Transcript
Contemporary Technical Specification P5050, P5080 Paper Holder Stock Numbers: P5050 – Paper Holder Polished Chrome Finish Concealed Screw Mounting Matching Roller P5080 – Paper Holder Polished Chrome Finish Concealed Screw Mounting White Roller Dimensions: “P” – Poly Bag Packaging Materials: Paper Holder posts are die cast from highest quality zinc alloy (zamac). Castings are triple plated with a polished brass or polished chrome finish. 5050 roller is chrome plated plastic. 5080 roller is white plastic. Both rollers are spring loaded. Installation Instructions: 1. Remove mounting brackets from back of fixtures by loosening the set screws. 2. Position assembled unit on wall in desired location. 3. Lightly mark the outlines of the bases of the unit. 4. Center mounting brackets inside the outline. 5. Mark hole locations. Attach brackets to wall using 1 3/8” screws (provided). 6. Mount bases on brackets. Tighten set screws on the bottoms. Note: Wood blocking is preferable behind all wall surfaces. If wood blocking is not available, the following optional fasteners are suggested: Tile/Masonry – Plastic or Lead Anchors; Plaster/Drywall – Toggle Bolts. Cleaning Instructions: To preserve the fine finish of this product, clean only with a soft damp cloth. Dry well. Do not use commercial or abrasive cleaners. Stock Number:______________________Paper Holder By Creative Specialties 2 5 3 0 0 A L MO E N D R I V E N O R TH O L MS TE D , O H 4 4 0 7 0 C O R P O R A TE H E A D Q U A R TE R S : ( 8 0 0 ) 3 2 1 - 8 8 0 9 F A X: ( 8 0 0 ) 8 4 8 - 6 6 3 6 I N TE R N A TI O N A L : ( 4 4 0 ) 9 6 2 - 2 0 0 0 F A X: ( 4 4 0 ) 9 6 2 - 2 7 2 6 C U S TO ME R S E R V I C E ( U S A ) : 8 0 0 - 8 8 2 - 0 1 1 6 F A X: ( 8 8 8 ) 3 7 9 - 2 7 2 0 W W W . MO E N . C O M Copyright Creative Specialties International Literature #BA0991
