Transcript
4036-7774-02.fm 0 ページ 2004年2月12日 木曜日 午前9時21分 INSTALLATION MANUAL Working Table WT-501 NOTES • Before installing, be sure to unplug the power cord of the machine. • Keep all packing materials out of the reach of children. for Product Code 4036 ■ Installing the Working Table 1. Remove the two rubber caps at the locations on the left side surface of the machine shown on the left. ■ Unpacking the Working Table Check that the following accessories are available in the box. 1 Working Table ........................................................................................1 4036U031AA 2 Bracket ...................................................................................................1 2. Install the Bracket to the Working Table (four screws A furnished with the Working Table). 3 Screw A (4x8).........................................................................................4 4 Screw B (4x18).......................................................................................4 5 Installation Manual (this manual) ...........................................................1 1 2 3 4 5 4036U032AA 4036U028AA 4036U029AA 4036U034AA 3. Install the Working Table to the machine at the location shown on the left (four screws B furnished with the Working Table). 4036U030AA 4036U033AA 4036-7774-02 Printed in Japan