Transcript
K-2355 ARCHERTM UNDERCOUNTER LAVATORY Roughing-In Installation Notes Product Information Install this product according to the installation guide. Applicable product: Undercounter lavatory Lavatory is ADA compliant when installed per the requirements of the Accessibility Guidelines, Section 606 Lavatories and Mirrors, of the Act. Recommended accessory: Adjustable P-Trap Supplied basin clamp assemblies require 1″ (2.5 cm) minimum countertop thickness. Installer must supply anchors for thinner countertops. NOTICE: Countertop manufacturer or cutter must use the cut-out template provided with the product, or a current one provided by Kohler (call 1-800-4-KOHLER). Kohler is not responsible for cut-out errors when incorrect cut-out template is used. Fixture conforms to ASME Standard A112.19.2/CSA B45.1. All dimensions are nominal. K-8998 Included components: Basin clamp assembly Cut-out template Fixture*: Basin area Water depth Drain hole * Approximate K-2355 52047 1051937-7 17-5/8″ (44.8 cm) x 13″ (33 cm) 3-3/4″ (9.5 cm) 1-3/4″ (4.4 cm) D. measurements for comparison only. CL of Fitting 2-1/2" (6.4 cm) 7-9/16" (19.2 cm) 15-5/16" (38.9 cm) 10-1/16" (25.6 cm) 34" (86.4 cm) 27" (68.6 cm) Min 1-1/8" (2.9 cm) 9-15/16" (25.2 cm) 19-7/8" (50.5 cm) 7/16" (1.1 cm) 14" (35.6 cm) 7-1/2" (19.1 cm) 13-1/8" (33.3 cm) 24" (61 cm) 3" (7.6 cm) 8" (20.3 cm) 6" Min (15.2 cm) Max 9" (22.9 cm) Min Recommended ADA Installation 3/8" (1 cm) D. 3/8" Hot 3/8" Cold 1-1/4" Outlet 5/8" (1.6 cm) Sealant Sealant Marble 4" (10.2 cm) Standard Installation ARCHERTM UNDERCOUNTER LAVATORY 1063457-1-C Installation Wood