Download Samsung MAX-ZS530 Инструкция по использованию
Transcript
THREE-CD CHANGER MINI-COMPACT SYSTEM MP3-CD/CD-R/RW PLAYBACK MAX-ZS530 Instruction Manual Safety Warnings GB CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CLASS 1 LASER PRODUCT This Compact Disc player is classified as a CLASS 1 LASER product. 2 Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM. This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit. This symbol alerts you to important operating and maintenance instructions accompanying the unit. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. Thank you for buying this SAMSUNG mini-compact system. Contents Please take time to read these instructions. They will allow you to operate your system with ease and take full advantage of its features. SAFETY WARNINGS .................................................................................................................................................................................. 2 INSTALLING YOUR MINI-COMPACT SYSTEM Front Panel View ...................................................................................................................................................................................... 4 Remote Control ........................................................................................................................................................................................ 5 Rear Panel View ...................................................................................................................................................................................... 6 Where to Install Your Mini-Compact System............................................................................................................................................ 7 Connecting the Loudspeakers ................................................................................................................................................................ 7 Inserting Remote Control Batteries .......................................................................................................................................................... 7 Connecting the AM (MW) Aerial .............................................................................................................................................................. 8 Connecting the FM Aerial ........................................................................................................................................................................ 8 Connecting to an External Source .......................................................................................................................................................... 8 Connecting your System to the Power Supply ........................................................................................................................................ 9 Demo/Dimmer function ............................................................................................................................................................................ 9 Setting the Clock ...................................................................................................................................................................................... 9 CD/MP3-CD PLAYER Loading and Changing Compact Discs.................................................................................................................................................... 10 To replay the CD/MP3-CD........................................................................................................................................................................ 10 Selecting a CD in the Disc changer ........................................................................................................................................................ 11 Selecting a CD Track .............................................................................................................................................................................. 11 To select the MP3-CD title and track ...................................................................................................................................................... 11 Searching for a Specific Music Passage on a CD .................................................................................................................................. 12 Function to skip through 10 tracks at a time............................................................................................................................................ 13 Last Memory Function.............................................................................................................................................................................. 13 Shuffle Play Function .............................................................................................................................................................................. 13 Repeating One or All Tracks on the Compact Discs................................................................................................................................ 14 Programming the Order of CD Playback ................................................................................................................................................ 14 Checking or Changing Programmed CD Tracks...................................................................................................................................... 15 TUNER Searching for and Storing the Radio Stations ........................................................................................................................................ 15 Selecting a Stored Station........................................................................................................................................................................ 16 Improving Radio Reception...................................................................................................................................................................... 16 TAPE DECK Listening to a Cassette ............................................................................................................................................................................ 17 CD Synchro Record Feature.................................................................................................................................................................... 17 Recording a Compact Disc ...................................................................................................................................................................... 17 Recording a Radio Programme................................................................................................................................................................ 18 Copying a Cassette (Dubbing) ................................................................................................................................................................ 18 Tape Counter............................................................................................................................................................................................ 18 Selecting the cassette Playback Mode(Only for Deck 2) ........................................................................................................................ 18 OTHER FUNCTIONS Timer Function ........................................................................................................................................................................................ 19 Cancelling the Timer ................................................................................................................................................................................ 20 Mute Function .......................................................................................................................................................................................... 20 Selecting an Equalizer Preset .................................................................................................................................................................. 20 Power Sound Function ............................................................................................................................................................................ 20 Setting the System to Switch off Automatically ........................................................................................................................................ 21 Super Bass Sound .................................................................................................................................................................................. 21 Connecting Headphones.......................................................................................................................................................................... 21 Microphone Function(option).................................................................................................................................................................... 21 RECOMMENDATIONS FOR USE Safety Precautions .................................................................................................................................................................................. 22 Cleaning Your Mini-Compact System ...................................................................................................................................................... 22 Precautions When Using Compact Discs ................................................................................................................................................ 22 Precautions When Using Audio Cassettes .............................................................................................................................................. 23 Before Contacting the After-Sales Service .............................................................................................................................................. 23 Technical Specifications .......................................................................................................................................................................... 24 Symbols Press Push Important Note 3 GB Front Panel View GB 35 34 33 32 31 30 29 28 27 1 26 25 24 23 22 2 3 4 5 6 7 21 20 19 18 8 9 10 11 12 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 4 Standby/On Timer/Clock Timer On/Off AI Sleep Headphone Jack Connector Program button MIC Level(option) MIC Jack(option) CD Repeat Reverse Mode Deck 1/2 Cassette Deck 1 REC/Pause TAPE Normal Dubbing CD Synchro Recording Function Selection buttons Cassette Deck 2 Skip Function buttons 13 14 15 16 17 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. S.Bass Stop button EQ Preset Lambada EQ Preset Samba EQ Preset Salsa Enter Search Function buttons Volume Power Sound Compact Disc Compartment CD Open/Close Disc Change Disc Selection buttons Window Display Memory Function MP3-CD Track / Album Mode Selection Demo/Dimmer Remote Control GB 1 26 2 25 3 4 5 24 23 22 6 7 8 9 10 21 20 19 18 17 16 11 12 1. Standby/On 2. S.BASS 3. Latin Sound 4. TAPE Fast-Forward 5. TAPE Rewind 6. +10 7. Deck 1/2 8. CD Repeat 9. CD Stop 10. Program/Set/MP3-CD Last Memory 11. CD Track or Radio Station Search(Skip) 12. Mono/ST. 13. Tuner Band 15 14 13 14. Volume Descrease 15. Tuning Mode(MANUAL,PRESET) MP3-CD Track / Album Mode Selection 16. Volume Increase 17. Disc Skip 18. CD Play/Pause 19. CD Shuffle Play/ MP3-CD Random Play 20. Counter Reset 21. AI Sleep 22. TAPE Play 23. TAPE Stop 24. AUX 25. Timer On/Off 26. Mute 5 Rear Panel View GB 1 2 3 4 5 1. FM Aerial Connector Terminal 2. AM Aerial Connector Terminal 3. AUX-Input 4. Loudspeaker Connector Terminals 5. Voltage Selector(option) 6 Where to Install Your Mini-Compact System Inserting Remote Control Batteries GB To take full advantage of your new mini-compact system, follow these installation instructions before connecting the unit. Install the system on a flat, stable surface. Never place this unit on carpeting. Never place this unit in an outdoor area. Maintain an open space of approximately 6 inches (15 cm) on the sides and rear of the system, for ventilation purposes. Make sure that you have enough room to open the compact disc compartment easily. Place the loudspeakers at a reasonable distance on either side of the system to ensure good stereo sound. Direct the loudspeakers towards the listening area. For optimum performance, make sure that both speakers are placed at an equal distance above the floor. Insert or replace remote control batteries when you: Purchase the mini-compact system Find that the remote control is no longer operating correctly When replacing the batteries, use a new set of batteries and never mix alkaline and manganese batteries. 1 Place your thumb on the position marked on the battery compartment cover (rear of the remote control) and push the cover in the direction of the arrow. 2 Insert two AAA, LR03 or equivalent batteries, taking care to respect the polarities: + on the battery against + on the remote control – on the battery against - on the remote control 3 Replace the cover by sliding it back until it clicks into position. Connecting the Loudspeakers The loudspeaker connector terminals are located on the rear of the system. There are four terminals on the system: Two for the left speaker (marked L) Two for the right speaker (marked R) To achieve the correct sound quality, connect the: Red wire to the + terminals Black wire to the – terminals 1 2 3 Press and hold the terminal tab. Insert the speaker cord. Release the finger. L R 7 Connecting the AM (MW) Aerial GB The AM aerial (for medium wave) can be: Placed on a stable surface Fixed to the wall (you must first remove the base) The AM aerial connector terminals are located on the rear of the system and are marked AM . To avoid noise interference, check that the loudspeaker wires do not run close to the aerial wires. Always keep them at least 2 inches (5 cm) away. Connecting to an External Source The auxiliary input can be used to take advantage of the sound quality of your mini-compact system when listening to other sources. Examples: A television A video disc player A DAT or DCC cassette player A Hi-Fi stereo video cassette recorder To connect the external source, the source must have an audio output. In addition, you need an RCA connection cable. 1 Set the system to standby mode and disconnect it and the external source from the main. 2 Connect the audio cable to the rear of the mini-compact system. Connect the... Red jack White jack To the connector marked... R (right) L (left) For optimum sound quality, do not invert the right and left channels. 3 Plug the system back into the main socket and press Standby/On to switch it on. 4 5 6 Select the AUX source by pressing AUX on the front panel. Result: AUX is displayed. Switch the external source on. Adjust the volume and balance as required: Volume Equalizer Example: You can watch a film and take advantage of stereo sound provided that the original sound track is in stereo, (as if you were in a cinema). Connecting the FM Aerial How to connect a COAXIAL TYPE aerial. Connect a 75Ω antenna to the FM antenna terminal. Plug the connector on the FM aerial supplied into the coaxial socket (75Ω) marked FM on the rear of the system. Follow the instructions given on Page 15 to tune into a radio station, and determine the best position for the aerial. If reception is poor, you may need to install an outdoor aerial. To do so, connect an outdoor FM aerial to the FM socket on the rear of the system using a 75Ω coaxial cable (not supplied). 3 4 8 Connecting your System to the Power Supply Setting the Clock GB The main lead must be plugged into an appropriate socket. Before plugging your system into a main socket, you must check the voltage. 1 Your system is equipped with a clock which allows you to turn your system on and off automatically. You should set the clock: When you purchase the mini-compact system After a power failure After unplugging the unit Check the position of the voltage selector on the rear of the system For each step, you have a few seconds to set the required options. If you exceed this time, you must start again. (OPTIONAL). 2 Plug the main lead (marked AC Cord on the rear of the system) into an appropriate socket. 3 Press the On/Standby button to switch your mini-compact system . 1 2 Switch the system on by pressing Standby/on. Press Timer/Clock twice. Result: CLOCK is displayed. 3 Press Enter. Result: The hour flashes. 4 To... Press the... Increase the hours Decrease the hours Tuning Up Tuning Down 5 When the correct hour is displayed, press Enter. Result: The minutes flash. 6 To... Press the... Increase the minutes Decrease the minutes Tuning Up Tuning Down 7 When the correct time is displayed, press Enter. Result: The clock starts and is displayed, even when the system is in standby mode. You can display the time, even when you are using another function, by pressing Timer/Clock once. You can also use Program/Set button on the remote control to instead Enter button in step 3,5,7. Demo/Dimmer function All functions available on the system can be viewed on the display and the display's brightness can be switched between "on" and "off". 1 Press the Demo/Dimmer button. Result: All functions available on the system appear on the front panel display. 1 2 3,5,7 Each of these are explained in detail in this guide. Please refer to the relevant section. 2 3 Press the Demo/Dimmer button again. Result: The Dimmer function is selected and the display darkens. 4,6 4,6 Press the Demo/Dimmer button once again to brighten the front panel display. A display brightness control can only be performed while the system power is on. 9 Loading and Changing Compact Discs To replay the CD/MP3-CD GB The CD disc changer can contain up to three 12 cm or 8 cm compact discs without using an adapter. Never force the compact disc carrousel when opening and closing the compartment. This is a player that enables the playback of audio CD, CD-R, CD-RW and MP3-CD and does not possess the function that saves MP3 files. Do not use CDs of irregular shapes like heart or octagon shapes. The performance of the player may be degraded. Never press down or place objects on the carrousel. Always treat your compact discs with care; refer, if necessary, to the section entitled “Precautions When Using Compact Discs” on page 22. 1 2 Switch the system on by pressing Standby/on. 1 2 3 4 Press the Open/Close( ) button on the front panel. Result: The compartment opens. 3 At least more than one CD should be inserted for playbacks. Place one or two discs in the front slots of the carrousel, with the label on the discs facing upwards. Check that the compact disc has been correctly inserted in the holder before closing the compartment. 4 If you wish to load a third compact disc, press the Disc Change button on the front panel (or Disc Skip on the remote control). Result: The carrousel rotates by 120°. 5 Close the compartment by pressing the Open/Close( ) button again. If you wish to start playing a disc directly, you can also proceed as follows. To play... Press... Disc 1 CD ( ) or Disc 1 Disc 2 Disc 2 Disc 3 Disc 3 Result: The compartment closes automatically and the disc selected starts playing. 6 Press the CD( Insert more than one CD or a MP3-CD. Press the CD( remote control. ) button of the main unit or the <CD Playback> button of the <During the MP3-CD playback> 1 2 3 1 2 3 Track Indicator Track Indicator Playtime Indicator 5 6 If it is desired to stop while the playback is processing, press the CD( ) button. Press the CD( 7 Title(Directory) Indicator Playtime Indicator Adjust the volume according to needs with the following procedures. Turn the Volume control of the main unit. or Press the VOL. + or – button of the remote control. You can load or unload compact discs when the radio, tape or auxiliary source function is selected. 5 ) of the main unit to select the CD function. If there is more than one CD or an MP3-CD inserted, replays are then processed in order. Your CD Player will take a few moments to scan through all the tracks recorded on a particular MP3-CD. The English name of the song may be indicated on the display only if directly downloaded from the PC or if the purchased MP3-CD is sorted according to titles(directory). (Other languages besides English may not be indicated.) The English name of the track may not be indicated depending on the characteristics of the MP3-CD. To change or unload the compact disc changer, repeat Steps 2 to 5. Keep the compartment closed whenever you are not using it, to prevent dust from entering. Press the On/Standby button to switch on the power. ) button once again to playback again. To stop playback, press the button. A new disc may be inserted in the remaining two compartments excluding the CD which is being played back. Press the Disc Changer button to open the CD tray. The revolving part does not turn during playbacks. If there is not even one CD inserted in the CD tray, it is indicated as “NO DISC”. If the CD Repeat function is not selected, 3 CDs are played back which automatically stops. 4 2,5 1 5 1 5 2,4,6 10 7 Selecting a CD in the Disc changer To select the MP3-CD title and track GB The CD function is automatically selected when Disc Skip is pushed. To select a specific disc, press the corresponding Disc (1, 2, 3) button on the front panel or Disc Skip on the remote control, until the required disc indicator flashes. Result: All the discs will be played in turn, starting with the one selected. If you wish to play the current disc only, press Repeat on the front panel one or more times, until 1 CD is displayed. If you use the Disc (1, 2, 3) function when listening to the radio or to a tape, the system switches automatically to the CD mode. If the disc selected is not loaded, the next disc is played automatically. The title and track of the MP3-CD desired to listen may be selected on stopping or during playbacks. Main Unit To move the title(directory), press the , button. 1 2 3 Title Movement To move the track, press the , button. Moves the track within the title. If the , button is pressed more than the number of tracks within the title, it moves to the next title. 1 2 3 Track Movement Selecting a CD Track You can select the track you wish to listen to, either when the compact disc player is stopped or when a disc is playing. To start playback at the beginning of the... Press the and ... Next track Press once Current track Press once Previous track Press twice The appropriate number of pressing the and . Track of your choice Remote Control Press the Tune/CD Mode button, then select ‘Title’ or ‘Track’ and press the , button. If ‘Title’ is selected in the display, the title moves. If ‘Track’ is selected in the display, the track moves. 11 Searching for a Specific Music Passage on a CD GB When listening to a compact disc, you can quickly search for a specific music passage on a track. What is MP3? MP3 means MPEG1 Layer 3, the global standard for audio signal compression technology. It uses digital compression technology to compress original sound data by up to 12 times without sound quality degradation. The unit will playback files created in MP3 format (Mpeg1.Layer3) with *.mp3 as their extension. Files created in MP2 format (Mpeg1.Layer2) with *.mp2 as their extension can also be played back. How many MP3 files can a CD-R or CD-RW disc record? The maximum capacity of one CD-R or CD-RW disc is 680MB. Normally, one MP3 file has a capacity of 4MB, therefore approximately 170 files can be recorded on a single disc. Regarding the playback of CD-R/RW In the case of an original CD-R(Recordable) recorded in audio CD format, CD-RW(Rewitable) and editing by the user, playback is processed on the respective completed status. (The player may not be played back according to the characteristics of the CD or recorded status.) The CD-RW is comparably less reflexive than CD which causes more time delay to read. Playback sequence of titles and tracks In case of Window Explorer display. The arrows indicates playback sequence of titles and tracks. Tracks with jpg, wav or doc only are not audio files and therefore will be skipped. TITLE 01 Skipped Kevin01.mp3 Kevin02.mp3 Kevin03.mp3 Kevin04.mp3 Kevin.jpg Life.doc TITLE 02 TITLE 04 Summer05.mp3 Summer06.mp3 Garden.mp3 Garden.mp3 TITLE 03 TITLE 05 Michael07.mp3 Michael08.mp3 Water.mp3 Water.mp3 Skipped TITLE 06 Kenny01.wav Kenny02.wav 12 To search through the tracks... Press and hold down... Forwards Backwards File Compatibility (E) CD-ROM drive It is recommended that you turn the volume down before using this function. TITLE 07 Butterfly.mp3 Piano14.mp3 John15.mp3 You can aslo press and hold down search through the tracks. for at least one second for at least one second / on the front panel to auto Function to skip through 10 tracks at a time Shuffle Play Function Press the +10 button briefly while playing back a CD. The track 10 tracks after the current one will then be played back. Example: If you want to select track 43 during playback of track 15, press the +10 button three times, and then press the button three times. GB You can listen to the tracks on a compact disc in a different order each time, as the various tracks will be selected automatically in a random sequence. 1 15 ➝ 20 ➝ 30 ➝ 40 ➝ 41 ➝ 42 ➝ 43 +10 +10 2 When playing tracks in a random order, you can: Move on to the next track (selected at random) by pressing Search quickly for a specific point in the current track by pressing more than one second. 3 When you have finished the random playback, press Shuffle button again. +10 CD CD CD Last Memory Function Press the Shuffle button. Result: The SHUFFLE(CD) or RANDOM(MP3-CD) indication appears and all the tracks are played in a random order. Both the track number and the playing time are displayed. or press the Repeat and CD Synchro function are not availabe in Shuffle playing mode. *This function is only available during playback of an MP3-CD. When CD playback is selected again after your CD player has been stopped or turned off, this function allows playback from the start of the track that you last listened to. Press the Program/Set button while your MP-3 CD is being played back. The LAST ON and OFF may be repeatedly selected. 3 2 1,3 2 13 Repeating One or All Tracks on the Compact Discs GB 7 8 You can repeat indefinitely: A specific track on a compact disc. All tracks on the compact disc selected. All discs loaded in the carrousel 1 To repeat... Press Repeat on the Front Panel one or more times until... REPEAT 1 is displayed REPEAT 1 CD is displayed REPEAT ALL CD is displayed The current track indefinitely The selected disc All discs loaded 2 9 To select other tracks, repeat Steps 4 to 6. Press CD ( grammed. ) to listen to the track selection in the order pro- To... Press the Listen to the current track again Listen to the previous track Listen to the next track Skip forwards or backwards one or more tracks Press once Press twice Press once The appropriate number of pressing the and and ... When you wish to stop the Repeat function, press Repeat until ALL CD or 1 CD is displayed, or press cancel the selection, press . 10 To Once if the compact disc player is stopped . Result: PRGM is no longer displayed. If you open the compartment, the selection is cancelled. If you select the number of a disc which is not loaded or a track which does not exist on the CD, the selection skips to the next programmed track. 4 Programming the Order of CD Playback You can decide: The order in which you listen to the tracks on the discs loaded Which tracks you do not wish to listen to You can programme up to 24 tracks. You must stop the compact disc player before selecting the tracks. This feature can be combined with the Repeat function. 1 2 3 If the CD function is selected, stop the player by pressing . 3,6 5,9 Press Program. Result: The following indications are displayed: 4 If necessary, select the disc containing the required track by pressing the corresponding Disc (1, 2, 3) button. 5 Select the required track by pressing the Up and Down button: Press to move back through the tracks Press to move forward through the tracks Press Program to confirm your selection. Result: The selection is stored and 14 1,10 Load the selected CDs. (01 = Programme No, DI = Disc No, – – = Track No on the disc) 6 8 is displayed. 5, 9 Searching for and Storing the Radio Stations Checking or Changing Programmed Tracks GB You can check or change your selection of tracks at any time. 1 2 Press You can store up to: 15 FM stations 15 AM stations (8 MW stations,7 LW stations ) once if you have started listening to the selection. Press Program. Result: The following indications appear: (CH = Check, 01=Program No, DI = Disc No, – – = Track No on the disc) If you have already programmed 24 tracks, CH is displayed instead of PR when you press Program. 3 Press Program again. Result: The first track selected is displayed, together with the letter CH(Change). 4 Press Program one or more times until the track to be changed is displayed. 5 If necessary, press the corresponding Disc (1, 2, 3) button to change discs. 6 7 8 Press / 1 2 3 4 to select a different track. Switch the system on by pressing Standby/on. Select the TUNER function by pressing TUNER . Select the required frequency band by pressing TUNER (Band) again on the front panel or TUNER (Band) on the remote control. Result: The appropriate indication is displayed: FM Frequency Modulation AM(MW) Medium Wave LW(Option) Long Wave Tune in to the desired station. Manual tuning Press the Tuning Mode button so that the "MANUAL" indicator lights up on the front panel display. Press / on the main unit to tune in to the desired station manually. or Press Tuning or on the remote control to do the same. Press Program to confirm your change. Press CD ( ) to start listening to the selection. Result: The first track selected is played. Automatic tuning Press and hold / on the main unit for more than 1 second so that the "AUTO" indicator lights up on the front panel display. Press and briefly hold / on the main unit to begin automatic tuning. or Press and briefly hold Tuning or on the remote control to do the same. 5 Use the manual tuning method if the automatic tuning search does not stop at the desired station because the signal is weak. For details on the Preset function, see the “Selecting a Stored Station” on page 16. 8 2,3,4,7 1 5 Adjust the volume by: Turning the Volume knob on the front panel or Pressing the VOL. + or – buttons on the remote control 6 Select the FM stereo or mono mode by pressing Mono/ST. on the remote control. 6 6 5 1 1 2,3 8 4 2,3,4,7 5 6 6 4 4 4 5 6 3 15 Searching for and Storing the Radio Stations (continued) Selecting a Stored Station GB 7 If you do not want to store the radio station found, revert to Step 4 and search for another station. Otherwise: a Press Memory. Result: The PRGM is displayed for a few seconds. b Press Tuning Down and Up to assign a programme number between 1 and 15. c Press Memory to store the radio station. Result: PRGM is no longer displayed and the station is stored. 8 To store any other radio frequencies required, repeat Steps 3 to 7. The PROGRAM function can be used to assign a new station to an existing programme number. 7 7 You can listen to a stored radio station as follows: 1 2 3 4 5 Switch the system on by pressing Standby/on. Select the TUNER function by pressing TUNER . Select the required frequency band by pressing TUNER (Band) on the remote control or TUNER (Band) again on the front panel. Press button on the front panel of the unit, or the Tune/CD / Mode button on the remote control until “PRESET” is displayed. press on the front panel of the unit to select the desired / station. or Select the desired station by pressing the station number stored, using the Tuning or button on the remote control. Result: The desired station is now received. 7 1 5 4 5 2,3 In Tuner Mode In manual tuning mode, you can use / button to manual search a radio station. During Tuner auto searching, press button to stop auto searching. In Preset tuning mode, you can use / button to search a stored radio station. you can use Program /Set button on the remote control to instead Memory button in step 7. 16 Improving Radio Reception You can improve the quality of radio reception by: Rotating the FM or AM(MW) aerial Testing the positions of the FM and AM(MW) aerials before fixing them permanently If reception from a specific FM radio station is poor, press Mono/ST. on the remote control to switch from stereo mode to mono. The quality of the sound will be improved. Listening to a Cassette CD Synchro Record Feature GB Always treat your cassettes with care; refer, if necessary, to the section entitled “Precautions When Using Audio Cassettes” on page 23. 1 2 3 Switch the system on by pressing the Standby/On button. 4 Insert the pre-recorded cassette with the open edge of the tape facing downward. 5 Close the deck by pushing on it until it clicks into place. Result: Depending on the deck selected, the 1 or 2 indication is displayed in front of the counter number. You can record a compact disc on a cassette in two different ways: Synchronised recording Direct recording This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice. CD Synchro recording not function for MP3-CD Select the TAPE function by pressing TAPE. Open either cassette deck 1 or 2 by pushing and releasing the deck cover where Push Eject ( ) is written. If you insert a cassette in both decks, the system selects the deck in which you inserted the second cassette. 1 2 3 4 5 6 7 Switch the system on by pressing Standby/On. Insert a blank cassette in Deck 2. Select the CD function by pressing CD on the front panel. Load a compact disc. Select the required disc. Select the required track and press CD Synchro or press CD Synchro directly to start recording at the beginning of the disc. Result: “REC” and “CD SYNC” are displayed and recording starts. To stop... Press ... Recording and playing the compact disc 6 If you have inserted two cassettes, press Deck 1/2 on the front panel or directly the Deck 1/2 button on the remote control to select the cassette to be played. 1 Result: Depending on the deck selected, the TAPE 1 or TAPE 2 indication is displayed. 7 To listen to... Side A TAPE ( ) once Side B TAPE ( ) twice Result: The cassette starts playing. Press ... Deck 1 and Deck 2 Deck 2 only 3 6 When the cassette is stopped, select one of the following functions as required. 8 To... Rewind the cassette 7 Press ... Recording a Compact Disc Fast-forward the cassette 9 When you have finished this function, press TAPE control or on the front panel to stop . on the remote The direct recording mode enables you to start recording with any track on the compact disc. You can only record on cassettes in Deck 2. You do not need to adjust the volume, as it has no effect on the recording. 1 1 2 3 4 5 6 Switch your system on by pressing Standby/On. 7 Press the REC/Pause. Result: REC is displayed . 8 Press the to start playing the track. Result: The track is recorded on the cassette. 9 When you have finished recording, press TAPE control or on the front panel to stop recording. 8 2,7 6 8 9 Insert a blank cassette in Deck 2. Select the CD function by pressing CD on the front panel. Load the compact disc. Select the required disc. Select the required track on the compact disc and press on the front panel or on the remote control to set the compact disc player to Pause mode. on the remote 1 3,6,8 9 7 17 Recording a Radio Programme GB You can record a radio programme of your choice. 5 You can only record on cassettes in Deck 2. Press on the front panel or TAPE you have finished recording. on the remote control when You do not need to adjust the volume, as it has no effect on the recording. 1 Switch the system on by pressing Standby/On. 2 Insert a blank cassette in Deck 2. 3 Select the TUNER function by pressing TUNER . 4 Select the radio station that you wish to record by pressing Tuning 1 or on the remote control or by press the Tuning Down or Up on the front panel. 5 Press REC/Pause. 5 4 Result: REC is displayed in red and recording starts. 6 When you have finished recording, press the TAPE remote control or on the on the front panel to stop recording. Tape Counter When playing a cassette, a counter is displayed to enable you to take note of the counter value at the start of each track and thus start playback at the beginning of the track to which you wish to listen. 1 3 4 4 The counter is only displayed when a cassette is being played. Before starting to record a cassette for which you wish to take note of the counter values at the beginning of each track, reset the counter by pressing Counter Reset. 6 5 4 4 Selecting the Cassette Playback Mode(only for Deck 2) Copying a Cassette (Dubbing) You can copy a cassette from Deck 1 to Deck 2. Normal speed dubbing You do not need to adjust the volume, as it has no effect on the recording. Take care not to insert the tape to be copied in Deck 2, as it will be erased when you start recording. 1 2 3 4 Switch your system on by pressing Standby/On. When the display indicates... The mini-compact system plays back... One side of the selected cassette and then stops. One side of the cassette. The other side of the cassette and then stops. Both sides of the cassette indefinitely Insert a blank cassette in Deck 2. until you press stop. Insert the tape to be copied in Deck 1. To copy a cassette at... Press... Normal speed dubbing Dubbing Result: The appropriate indications are displayed and the cassette in Deck 1 is copied to the cassette in Deck 2. 18 Your mini-compact system has three cassette playback modes which enable you to listen to both sides of a cassette automatically. Press REV. Mode until the appropriate symbol is displayed. Timer Function GB The timer enables you to switch the system on or off at specific times. Example: You wish to wake up to music every morning. If the timer switch on and off times are identical, the word ERROR is displayed. If you no longer want the system to be switched on or off automatically, you must cancel the timer. Before setting the timer, check that the current time is correct. For each step, you have a few seconds to set the required options. If you exceed this time, you must start again. 1 2 3 4 5 2 3,4,5,6,7,8 Switch the system on by pressing Standby/On. TIMER is displayed. Press Timer/Clock until Press Enter. Result: ON TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch-on time already set; you can set the timer switch-on time. 4,5,6,7 Set the timer switch-on time. 4,5,6,7 a Set the hour by pressing the buttons. b Press Enter. Result: The minutes flash. c Set the minutes by pressing the d Press Enter. Result: OFF TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch-off time already set; you can now set the timer switch-off time. / To set the timer function buttons. / You can also use Program/Set button on the remote control to instead Enter button in step 3,4,5,6,7,8. Set the timer switch-off time. a Set the hour by pressing the b Press Enter. Result: The minutes flash. buttons. c Set the minutes by pressing the d Press Enter. Result: VOL XX is displayed, where XX corresponds to the volume already set. / buttons. / 6 Press Tuning Down and Up to adjust the volume level and press Enter. Result: The source to be selected is displayed. 7 pressing the / buttons to select the source to be played when the system switches on . If you select... You must also... TAPE (cassette) Insert a recorded cassette in one of the decks before setting the system to standby. TUNER (radio) a Press Enter. b Select a preset station by pressing the / CD (compact disc) 8 9 1,9 buttons. Load one or more compact discs. Press Enter to confirm the timer. Press Standby/On to set the system to standby mode. Result: appears on the front panel display next to the time, indicating the timer has been set. The timer automatically turns the system on or off at a designated time. 19 Cancelling the Timer GB Selecting an Equalizer Preset After having set the timer, it will start automatically as shown by the TIMER indication on the display. If you no longer wish to use the timer, you must cancel it. Your mini-compact system is equipped with a preset equalizer that allows you to choose the most appropriate balance between treble and bass frequencies, according to the type of music you are listening to. You can stop the timer at any time (system on or in standby mode). To... Press Timer-On/Off... Cancel the timer Once. Result: is no longer displayed. Restart the timer Twice. Result: is displayed again. Mute Function You can turn the sound off temporarily on your system. Example: You wish to answer a telephone call. 1 2 20 Press Mute. To switch the sound back on (at the same volume as before), press Mute again or the Volume buttons. Press EQ Preset (Salsa/Samba/Lambada) on the front panel or Latin Sound on the remote control until the required option is selected. To obtain a... Select... Normal balance (linear) Balance suitable for Salsa music Balance suitable for Samba music Balance suitable for Lambada music PASS SALSA SAMBA LAMBADA Power Sound Function Your mini-compact system is equipped with the function of Power Sound . The function of Power Sound amplifies bass and improves high key or bass twice as much for you to appreciate powerful real sound. 1 Press the P.Sound button on the front panel. Result: Press P.Sound button on the front panel, “P,SOUND” is displayed. 2 To cancel this function, press P.Sound button again . Setting the System to Switch off Automatically Connecting Headphones GB While listening to a compact disc or a cassette, you can set the system to switch off automatically Example: You wish to go to sleep to music. You can connect a set of headphones to your mini-compact system so that you can listen to music or radio programmers without disturbing other people in the room. The earphones must have a 3.5 ø jack or an appropriate adapter. 1 Connect the headphones to the Phones jack on the front panel. Result: The loudspeakers are no longer used to output the sound. Press AI Sleep. Result: playback starts and the following indications are displayed: Prolonged use of headphones at a high volume may damage your hearing. 90 MIN 2 Press AI Sleep one or more times to indicate how long the system should continue playing before it switches off: At any time, you can: Check the remaining time by pressing AI Sleep Change the remaining time by repeating Steps 1 and 2 3 Press AI Sleep one or more times until AI SLEEP is displayed. Result: The system will automatically switch off at the end of disc or cassette. 4 To cancel SLEEP or AI OFF function, press AI Sleep one or more times until OFF is displayed. Microphone Function(option) The microphone enables the user to mix in his or her vocals to sing-along with the music or recording . Preparation Plug the microphone with a 6.3mm mic jack into microphone terminal. 1 Turn the MIC Level. knob to adjust the mic volume. Super Bass Sound Your mini-compact system has a bass amplification function called SBS (Super Bass Sound). This function makes the sound more powerful and real. 1 Press the S. Bass button on the front panel. Result: S. BASS is displayed and “SBS ON” is displayed for a few seconds. 2 To cancel this function, press S. Bass again, “OFF” is displayed for a few seconds. 21 Cleaning Your Mini-Compact System Safety Precautions GB The following diagrams illustrate the precautions to be taken when using or moving your mini-compact system. To obtain the best possible results from your mini-compact system, you must clean the following elements regularly: The outer casing The compact disc player The cassette players (heads, rollers and drive capstans) Always unplug the system from the wall outlet: Before cleaning it If you are not going to be using it for a long time Outer Casing Clean the outer casing regularly using a soft cloth and a light detergent. Do not use abrasive powders, liquids or aerosol cleaners. Never let any liquids get into the system. Ambient operating conditions: Ambient temperature 5°C-35°C Humidity 10-75% Do not expose the unit to direct sun radiation or other heat sources. This could lead to overheating and malfunction of the unit. Compact Disc Player 1 Before playing a compact disc, clean it with a special CD cleaning agent. Do not use the same cleaning agents as for vinyl LP records. Carefully wipe the disc from the centre outward. 2 Regularly clean the player with a special cleaning disc (available from your local dealer). Tape Decks Press Push Eject ( 1 2 Do not place potted plants or vases on top of the unit. Moisture entering the unit could lead to dangerous electric shock and can cause equipment damage. In such events immediately disconnect the main plug from the socket. During thunderstorms, disconnect the main plug from the socket. Main voltage peaks due to lightning could damage the unit. ) to open the cassette deck. Use a cotton bud and a special cassette cleaning agent to clean the: Head (1) Rollers (2) Drive capstans (3) If you will not be using the remote control for a long time, remove the batteries to prevent corrosion. Although your system is very hard-wearing, it should not be used in an excessively dusty environment or subjected to shocks or extreme heat (close to heating appliances or in direct sunlight, etc.). If the unit emits an unpleasant odor when in use, unplug it from the main supply and contact the after-sales service. 3 VOLUME UP DOWN 1 Remove the batteries from the remote control, if not used for any extended periods. Leaking batteries can cause serious damage to the remote control. When using headphones, take care not to listen at excessive volumes. Extended use of headphones at high volumes will lead to hearing damage. 2 Precautions When Using Compact Discs Handle your compact discs with care. Always hold them by the edges to avoid leaving fingerprints on the shiny surface. When you have finished playing a compact disc, always put it back in its case. Do not fix paper or adhesive tape to the discs and do not write on the label. Clean them with a special-purpose cloth. Store your compact discs in a clean place, out of direct sunlight, where they will not be exposed to high temperatures. Always use compact discs marked . COMPACT DIGITAL AUDIO Do not place heavy items on the main lead. Main cable damage can lead to damage of the equipment (fire hazard) and can cause electric shock. 22 Do not remove any equipment panels. The inside of the unit contains live components, which cause electric shock. Precautions When Using Audio Cassettes Before Contacting the After-Sales Service GB Check that the tape in the cassette is sufficiently taught. To prevent erasing a cassette that you wish to keep, remove the safety tab on the upper edge of the cassette. To record a cassette, where the tab has been broken, simply cover the opening with adhesive tape. When you have finished playing a cassette, always put it back in its case. Store your cassettes in a clean place, out of direct sunlight, where they will not be exposed to high temperatures. Avoid using 120-minute cassettes as they place unnecessary strain on the tape mechanism. It always takes a little time to become familiar with a new appliance. If you have any of the problems listed below, try the solutions given. They may save you the time and inconvenience of an unnecessary service call. Problem The system does not work G E N E R A L There is no sound The Timer does not work System still doesn’t work, even after following steps above. Checks/Explanation • The main lead is not correctly plugged into a wall socket or the wall socket is not switched on. • The remote control batteries need replacing or the polarity has not been respected. • The Standby/On button has not been pressed. • The volume has been completely turned down. • The correct function (TUNER, CD, TAPE, AUX) has not been selected. • You have connected a set of earphones. • The loudspeaker wires have been disconnected. • The MUTE button has been pressed. • The timer has been stopped by pressing TIMER ON/OFF. • Press the S.Bass button for 5 seconds in power ‘OFF’(standby), the system is returned the original position (RESET) C D C A S S E T T E S R A D I O The compact disc player does not start playing The tape does not start playing The volume falls off The cassette is not erased correctly There is excessive wow and flutter Reception is poor or no radio stations are received at all • The CD function has not been selected. • The disc has been inserted face down or is either dirty or scratched. • The laser sensor is dirty or dusty. • The system has not been installed on a flat, horizontal surface. • Condensation has formed in the player; leave the system in a warm, airy room for at least one hour. • The TAPE function has not been selected. • The cassette has not been inserted correctly. • The cassette player has not been closed. • The tape is either slack or broken. • The audio heads are dirty. • The rollers or drive capstans are dirty. • The tape is worn. • The TUNER function has not been selected. • The radio frequency has not been correctly selected. • The aerial has been disconnected or is not facing the right way. Turn it until you find the best orientation. • You are in a building that blocks radio waves; you must use an outside aerial. If the above guidelines do not allow you to solve the problem, take a note of: The model and serial numbers, normally printed on the rear of the system Your warranty details A clear description of the problem Then contact your local dealer or SAMSUNG after-sales service. 23 Technical Specifications GB SAMSUNG strives to improve its products at all times. Both the design specifications and these user instructions are thus subject to change without notice. RADIO LW(option) Usable sensitivity AM (MW) Signal/noise ratio Usable sensitivity Total harmonic distortion FM Signal/noise ratio Usable sensitivity Total harmonic distortion 60 dB 40 dB 54 dB 2% 62 dB 10 dB 0.3 % COMPACT DISC PLAYER Capacity Frequency range Signal/noise ratio Distortion Channel separation Disc sizes 3 discs 20 Hz - 20 KHz (± 1 dB) 90 dB (at 1 KHz) with filter 0.05 % (at 1 KHz) 74 dB Diameter: 120 or 80 mm. Thickness: 1.2 mm TAPE DECK Frequency range Signal/noise ratio Channel separation Erasing effect 125 Hz ~ 8 KHz 40 dB 35 dB 50 dB AMPLIFIER Output power (6 Ω) Channel separation Signal/noise ratio 35 Watts/CH RMS,IEC (total harmonic distortion: 10 %) 45 dB 75 dB GENERAL Dimensions 270 (W) x 317 (H) x 370 (D) mm 24 THIS APPLIANCE IS MANUFACTURED BY: ELECTRONICS AH68-01230L