Transcript
K-3161 POISETM UNDERCOUNTER ENTERTAINMENT SINK Roughing-In Product Information Applicable product: Undercounter entertainment sink with cutting board and bottom basin rack Undercounter entertainment sink with mirror finished rim, cutting board and bottom basin rack K-3161 shown K-3161-H shown Included components: Hardware kit Cut-out template Sink Bamboo cutting board Bottom basin rack 91915 1022021-7 K-3391 K-3140 K-3142 Installation Notes Install this product according to the installation guide. Allow a minimum of 3″ (7.6 cm) clearance around the sink rim for clip attachment. Fixture*: Basin area 14″ (35.6 cm) x 14″ (35.6 cm) Water depth 9-3/16″ (23.3 cm) Drain hole 3-5/8″ (9.2 cm) D. *Approximate measurements for comparison only. Fixture conforms to ASME Standard A112.19.3/CSA B45.4. All dimensions are nominal. 2" (5.1 cm) Countertop 9" (22.9 cm) 18" (45.7 cm) Sink Clip 9" (22.9 cm) 18" (45.7 cm) 3" (7.6 cm) Min 1-5/16" (3.3 cm) 9-1/2" (24.1 cm) 14-7/8" (37.8 cm) 1-1/2" OD POISETM UNDERCOUNTER ENTERTAINMENT SINK 1022021-1-C