Transcript
HITCH UP PET STEP Model: HU200 Contents: 1- Pet step assembly 1- 1¼” receiver bar 1- 2” receiver bar 1-5/16” x 4” bolt 1- 5/16” x 5” bolt 1- 5/16” locknuts 3-5/16” flat washers Fig. 1 Fig.2 To use pet step, select proper size receiver bar for the appropriate size receiver on vehicle that pet step is to be used on. Install correct receiver bar to pet step assembly using appropriate hardware. (See figs. 1 & 2). Once receiver bar is attached to pet step assembly, simply slide receiver bar into receiver hitch and pin into place with hitch pin. (not included). Hitch up pet step can be left in receiver and folded up and secured with bungee strap. NOTE: Weight capacity: 300 Lbs. (DO NOT EXCEED WEIGHT CAPACITY) For more information about this or other products, contact us at: Great Day, Inc. 604 Kimbrough Dr. * Tallulah, LA 71282 * (866) 649-1918 * www.greatdayinc.com
