Download Transition Networks ETHERNET E-TBT-MC01(LC) User's Manual

Transcript
Ethernet™
10BaseT Transceiver
E-TBT-MC01(LC)
The Ethernet10BaseT Transceiver (E-TBT-MCO1(LC)) connects an AUI cable and connector to a
10BaseT twisted pair cable and RJ-45 connector.
INSTALLATION INSTRUCTIONS
Connecting the 10BaseT Transceiver:
Connect the AUI connector of the
10BaseT Transceiver to the AUI port on
the PC, either directly or through an AUI
cable (maximum AUI cable distance 50
meters (165 feet)).
R
N
PO
N
E
C
E
KW
T
E
R
V
E
™
T
S
I
R
P
E
N
OWER
INK
L
FF
Connect 10BaseT cable to hub.
E
S
O
3.
F
LI
A
N
Connect the RJ-45 of the10BaseT
Transceiver to a STRAIGHT THROUGH
male/male 10BaseT cable.
OF
ON
H
10BA
TR
O
2.
SQE
ET
10B
ASET
E THERNET ™
T
RANSCEIVER
1.
Straight Through Cable at RJ-45 Plug
RJ-45 Male . . . . . . . . . . . . . . . . . .RJ-45 Male
1 . . . . . . . . . . . . . . . . . . . . . . . . . . .1
2 . . . . . . . . . . . . . . . . . . . . . . . . . . .2
3 . . . . . . . . . . . . . . . . . . . . . . . . . . .3
6 . . . . . . . . . . . . . . . . . . . . . . . . . . .6
SQE
On
AUI (DB-15)
SQE Heartbeat:
Ethernet™
10BaseT
Transceiver
Off
RJ-45
Link
Power
Enable - The SQE switch should be enabled (ON) when the 10BaseT
Transceiver is connected to a DTE or workstation.
Disable - The SQE switch should be disabled (OFF) when the 10BaseT
Transceiver is connected to the AUI port of an Ethernet repeater such as
the model 1003 10BaseT hub.
FCC APPROVAL: This equipment has been tested and found to comply with the limits for a class A digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. this equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference, in which case, the user will be required to correct the interference at his own expense.
Minneapolis, MN 55344 USA
phone 612-941-7600
toll free 800-LAN-WANS (800-526-9267)
fax 612-941-2322
bulletin board 612-941-9304
[email protected]
[email protected]
7324.C
toll free tech support USA 800-260-1312