Transcript
Gooseneck Mounting Post – In Ground assembly instructions A Top section with mounting plate (1) D Coupling (2) B Middle section with holes at both ends (1) E Allen head set screw (4) C Bottom section with holes at one end (1) F Allen wrench (1) A Insert coupling into sections, align the holes, screw set screws into coupling. 45” E D Suitable for most passenger size vehicles and SUVs’ 1 E 2 B Tighten set screw until section junctions are tight and rigid. 3 E D F E Set in concrete. C If using a wired keypad or intercom run wire through PVC conduit and up through Gooseneck post. GTO Access Systems, LLC • 3121 Hartsfield Road • Tallahassee, FL 32303 800-543-4283 • www.gtoinc.com 091013