Transcript
DIMENSIONS – GAS BOILERS VICTORY VSPH SERIES ® (DOTTED PIPING BY OTHERS) Install manual main shutoff valve 5' above floor when required by local code Dotted gas piping by others Pressure relief valve 11⁄2" FPT supply 12" 3 ⁄4" to air eliminating system 3" dia. vent connector 6" 6" 301⁄2" (See note) ⁄4" Drain 3 Press/temp gauge 28 ⁄4" (See note) 3 Junction box Sediment trap required 251⁄8" (See note) LEFT END VIEW Vent connector 281⁄2" (See note) 11⁄2" return tapping 11⁄4" cir. flange A Jacket B NOTE: Height dimensions increase by 11⁄2" and depth increases to 281⁄2" when combustible floor kit is used. FRONT VIEW RIGHT END VIEW Dimensions VSPH-60 VSPH-90 VSPH-120 VSPH-150 VSPH-180 “A” 111⁄8" 141⁄8" 171⁄8" 201⁄8" 231⁄8" “B” 173⁄8" 203⁄8" 233⁄8" 263⁄8" 293⁄8" Supply water tapping Circulator return flange* Gas tapping, natural or propane 11⁄2" 11⁄4" 1 ⁄2" 6" *2" 12" s 6" *2" 6" AL 29-4C is a registered trademark of Allegheny Ludlum Corp. *When not equipped with circulator, boiler 11⁄2" return tapping. 12 " * 6" for enclosed Minimum clearance dimensions SLANT/FIN CORPORATION, Greenvale, NY 11548 • Phone: (516) 484-2600 FAX: (516) 484-5921 • In Canada: Slant/Fin LTD/LTEE, Mississauga, Ontario www.slantfin.com ©Slant/Fin Corp. 2007
