Transcript
Brackets for Cameras without Built-in or Accessory Grips Stroboflip Quick Flip 350 (35mm) Quick Flip 120 (Medium Format) Our most economical flash-rotating brackets. The Quick Flip models offer high value, compact size, light weight and fast handling. These are the best-selling brackets on the market. Although lower in price than our top-of-the-line brackets, they share the same quality materials and construction. The Quick Flip 350 accepts all 35mm cameras except those with large, accessory battery packs or motor drives. The Quick Flip 120 has a large base for medium format cameras and is configured for both eye-level and waist-level viewing. Quick Flip LIGHT, FAST, LOW-PRICED! Quick Flip Specifications Features: • Pivoting flash arm keeps the flash centered above the lens for both horizontal and vertical compositions. • Supplied with a machined, positive-locking shoe mount that is interchangeable with an optional handle mount. • Strong, lightweight, aluminum construction with baked-on finish for hard use and durability. • High-density, neoprene foam side grip for comfortable shooting or carrying. Net Weight: 10 oz. (Quick Flip 350) 12 oz. (Quick Flip 120) Bracket Height: 9.5" Nominal Lens-to-Flash Distance: 12" Includes: Shoe mount,* 1/4"-20 camera mounting knob Suggested Accessories: Camera Auto Quick Release, Cord Wrap Catalog Number: 310-635 (Quick Flip 350) Catalog Number: 310-666 (Quick Flip 120) NOTE: Quick Flip models do not accept Camera Anti-Twist Plates. Stroboflip The most compact approach to flash rotation. The Stroboflip is an ultra-compact, “gripless,” flash-rotating bracket. It cradles the camera unobtrusively while maintaining an over-the-lens flash position. Its design lets you hold the camera, rather than a grip, and rotate the flash for horizontal or vertical composition. An additional advantage is that the stress and weight of the flash unit is transferred from the light-duty camera shoe to the rugged Stroboframe mount. The Stroboflip is made for shoe-type flash units. Features: • Accepts all 35mm SLRs and smaller 6 x 4.5mm cameras. • Supplied with a machined, positive-locking shoe mount and a 35mm Anti-Twist Plate (interchangeable with other AT Plates). • Strong, lightweight aluminum construction with baked-on finish for hard use and durability. THE ULTRA-COMPACT, “UN-BRACKET!” Stroboflip Specifications Net Weight: 9 oz. Bracket Height: 5.5" Nominal Lens-to-Flash Distance: 7.5" Includes: Shoe mount,* standard 35mm Camera Anti-Twist Plate Suggested Accessories: Camera Auto Quick Release, for tripod mounting Catalog Number: 300-100 * Stroboflip and Quick Flip brackets are not compatible with Metz quick release mounts. For Metz or other handle-type flash, use Bracket Handle Mount (#300-HAN), sold separately. Stroboframe • Stroboframe