Download none 6013-167 Instructions / Assembly

Transcript
6013-167 Clothes Closet
A1 4 ea
©2006 Whitmor
B 5 ea
E 6 ea
C 5 ea
F 1 ea
30.75” Frame tube
Assembly
Time:
Less than
1 hour.
H 2 ea
31.38” Frame tube
Bottom Panel
Corner support
30.75” Male frame tube
A2 2 ea
D 6 ea
Center support
30.75” Clothes rod
G 1 ea
31.5” Male frame tube
This product's intended
use is for storing clothes.
I 1 ea
Cover
30.75” Male clothes rod
Tools Needed: No tools required.
Note: All metal parts must be
inserted firmly and completely into
the plastic parts.
Note: Closet rods (F & G) are wider
Note: The middle tubes (B&C) go
into the smaller upper center holes
on (A1 & A2).
A1
C
A2
B
C
E
E
in diameter than frame tubes (B & C)
and are inserted into the larger lower
center holes on (A1 & A2).
A1
C
D
C
D
A2
B
B
B
A1
STEP 1. To assemble the
lower frame, insert three
frame tubes (B) into one
corner support (A1). Place
center support (A2) onto
frame tube ends. Insert
three male frame tubes (C)
into center support where
frame tubes intersect.
Place another corner
support (A1) onto the end.
F
G
C
B
A1
STEP 2. Insert six male frame
tubes (D) into lower frame
followed by six frame tubes (E).
STEP 3. To assemble top of
frame, insert two frame tubes (B)
and the clothes rod (F) into one
corner support (A1). Insert center
support (A2) onto the tubes. Insert
two male frame tubes (C) and the
male clothes rod (G) into center
support where frame tubes
intersect. Place another corner
support (A1) onto the end.
Note: Although your
clothes closet can be
assembled by one person,
it is recommended that two
people install the cover.
I
H
STEP 4. Place complete upper
STEP 5. Place 2 bottom panels
frame assembly from step 3 on
top of closet.
(H) in the bottom of the closet.
Unzip zipper on cover (I) and
carefully place over top of closet
and slide down, holding onto the
top corners to prevent snagging.
Make sure to pull all corners down
evenly.
Rev#1 6.1.06
Part
A1
A2
B
C
D
E
F
G
H
I
Reference
F6044
F6045
F6046
F6047
F6048
F6064
F6049
F6050
F6051
F6052
MADE IN CHINA
For missing parts or assistance:
Whitmor/Customer Service Department
P.O. Box 28 • 17539 Hwy 64 • Earle, AR • 72331
1-888-944-8667
[email protected]
Printed in China