Download Symmetrix SLS-2012-DP4-RP Installation Guide
Transcript
Symmetrix™ Lavatory Faucet SLS-2012-DP4-RP Installation and Service Instructions Model Number Tools & Materials Need Help? Contact Symmons customer service at (800) 796-6667, (781) 848-2250 Email: [email protected] Monday - Friday 7:30 am - 7:00 pm EST SLS-2012-DP4-RP Lavatory faucet with lift rod and pop-up drain assembly, p/n LN-01299 Please check Symmons website Decorative Finish Code for technical help, the latest product information and warranty policy. www.symmons.com/service Append to part numbers when applicable -- Chrome (standard) Quick Install Guide Symmetrix Lavatory Faucet, SLS-2012 Series 6 1 5 4 2 3 Installation Instructions If replacing an older faucet ensure water supply is turned OFF before removing, then open faucet valves to relieve water pressure. 3 1 2 flange washer *(optional) 4 *use included flange washer only when plumbers putty is not available PLUMBERS PUTTY flange back of sink 3 beveled washer 1 2 friction washer flange nut 1/2" (13 mm) Page 2 Valve cartridge replacement 5 2.5 mm 2.5 mm HOT COLD 6 Care of faucet finish Use mild soap and water or non-abrasive cleaner to clean finished area and then rinse immediately. A non-abrasive wax may be used to preserve finish area. Page 3 Dimensions Symmetrix Lavatory Faucet, SLS-2012-DP4-RP 2" (50 mm) 5-5/16" (135 mm) Deck plate 5-7/8" (150 mm) 6-1/2" (165 mm) Deck thickness 1-3/4" (46 mm) max 4" (101 mm) 3" (77 mm) Deck plate 2-15/16" (75 mm) 3/16" (5 mm) Hole size 1-1/2" (38 mm) 3/8" compression Note: (1) Dimensions subject to change without notice. Parts Assembly Symmetrix Lavatory Faucet, SLS-2012-DP4-RP plug button handle 2.5 mm Allen wrench (not included) Replacement Parts Allen screw Part Number Item LN-01417 Cartridge FLR-110-1.5 Aerator & retainer 1.5 gpm (5.7 L/min) cap retainer cartridge faucet body aerator 1.5 gpm (5.7L/min) retainer lift rod pop-up drain assembly Handle kit plug button Allen screw base gasket 4 inch deck plate and gasket u-gasket u-metal washer threaded stud long hex nut LN-01449 handle 2.5 mm Allen wrench required (not included) COLD: blue stripe HOT: red stripe Ordering replacement parts: Call Symmons customer service at (800) 796-6667, (781) 848-2250 M-F 7:30 am - 7:00 pm EST or check our website at ww.symmons.com for a list of Symmons distributors. hose connections 3/8" compression Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ ©2012 Symmons Industries, Inc. ■ Printed in U.S.A. (800)796-6667, (781)848-2250 ■ Fax: (800)961-9621, (781)664-1300 ■ www.symmons.com ■ [email protected] Model# SLS-2012-DP4-RP ■ p/n LN-01299 ■ Document# ZV-1080 ■ RevDate 110713