Download Snapper 2385 User's Manual

Attachment
Illustrated
Parts List
MANUFACTURING, INC.
500 N Spring Street / PO Box 997
Port Washington, WI 53074-0997 USA
© Copyright 2000 Simplicity Manufacturing, Inc.All Rights Reserved.
Rev. 11/2000
TP 400-2385-00-AT-SMA
Lift Lever - Lift Lever
984905
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
1
2
7
26
3
4
5
16
15
12
8
13
9
14
11
10
10
13
12
The above parts group applies to the following Mfg. Nos.:
1692623 Lift Lever - Regent
© Copyright 2000 Simplicity Manufacturing, Inc. All Rights Reserved.
2
TP 400-2385-00-AT-SMA
Lift Lever - Regent
REF NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PART NO.
1650157
1713995
1704718
1934953
1667286
1657648
1667290
1704715
1674669
1919438
1704716
1921977
1675795
1665591
1921719
1927609
QTY.
1
1
1
1
1
1
1
1
1
4
1
4
2
1
1
1
DESCRIPTION
BUTTON
GRIP
LEVER ASSEMBLY
PUSH NUT, 5/16
SPRING
LATCH, Lift Lever
ROD
BRACKET
SPACER
LOCKNUT, 5/16-18
SPACER
CAPSCREW, Hex Head 5/16-18 x 1-1/4
SPACER
QUADRANT, Lift
CAPSCREW, Hex Head, 3/8-18 x 2-1/2
ROLL PIN, 3/8 x 1
Footnotes:
The above parts group applies to the following Mfg. Nos.:
1692623 Lift Lever - Regent
TP 400-2385-00-AT-SMA
3
Hardware Identification & Torque Specifications
Common Hardware Types
Torque Specification Chart
Hex Head Capscrew
FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)
Washer
Hardware
Grade
Lockwasher
Carriage Bolt
No
Marks
SAE Grade 2
Hex Nut
Size Of
Hardware
Standard Hardware Sizing
8-32
8-36
10-24
10-32
1/4-20
1/4-28
5/16-18
5/16-24
3/8-16
3/8-24
7/16-14
7/16-20
1/2-13
1/2-20
9/16-12
9/16-18
5/8-11
5/8-18
3/4-10
3/4-16
7/8-9
7/8-14
1-8
1-12
When a washer or nut is identified as 1/2”, this is the
Nominal size, meaning the inside diameter is 1/2 inch; if a
second number is present it represent the threads per inch
When bolt or capscrew is identified as 1/2 - 16 x 2”, this
means the Nominal size, or body diameter is 1/2 inch; the
second number represents the threads per inch (16 in this
example, and the final number is the body length of the
bolt or screw (in this example 2 inches long).
The guides and ruler furnished below are designed to
help you select the appropriate hardware and tools.
0
1/4
Nut, 1/2”
1/2
Inside
Diameter
3/4
1
1/4
1/2
3/4
Screw, 1/2 x 2
2
1/4
Body
Diameter
in/lbs
ft/lbs
19
20
27
31
66
76
11
12
20
23
30
35
50
55
65
75
90
100
160
180
140
155
220
240
Nm.
2.1
2.3
3.1
3.5
7.6
8.6
15.0
16.3
27.2
31.3
40.8
47.6
68.0
74.8
88.4
102.0
122.4
136
217.6
244.8
190.4
210.8
299.2
326.4
SAE Grade 5
in/lbs
ft/lbs
30
31
43
49
8
10
17
19
30
35
50
55
75
90
110
120
150
180
260
300
400
440
580
640
SAE Grade 8
Nm.
in/lbs
ft/lbs
Nm.
3.4
3.5
4.9
5.5
10.9
13.6
23.1
25.8
40.8
47.6
68.0
74.8
102.0
122.4
149.6
163.2
204.0
244.8
353.6
408.0
544.0
598.4
788.8
870.4
41
43
60
68
12
14
25
27
45
50
70
80
110
120
150
170
220
240
386
420
600
660
900
1,000
4.6
4.9
6.8
7.7
16.3
19.0
34.0
34.0
61.2
68.0
95.2
108.8
149.6
163.2
204.0
231.2
299.2
326.4
525.0
571.2
816.0
897.6
1,244.0
1,360.0
NOTES
1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread forming
screws, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts:
a. for prevailing torque locknuts - use 65% of grade 5
torques.
b. for flange whizlock nuts and screws - use 135% of
grade 5 torques.
3. Unless otherwise noted on assembly drawings, all torque
values must meet this specification.
1/2
Body
Length
3/4
3
1/4
1/2
3/4
4
Wrench & Fastener Size Guide
1/4
5/16
3/8
1/4” Bolt or Nut
Wrench—7/16”
5/16” Bolt or Nut
Wrench—1/2”
3/8” Bolt or Nut
Wrench—9/16”
7/16
DIA.
7/16” Bolt or Nut
Wrench (Bolt)—5/8”
Wrench (Nut)—11/16”
1/2
DIA.
1/2” Bolt or Nut
Wrench—3/4”