Download Sony KDL32XBR950 User's Manual

KDL32XBR950
KDL42XBR950
Thank you for purchasing this
Sony product.
Checking the Supplied
Accessories
Remote Control
(RM-Y1000):
1
Two size AA
Display Interface
batteries (R06 Type): Cable:
Quick Start Guide
– Insert batteries into the
remote control.
1 Connect the display interface cable (supplied) to the DISPLAY
SIGNAL IN jacks, and the AC power cord (supplied) to the AC IN jack
of the unit.
KDL32XBR950
After following this step by step
guide you will be able to:
3
Connecting the
Display Unit to the
Media Receiver Unit
KDL42XBR950
4
The way in which you will connect your TV varies, depending on how
your home receives a signal (cable, cable box, antenna) and whether or
not you plan to connect a VCR or other optional AV equipment.
See examples A, B or C to connect your TV. For details on other
connection examples, see pages 31 to 54 of the operating instructions.
A Cable or Antenna
Antenna Cable:
For best results, use this connection if you are connecting a
cable or an antenna and you;
Two AC power
cords:
• Do not need a cable box to unscramble channels.
• Do not intend to connect a VCR.
– Connect the display unit to
the media receiver unit.
– Connect a cable or antenna to
your TV.
Connecting a Cable or
Antenna
For antenna connection, use the supplied antenna cable.
• Speaker jack covers
(KDL42XBR950 only)
• Operating Instructions
• Quick Start Guide
• Warranty Card
Rear of Media Receiver Unit
SONY EXCLUSIVE CABLE ONLY
WHITE
BLACK
CABLE
DISPLAY SIGNAL IN
S400
VHF/UHF
(TS/DV/MICROMV)
i.LINK
– Tune your TV .
– Program your remote control
Now you are ready for viewing
TV programs.
Inserting Batteries into
the Remote Control
1 Open the battery compartment as illustrated below.
2
Tighten the screw Display Interface
slowly until the
cable (supplied)
screw is stabilized.
When you install KDL42XBR950, use the optional accessories as
follows:
• SONY TABLE TOP STAND: SU-P42T2
• SONY WALL-MOUNT BRACKET: SU-PW2
• SONY FLOATING STAND: SU-PF1
2 Connect the other end of display interface cable to the media receiver
unit’s DISPLAY SIGNAL OUT jacks, and connect the media receiver
unit’s AC power cord (supplied) to the AC IN jack .
2 Insert two size AA batteries (supplied) by matching the e and E
terminals on the batteries to the diagram inside the battery
compartment.
VHF/UHF
i.LINK
WHITE
BLACK
~ AC IN
DISPLAY SIGNAL OUT
Display Interface cable
(supplied)
DISPLAY SIGNAL OUT
Antenna cable
(supplied)
US
© 2003 Sony Corporation
Printed in Japan
4-102-399-01(1)
or
75-ohm coaxial cable
(not supplied)
When using an indoor antenna, such as rabbit-ear or dipole-antenna,
keep the antenna away from the display unit. If not, noise may appear
on the screen.
B Cable Box and Cable
AC power cord
(supplied)
• Your cable company scrambles some channels, such as premium
channels (which requires you to use a cable box), but does not
scramble all channels.
• You do not have a VCR.
Tighten the screw slowly
until the screw is stabilized.
Remove the batteries to avoid damage from possible battery leakage
whenever you anticipate that the remote control will not be used for
an extended period.
Handle the remote control with care.
Avoid dropping it, getting it wet, placing it in direct sunlight, near a
heater, or where the humidity is high.
~ AC IN
BLACK
For best results, use this connection if;
CABLE
S400
(TS/DV/MICROMV)
3 Close the battery compartment.
WHITE
AC power cord
(supplied)
Be sure to use the supplied AC power cords.
When connecting optional components, do not connect the AC
power cords to wall outlets until you have completed making all
connections.
Do not tighten the screws too much. It may damage the screws.
Do not use damaged cables, such as cables whose connectors are
deformed.
Handle the display interface cable with care. This unit may fall and
cause injury if accidently knocked or pulled by the connected cable.
To store the AC power cord and the display interface cable in the
stand;
(KDL32XBR950)
See “Storing the AC power cord and the display interface cable
into the stand (KDL32XBR950 only)” on page 28 of the
operating instructions.
(KDL42XBR950)
See the operating instructions for the optional tabletop stand.
IN OUT
CATV
cable
Splitter
75-ohm
Cable Box
coaxial cable
(not supplied) Antenna cable
(supplied)
75-ohm
coaxial cable
(not supplied)
Rear of Media Receiver Unit
CABLE
S400
VHF/UHF
(TS/DV/MICROMV)
i.LINK
WHITE
BLACK
DISPLAY SIGNAL OUT
~ AC IN
4
Connecting a Cable or
Antenna
Tuning Your TV
Automatically
C Cable Box, VCR and DVD Player
5
1 Connect the display unit and
media receiver unit to wall
outlets.
For best results, use this connection if;
• Your cable company scrambles some channels, such as premium
channels (which requires you to use a cable box), but does not
scramble all channels.
PIC OFF
POWER
POWER/STANDBY
TIMER
i.LINK
INPUT SELECT
–
VOL
+
Programming Your
Remote Control
The remote control is preset to operate Sony brand video equipment.
Beta/ED Beta VCRs: 303, 8mm VCR: 302, VHS VCR: 301, DVD
player: 751, i.LINK: 901.
If you have video equipment other than Sony brand that you want to
control with the TV’s remote control, use the following procedure to
program the remote control.
TV
VIDEO
MEMORY STICK
1 Refer to the following list of “Manufacturer’s Codes” below and right,
PIC OFF
POWER
POWER/STANDBY
TIMER
i.LINK
INPUT SELECT
–
VOL
+
– CHANNEL +
i.LINK/STANDBY
TV
VIDEO
MEMORY STICK
i.LINK
2 Press POWER to turn on the TV.
The Initial Setup screen appears.
POWER/STANDBY
TIMER
2 Press FUNCTION repeatedly until the DVD/VCR, SAT/CABLE or
i.LINK/STANDBY
DVD Player
i.LINK indicator lights up.
3 Press SAT/CABLE for five seconds until the indicator of the selected
Rear of Media Receiver Unit
HD/DVD IN
(1080i/720p/480p/480i)
Y
VIDEO
PB
Y
5
AUDIO
PB
L
AUDIO
L
4
SUB WOOFER
OUT(VAR)
OPTICAL OUT
VIDEO IN
3
PR
R
PR
R
S400
L
IN
R
OUT
i.LINK
AUDIO OUT
(VAR/FIX)
DVI–HDTV IN
R - AUDIO - L
WHITE
6
BLACK
~ AC IN
CATV
cable
75-ohm coaxial cable
(not supplied)
Cable box
A/V cable
Splitter
(not supplied)
CATV cable
to select the on-screen display
language. Then press ENTER of
the remote control.
Language: English
Español
Fr a n ç a i s
DISPLAY SIGNAL OUT
Antenna cable
(supplied)
VCR
3 Press v or V of the remote control
Initial Setup
VHF/UHF
(TS/DV/MICROMV)
DVI–HDTV
R
1
CABLE
CONTROL S
L
AUDIO
and find the three-digit code number for the manufacturer of your
equipment. (If more than one code number is listed, use the number
listed first.)
POWER
Audio cable
Move:
Select:
End:
4 Press v or V of the remote
control to select “Yes”, then press
ENTER of the remote control.
First please connect
cable/antenna
Star t auto program now?
Ye s
No
75-ohm coaxial cable
(not supplied)
End:
5 Press ENTER.
You must do step 5 within 10 seconds of step 4, or you must redo
steps 4 through 5.
6 To check if the code number works, aim the remote control at the
equipment and press POWER that corresponds with that equipment. If
it responds, you are done. If not, try using another code listed for that
manufacturer.
Manufacturer’s Codes
VCRs
Au t o P r o gra m
CH Found :
CH Found :
manufacturer’s code number.
MENU
m
Analog
Digital
4 While the desired indicator is flashing, enter the three-digit
The message “Start auto program
now?” appears.
Initial Setup
Select:
input flashes.
MENU
m
Move:
Manufacture
Code
Manufacture
Code
RCA/PROSCAN
304, 305, 308, 309,
311, 312, 313, 310,
329
Sony
651
Realistic
309, 330, 328, 335,
324, 338
Sansui
314
Samsung
322, 313, 321
Sanyo
330, 335
Cable Boxes
Scott
312, 313, 321, 335,
323, 324, 325, 326
Manufacture
Code
Sharp
327, 328
Sony
230
Signagure 2000
(M.Ward)
338, 327
Hamlin/Regal
222, 223, 224, 225,
226
SV2000
338
Jerrold/G.I.
Sylvania
308, 309, 338, 310
Symphonic
338
201, 202, 203, 204,
205, 206, 207, 208,
218
Tashiro
332
Oak
227, 228, 229
Tatung
314, 336, 337
Panasonic
219, 220, 221
Teac
314, 336, 338, 337
Pioneer
214, 215
Technics
309, 308
Toshiba
312, 311
Wards
327, 328, 335, 331,
332
Yamaha
314, 330, 336, 337
Satellite Receivers
Zenith
331
Manufacture
Code
Sony
801
Laserdisc Players
Dish Network
810
Manufacture
Code
Echostar
810
Sony
701
General Electric
802
704, 710
Hitachi
805
702
Hughes
804
Mitsubishi
809
Panasonic
803
RCA/PROSCAN
802, 808
Toshiba
806, 807
– CHANNEL +
7
6
0
Searching..
Please wait. Allow 33 minutes
fo r c o m p l e t i o n
Auto Program automatically creates
a list of receivable channels. When
finished, the lowest numbered
channel is displayed.
Press any button to cancel
To run the Auto Program feature at a later time, see page 110 of the
operating instructions.
To add individual digital channels, use the Digital Channel feature on
page 78 of the operating instructions.
The Auto Program feature does not apply for installations that use a
cable box for all channel selection.
Auto Program may take up to 30 minutes to complete. A progress bar is
displayed while the channel list is being created.
Panasonic
Manufacture
Code
Manufacture
Code
Sony
301, 302, 303
JVC
314, 336, 337,
345, 346, 347
Admiral (M.Ward) 327
338, 344
Aiwa
Kenwood
314, 336, 332, 337
AV Receiver*
VCRs
i.LINK
The equipment must have infrared (IR) remote capability in order to be
used with the remote control.
8
Manufacturer’s Codes
i.LINK/STANDBY
Component video cable
S VIDEO
6
Pioneer
DVD Players
Audio Dynamic
314, 337
LG
332
Manufacture
Code
Broksonic
319, 317
LXI (Sears)
Sony
751
Canon
309, 308
332, 305, 330, 335,
338
Sony (i.LINK)
901
Citizen
332
Magnavox
308, 309, 310
General Electric
755
Craig
302, 332
Marantz
314, 336, 337
Hitachi
758
Criterion
315
Marta
332
JVC
756
Curtis Mathes
304, 338, 309
Memorex
309, 335
Magnavox
757
Daewoo
341, 312, 309
Minolta
305, 304
Mitsubishi
761
DBX
314, 336, 337
Mitsubishi/MGA
323, 324, 325, 326
Oritron
759
Dimensia
304
Multitech
325, 338, 321
Panasonic
753
Emerson
319, 320, 316, 317,
318, 341
NEC
314, 336, 337
Philips
757
Olympic
309, 308
Pioneer
752
330, 335
Optimus
327
RCA/Proscan
755
338
Orion
317
Samsung
758
329, 304, 309
Panasonic
308, 309, 306, 307
Toshiba
754
Go Video
322, 339, 340
Pentax
305, 304
Zenith
760
Goldstar
332
Philco
308, 309
Hitachi
306, 304, 305, 338
Philips
308, 309, 310
Instant Replay
309,308
Pioneer
308
JC Penney
309, 305, 304,
330, 314, 336, 337
Quasar
308, 309, 306
Fisher
Funai
General Electric
5.1 DVD AV System (DAV)*
Manufacture
Code
Sony
601
Scientific Atlanta 209, 210, 211
Tocom
216, 217
Zenith
212, 213
* This manufacturer code might not
work for some models. Please see
page 62 of the operating
instructions for the models
functioning with these codes.
Your TV is now ready for use.