Transcript
CON-TACT LINER GRIP PRINTS Non-Adhesive SURFACE PREPARATION Clean surfaces prior to application as necessary. All surfaces should be dry, clean, and smooth. CAUTION Not for use on lacquered or urethane surfaces. Finish damage may occur. Care should be taken when placed on latex semi-gloss and gloss paints. Painted areas must be completely cured otherwise the liner may stick to the surface. Cool and/or humid conditions required a longer curing time. APPLICATION Measure area to be covered Cut to desired size and/or shape CLEANING AND MAINTENANCE Washable Clean by simply wiping the surface with a damp cloth. Mild soap can be used if necessary. Hand wash Do Not Wring Lay flat to dry La Mirada, CA tel. 714-736-1000 fax. 714-736-2078 customer service. 800-321-1741 email. [email protected]