1-406-989-21 1-419-633-11 1-412-529-11 V BOARD, MOUNTED TRANSISTOR CAPACITOR C2801 C2802 C2803 C2804 C2805 1-128-578-11 1-126-964-11 1-137-378-11 1-137-378-11 1-129-745-61 ELECT ELECT MYLAR MYLAR FILM 1µF 10µF 0.22µF 0.22µF 0.033µF 20% 20% 5% 5% 5% 100V 50V 50V 50V 400V C2808 C2809 C2810 C2811 C2812 1-162-970-11 1-128-934-91 1-130-495-00 1-129-725-00 1-162-970-11 CERAMIC CHIP CERAMIC CHIP MYLAR FILM CERAMIC CHIP 0.01µF 0.33µF 0.1µF 0.082µF 0.01µF 10% 20% 5% 5% 10% 25V 10V 50V 400V 25V C2813 C2821 C2823 C2824 C2826 C2862 1-126-933-11 1-162-970-11 1-130-967-00 1-165-176-11 1-162-927-11 1-126-964-11 ELECT CERAMIC CHIP FILM CERAMIC CHIP CERAMIC CHIP ELECT 100µF 0.01µF 0.0027µF 0.047µF 100pF 10µF 20% 10% 5% 10% 5% 20% 16V 25V 50V 16V 50V 50V CONNECTOR * * * CN2901 CN2902 CN2903 1-564-507-11 1-770-723-11 1-564-506-11 PLUG, CONNECTOR 4P CONNECTOR, BOARD TO BOARD 8P PLUG, CONNECTOR 3P KV-27FA310/27FS120/29FA310/29FS120 Q2801 Q2802 Q2803 Q2804 Q2805 8-729-422-27 8-729-424-02 8-729-424-02 8-729-424-02 6-550-106-01 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SD601A-Q 2SB709A-QRS-TX 2SB709A-QRS-TX 2SB709A-QRS-TX KTB764 Q2807 Q2808 Q2812 8-729-931-45 6-550-106-01 8-729-026-39 TRANSISTOR TRANSISTOR TRANSISTOR IRF614 KTB764 2SA933AS-QT RESISTOR R2800 R2801 R2802 R2803 R2804 1-216-837-11 1-216-841-11 1-216-833-11 1-216-837-11 1-216-833-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 22K 47K 10K 22K 10K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R2805 R2807 R2808 R2809 R2811 1-216-829-11 1-216-827-11 1-216-833-11 1-216-837-11 1-249-393-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP CARBON 4.7K 3.3K 10K 22K 10 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/4W 79 KV-27FA310/27FS120/29FA310/29FS120 V REF. NO. PART NO. DESCRIPTION VALUES REF. NO. R2815 R2817 R2818 R2819 R2820 1-215-862-11 1-218-736-11 1-216-809-11 1-216-841-11 1-218-883-11 METAL OXIDE METAL CHIP METAL CHIP METAL CHIP METAL CHIP 68 68K 100 47K 33K 5% 0.50% 5% 5% 0.50% 1W 1/10W 1/10W 1/10W 1/10W R2821 R2824 R2825 R2826 R2827 1-218-714-11 1-218-740-11 1-216-845-11 1-249-421-11 1-218-708-11 METAL CHIP METAL CHIP METAL CHIP CARBON METAL CHIP 8.2K 100K 100K 2.2K 4.7K 0.50% 0.50% 5% 5% 0.50% 1/10W 1/10W 1/10W 1/4W 1/10W R2828 R2829 R2833 R2834 R2837 1-218-728-11 1-216-853-11 1-218-710-11 1-218-704-11 1-218-871-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 33K 470K 5.6K 3.3K 10K 0.50% 5% 0.50% 0.50% 0.50% 1/10W 1/10W 1/10W 1/10W 1/10W R2840 R2841 R2842 R2855 R2856 1-218-702-11 1-218-706-11 1-218-700-11 1-218-706-11 1-218-871-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 2.7K 3.9K 2.2K 3.9K 10K 0.50% 0.50% 0.50% 0.50% 0.50% 1/10W 1/10W 1/10W 1/10W 1/10W R2857 R2860 R2864 R2866 R2870 1-218-875-11 1-218-716-11 1-218-668-11 1-249-438-11 1-216-825-11 METAL CHIP METAL CHIP METAL CHIP CARBON METAL CHIP 15K 10K 100 56K 2.2K 0.50% 0.50% 0.50% 5% 5% 1/10W 1/10W 1/10W 1/4W 1/10W R2876 R2890 R2893 1-216-821-11 1-218-728-11 1-216-839-11 METAL CHIP METAL CHIP METAL CHIP 1K 33K 33K 5% 1/10W 0.50% 1/10W 5% 1/10W PART NO. DESCRIPTION VALUES ACCESSORIES AND PACKING * 4-041-259-05 * 2-190-595-01 CARTON, INDIVIDUAL (KV-27FA310 ONLY) 4-102-073-01 CARTON, INDIVIDUAL (KV-/29FA310 ONLY) 4-103-469-01 CARTON, INDIVIDUAL (KV-27FS120 ONLY) 4-103-471-01 CARTON, INDIVIDUAL (KV-29FS120 ONLY) * * * * * * * * BAG, PROTECTION 4-088-874-01 CUSHION, LOWER (KV-27FS120/29FS120 ONLY) 4-102-075-01 CUSHION, LOWER (KV-27FA310/29FA310 ONLY) 4-088-875-01 CUSHION, UPPER (KV-27FS120/29FS120 ONLY) 4-102-074-01 CUSHION, UPPER (KV-27FA310/29FA310 ONLY) 4-093-139-11 INSERT, DOOR BREAKAGE (L) (KV-27FA310 ONLY) 4-101-451-41 MANUAL, INSTRUCTION (KV-27FA310/29FA310 ONLY) 4-101-456-21 MANUAL, INSTRUCTION (KV-27FS120/27FA310 ONLY) 4-101-456-31 MANUAL, INSTRUCTION (KV-27FS120/27FA310 CANADA ONLY) 4-101-456-41 MANUAL, INSTRUCTION (KV-29FS120LN/29FS120LS ONLY) REMOTE COMMANDER 1-476-680-21 REMOTE COMMANDER (RM-Y180) (KV-27FA310/29FA310 ONLY) 1-478-707-11 REMOTE COMMANDER (RM-Y195) (KV-27FS120/29FS120LN/29FS120LS ONLY) 4-978-977-11 BATTERY COVER (FOR RM-Y180/Y195) Sony Corporation 9-965-960-02 KV-27FA310/27FS120/29FA310/29FS120 Sony Technology Center Technical Services Service Promotion Department English 2004CJ74WEB-1 Printed in USA © 2004.3 80 SERVICE MANUAL BA-6 CHASSIS In an effort to reduce the size of this pdf file the tiled schematics are not attached to this Service Manual. To receive a complete set of the tiled schematics for this manual please submit a request to Nita Wardlaw at [email protected]. Connecting Additional Equipment 4-101-456-21(2) Operating Instructions KV-27FS120 © 2004 by Sony Corporation User Guide Connecting Additional Equipment WARNING To reduce the risk of fire or electric shock, do not expose the TV to rain or moisture. ✍ You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. NOTIFICATION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE, NE PAS OUVRIR PRECAUCION RIESGO DE CHOQUE ELECTRICO NO ABRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Note to the CATV Installer This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. SAFETY PRECAUTIONS ❏ ❏ ❏ Operate the TV only on 120 V AC. One blade of the power plug is wider than the other for safety purposes and will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet, contact your dealer. If any liquid or solid object falls into the TV, unplug it and have it checked by qualified personnel before operating it further. CAUTION When using TV games, computers, and similar products with your TV, keep the brightness and contrast functions at low settings. If a fixed (non-moving) pattern is left on the screen for long periods of time at a high brightness or contrast setting, the image can be permanently imprinted onto the screen. Continuously watching the same channel can cause the imprint of station logos onto the TV screen. These types of imprints are not covered by your warranty because they are the results of misuse. To reduce the risk of electric shock, do not use this polarized plug with an extension cord, receptacle, or other outlet unless the blades can be fully inserted to prevent blade exposure. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference with radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ❏ ❏ ❏ ❏ Reorient or relocate the receiving antennas. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Protecting the TV ❏ ❏ To prevent internal heat build-up, do not block the ventilation openings. Do not install the TV in a hot or humid place, or in a place subject to excessive dust or mechanical vibration. Note on Caption Vision This television receiver provides display of television closed captioning in accordance with § 15.119 of the FCC rules. Use of this television for other than private viewing of programs broadcast on UHF or VHF or transmitted by cable companies for the use of the general public may require authorization from the broadcaster-cable company and/or program owner. Owner’s Record The model and serial numbers are located on the front cover of this manual and at the rear of your TV. Trademarks and Copyrights ENERGY STAR is a registered mark. As an ENERGY STAR® Partner, Sony has determined that this product or product model meets the ENERGY STAR® guidelines for energy efficiency. SRS and the ( SRS Labs, Inc. )® symbol are trademarks of Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under USP 4638258, 5510752 and 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc. WEGA, FD Trinitron, ClearEdge VM, Steady Sound and Caption Vision are registered trademarks of Sony Corporation. User Guide IMPORTANT SAFEGUARDS For your protection, please read these instructions completely, and keep this manual for future reference. Carefully observe and comply with all warnings, cautions and instructions placed on the set, or described in the operating instructions or service manual. WARNING To guard against injury, the following basic safety precautions should be observed in the installation, use, and servicing of the set. Use Power Sources This set should be operated only from the type of power source indicated on the serial/model plate. If you are not sure of the type of electrical power supplied to your home, consult your dealer or local power company. For those sets designed to operate from battery power, refer to the operating instructions. Attachments Do not use attachments not recommended by the manufacturer, as they may cause hazards. Do not place any objects, especially heavy objects, on top of the set. The object may fall from the set, causing injury. Cleaning Unplug the set from the wall outlet before cleaning or polishing it. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the set. If a snapping or popping sound from a TV set is continuous or frequent while the TV is operating, unplug the TV and consult your dealer or service technician. It is normal for some TV sets to make occasional snapping or popping sounds, particularly when being turned on or off. Grounding or Polarization Installation This set may be equipped with a polarized alternating current line plug (a plug having one blade wider than other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. Always use two or more people to lift or move the set. The set is heavy and the bottom surface is flat. Serious injury can result from trying to move the set by yourself alone, or from unsteady handling. Install the set on a stable, level surface. For the set with a three-wire grounding type AC plug This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to have a suitable outlet installed. Do not defeat the safety purpose of the grounding plug. Overloading Do not overload wall outlets, extension cords or convenience receptacles beyond their capacity, since this can result in fire or electric shock. Always turn the set off when it is not to be used. When the set is left unattended and unused for long periods of time, unplug it from the wall outlet as a precaution against the possibility of an internal malfunction that could create a fire hazard. Do not disconnect the antenna or the power cord during a heavy storm. Lightning may strike while you are holding the cable or cord, causing serious injury. Turn off your TV and wait for the weather to improve. Object and Liquid Entry Never push objects of any kind into the set through the cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the set. Water and Moisture Do not use power-line operated sets near water — for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc. Accessories Do not place the set on an unstable cart, stand, tripod, bracket, table, or shelf. The set may fall, causing serious injury to a child or an adult, and serious damage to the set. Use only a cart or stand recommended by the manufacturer for the specific model of TV. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. Ventilation The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of the set, and to protect it from overheating, these slots and openings must never be blocked or covered. • Never cover the slots and openings with a cloth or other materials. Connecting Additional Equipment • Never block the slots and openings by placing the set on a bed, sofa, rug or other similar surface. • Never place the set in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided. • Do not place the set near or over a radiator or heat register, or where it is exposed to direct sunlight. Service Damage Requiring Service Unplug the set from the wall outlet and refer servicing to qualified service personnel under the following conditions: • When the power cord or plug is damaged or frayed. • If liquid has been spilled into the set or objects have fallen into the product. • If the set has been exposed to rain or water. • If the set has been subject to excessive shock by being dropped, or the cabinet has been damaged. • If the set does not operate normally when following the operating instructions. Adjust only those controls that are specified in the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the set to normal operation. • When the set exhibits a distinct change in performance — this indicates a need for service. Power-Cord Protection Do not allow anything to rest on or roll over the power cord, and do not place the set where the power cord is subject to wear or abuse. Antennas Outdoor Antenna Grounding If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits. WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM, EXTREME CARE SHOULD BE TAKEN TO KEEP FROM CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT WITH THEM IS ALMOST INVARIABLY FATAL. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in USA and Section 54 of the Canadian Electrical Code in Canada provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. Antenna Grounding According to the NEC Antenna Grounding According to the National Electrical Code, ANSI/NFPA 70. ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRIC SERVICE EQUIPMENT NEC - NATIONAL ELECTRIC CODE GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ARTICLE 250, PART H) Lightning For added protection for this television receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the receiver due to lightning and power-line surges. Servicing Do not attempt to service the set yourself since opening the cabinet may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Replacement Parts When replacement parts are required, be sure the service technician certifies in writing that he has used replacement parts specified by the manufacturer that have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards. Safety Check Upon completion of any service or repairs to the set, ask the service technician to perform routine safety checks (as specified by the manufacturer) to determine that the set is in safe operating condition, and to so certify. When the set reaches the end of its useful life, improper disposal could result in a picture tube implosion. Ask a qualified service technician to dispose of the set. User Guide Contents Introduction Introducing the FD Trinitron WEGA® Features......................................................................... 1 About this Manual.......................................................................................................................... 2 Batteries for the Remote Control .................................................................................................. 2 Front Panel Menu Controls ........................................................................................................... 2 Using the Remote Control Remote Control Description.......................................................................................................... 3 Programming the Remote Control............................................................................................... 5 Manufacture’s Codes...................................................................................................................... 6 Using your TV Remote Control with Other Equipment........................................................... 7 Connecting Your TV TV Rear Panel .................................................................................................................................. 9 Basic Connections ......................................................................................................................... 11 Connecting Additional Equipment............................................................................................ 12 Using Basic Functions Setting Up the TV.......................................................................................................................... 23 Quick Start to the Menus ............................................................................................................. 24 Using the Menus How to Access Menus.................................................................................................................. 27 Using the Video Menu......................................................................................................... 28 Using the Audio Menu ....................................................................................................... 29 Using the Channel Menu.................................................................................................... 31 Using the Parent Menu ....................................................................................................... 33 Parental Control..................................................................................................................... 34 United States: Selecting Custom Rating Options.............................................................. 36 Canada: Selecting Custom Rating Options........................................................................ 38 Using the Timer Menu ........................................................................................................ 39 Using the Setup Menu......................................................................................................... 40 Other Information Troubleshooting ............................................................................................................................ 41 Specifications ................................................................................................................................. 45 Index ...................................................................................................................................................... 47 Introduction Congratulations on your purchase of the Sony FD Trinitron WEGA®. ® Introducing the FD Trinitron WEGA Features Some of the features you will enjoy include: ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ FD Trinitron Flat CRT — Delivers a picture with uncompromising accuracy and outstanding image detail via a technologically advanced tube. Y, PB, PR Inputs — Provides component video inputs for superior picture quality (480i only). BBE — Gives sound more impact by using audio technology to compensate for phase effects in speakers. SRS — Produces a dynamic three-dimensional sound for stereo programs. ClearEdge VM — Sharpens picture definition to give objects a crisp, clean edge. Favorite Channels — Provides instant access to your favorite channels with the touch of a button. Info Banner — Displays the name and the remaining time of the current program viewed, if available. Universal Remote Control — Operates your connected cable box, VCR, digital satellite receiver, DVD player, or DVD/VCR combination unit. Energy Star® — Meets the Energy Star guidelines for energy efficiency. Parental Control (V-Chip) — Helps parents monitor what their children watch on TV by establishing rating limits. Front Panel Controls — Allows access to the on-screen menus without the use of a remote control. Front A/V Inputs — Lets you quickly connect video games, camcorders or stereo/mono equipment. 16:9 Enhanced — Provides enhanced picture resolution for wide-screen sources such as DVD. 1 About this Manual This manual provides instructions to help you enjoy your new TV. It shows you how to connect to an antenna or cable, cable box, VCR, DVD, satellite receiver, stereo system, or camcorder. Once your TV is connected, follow the instructions and use the remote control to access the on-screen menus. Batteries for the Remote Control Insert two AA (R6) batteries (supplied) into the remote control using the following illustration as a guide. ✍ ✍ Under normal conditions, batteries will last up to six months. If the remote control does not operate properly, the batteries might be worn out. If you will not be using the remote control for an extended period of time, remove the batteries to avoid possible damage from battery leakage. Front Panel Menu Controls >PC< The front Audio/Video panel controls allow you to access the menu without the remote control. ❏ ❏ ❏ ✍ 2 Press to display the on-screen menu. Use the and buttons on the front Audio/Video panel instead of your remote control. Use the button on the front Audio/Video panel to navigate through the menus, then select an item. The front panel controls also allow you to change your channels (CH+/-), adjust the volume (VOL +/-), and change video inputs. To navigate the menus with your remote control, see “Using the Menus” on page 27. Remote Control Using the Remote Control Remote Control Description Button A K B L C 1 MUTING Press to turn off the sound. Press again or press to restore sound. 2 SYSTEM OFF Press to turn off the equipment programmed into the remote control. See “Programming the Remote Control” on page 5. This button does not work with DVD/VCR combo units, and may not work with older Sony equipment. M 3 TV/VCR/DVD N D E O P 4 PICTURE MODE Q F G I U Press repeatedly to step through the available video picture modes: Vivid, Standard, Movie and Pro. Also available in the Video menu. See “Using the Video Menu” on page 28 for details. Press repeatedly until the TV displays the time in minutes (15, 30, 45, 60, or 90) that you want the TV to remain on before shutting off automatically. Cancel by pressing until Sleep Off appears. 6 JUMP Press to jump back and forth between two channels. The TV alternates between the current channel and the last channel that you selected. JUMP will not work if any FUNCTION Mode (VCR/DVD, SAT/ CABLE, TV) is activated. 7 TV/SAT Press to switch between the TV and SAT (satellite) inputs when in SAT FUNCTION mode. S T Press to change the VHF/UHF output of the VCR (or DVD/VCR combination unit). If you have a non-Sony VCR or DVD, you will need to program the remote control to recognize your VCR or DVD. For details, see “Programming the Remote Control” on page 5. 5 SLEEP R H Description Press for a direct selection of Effect settings (Simulated, SRS, Off) when the remote is in TV FUNCTION mode. See “Using the Audio Menu” on page 29 for details. J 8 RESET Press to return to factory settings while in an on-screen menu. 9 VOL (volume) Press (+) or (-) to adjust the volume. q; CODE SET Press to program your remote control to operate connected video equipment. See “Programming the Remote Control” on page 5. 3 Remote Control Button Description qa POWER buttons Press to turn on and off the TV and other audio/ video equipment you have programmed into the remote control. For instructions, see “Programming the Remote Control” on page 5. qs FUNCTION buttons Press to select the equipment (VCR/DVD, SAT/ CABLE, TV) that you want to operate with the remote control. The indicator (LED) lights up momentarily when pressed to show which device the remote control is operating. qd VCR (operating) Press to operate your VCR. The VCR must be programmed into the remote control. For instructions, see “Programming the Remote Control” on page 5. qf TV/VIDEO Press to cycle through available video inputs. qg DISPLAY Press once to display the current time (if set) and the program status such as channel number, Channel Label (if set), video input, and Video Label (if set). Press again to turn off the display. qh MTS/SAP Press to cycle through the Multi-channel TV Sound (MTS) options: Stereo, Auto SAP (Second Audio Programming), and Mono. qj Press to change channels. The channel changes after two seconds. 0 9 and ENTER ✍ 4 qk GUIDE Press to display the program guide of your satellite receiver. ql Press the arrow buttons to move the cursor in the on-screen menus. Press the center button to select an option. w; MENU Press to display the on-screen menu. Press again to exit the menu at any time. wa CH (channel) Press to change channels. To scan rapidly through the channels, press and hold down the CH+ or CH- button. If you lose your remote control, see page 42. If you have video equipment other than Sony brand (or if you have a Sony DVD/VCR combination unit) that you want to control with the TV’s remote control, use the following procedure to program the remote control. 1 Check the list of “Manufacturer’s Codes” on page 6 and find the three-digit code number for the manufacturer of your component. If more than one code number is listed, use the number listed first. 2 Press ✍ 3 ✍ 4 5 6 ✍ . The and FUNCTION button will flash when you press . Press or FUNCTION button to indicate the type of component you want to program with the remote control. You must do step 4 within 10 seconds of step 3, or you must redo steps 2 and 3. Use the 0 Press . 9 buttons to enter the three-digit manufacturer’s code number. To check if the code number works, aim the TV’s remote control at the component and press on the green POWER button (VCR/DVD, SAT/CABLE, TV) that corresponds with that component. If it responds, you are done. If not try using another code listed for that manufacturer. If you have problems programming your remote control, see “Troubleshooting” on page 42. 5 Remote Control Programming the Remote Control Remote Control Manufacturer’s Codes VCRs Manufacturer Sony Admiral (M. Ward) Aiwa Audio Dynamic Broksonic Canon Citizen Craig Criterion Curtis Mathes Daewoo DBX Dimensia Emerson Fisher Funai General Electric Go Video Goldstar Hitachi Instant Replay JC Penney JVC Kenwood LXI (Sears) Magnavox Marantz Marta Memorex Minolta Mitsubishi/ MGA Multitech NEC Olympic Optimus Panasonic 6 Code 301, 302, 303 327 338, 344 314, 337 319, 317 309, 308 332 302, 332 315 304, 338, 309 341, 312, 309 314, 336, 337 304 319, 320, 316, 317, 318, 341 330, 335 338 329, 304, 309 322, 339, 340 332 306, 304, 305, 338 309, 308 309, 305, 304, 330, 314, 336, 337 314, 336, 337, 345, 346, 347 314, 336, 332, 337 332, 305, 330, 335, 338 308, 309, 310 314, 336, 337 332 309, 335 305, 304 323, 324, 325, 326 325, 338, 321 314, 336, 337 309, 308 327 308, 309, 306, 307 Pentax Philco Philips Pioneer Quasar RCA/ PROSCAN Realistic Sansui Samsung Sanyo Scott Sharp Shintom Signature 2000 (M. Ward) SV2000 Sylvania Symphonic Tashiro Tatung Teac Technics Toshiba Wards Yamaha Zenith 305, 304 308, 309 308, 309, 310 308 308, 309, 306 304, 305, 308, 309, 311, 312, 313, 310, 329 309, 330, 328, 335, 324, 338 314 322, 313, 321 330, 335 312, 313, 321, 335, 323, 324, 325, 326 327, 328 315 338, 327 338 308, 309, 338, 310 338 332 314, 336, 337 314, 336, 338, 337 309, 308 312, 311 327, 328, 335, 331, 332 314, 330, 336, 337 331 Laserdisc Players Manufacturer Sony Panasonic Pioneer Code 701 704, 710 702 DVD/VCR Combination Units Manufacturer Sony Broksonic JVC Panasonic Samsung Toshiba Code 601 605 604 609 603 602 DVD Players Manufacturer Sony Hitachi JVC Magnavox Mitsubishi Onkyo Oritron Panasonic Philips Pioneer RCA Samsung Toshiba Zenith Code 751 758 756 757 761 762 759 753 757 752 755 758 754 760 Cable Boxes Manufacturer Sony Hamlin/Regal Jerrold/G.I./ Motorola Oak Panasonic Pioneer Scientific Altanta Tocom Zenith Code 230 222, 223, 224, 225, 226 201, 202, 203, 204, 205, 206, 207, 208, 218 227, 228, 229 219, 220, 221 211, 214, 215 209, 210, 211 216, 217 212, 213 Satellite Receivers Manufacturer Sony DIRECT TV Dish Network Echostar General Electric Hitachi Hughes Mitsubishi Panasonic RCA/ PROSCAN Toshiba Code 801 809 810 810 802 805 804 809 803 802, 808 806, 807 Operating a VCR Press Remote Control Using your TV Remote Control with Other Equipment To Activate the remote control to operate the VCR (FUNCTION button) Power on/off the VCR (VCR/DVD green button) or 0 9 , ENTER Change channels (using tuner) Play video tape Stop or Rewind or Fast-forward a video tape Pause and (Simultaneously) Record Switch between VCR and TV inputs Operating a DVD Player Press To Activate the remote control to operate the DVD (FUNCTION button) Power on/off the DVD (VCR/DVD green button) 0 9 , ENTER Select chapters Search chapters forward or backward or Play DVD Stop Pause Search the picture forward or backward during playback Display the DVD menu Use the arrow buttons to move the cursor in the menu, and the center button to select an option Switch between DVD and TV inputs Operating a Cable Box or Satellite Receiver Press To Activate the remote control to operate the cable box or satellite receiver (FUNCTION button) Power on/off the cable box or satellite receiver (SAT/CABLE green button) or 0 9 , ENTER (using tuner) Change channels Change back to previous channel Display channel number (satellite receiver) 7 Remote Control Operating a Cable Box or Satellite Receiver Press To Display SAT Guide (satellite receiver) Display SAT Menu (satellite receiver) Use the arrow buttons to move the cursor in the menu, and the center button to select an option (satellite receiver) Press to switch between the TV and SAT inputs (satellite receiver) Operating a DVD/VCR Combination Unit Press To Activate the remote control to operate the DVD/VCR (FUNCTION button) Power on/off the DVD/VCR combination unit (VCR/DVD green button) When the VCR is not playing, switches between the DVD player and VCR’s tuner Display the DVD Menu Play Stop Pause Rewind or fast-forward a video tape (VCR) Search the picture forward or backward during playback (DVD) or Use the arrow buttons to move the cursor in the menu, and the center button to select an option (DVD) and (Simultaneously) or 0 9 ,ENTER (using tuner) 8 Record (VCR) Change channels (VCR) Connecting Your TV Read this section before setting up your TV for the first time. This section explains how to make the basic connections and how to connect optional equipment. TV Rear Panel S VIDEO Connections 3 1 AUDIO OUT (VAR/FIX) 4 Y PB 1 PR VIDEO L (MONO) R 2 3 L L (MONO) R R 4 5 Jack Description 1 VHF/UHF This input connects to your VHF/UHF antenna or cable. 2 S VIDEO This input connects to the S VIDEO OUT jack on your VCR or other video equipment that has S VIDEO. S VIDEO provides better picture quality than the VHF/UHF jacks or the video input jack. S VIDEO does not provide sound, so you still must connect the audio cables. 3 VIDEO/AUDIO L(MONO), R This input connects to the AUDIO/VIDEO output jacks on your VCR or other video equipment. A third video input jack (VIDEO 2) is located on the front panel of the TV. These AUDIO/VIDEO input jacks provide better picture quality than the VHF/UHF jack. 9 This input connects to the component video Y, PB, PR, and AUDIO L, R jacks on your DVD player or digital set-top box (480i only). 5 AUDIO OUT (VAR/FIX) L(MONO), R This jack connects to the Audio input jacks on your audio equipment. You can listen to your TV’s audio through your stereo system. Connections 4 Y, PB, PR/ L, R 10 Basic Connections TV with Cable, Indoor, or Outdoor Antenna Depending on the cable system available in your home, choose one of the connections below: Connections Use this to connect the TV to a cable system or an antenna with a 75-ohm cable (usually built into newer homes). Use this to connect the TV to a dipole antenna, also known as a “rabbit ears” antenna (usually found in older homes). ✍ If you are connecting to an indoor or outdoor antenna, you may need to adjust the orientation of the antenna for the best reception. 11 Connecting Additional Equipment Connecting a TV and VCR Rear of TV 3 1 S VIDEO AUDIO OUT (VAR/FIX) 4 Y PB 2 VIDEO VCR L R 1 L (MONO) L (MONO) R R LINE IN VIDEO AUDIO L AUDIO R LINE OUT Video (yellow) Audio L (white) Audio R (red) From cable/antenna Optional connection 1 Connect the coaxial cable from your TV antenna or cable service to the IN jack on your VCR. 2 Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF jack on the TV. Optional connection ❏ ❏ If your VCR is equipped with video outputs, you can get better picture quality by connecting audio/video cables (not supplied) from AUDIO/VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV. For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does not provide sound, so you still must connect the audio cables. Using your TV with this connection This connection allows you to do the following: ❏ ❏ ❏ Program your Sony remote control to operate your VCR (see page 5). To activate your remote, press (FUNCTION button) to operate your VCR. To do this, first program your remote control, then use the Channel Fix feature to set your TV to channel 3 or 4 (see page 31). Press repeatedly to switch between VCR input (VIDEO input) and VHF/UHF (local channels). 12 Connections PR Some cable TV systems use scrambled or encoded signals that require a cable box to view all channels. If you subscribe to such type of service, use this connection. Cable box 1 VIDEO AUDIO L AUDIO R LINE OUT From cable/ antenna Rear of TV 3 1 S VIDEO 2 P P VIDEO L (MONO) R 1 2 Connect the coaxial cable from your cable service to the IN jack on your cable box. Connect a coaxial cable (not supplied) from the OUT jack on your cable box to the VHF/UHF jack on your TV. Using your TV with this connection This connection allows you to do the following: ❏ ❏ Program your Sony remote control to operate your cable box (see page 5). To activate your remote press (FUNCTION button) to operate your cable box and then use the 0 9 buttons or CH+/- buttons to change the channels. In order to do this, first program your remote control, then use the Channel Fix feature to set your TV to channel 3 or 4 (see page 31). 13 Remote Control TV and Cable Box Connecting a TV, VCR, and Cable Box ✍ DIGITAL CABLE BOX USERS: If you are connecting a digital cable box, you will need a special bidirectional splitter (5-900 Mhz mininum) that is designed to work with your digital cable box. Use this connection if you subscribe to a cable system that scrambles some channels (pay channels), but not all of them. This setup allows you to: Connections ❏ ❏ change channels through your cable box or VCR when you are receiving a scrambled signal change channels through your TV Rear of TV 3 1 S VIDEO AUDIO OUT (VAR/FIX) 4 Y PB PR VIDEO VCR L L (MONO) R L (MONO) R R LINE IN VIDEO AUDIO L AUDIO R LINE OUT 2b Video (yellow) Audio L (white) Audio R (red) 3 Cable box 4 1 Splitter VIDEO AUDIO L AUDIO R Cable 2a LINE OUT 5 1 Connect the single input jack of the splitter (not supplied) to your incoming cable connection. 2 Using coaxial cables (not supplied), connect the two output jacks of the splitter (not supplied) to: a) the IN jack on your cable box b) the VHF/UHF jack on the TV 3 Using a coaxial cable (not supplied), connect the OUT jack on your cable box to the IN jack on your VCR. 4 Using the audio/video cables (not supplied), connect the AUDIO VIDEO OUT on your VCR to the AUDIO/VIDEO IN on your TV. 5 Using the audio/video cables (not supplied), connect the AUDIO VIDEO OUT on your cable box to the AUDIO/VIDEO IN on your TV. 14 Optional connection ❏ For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does not provide sound, so you still must connect the audio cables. Using your TV with this connection ❏ ❏ Connections ❏ Program your Sony remote control to operate your VCR or cable box (see page 5). To activate your remote, press (FUNCTION button) to operate your VCR or (FUNCTION button) to operate your cable box. To do this, first program your remote control, then use the Channel Fix feature to set your TV to channel 3 or 4 (see page 31). Press repeatedly to switch between VCR input (VIDEO input), VHF/UHF (local channels or unscrambled), or cable box (cable system or scrambled channels). 15 Connecting a TV and Satellite Receiver From cable/ antenna 2 Rear of TV 3 1 S VIDEO AUDIO OUT (VAR/FIX) 4 Y PB PR Connections Satellite receiver 1 VIDEO 1 VIDEO 2 VIDEO 2 VIDEO 1 L L R R L (MONO) R PB Satellite antenna cable VIDEO L Y L (MONO) R R PR Audio R (red) Audio L (white) Video (yellow) 3 1 2 Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver. 3 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite receiver to AUDIO/VIDEO IN on your TV. Connect the coaxial cable from your cable service or antenna to the VHF/UHF jack on your TV. Using your TV with this connection This connection allows you to do the following: ❏ ❏ ❏ 16 Program your Sony remote control to operate your satellite receiver (see page 5). To activate your remote, press (FUNCTION button) to operate your satellite receiver. See page 7 on how to operate other functions. Press repeatedly to switch to satellite receiver input (VIDEO input). Connecting a TV, VCR, Cable/Antenna, and Satellite Receiver using Composite Video (VIDEO/AUDIO L(MONO), R) From cable or Satellite antenna antenna cable 2 Optional Rear of TV Splitter 1 3 1 S VIDEO AUDIO OUT (VAR/FIX) 4 Y PB 3a 3b For Viewing PR Satellite receiver VIDEO L L Y VIDEO 1 VIDEO 2 R VIDEO 2 VIDEO 1 L (MONO) R R PB L L R R PR Video (yellow) Audio L (white) Audio R (red) 4 For Recording LINE IN VIDEO AUDIO L AUDIO R LINE OUT 6 For Viewing VCR 5 For Playback 1 2 Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver. 3 Using coaxial cables (not supplied), connect the two output jacks of the splitter (not supplied) to: a) the IN jack on your satellite receiver b) the VHF/UHF jack on the TV 4 Using a coaxial cable (not supplied), connect the OUT jack on your satellite receiver to the VHF/UHF IN on your VCR. 5 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your VCR to the AUDIO/VIDEO IN on your TV. 6 Using audio/video cables (not supplied), connect the AUDIO/VIDEO OUT on your satellite receiver to the AUDIO/VIDEO IN on your TV. Connect the single input jack of the splitter (not supplied) to your incoming cable/antenna (optional connection to view local channels or broadcast). Using your TV with this connection This connection allows you to do the following: ❏ ❏ ❏ Program your Sony remote control to operate your VCR or satellite receiver (see page 5). To activate your remote, press (FUNCTION button) to operate your VCR or (FUNCTION button) to operate your satellite receiver. Press repeatedly to switch between VCR input (VIDEO input), VHF/UHF (local channels or unscrambled), or your cable box (cable system or scrambled channels). 17 Connections (MONO) Connecting a TV, VCR, and Satellite Receiver using Component Video (Y, PB, PR) From cable/antenna 4 Rear of TV 3 1 2 S VIDEO AUDIO OUT (VAR/FIX) 4 Y PB Connections 1 PR VIDEO 1 VIDEO 2 VIDEO 2 VIDEO 1 3 L L R 6 7 L L (MONO) R R Video (yellow) Audio L (white) Audio R (red) PR Y (green) PB (blue) PR (red) R VIDEO AUDIO L AUDIO R LINE OUT PB R L (MONO) LINE IN Y VIDEO VCR Satellite Receiver Audio L (white) Audio R (Red) 5 1 Connect the coaxial cable from your satellite antenna to SATELLITE IN on the satellite receiver. 2 3 Connect the coaxial cable from your cable service or antenna to the IN jack on your VCR. 4 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite receiver to AUDIO/VIDEO IN on your VCR. 5 Using audio/video cables (not supplied), connect the AUDIO/VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV. 6 Using component video cables (not supplied), connect the Y, PB, PR OUT on your satellite receiver to Y, PB, PR IN on your TV. 7 Connect AUDIO OUT on your satellite receiver to AUDIO IN on your TV. Using a coaxial cables (not supplied), connect the OUT jack on your VCR to the VHF/UHF jack on your TV. Using your TV with this connection This connection allows you to do the following: ❏ ❏ ❏ ❏ 18 Program your Sony remote control to operate your VCR or satellite receiver (see page 5). Turn on your VCR to enable your satellite receiver to work with this connection. To activate your remote, press (FUNCTION button) to operate your VCR or (FUNCTION button) to operate your satellite receiver. Press repeatedly to switch between VCR input (VIDEO input), VHF/UHF (local channels or unscrambled), or your cable box (cable system or scrambled channels). Connecting a DVD Player using Composite Video (VIDEO/AUDIO L(MONO),R) Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your DVD player to AUDIO/VIDEO IN on your TV. Rear of TV Rear of DVD Player 3 1 S VIDEO AUDIO OUT (VAR/FIX) 4 Y PB PR VIDEO L L L (MONO) (MONO) R R R Optional connection ❏ For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does not provide sound, so you still must connect the audio cables. Connecting a DVD Player using Component Video (Y, PB, PR/R, L) If your DVD player is equipped with component video outputs (Y, PB, PR), you can improve the picture quality by using component video cables (480i only). Rear of TV Rear of DVD Player 3 1 S VIDEO AUDIO OUT (VAR/FIX) 4 Y PB PR VIDEO L L (MONO) R PR (red) PB (blue) Y (green) 2 L (MONO) R R Audio L (white) Audio R (red) 1 1 Using component video cables (not supplied), connect the Y, PB, PR OUT on your DVD player to Y, PB, PR IN on your TV. 2 Connect AUDIO OUT on your DVD player to AUDIO IN on your TV. ✍ The Y, PB, PR outputs on your DVD player are sometimes labeled Y, CB, and CR or Y, B-Y, and R-Y. If so, connect the cables to like colors. Using your TV with this connection This connection allows you to do the following: ❏ ❏ ❏ Program your Sony remote control to operate your DVD (see page 5). To activate your remote, press (FUNCTION button) to operate your DVD (see page 7). Press repeatedly to switch to the DVD player's input (VIDEO input). 19 Connections Video (yellow) Audio L (white) Audio R (red) Optional connection Connecting an Audio System ✍ If you are connecting a Home Theater, please refer to your Home Theater manual for additional connections. Using audio/video cables (not supplied), connect AUDIO OUT on your TV to one of the unused line inputs (e.g. TV, AUX, TAPE2) on your stereo. 2 3 Set the Speaker option to Off. For more instructions, see "Using the Audio Menu" on page 29. Connections 1 After you connect the audio system, you can control the volume level from your TV or audio system. ❏ To control the volume from the TV, use the front panel controls or the VOL +/buttons on the remote. ❏ To control the volume through the connected audio system, open the Audio Out option on the Audio Menu and select Fixed. For more instructions, see "Using the Audio Menu" on page 29. Rear of TV 3 1 S VIDEO AUDIO OUT (VAR/FIX) 4 Y PB PR AUDIO-L (white) VIDEO L L (MONO) R L (MONO) R R AUDIO-R (red) Line input Connecting a Camcorder (for playback) To connect your camcorder, you can use the Audio/Video inputs on either the front or rear panel of the TV. Using the audio/video cables (not supplied), connect the AUDIO/VIDEO OUT on your camcorder to the AUDIO/VIDEO IN on your TV. Front A/V Panel >PC< A/V output Audio R (red) Audio L (white) Video (yellow) Optional connection ❏ 20 For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does not provide sound, so you still must connect the audio cables. Connecting for Video Tape Editing (VCR and Camcorder) Camcorder (for playback) 1b Rear of TV or 3 1 S VIDEO 1a PB PR VIDEO L VCR (for playback) L (MONO) R VCR (for recording) L (MONO) R R Video (yellow) Audio L (white) Audio R (red) 2 1 For video tape editing connect to the VCR the following sources (VCR or Camcorder): ❏ ❏ 2 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your first VCR to AUDIO/VIDEO IN on your second VCR (option 1a) Using audio/video cables (not supplied), connect the AUDIO/VIDEO OUT on your Camcorder to the AUDIO/VIDEO IN on your second VCR (option 1b) Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on the second VCR to the AUDIO/VIDEO IN on your TV. Using your TV with this connection This connection allows you to do the following: ❏ ❏ Program your Sony remote control to operate your VCR (see page 5). To activate your remote, press (FUNCTION button) to operate your VCR, see page 7 on how to operate other functions. 21 Connections A/V output AUDIO OUT (VAR/FIX) 4 Y Using Basic Functions Setting Up the TV After you have finished connecting your TV, you can use Auto Program to set up your channels. During Auto Program, the TV will automatically search for available channels and program receivable channels. ✍ 1 When you start Auto Program wait until it is finished; otherwise it will skip over channels that are available. Perform Auto Program again to program receivable channels. Press to turn on the TV. The Initial Setup screen appears. Initial Setup Auto Program [CH+] [CH–] Exit 2 ✍ Press on the remote control or on the TV front panel to start Auto Program, or press to exit. The Initial Setup screen appears each time you turn on the TV until you perform Auto Program. To perform Auto Program again 1 2 3 4 Press 5 6 Press f to highlight Auto Program. Press . Press g to highlight Channel Menu. Press f to highlight Cable. Press to select. Press F or f to highlight On or Off according to how you connected your TV. Press select. After Auto Program finishes, press to to search for channels. to exit. To reset the TV to factory settings 1 2 3 Turn the TV on. 4 Release Hold down on the remote control. Press and release the POWER button on the TV front panel. The TV will turn itself off, then back on. . 23 Basic Functions First please connect cable/antenna Quick Start to the Menus The following settings are available in your on-screen menus. For more details on how to use the menus, see “Using the Menus” on page 27. Menu Allows you to Video: Vivid Picture Brightness Color Hue Sharpness Video Mode : Vivid Picture Controls Color Temp. : Cool ClearEdge VM : High Move Select End Return Select End Basic Functions Adjust your picture settings. Options Audio Treble Bass Balance Steady Sound: Off Effect : SRS Options Move Select MTS: Stereo Speaker: On Audio Out: Fixed End Return Select End Change your audio settings. Channel Setup Favorite Channels Cable : Off Channel Fix : Off Auto Program Channel Skip/Add Channel Label Move Select End Customize your channel settings. Parental Control Password : Move 24 Select End Set rating limits on your TV based on program rating or content. Menu Allows you to Timer Timer 1 : Set Timer 2 : Set Current Time Move Select End Set the clock on your TV and program scheduled viewing using Timer 1 and Timer 2. Select closed captioning options, display the name of the current program and its remaining time (Info Banner), label video inputs, adjust tilt correction, enhance your DVD picture resolution (16:9 Enhanced) or select menu language. Basic Functions Setup Caption Vision : Off Info Banner : Off Video Label Tilt Correction Language : English 16:9 Enhancement: Off Move Select End 25 Using the Menus This section shows the options available for setting up and adjusting the TV. Using the Remote Control to Navigate on the On-Screen Menus Move Select To navigate on the on-screen menus, use the “arrow” buttons (F , f , G , g) to move the cursor. Pressing these arrows will cause the cursor to move in the corresponding direction. ) will allow you to select an option. Pressing center button ( How to Access Menus To Access Menus Press 6 Press ✍ to display the on-screen menu. Use the G or g buttons to highlight the desired menu icon. Press Menus 1 2 3 4 5 to select it. Use the F or f buttons to scroll up and down through the features. Follow the instructions on the screen. For instructions on using a specific menu, see the page in this section that talks about that menu. to exit the menu. Press once to display the on-screen menu, and press again to return to normal viewing. If no buttons are pressed, the menu closes automatically after about 90 seconds. 27 Using the Video Menu To access the Video menu, use the following steps: To Display To Select Move Press f to highlight an option; then press Mode Customized picture viewing ✍ Press Video: Vivid Picture Brightness Color Hue Sharpness Video Mode : Vivid Picture Controls Color Temp. : Cool ClearEdge VM : High Select End Return Select End . Use the F or f buttons to highlight one of the following options, then press to select it. Vivid: Select for enhanced picture contrast and sharpness. Standard: Select for a standard picture. Movie: Select for a finely detailed picture. Pro: Select for natural picture and sharpness. on the remote control for direct access to the picture modes (Vivid, Standard, Movie, Pro). With the Picture Controls menu open, press F or f to select one of the following option: Picture: Press G to decrease the contrast. Press g to increase contrast. Brightness: Press G to darken the picture. Press g to brighten the picture. Color: Press G to decrease color saturation. Press g to increase color saturation. Hue: Press G to increase the red tones. Press g to increase the green tones. Sharpness: Press G to soften the picture. Press g to sharpen the picture. Color Temp. White color tint adjustment Use the F or f buttons to select from one of the following options: Cool: Gives the white colors a blue tint. Neutral: Gives the white colors a neutral tint. Warm: Gives the white colors a red tint. ClearEdge VM Sharpens picture definition to give objects a crisp edge. Use the F or f buttons to highlight of the following options: High, Low, Off; then press to select it. Menus Picture Control 28 Using the Audio Menu To access the Audio menu, use the following steps: To Display To Highlight Options To Select Audio Treble Bass Balance Steady Sound: Off Effect : SRS Options Move Select Press f to highlight an option; then press MTS: Stereo Speaker: On Audio Out: Fixed End Return Select End . Press G to decrease the higher pitched sounds. Press g to increase the higher pitched sounds. Bass Press G to decrease the lower pitched sounds. Press g to increase the lower pitched sounds. Balance Press G to emphasize the left speaker. Press g to emphasize the right speaker. Steady Sound Stabilizes volume Press F or f to select one of the following options: On: Select to stabilize the volume when changing channels. Off: Select to turn Steady Sound off. Effect Use the F or f buttons to highlight one of the following options, then press to select it. Simulated: Simulates theater quality sound for mono programs. SRS: Produces a dynamic three-dimensional sound for stereo programs. Off: Normal stereo or mono reception. ✍ Press Options to directly select Effect settings (Simulated, SRS, Off). Use these features to change your Audio setting. MTS Multi-Channel TV Sound Use the F or f buttons to highlight one of the following options, then press to select it. Stereo: Select when viewing a broadcast in stereo. Auto SAP: Select to have the TV automatically switch to a Second Audio Program (SAP) when a signal is received. Mono: Select to reduce noise in areas of poor reception. Use the F or f buttons to highlight one of the following Speaker Custom selection options, then press to select it. of audio output On: Select to listen to the sound from the TV speakers source with or without a separate stereo system. Off: Select to turn off the TV speakers and listen to the TV’s sound only through external audio system speakers. 29 Menus Treble Audio Out Use to control the TV’s volume through a stereo ✍ ✍ Menus ✍ 30 Press Use the F or f buttons to highlight one of the following to select it. options, then press Variable: Adjust the volume through your TV. Fixed: Adjust the volume through a connected stereo. to directly select MTS settings (Stereo, Auto SAP, Mono). If your TV is set to Auto SAP, some programs may be muted or distorted. If your TV does not output sound, change your Audio MTS setting to Stereo or Mono. You can only set Audio Out settings when you have set Speaker to Off. Using the Channel Menu To access the Channel menu, use the following steps: To Display To Highlight To Select Press f to highlight an option; then press Favorite Channels Quick access to favorite channels 1 2 3 4 ✍ End Use the F or f buttons to highlight the position (1-8) where you want to set a favorite channel, then press . Use the F or f buttons to find the channel you want to add to your favorite channels. Press to select the channel. The TV will automatically change to the selected channel. to exit. Press G to return to the Channel menu or press To use Favorite Channels, exit all menus and press desired channel number and press . Cable . Press F or f to move the cursor to the Use the F or f buttons to highlight one of the following options, then press to select it. Select if you are receiving cable channels with a CATV cable. Select if you are using a TV antenna. After changing your cable settings, you will need to perform Auto Program. See “To perform Auto Program again” on page 23. Channel Fix Use the F or f buttons to highlight one of the following options, then press to select it. Off: 2-6: Channel Fix is not set. Select when you want to control all channel selection through a cable box or VCR. Select the appropriate channel (usually 3 or 4) and use the cable box’s or VCR’s remote control for channel selection. Video 1: Select from available video inputs when you have connected video equipment (e.g., a satellite receiver) and you want your TV fixed to it. 31 Menus On: Off: ✍ . Channel Setup Favorite Channels Cable : Off Channel Fix : Off Auto Program Channel Skip/Add Channel Label Move Select Auto Program Perform Auto Program whenever setting up your TV. Auto Program will search for available channels and program receivable channels. Channel Skip/Add Use this feature after you run Auto Program to skip unwanted channels or add new ones. 1 Use the F or f buttons to highlight the position of the desired channel, then press . 2 Use the F or f buttons to highlight Skip or Add, then press . 3 ✍ Menus 32 to exit. Press CH + or CH - to skip over channels that have been skipped. You can still use the --9 buttons to directly tune to skipped channels. Channel Label Label up to 40 channels with their call letters ✍ Press G to return to the Channel menu or press 1 Press , then use the F or f buttons until you reach the desired channel number. 2 Press 3 . Use the F or f buttons to Press f to highlight Label, then press display the first call letter or number of the label. Press to select. Repeat this process until you finish selecting all the call letters. 4 When finished, press 5 Press G to return to the Channel menu or press to activate the channel. to activate. to exit. You cannot use Favorite Channels, Cable, Channel Skip/Add, or Channel Label when Channel Fix is set. Using the Parent Menu To access the Parent menu, use the following steps: To Display To Highlight To Select Parental Control Password : Use [0-9] buttons to enter new password Move Select End The Parental Control feature helps parents monitor what their children watch on television. To use the Parent Menu When you select the Parent menu, you are prompted to set a 4-digit password. You cannot access the Parent menu settings without this password. 1 2 ✍ Use the 0 9 buttons to enter a 4-digit password. Confirm your password by entering it again. Keep this manual in a safe place. You need your password for any future access to the Parent menu. If you forget your password, see page 41. Menus 33 Parental Control Setting the Rating You can change the Rating by selecting one of the Parental Lock options. Parental Control Lock : Off Change Password Country : U.S.A. Move 1 End Select Press f to highlight Parental Lock, then press . If you are not familiar with Parental Guideline rating system, use one of the following preset categories to simplify the rating selection: Child, Youth, Young Adult. Menus 2 Use the F or f to highlight the desired rating and press Rating TV will allow a maximum rating of Off No rating limit Child TV-Y, TV-G , G (U.S.), G , C (Canada) . Youth TV-PG , PG (U.S.), 8 ans + (Canada) Young Adult TV-14, PG-13 (U.S.), 14+ (Canada) Custom Select to set more restrictive ratings (see next section) Changing your Password 1 Use the F or f buttons to highlight Change Password and press 2 . Follow steps 1 and 2 for “Using the Parent Menu” on page 33. Select a Country Select U.S.A. to use US ratings (see pages 36-37) or select Canada to use Canadian ratings (see page 38). If you select a Country (U.S.A. or Canada) that is not where you live, the rating you select will not be activated. 1 2 34 Press f to highlight Country, then press . Use the F or f to highlight the desired country and press . Information for Parents To view a program that exceeds the TV rating ❏ ✍ Press , then use the 0 9 buttons to enter your password. Entering your password to view a blocked program will temporarily turn Parental Lock to Off. To reactivate your Lock settings, turn the TV off then back on; the TV will return to the settings that you have selected. Using the Custom Menu Follow the instructions on the screen to make your custom settings. Select the country desired for your TV’s rating limit. See page 36 for U.S. models and page 38 for Canadian models for more information. ✍ Once you have blocked a rating or content, all higher ratings or content will be automatically blocked. Menus 35 United States: Selecting Custom Rating Options For the United States, the Custom Rating menu includes the following options: Movie Rating, TV Rating and Unrated. (For Canada, see page 38.) Movie Rating This system defines the rating levels of movies shown in theaters and on prime cable channels. Rating Defined as Custom Rating G General audience PG Parental guidance suggested PG-13 Parents strongly cautioned R Restricted NC-17 No one 17 and under admitted X Adult audience only Movie Rating TV Rating Unrated: Allow Return Select End TV Rating The TV rating is divided into two groups: age-based and content-based. TV Rating TV-Y: TV-Y7: TV-G: TV-PG: TV-14: TV-MA: Menus Age Press - FV D- LD- LL- SSS- Content VVV: - to block Return Select End Age Defined as Content Defined as TV-Y All children FV Fantasy violence TV-Y7 Directed to older children D Suggestive dialogue TV-G General audience L Strong language TV-PG Parental guidance suggested S Sexual situations V Violence TV-14 Parents strongly cautioned TV-MA Mature audience only ✍ 36 The content ratings will increase depending on the level of the age-based rating. For example, a program with a TV-PG V (Violence) rating may contain moderate violence, while a TV-14 V (Violence) rating may contain intense violence. Unrated You have the option of blocking TV programs or movies that are not rated. Allow Allows all unrated programs Block Blocks all unrated programs Custom Rating Movie Rating TV Rating Unrated: Allow Return ✍ Select End If you choose to block unrated TV programs, please be aware that the following programs may be blocked: emergency broadcasts, political programs, pro, news, public service announcements, religious programs, and weather. Menus 37 Canada: Selecting Custom Rating Options For Canada, the Custom Rating menu includes the following options: English Rating, French Rating, and U.S.A. Rating. English Rating These ratings are for Canadian programs that are broadcast in English. Rating Defined as C Children C8+ Children 8 years and older G General programming PG Parental guidance 14+ Viewers 14 and older 18+ Adult programming Custom Rating English Rating French Rating U.S.A. Rating Return Select End Select End Select End Select End English Rating C: C8+: G: PG: 14+: 18+: - Press to Block Return French Rating Menus These ratings are for Canadian programs that are broadcast in French. Rating Defined as G General 8 ans+ Not recommended for younger children 13 ans+ Not recommended for children under age 13 16 ans+ Not recommended for ages under 16 18 ans+ This program is restricted to adults Custom Rating English Rating French Rating U.S.A. Rating Return French Rating G: 8 ans+: 13 ans+: 16 ans+: 18 ans+: - Press to Block Return U.S.A. Rating For programs from the United States, see “TV Rating” on page 36. 38 Using the Timer Menu To access the Timer menu, use the following steps: To Display To Highlight To Select Timer Timer 1 : Set Timer 2 : Set Current Time Move Current Time to exit the menu. Use the timers to program your TV to turn on and off by day, time, duration, and channel. The timer duration is a maximum of six hours. When the channel is fixed, it is not necessary to set the channel. 1 Use the F or f buttons to highlight Timer 1 or Timer 2, then press . 2 Use the F or f buttons to enter the desired day, start time, duration, and channel, then press . The timer status should be On when the Timer has been set, and the timer light on the front panel of the TV should be on. 3 Press to exit the menu. Menus ✍ Press You must set the Current Time before you can use Timer 1 or Timer 2. Timer 1 and Timer 2 Scheduled viewing ✍ End Set your TV to the current day and time. Press to open the Current Time menu: 1 Use the F or f buttons to enter the correct day and time, then press . 2 ✍ Select Select Off to turn off the Timer. Your previous settings will be saved. When you perform Auto Program, Timer 1 and Timer 2 settings will be cleared. Also, in the event of any loss of power, Current Time, Timer 1, and Timer 2 settings will be cleared. 39 Using the Setup Menu To access the Setup menu, use the following steps: To Display To Highlight To Select Menus Press f to highlight an option; then press . Setup Caption Vision : Off Info Banner : Off Video Label Tilt Correction Language : English 16:9 Enhancement : Off Move End Select Caption Vision ClosedCaptioning Allows you to select from three closed caption modes for programs that are broadcast with closed captioning. Use the F or f buttons to highlight one of the following options, then press to select it. Off: Caption Vision is not activated. Displays printed dialogue and sound effects of a program. CC1, 2, 3, 4: Text1, 2, 3, 4: Displays network/station information. Info Banner Displays the name of the current program and its remaining time (if available) when you change the channel or press the DISPLAY button. Use the F or f buttons to highlight one of the following options: On, Off. Then press . Video Label Label connected equipment Allows you to identify the video components connected to the TV: VHS, DVD, etc. When you press TV/VIDEO to switch inputs, the Video Label appears on-screen. 1 2 3 Press the F or f buttons to highlight the input you want to label and press . Press the F or f buttons to highlight a label and press . Press G to return to the Setup menu or press to exit. Tilt Correction Use the F or f buttons to set the tilt of the picture from –5 to +5, then press to activate. Language Display all menus in the language of your choice. Use the F or f buttons to select from one of the following options: English, Español (Spanish) and Français (French). Then press . 16:9 Enhanced Provides enhanced picture resolution for wide-screen sources such as DVD. This is only available when the TV is in Video mode. 40 Other Information Troubleshooting If you have a problem with your TV, try the suggestions below. If the problem persists, see “Contacting Sony” at the end of this section. General Problem Possible Remedies I want to reset the TV ❏ to the factory settings Turn on the TV. While holding down on the remote control, press POWER button on the TV front panel. The TV will turn itself off, then back on again. Release . The TV is dirty ❏ Clean the TV with a soft dry cloth. Never use strong solvents such as thinner or benzine, which might damage the finish of the cabinet. I lost the parental control password ❏ In the password screen, enter the following master password: 4357. After using the master password, you must create a new password. You cannot use the master to unlock currently blocked channels. There is a black box on the screen ❏ You have selected a text option in the Setup menu (page 40) and no text is available. To turn off this feature, select Off in the Caption Vision option. If you were trying to select closed captioning, select CC1-4 instead of Text1-4. There was a blackout ❏ or power outage, and now the TV won't turn on and the timer LED is flashing Digital cable box does not work Press the POWER button on your remote control or on the TV front panel. ❏ Be sure that you have not connected the digital cable box to the TV’s TO CONVERTER jack. This jack is not compatible with digital cable boxes. ❏ If you are connecting a VCR and digital cable box using a splitter, as described in page 14, you must use a special bidirectional splitter (5~900MHz minimum) that is designed to work with your digital cable box. 41 Remote Control Problem Possible Remedies I cannot operate the remote control ❏ ❏ ❏ ❏ Press TV (FUNCTION) when operating your TV. Check the orientation of the batteries. Batteries could be weak. Replace them (page 2). Move the TV three to four feet away from fluorescent lights. I cannot change channels with the remote control ❏ Make sure you have not inadvertently switched your TV from the channel 3 or 4 setting if you are using another device to change channels. If you are using another device to control channels, be sure that you have pressed the FUNCTION button for that device. For example, if you are using your VCR to control channels, be sure to press the VCR/DVD FUNCTION button (page 4). ❏ I lost the remote control ❏ You can use the front panel controls to access your menus, change channels, adjust the volume, or change video inputs (page 2). Contact your nearest Sony Dealer to order a replacement, please call our Sony Direct Accessory and Part Center at 1-800-488-7669 (U.S. residents only). Other Information Programming the Remote Control Problem Possible Remedies More than one code is listed ❏ Try entering them one by one until you come to the correct code for your component. I entered the wrong code number ❏ If you enter a new code number, the code number you previously entered at that setting is erased. I cannot operate a component with the remote control ❏ Use the component's own remote control. When I changed the batteries, the code numbers changed back to the factory settings ❏ You must reprogram the remote control (page 5). 42 Video Problem Possible Remedies No picture, no sound ❏ ❏ ❏ Make sure the power cord is plugged in. If a red light is flashing on the front of your TV for more than a few minutes, disconnect and reconnect the power cord. If the problem continues, call your local service center. Check the TV/VIDEO setting: when watching TV, set it to TV; when watching video equipment, set it to VIDEO 1, 2, 3 or 4 (page 4). Try another channel to rule out station trouble. Poor or no picture, good sound ❏ ❏ ❏ Adjust the Picture setting in the Video menu (page 28). Adjust the Brightness setting in the Video menu (page 28). Check the antenna and/or cable connections (page 11). No color ❏ Adjust the Color setting in the Video menu (page 28). Only snow appears on the screen ❏ ❏ ❏ Check the Cable setting in the Channel menu (page 31). Check the antenna and/or cable connections (page 11). Make sure the channel selected is currently broadcasting. Dotted lines or stripes ❏ ❏ Adjust the antenna. Move the TV away from other electronic equipment. Some electronic equipment creates electrical noise, which can interfere with TV reception. Double images or ghosts ❏ Check your outdoor antenna or call your cable service. ❏ Audio Possible Remedies Good picture, no sound ❏ ❏ ❏ ❏ Low or no audio (TV and Cable box) ❏ Press so that Muting disappears from the screen (page 3). Check your Audio settings. Your TV may be set to Auto SAP in the MTS feature (page 29). Make sure the speaker option is set to On in the Audio Menu. Adjust TV's volume. Some cable boxes have volume level controls. Check and see if your cable box or cable box remote has a volume control. 43 Other Information Problem Channels Problem Possible Remedies ❏ I cannot receive ❏ higher number channels (UHF) when using an antenna Make sure Cable is set to Off in the Channel menu (page 31). Perform Auto Program to add channels that are not presently in the memory (page 23). ❏ ❏ Make sure Cable is set to On in the Channel menu (page 31). Perform Auto Program to add channels that are not presently in the memory (page 23). Cable stations don’t seem to work Contacting Sony Before calling our Customer Information Services Center, reset the TV to factory settings (see page 23). Please have your TV serial number ready. The number is located on the rear of your TV and on the front cover of this manual. Other Information Our Customer Information Services Center phone number is 1-877-899-SONY (7669) (US residents only) or (416) 499SONY (7669) (Canadian residents only). 44 Specifications Television system Channel coverage Antenna Picture tube Power requirements Supplied accessories Optional accessories American TV standard/NTSC VHF: 2-13/UHF: 14-69/CATV: 1-125 75-ohm external antenna terminal for VHF/UHF FD Trinitron® tube 120V, 60 Hz Size AA (R6) batteries (2) Remote Control RM-Y195 TV Stand: SU-27FS2 KV-27FS120 Screen size Inputs/outputs Speaker output Power consumption Dimensions (W/H/D) Mass Visible screen size: 679 mm (27 inches) measured diagonally Actual screen size: 736.6 mm (29 inches) measured diagonally Inputs 1 video, 1 audio (front) Outputs 2 video, 2 audio (rear) 1 AUDIO OUT 1 S VIDEO 1 RF 1 Y, PB, PR, 1 audio 10 W x 2 180 W in use less than 1 W in standby 768 x 589 x 497 mm (30 1/4 x 23 1/4 x 19 5/8 inches) 45.2 kg (99 lbs. 10 oz)5 Ibs. 6 oz.) Design and specifications are subject to change without notice. Other Information 45 Index 16:9 Enhanced 40 M A Manufacturer’s Codes 6 Menus Audio 29 Channel 31 Parent 33 Setup 40 Timer 39 Video 28 Mode Movie 28 Pro 28 Standard 28 Vivid 28 MTS Auto SAP 29 Mono 29 Stereo 29 Audio Out 30 Auto Program 23, 32 Auto SAP 29 B Balance 29 Bass 29 Batteries Inserting in remote 2 Brightness 28 C Cable 31 Caption Vision 40 Channel Fix 31 Channel Label 32 Channel Skip/Add 32 ClearEdge VM 28 Color 28 Connections Cable and antenna 11 Connecting a Camcorder 20 Connecting an Audio System 20 DVD Player using Component Video (Y, PB, PR/R, L) 19 DVD Player using Composite Video (VIDEO/AUDIO L(MONO),R) 19 TV and Satellite Receiver 16 TV and VCR 12 TV, VCR and Cable Box 14 TV, VCR, and Satellite Receiver using Component Video (Y, PB, PR) 18 TV, VCR, Cable/Antenna, and Satellite Receiver using Composite Video (VIDEO/AUDIO L(MONO), R) 17 VideoTape Editing (VCR or Camcorder) 21 Current Time 39 P Parental Control 34 Picture 28 Picture Control 28 Picture Controls Brightness 28 Color 28 Hue 28 Picture 28 Sharpness 28 Programming The Remote Control 42 R Remote Control Programming 5 S Setting the Rating English Rating 38 French Rating 38 Movie Rating 36 TV Rating 36 U.S.A. Rating 38 Unrated 37 SLEEP 3 Speaker 29 Specifications 45 Steady Sound 29 E Effect Off 29 SRS 29 Simulated 29 F Favorite Channels 31 T Tilt Correction 40 Timer 1 and Timer 2 39 Treble 29 Troubleshooting 41 TV Features 1 TV Front Panel 2 TV Rear Panel 9 H Hue 28 I Index 47 Info Banner 40 L Language 40 V Video Label 40 47 User Guide Sony Corporation Printed in U.S.A.