Download Way Basics BS-CB-1-BK Instructions / Assembly
Transcript
Thank You Thank you for choosing Way Basics! With your help, Way Basics furniture is helping protect the environment. No new trees were cut down to create our furniture, because it’s made from recycled paper. At the end of its long life we hope you’ll find other uses for our zBoards or simply recycle – then they might eventually find their way back to Way Basics where we’ll make them into new zBoards! Inside Your Package Horizontal zBoards Vertical zBoards adhesive strip on 1 edge adhesive strip on 2 edges Pins Super Cube Soho Madison Cozy Bench Quad Cube Chelsea Sutton Laguna Before You Begin 12 24 36 20 32 32 48 48 pins pins pins pins pins pins pins pins • Assemble your unit on a flat even surface, carpet not recommended • When moving your Way Basics furniture, lift from the bottom • Furniture is for indoor use only • Make sure zBoard surfaces are clean and dry THIS SIDE UP Right Side Up Correct Tip: Make sure only one zBoard touches the floor to confirm correct usage. ON SIDE ON BACK When placed on side or back, vertical strength is compromised. Incorrect Share a photo on our wall! www.facebook.com/waybasics Incorrect Get Started Super Cube 1 Peel adhesive strips on vertical zBoards 2 Place pins in each vertical zBoards 3 Align the vertical zBoards to the horizontal zBoard 4 Align the top horizontal zBoard Follow the 4 easy steps above for these following styles: Cozy Bench Quad Cube Soho (2 shelf) Madison (3 shelf) Chlesea (2 shelf) Sutton (3 shelf) middle horizontal boards have holes completely through For questions, comments or feedback, our team is excited to help you. Please contact us via the following www.waybasics.com/help Scan with QR Laguna