Transcript
How To Assemble The 3 Piece Prelit Palm Tree (Model# 3240-456C) 1. Locate the 4 pole sections. a. Shortest section b. Middle section c. Longest section with consists of 2 pieces. 6. Attached the top section from the 2 pcs pole set to the bottom section. 9. On the tallest pole, carefully connect the plugs from the top pole to the lower pole. 2. Locate the 3 tree tops. a. Small b. Medium c. Large 7. This is the way the poles should look before continuing the assembly process. 10. On all 3 poles, carefully connect the plugs from the pole to the tree top. 3. Locate the base. Each set of base includes 9 wing nuts. 8. Attached the smallest top on to the shortest pole. 11. Wrap base with burlap cloth that is provided with the tree. (For Example Only) 4. Locate the 2 pc pole and place the bottom section onto the center peg. 9. Attached the medium size top onto the middle size pole. 12. Shape the tree top by evenly spreading the green limbs into an arch from the center to the outer end of the limb. Then connect the 3 cord plugs into the outlet to light the tree. 5. Attach the next 2 poles on the remaining 2 pegs 10. Place the largest top onto the tallest pole. 13. The palm tree also comes with 3 yard stakes. These can be used to secure the base of the palm trees for outdoor use.
