Transcript
www.ronda-startech.com 60 30 Cal. 5030.D 20 45 10 10 8 12 6 11/2007 Ronda aG CH-4415 Lausen/Switzerland 15 30 2 21 4 Battery type: 395 (diameter 9.5mm x 2.6mm / SR 927 SW) Accuracy: +20 / -10 seconds per month English User’s Manual In case your watch needs to be repaired or to raise claims under a guarantee, please contact the point of sales Description of the display and control buttons Minute counter (Start / Stop / Reset) Control buttons 20 45 10 Second hand 10 8 Minute hand Push button A Hour hand 60 30 20 Centre stop-second 10 Minute counter 45 10 8 12 6 15 Example: 15 Start: Press push-button A. 30 12 21 2 Stop: to stop the timing, press push- button A once more and read the three chronograph hands: 1h / 20min / 10 sec. 4 6 Hour counter Crown 30 2 60 30 Display elements Chronograph: Basic function Push-button A Zero positioning: 21 Push button B 4 Hour counter 20 Press push-button B. (The three chronograph hands will be reset to their zero positions). 60 30 45 10 10 Date 8 15 30 12 21 2 4 6 Push-button B Chronograph: Accumulated timing Minute counter Push-button A 60 30 20 45 10 10 12 8 Example: Start: (start timing) 15 Stop: (e.g. 15 min 5 sec following ) Restart: (timing is resumed) * Stop: (e.g. 13 min 5 sec following ) 30 21 2 4 6 = 28 min 10 sec Hour counter Minute counter 60 30 20 45 10 10 8 Chronograph: Intermediate or interval timing Push-button A Example: Start: (start timing) Display interval: e.g. 10 minutes 10 seconds (timing continues in the background) * Making up the measured time: (the 3 chronograph hands are quickly advanced to the ongoing measured time). Stop: (Final time is displayed) Reset: The 3 chronograph hands are returned to their zero position 15 30 12 21 2 4 6 Hour counter Push-button B (The accumulated measured time is shown) Reset: 20 The three chronograph hands are returned to their zero positions. 60 30 45 10 10 Please note: * Following , the accumulation of the timing can be continued by pressing pushbutton A (Restart / Stop, Restart / Stop, …) 30 12 8 15 21 2 4 6 Push-button B Minute counter 20 45 10 10 8 15 30 12 I 21 2 II III 4 6 8 20 45 10 10 30 12 8 8 Push-button B 20 Second hand Returning the crown to position I III II hand Control buttons Termination of the chronograph hands adjustment Push button A (can30be carried out at any time). 60 20 45 10 45 10 10 20 I 21 2 II III 45 10 Turn the crown until you reach the correct 4 6 8 time 8:45. 60 45 10 10 8 15 30 12 I 21 2 II III 4 6 Please note: * In order to set the time to the exact second, must be pulled out when the second hand is in position «60» (I). Once the hour and minute hands have been set, must be pushed back into position I at the exact second. I 31 45 12 60 10 8 15 6 20 45 10 10 8 12 6 Example: – Date / time on the watch: 17 / 1:25 AM 4 / 8:30 PM – Present date / time: 15 30 17 2 I II I 12 Date 4 (the watch continues to run). 45 2 8 4 6 3 60 45 10 8 12 6 15 4 3 I II Center II III stop-second I 45 10 12 6 45 10 10 12 I 21 2 II III 4 Push-button A 30 I 4 2 4 6 20 10 II III 60 45 10 8 User Manual Chronograph model 505-2 20 Press push-button B. (The three chronograph hands will to their zero positions). 60 30 45 10 8 12 6 15 30 21 2 4 Push-button B 12 6 15 30 2 Minute counter Please note: * Following , the accumulation of the timing can be continued by pressing pushbutton A (Restart / Stop, Restart / Stop, …) Push-button A 45 10 10 8 12 6 15 30 21 2 4 Hour counter Push-button B 60 30 20 60 30 20 45 10 10 8 12 6 Chronograph: Intermediate or interval ti Example: Start: (start timing) Display interval: e.g. 10 minutes 10 seconds (timi continues in the background) * Making up the measured time: (the 3 chronograph hands are quic advanced to the ongoing measure Stop: (Final time is displayed) Reset: The 3 chronograph hands are retur their zero position 15 Please note: * Following , further intervals or int mediates can be displayed by pressi push-button B (display interval / m measured time, ...) 30 21 2 4 Push-button B 21 A the chronograph **Adjusting Turn the crown until the correct date hands to zero position 4 appears. or several chronograph hands arethe not in **One Continue to turn the crown until 15 30 15 30 8 button A once more and read the t chronograph hands: 1h / 20min / 1 Example: 60 30 Hour counter 60 30 20 30 2 appears 3 . Stop: to stop the timing, press pus 4 (the watch stops). 8 Start: Press push-button A. 21 **Pull out the crown to position III 15 30 Minute counter 12 10 Turn the crown until yesterday’s date 10 10 30 21 60 30 10 6 Example: 30 2 Hour counter to their zero positions. 15 Push-button B 20 20 Please note: (Thechanging accumulatedphase measured time is shown) During the date between 9 PM 12 PM; the date must be set to the and Reset: date of The the three following day. hands are returned chronograph II 30 2 Example: Push the crown back into position I. Start: (start timing) = 28 min 10 sec 60 45 10 8 Pull out the crown to position II 4 21 4 Second6hand 20 8 12 Zero positioning: Stop: (e.g. 15 min 5 sec following ) Restart: (timing is resumed) * Stop: (e.g. 13 min 5 sec following ) 4 6 15 2 Hour2 counter 1 10 Crown 10 Push button B Chronograph: Accumulated timing 30 30 60 10 15 Crown date 1 appears. 30 12 Setting the date/time following a battery change 45 II 60 45 10 10 20 Turn the crown until the correct 10 30 8 4 Chronograph: Basic funct (Start / Stop / Reset) continues to run). 4 30 20 21 Push-button A 60 30 Pull out the crown to position II (the watch 15 2 6 20 30 6 Minute counter Push-button A 20 30 15 30 2 Minute counter 30 12 * Push the crown back into position I. 20 In case your watch needs to be repaired or to raise claims under a guarantee, please contact the point of sales 10 60 10 12 Setting the date (quick mode) Date 30 (the watch stops). 15 8 Hour counter 30 12 8 Minute counter * Pull out the crown to position III Battery type: 395 (diameter 9.5mm x 2.6mm / SR 927 SW) Accuracy: +20 / -10 seconds per month 1 x short long Display elements Hour hand Setting the time A A Single step Continuous 10 60 4 Adjusting the hour counter hand (position 6h) Single step 1 x short A Continuous long A Centre stop-second 30 6 Adjusting the next hand B B I Minute Second hand www.ronda-startech.com 60 30 Description of the display and Adjusting thecontrol minute buttons counter hand (position 9h) A 4 6 Ronda aG CH-4415 Lausen/Switzerland Adjusting the centre stop second 45 15 20 10 Single step 1 x short A 30 12 Continuous 10 A2 21 long Adjusting the next hand B English User’s Manual III 21 2 A simultaneously for at least 2 seconds (the centre stop-second rotates by 360° corrective mode is activated). 15 Keep push-buttons A and B depressed 6 B Push-button A 60 4 A chronograph hands are in their correct or incorrect zero position). 30 Please note: * Following , further intervals or intermediates can be displayed by pressing push-button B (display interval / make up measured time, ...) 21 2 Cal. 5030.D Pull out the crown to position III (all 3 Hour counter 15 30 12 Push-button B Example: One or several chronograph hands are not in their correct zero positions and have to be adjusted (e.g. following a battery change). 60 30 45 10 10 Adjusting the chronograph hands to zero position Center stop-second 60 30 20 III Adjusting the next hand B B their correct zero positions and have to be correct time 8:30 PM appears. adjusted (e.g. following a battery change). A ** Push back into position Pullthe outcrown the crown to position III (all 3I. chronograph hands are in their correct or incorrect zero position). A I Second hand Adjusting the minute counter hand (pos 1 x short Single step A Continuous long A Returning the crown to position I 4 Push-button B Adjusting the hour counter hand (positio Single step 1 x short A Continuous long A Adjusting the next hand B B Keep Please note: push-buttons A and B depressed least 2second, seconds **To setsimultaneously your watch to for theatexact (the centre stop-second by «setting please refer to the chapterrotates entitled 360° the time». corrective mode is activated). observe the AM/PM clock rhythm. **Please Adjusting the centre stop second Single step 1 x short A Continuous long A II III Termination of the chronograph hands adjust (can be carried out at any time). See more: www.christinadesignlondon.com
