Download Rocketfish RF-CARMNT2 User's Manual

RF-CARMNT2 I iPad 2 Car Mount
Quick Setup Guide
Setting up the car mount
4 Slide the brackets through the headrest posts.
1 Open the stand locks.
General description
Congratulations on your purchase of the iPad 2 car mount. The iPad car
mount securely holds your iPad 2 for use or display.
Package contents
5 Close the stand’s locks.
2 Lift the headrest on the front seat.
6 Close the stand locks.
Sleeve
Stand with base pre-installed
acket to
o aan aangle that will allow the
e bra
h
3 Rotate the brackets
bracketss fi
fit through
the headrest posts.
7 Put your iPad 2 into the sleeve by placing
the bottom of your iPad 2 into the
bottom of the sleeve, then
pressing the top of your iPad 2
into the sleeve.
8 While pressing the latches on the stand, slide the sleeve into the stand.
To release the sleeve:
• While pressing the latches on the stand, pull the sleeve away from the
stand.
Caution: Be very careful and make sure the sleeve is securely mounted to
the stand before releasing it.
Cable management:
o the
e 30
30sslot.
o Clips also h
• Plug the charging cable into
30-pin slo
help to hold
one cabl
cable
ables
able
les
ess in
in pla
p
lace
ace w
n the move
move.
charging cable and headphone
cables
place
while on
30pi
n
9 The stand rotates for 90° viewing your iPad 2 vertically or horizontally.
Caution: Be very careful and make sure the sleeve is securely mounted
to the stand before releasing it.
30pi
n
One-year limited warranty
Visit www.rocketfishproducts.com for details.
Contact Rocketfish:
For customer service please call 1-800-620-2790
www.rocketfishproducts.com
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, Minnesota, 55423-3645 USA
© 2011 BBY Solutions, Inc. All rights reserved. ROCKETFISH is a trademark of BBY
Solutions, Inc. All other products and brand names are trademarks of their
respective owners.
ENGLISH 11-0499