Download Pioneer DEH-1500RXU/EW User's Manual
Transcript
Service Manual ORDER NO. CRT2969 DEH-1500R/XU/EW HIGH POWER CD PLAYER WITH RDS TUNER DEH-1500R DEH-1530R XU/EW XU/EW HIGH POWER CD PLAYER WITH FM/MW/LW TUNER DEH-1510 XU/EE - This service manual should be used together with the following manual(s): Model No. CX-3026 Order No. CRT2944 Mech. Module Remarks S10 CD Mech. Module:Circuit Description, Mech.Description, Disassembly For details, refer to "Important symbols for good services". PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O.Box 1760, Long Beach, CA 90801-1760 U.S.A. PIONEER EUROPE NV Haven 1087 Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE.LTD. 253 Alexandra Road, #04-01, Singapore 159936 C PIONEER CORPORATION 2002 K-ZZU. NOV. 2002 Printed in Japan 1 A 2 3 4 SAFETY INFORMATION This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair complex products such as those covered by this manual. Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty. If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so and refer the repair to a qualified service technician. B 1. Safety Precautions for those who Service this Unit. • When checking or adjusting the emitting power of the laser diode exercise caution in order to get safe, reliable results. Caution: 1. During repair or tests, minimum distance of 13cm from the focus lens must be kept. 2. During repair or tests, do not view laser beam for 10 seconds or longer. 2. A “CLASS 1 LASER PRODUCT” label is affixed to the bottom of the player. 3. The triangular label is attached to the mechanism unit frame. C CLASS 1 LASER PRODUCT D 4. Specifications of Laser Diode Specifications of laser radiation fields to which human access is possible during service. Wavelength = 800 nanometers E F 2 DEH-1500R/XU/EW 1 2 3 4 5 6 7 8 A [ Important symbols for good services ] In this manual, the symbols shown-below indicate that adjustments, settings or cleaning should be made securely. When you find the procedures bearing any of the symbols, be sure to fulfill them: 1. Product safety You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and should keep the safety during servicing by following the safety instructions described in this manual. 2. Adjustments To keep the original performances of the product, optimum adjustments or specification confirmation is indispensable. In accordance with the procedures or instructions described in this manual, adjustments should be performed. B 3. Cleaning For optical pickups, tape-deck heads, lenses and mirrors used in projection monitors, and other parts requiring cleaning, proper cleaning should be performed to restore their performances. 4. Shipping mode and shipping screws To protect the product from damages or failures that may be caused during transit, the shipping mode should be set or the shipping screws should be installed before shipping out in accordance with this manual, if necessary. 5. Lubricants, glues, and replacement parts C Appropriately applying grease or glue can maintain the product performances. But improper lubrication or applying glue may lead to failures or troubles in the product. By following the instructions in this manual, be sure to apply the prescribed grease or glue to proper portions by the appropriate amount.For replacement parts or tools, the prescribed ones should be used. D E F 3 DEH-1500R/XU/EW 5 6 7 8 1 A 2 3 4 CONTENTS SAFETY INFORMATION ............................................................................................................................................2 1. SPECIFICATIONS .......................................................................................................................................................5 2. EXPLODED VIEWS AND PARTS LIST.......................................................................................................................7 2.1 PACKING(EW model)...........................................................................................................................................7 2.2 PACKING(EE model) ............................................................................................................................................8 2.3 EXTERIOR(EW model).......................................................................................................................................10 2.4 EXTERIOR(EE model) ........................................................................................................................................12 2.5 CD MECHANISM MODULE ...............................................................................................................................14 3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM ...................................................................................................16 3.1 BLOCK DIAGRAM ..............................................................................................................................................16 3.2 OVERALL CONNECTION DIAGRAM(GUIDE PAGE) ........................................................................................18 3.3 KEYBOARD UNIT ...............................................................................................................................................24 3.4 CD MECHANISM MODULE ...............................................................................................................................26 4. PCB CONNECTION DIAGRAM ................................................................................................................................30 4.1 TUNER AMP UNIT .............................................................................................................................................30 4.2 KEYBOARD UNIT ...............................................................................................................................................34 4.3 CD MECHANISM MODULE ...............................................................................................................................36 5. ELECTRICAL PARTS LIST ........................................................................................................................................38 6. ADJUSTMENT .........................................................................................................................................................43 6.1 CD ADJUSTMENT .............................................................................................................................................43 6.2 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT................................................................44 6.3 ERROR MODE ....................................................................................................................................................46 7. GENERAL INFORMATION .......................................................................................................................................47 7.1 DIAGNOSIS ........................................................................................................................................................47 7.1.1 DISASSEMBLY ..............................................................................................................................................47 7.1.2 CONNECTOR FUNCTION DESCRIPTION ....................................................................................................52 7.2 PARTS .................................................................................................................................................................53 7.2.1 IC ....................................................................................................................................................................53 7.2.2 DISPLAY.........................................................................................................................................................61 7.3 OPERATIONAL FLOW CHART...........................................................................................................................63 7.4 CLEANING ..........................................................................................................................................................64 8. OPERATIONS ...........................................................................................................................................................65 B C D E - CD Player Service Precautions F 1. Before disassembling the unit, be sure to turn off the power. Unplugging and plugging the connectors during power-on mode may damage the ICs inside the unit. 2. To protect the pickup unit from electrostatic discharge during serviving, take an appropriate treatment(shorting-solder) by referring to "the DISASSEMBLY" on page 47. 4 3. After replacing the pickup unit, be sure to check the grating.(See p.44.) 4. In this product, because the memory capacity of the microcomputer is insufficient, the test mode is not installed. However grating of the pickup unit can be confirmed. DEH-1500R/XU/EW 1 2 3 4 5 6 7 8 1. SPECIFICATIONS A EW model B C D E F 5 DEH-1500R/XU/EW 5 6 7 8 1 A 2 3 4 3 4 EE model B C D E F 6 DEH-1500R/XU/EW 1 2 6 5 8 7 2. EXPLODED VIEWS AND PARTS LIST A 2.1 PACKING(EW model) 14 7 3 5 4 B C NOTE: - Parts marked by “*” are generally unavailable because they are not in our Master Spare Parts List. - Screws adjacent to ∇ mark on the product are used for disassembly. D - For the applying amount of lubricants or glue, follow the instructions in this manual. (In the case of no amount instructions, apply as you think it appropriate.) - PACKING(EW model) SECTION PARTS LIST Mark No. Description * 1 2 3 4 5 * * 6 7-1 7-2 7-3 7-4 Part No. Mark No. Description Part No. Cord Assy Screw Handle Bush Polyethylene Bag CDE7059 CBA1002 CNC5395 CNV3930 E36-615 8 Carton(DEH-1500R) Carton(DEH-1530R) 9 Contain Box(DEH-1500R) Contain Box(DEH-1530R) 10 Protector CHG4985 CHG4986 CHL4985 CHL4986 CHP2663 Polyethylene Bag Owner’s Manual Installation Manual Passport Warranty Card CEG-162 CRD3662 CRD3663 CRY1013 CRY1157 11 12 13 14 CHP2664 CXB3520 CBA1488 CEA3094 Protector Case Assy Fixing Screw(M2x4) Accessory Assy E - Owner's Manual, Installation Manual Model DEH-1500R/XU/EW DEH-1530R/XU/EW Part No. CRD3662 CRD3663 Language English,Spanish,German, French,Italian,Dutch F 7 DEH-1500R/XU/EW 5 6 7 8 1 A 2 3 4 2.2 PACKING(EE model) 6 17 4 5 3 18 8 2 9 7 11 B 12 16 15 C 10 1 13 14 - PACKING(EE model) SECTION PARTS LIST D Mark No. Description * * E Part No. Mark No. Description 1 2 3 4 5 Cord Assy Spring Screw Polyethylene Bag Screw CDE7209 CBH1650 CBA1002 CEG-127 CRZ50P090FTC 6 7 8 9 10 Screw Polyethylene Bag Handle Bush Polyethylene Bag TRZ50P080FTC CEG-158 CNC5395 CNV3930 CEG-162 11-1 Owner’s Manual 11-2 Installation Manual * 11-3 Warranty Card 12 Carton 13 14 15 16 17 Contain Box Protector Protector Case Assy Accessory Assy 18 Fixing Screw(M2 x 4) Part No. CRD3671 CRY1157 CHG4990 CHL4990 CHP2663 CHP2664 CXB3520 CEA3438 CBA1488 CRD3670 - Owner's Manual, Installation Manual Model DEH-1510/XU/EE Part No. CRD3670 CRD3671 Language English,Russian F 8 DEH-1500R/XU/EW 1 2 3 4 5 6 7 8 A B C D E F 9 DEH-1500R/XU/EW 5 6 7 8 1 2 3 4 3 4 2.3 EXTERIOR(EW model) A B C D E F 10 DEH-1500R/XU/EW 1 2 6 5 8 7 - EXTERIOR(EW model) SECTION PARTS LIST Mark No. Description 1 2 3 4 5 Screw Screw Screw Cord Assy Cap A Mark No. Description Part No. Keyboard Unit(DEH-1530R) CWM8573 45 LCD(LCD1801) CAW1731 46 Connector(CN1801) CKS3580 47 Holder CNC9617 BSZ26P060FTC BSZ30P060FTC BSZ30P200FTC CDE7059 CKX-003 6 7 8 9 10 Cable CDE7113 Fuse(10A) CEK1208 CD Mechanism Module(S10)CXK5600 Case CNB2793 Holder CNC8659 11 12 13 14 15 Earth Plate CNC8915 Cushion CNM8275 Insulator CNM8059 Insulator CNM8174 Tuner Amp Unit(DEH-1500R) CWM8521 Tuner Amp Unit(DEH-1530R) CWM8565 16 17 18 19 20 Screw Screw Screw Pin Jack(CN352) Terminal(CN402) ASZ26P060FTC BPZ26P080FTC BSZ26P160FTC CKB1028 CKF1059 21 22 23 24 25 Plug(CN901) Connector(CN831) Connector(CN651) Connector(CN621) Antenna Jack(CN401) CKM1376 CKS3581 CKS3835 CKS4124 CKX1056 26 27 28 29 30 Holder Holder Heat Sink FM/AM Tuner Unit Holder CND1235 CND1328 CNR1668 CWE1645 CND1054 Part No. 48 49 50 51 52 Sheet Lens Lighting Conductor Rubber Connector CNM7932 CNV7060 CNV7367 CNV7368 CNV7369 53 Grille Unit(DEH-1500R) Grille Unit(DEH-1530R) 54 Chassis Unit(DEH-1500R) Chassis Unit(DEH-1530R) 55 Button CXB9504 CXB9866 CXB9541 CXB9544 CAC4836 56 57 58 59 60 CBH1835 CBH2208 CBH2367 CNC6791 CNC8042 Spring Spring Spring Bracket Holder 61 Cover 62 Panel(DEH-1500R) Panel(DEH-1530R) 63 Arm 64 Arm CNM6276 CNS7522 CNS7129 CNV4692 CNV4728 65 66 67 68 69 CNV5576 IMS20P030FZK ISS26P055FTC TDA7386 2SD2375 Arm Screw Screw IC(IC302) Transistor(Q911,921,991) B C D 31 Detach Grille Assy(DEH-1500R) CXB9441 Detach Grille Assy(DEH-1530R) CXB9568 32 Screw BPZ20P100FZK 33 Button(1-6) CAC7739 34 Button(Volume) CAC7740 35 36 37 38 39 Button(Up) Button(Down) Button(Eject) Button(Band) Button(Audio) 40 Button(SRC-EQ) 41 Button(DEH-1500R) Button(DEH-1530R) 42 Spring 43 Cover(DEH-1500R) Cover(DEH-1530R) CAC7741 CAC7742 CAC7743 CAC7745 CAC7746 E CAC7747 CAC7753 CAC5929 CBH2210 CNS7232 CNS7353 44 Keyboard Unit(DEH-1500R) F CWM8523 11 DEH-1500R/XU/EW 5 6 7 8 1 2 3 4 3 4 2.4 EXTERIOR(EE model) A B C D E F 12 DEH-1500R/XU/EW 1 2 6 5 8 7 - EXTERIOR(EE model) SECTION PARTS LIST Mark No. Description 1 2 3 4 5 Screw Screw Screw Cord Assy ••••• BSZ26P060FTC BSZ30P060FTC BSZ30P200FTC CDE7209 6 7 8 9 10 Cable CDE7113 Fuse(10A) CEK1208 CD Mechanism Module(S10) CXK5600 Case CNB2793 Holder CNC8659 11 12 13 14 15 Earth Plate Cushion Insulator Insulator Tuner Amp Unit CNC8915 CNM8275 CNM8059 CNM8174 CWM8567 16 17 18 19 20 Screw Screw Screw Pin Jack(CN352) Terminal(CN402) ASZ26P060FTC BPZ26P080FTC BSZ26P160FTC CKB1028 CKF1059 21 22 23 24 25 Plug(CN901) Connector(CN831) Connector(CN651) ••••• Antenna Jack(CN401) CKM1376 CKS3581 CKS3835 26 27 28 29 30 Holder Holder Heat Sink FM/AM Tuner Unit Holder CND1241 CND1328 CNR1668 CWE1648 CND1054 31 32 33 34 35 Detach Grille Assy Screw Button(1-6) Button(Volume) Button(Up) CXB9570 BPZ20P100FZK CAC7739 CAC7740 CAC7741 36 37 38 39 40 Button(Down) Button(Eject) Button(Band) Button(Audio) Button(SRC-EQ) CAC7742 CAC7743 CAC7745 CAC7746 CAC7749 41 42 43 44 45 Button Spring Cover Keyboard Unit LCD(LCD1801) CAC7753 CBH2210 CNS7232 CWM8575 CAW1735 46 Connector(CN1801) 47 Holder 48 Sheet A Mark No. Description Part No. Part No. 49 Lens 50 Lighting Conductor CNV7060 CNV7367 51 52 53 54 55 Rubber Connector Grille Unit Chassis Unit Button CNV7368 CNV7369 CXB9868 CXB9542 CAC4836 56 57 58 59 60 Spring Spring Spring Bracket Holder CBH1835 CBH2208 CBH2367 CNC6791 CNC8042 61 62 63 64 65 Cover Panel Arm Arm Arm CNM6276 CNS7238 CNV4692 CNV4728 CNV5576 66 67 68 69 Screw Screw IC(IC302) Transistor(Q911,921,991) IMS20P030FZK ISS26P055FTC TDA7386 2SD2375 B CKX1056 D E CKS3580 CNC9617 CNM7932 F 13 DEH-1500R/XU/EW 5 C 6 7 8 1 2 3 4 3 4 2.5 CD MECHANISM MODULE A B C D E C F 14 DEH-1500R/XU/EW 1 2 6 5 8 7 - CD MECHANISM MODULE SECTION PARTS LIST Mark No. Description 1 2 3 4 5 * Part No. Mark No. Description CD Core Unit(S10) Connector(CN101) Connector(CN701) Screw Screw CWX2708 CKS4182 CKS4188 BMZ20P035FTC BSZ20P040FTC 6 7 8 9 10 Screw(M2x4) Screw(M2x3) Screw(M2x3) Washer Washer CBA1362 CBA1511 CBA1527 CBF1037 CBF1038 11 12 13 14 15 Washer Spring Spring Spring Spring CBF1060 CBH2390 CBH2606 CBH2607 CBH2608 16 17 18 19 20 Spring Spring Spring Spring Spring CBH2609 CBH2610 CBH2611 CBH2612 CBH2613 21 22 23 24 25 Spring Spring Spring Spring Spring CBH2614 CBH2615 CBH2616 CBH2617 CBH2620 26 27 28 29 30 Spring Spring Spring Spring Spring CBH2621 CBH2641 CBH2642 CBH2643 CBH2659 31 32 33 34 35 Spring Spring Shaft Frame Frame CBH2688 CBL1614 CLA3845 CNC9962 CNC9963 36 37 38 39 40 Bracket Bracket Arm Arm Lever CNC9966 CNC9967 CNC9968 CNC9973 CNC9983 41 42 43 44 45 Lever Sheet Collar Guide Arm CNC9984 CNM8134 CNV6906 CNV6925 CNV7198 46 Rack 47 Holder A Part No. 48 Holder 49 Arm 50 Gear CNV7202 CNV7203 CNV7207 51 52 53 54 55 Gear Gear Gear Gear Gear CNV7208 CNV7209 CNV7210 CNV7211 CNV7212 56 57 58 59 60 Rack Arm Arm Guide Roller CNV7214 CNV7215 CNV7216 CNV7217 CNV7218 61 62 63 64 65 Gear Arm Arm Arm Damper CNV7219 CNV7221 CNV7220 CNV7222 CNV7313 66 67 68 69 70 Damper Arm Arm Guide Guide CNV7314 CNV7341 CNV7342 CNV7360 CNV7361 71 72 73 74 75 Holder Arm Gear Damper Motor Unit(M1) CNV7437 CNV7444 CNV7595 CNV7618 CXB6007 76 77 78 79 80 Chassis Unit Screw Unit Gear Unit Arm Unit Arm Unit CXB8728 CXB8729 CXB8731 CXB8732 CXB8735 81 82 83 84 85 Arm Unit Motor Unit(M2) Bracket Screw Screw(M2x5) CXB8852 CXB8933 CNC9985 JFZ20P020FTC EBA1028 86 87 88 89 90 Screw JFZ20P020FTC Screw JGZ17P022FTC Washer YE15FTC Washer YE20FTC Pickup Unit(Service)(P10) CXX1641 91 Screw B C D IMS26P030FMC CNV7199 CNV7201 F 15 DEH-1500R/XU/EW 5 E 6 7 8 1 2 3 4 3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM 3.1 BLOCK DIAGRAM - EW MODEL A TUNER AMP UNIT A OSC B ANTENNA CN402 AM ANT 1 ATT 3 FM ANT ATT RDS_HSLK RDS_CK RDS_DATA 18 19 20 21 RDS_LOCK 14 DO 11 LDET DI 5V CK SL CE2 IC 3 EEPROM 5.0V 10 9 8 CE1 5 ROM_VDD 13 CE2 IC 5 3.3V ← 6 TUNPDO TUNPDI TUNPCK VDD CE1 LPF FMRF IC 2 2.5V IC 1 3.3V FMRF ANT adj Q401 Lch MIXER, IF AMP 23 DET, FM MPX, RDS DECODER RF adj Q402 T51 CF52 4 VDD_3.3 C 3.3V IC 4 3.3V 2.5V 2.5V ← VCC CF51 17 2 TUN3V IN2_ VCC 3 PICKUP UNIT (SERVICE)(P10) C D CD CORE UNIT(S10) CN101 Q101 LASER DIODE LD+ MD FOCUS ACT. MONITOR TRACKING ACT. DIODE 2 5 LOADING/ CARRIAGE MOTOR PD LOUT xtal LOUT 20 1 4 FOP TOP FD, TD, SD, MD 42 ACT,MOTOR DRIVER M 16 SOP 15 SOM 17 LCOM 18 LCOP M LOEJ CONT 8 14 LOUT 23 X201 SERVO XTAL CONTROL, DSP, LPF, DAC 12 FOP 13 TOP SPINDLE MOTOR LD AC, F, E, BD FOP TOP CN651 CN701 1 14 HOLOGRAM UNIT D IN3_ 24 CO IC 201 UPD63712GC LIMIT HOME 22 LOEJ 9 CONT LOEJ 5 29 17 7 15 CONT 28 DSCSNS 65 LOE CON IC 301 BA5996FP DSCSNS CLMP 6 16 11 11 1 2 21 VD 20 DSC 27 CLAMSW CLA Q991 CLAMP E 12EJ 8EJ DSCSNS VD VD B.U VDD 3.3V REGULATOR 3R3V 3 IC 701 1 5 4 16 XSI 1 Q992 IC652 TC7SET08FU NJM2391DL1-33 41 VDCONT F 16 DEH-1500R/XU/EW 1 2 3 4 VDC 6 5 8 7 A CN352 55 CE1 REAR L CH TUNPCE2 Q 352 56 TUNPCE1 11 TUNPDI 12 TUNPDO 13 TUNPCK 76 401 59 58 402 57 62 B Q453 LDET SL VDD REGULATOR Q911 RDS57K VDD RDSLK B.U RDT RCK SYS 8V REGULATOR VCK VDT VST Q922 Q921 VCC SYSTEM CONTROLLER CN901 B.U SYSPW IC 601 (1/2) PE5329A BACKUP B.U Q923 16 FUSE 61 10A CE2 C 16 2 POWER AMP VST/ VCK/ VDT IN2_L ELECTRONIC VOLUME 3 IN3_L IC 151 PML003AM Frontout_L Rearout_L 10 14 IC 302 PAL007A FL 12 RL 11 MUTE STBY 22 4 SYSTEM CONTROLLER IC 601(2/2) PE5329A TUN3V ASENS BSENS ANTIN 29 28 65 LOEJ CONT 4 TELIN SYSPW 64 FL+ 3 RL- 5 RL+ ANTPW TUN 3V IC 901 BA033SFP FL- 21 15 7 7 5 5 8 8 6 6 14 14 GND BACK UP GND FLFL+ RLRL+ SYSPW Q452 MUTE 23 15 Q931 asens ACC 1 ACC bsens 4 D B.U VCC Q951 TELIN 63 TELEPHONE MUTE 9 9 TELEPHONE MUTE 49 34 43 6 B.REMOTE IC 551 TPD1018F B.REM 1 11 11 B.REM DSCSNS 27 CLAMSW MUTE 48 B 16 E XSI CN831 41 KEYBOARD UNIT CN1801 BACK UP KEY CONTROLLER LCD DRIVER VDCONT KYDT DPDT RESET 8 KYDT 9 DPDT 60 1 RESET IC 961 603 S-80834CNY S-80834ANY 2 3 3 20 4 4 18 5 5 B. REM GND ACC KYDT RR FR FL RL - RR + FR + FL + RL + LCD DPDT VDD VDD SW5V SWVDD 21 56 VDD 10 VLCD Q801 IC 1801 PD6340A F KEY MATRIX 17 DEH-1500R/XU/EW 5 6 7 8 1 2 3 4 3.2 OVERALL CONNECTION DIAGRAM(GUIDE PAGE) Note: When ordering service parts, be sure to refer to " EXPLODED VIEWS AND PARTS LIST" or "ELECTRICAL PARTS LIST". A-a A A-a A-b Large size SCH diagram C A-a A-a A-b A-b CN701 Guide page Detailed page B C FM/AM TUNER UNIT D E B CN1801 NOTE : Symbol indicates a resistor. No differentiation is made between chip resistors and discrete resistors. Symbol indicates a capacitor. No differentiation is made between chip capacitors and discrete capacitors. F Decimal points for resistor and capacitor fixed values are expressed as : 2.2 ← 2R2 0.022 ← R022 The > mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation. A 18 DEH-1500R/XU/EW 1 2 3 4 5 6 8 7 A-b A A TUNER AMP UNIT REAR L CH REAR R CH B C EW model CEK1136 > BACK UP 600µH GND ACC B.REM TEL MUTE RLFLRL+ FL+ D RRFRRR+ FR+ BACK UP B. REM GND ACC RR FR FL RL - RR + FR + FL + RL + EE model GND RL- E FLRL+ FL+ RRFRRR+ FR+ F A 19 DEH-1500R/XU/EW 5 6 7 8 1 A-b 2 3 1 4 2 3 C CN701 A B A-a A-b C D E FM/AM TUNER UNIT F A-a 20 DEH-1500R/XU/EW 1 2 3 4 5 6 7 7 A-a A-b 4 Decimal points for resistor and capacitor fixed values are expressed as : 2.2 ← 2R2 0.022 ← R022 6 The > mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation. NOTE : Symbol indicates a resistor. No differentiation is made between chip resistors and discrete resistors. Symbol indicates a capacitor. No differentiation is made between chip capacitors and discrete capacitors. CN1801 B 5 8 5 A-b A B C DEH-1500R/XU/EW 8 D E NIT F A-a 21 A-a A-b 600µH B A TUNER AMP UNIT A-b 1 > A CEK1136 22 2 C D E F 1 2 3 3 DEH-1500R/XU/EW 4 TEL MUTE B.REM ACC 3 GND 2 BACK UP EW model REAR R CH REAR L CH 1 4 A-a A-b 600µH 5 B. REM 4 6 FR+ FRRR+ RR- FL+ RL+ FL- RL- GND EE model GND ACC BACK UP FR+ RR+ FR- RR- FL+ RL+ FL- RL- TEL MUTE B.REM ACC GND BACK UP RR FR FL RL - RR + FR + FL + RL + 5 6 7 7 8 A B C D E F 5 A-b DEH-1500R/XU/EW 8 23 1 A 2 3 4 3 4 3.3 KEYBOARD UNIT B C D E F B 24 DEH-1500R/XU/EW 1 2 6 5 7 8 A B KEYBOARD UNIT B A CN831 EQ C LOUD TA:EW CLOCK:EE 40mA, 14V LOC/BSM D E F B 25 DEH-1500R/XU/EW 5 6 7 8 1 2 3 4 3.4 CD MECHANISM MODULE A Pickup Unit(Service)(P10) # F B F T T T T F F T T F T T F F F F F T T ! C 0 1 9 D MOTOR DRIVER @ S T SPINDLE MOTOR LOADING/CARRIAGE MOTOR M2 CXB8933 E 7 S M1 CXB6007 5 C F S 8 6 C 3 C C C F F T S S T 3.3V REGULATOR F C 26 DEH-1500R/XU/EW 1 2 3 4 6 5 8 7 A F TRACKING SERVO LINE C CARRIAGE SERVO LINE S SPINDLE SERVO LINE F T C S T SIGNAL LINE FOCUS SERVO LINE B SWITCHES: CD CORE UNIT S901 : HOME SWITCH.....ON-OFF S902 : CLAMP SWITCH....ON-OFF S903 : DSCSNS SWITCH....ON-OFF S904 : 12EJ SWITCH....ON-OFF S905 : 8EJ SWITCH....ON-OFF The underlined indicates the switch position. RF AMP / SERVO / DSP DAC / LPF C C 9 CD CORE UNIT (S10) D 4 2 A CN651 @ S 5 C E 6 3 $% F C 27 DEH-1500R/XU/EW 5 6 7 8 1 2 - Waveforms A 1 DSCSNS 2 CLCONT 3 LOEJ 4 VD B 5V/div 5V/div 5V/div 10V/div 3 4 Note : 1. The encircled numbers denote measuring points in the circuit diagram. 2. Reference voltage REFO1(1.65V) 500ms/div 1 DSCSNS 2 CLCONT 3 LOEJ 4 VD 5V/div 5V/div 5V/div 10V/div 500ms/div 5 SIN 6 CIN 7 TIN 1V/div 2s/div 500mV/div 500mV/div When loading a 12cm CD When loading an 8cm CD When setting up after loading a 12cm CD-DA disc Ref.: GND Ref.: GND Ref.: REFO Mode: Normal Mode: Normal Mode: Normal 8 FIN 9 RFOK 5 SIN 200mV/div 500ms/div 0 TE 2V/div ! FE 2V/div 500mV/div 200ms/div ! FE 500mV/div 8 FIN 0 TE 7 TIN 500mV/div 20ms/div 500mV/div 500mV/div 500mV/div When setting up "Source On"(12cm CD-DA) When setting up "Source On" During "Play"(CD-DA) Ref.: REFO Ref.: REFO Ref.: REFO Mode: Normal Mode: Normal Mode: Normal C @ MDX 5 SIN 500mV/div 5ms/div 1V/div @ MDX 5 SIN 500mV/div 5µs/div 1V/div # RFAGC 500mV/div 0.5µs/div D E Spindle waveform during "Play" Spindle waveform during "Play"(Magnified) Ref.: REFO Ref.: REFO Ref.: REFO Mode: Normal Mode: Normal Mode: Normal 8 FIN ! FE 500mV/div 200ms/div 0 TE 500mV/div # RFAGC 500mV/div 2ms/div 500mV/div RF eye pattern # RFAGC 0 TE 7 TIN Focus Search When "Tracking Open" 1 Track Jump Ref.: REFO Ref.: REFO Ref.: REFO Mode: TEST Mode: TEST Mode: TEST 1V/div 500µs/div 500mV/div 500mV/div F 28 DEH-1500R/XU/EW 1 2 3 4 6 5 # RFAGC 0 TE 7 TIN 1V/div 500ms/div # RFAGC 500mV/div 0 TE 500mV/div 7 TIN 8 7 1V/div 5ms/div 500mV/div 500mV/div # RFAGC 7 TIN 0 TE 8 FIN 1V/div 1V/div 1V/div 1V/div 500µs/div 32 Track Jump 100(32x3) Track Jump When reproducing black dots(1mm) Ref.: REFO Ref.: REFO Ref.: REFO Mode: TEST Mode: TEST Mode: Normal # RFAGC 0 TE 6 CIN 5 SIN 500µs/div # RFAGC 1V/div 1V/div 0 TE 500mV/div 6 CIN 2V/div 5 SIN 5ms/div 1V/div 1V/div 500mV/div 2V/div # RFAGC 0 TE 6 CIN 5 SIN B 500µs/div 1V/div 1V/div 500mV/div 2V/div When reproducing scratch(1mm) When reproducing fingerprint(65µm) During inside/outside search (outer circumference → inner circumference) Ref.: REFO Ref.: REFO Ref.: REFO Mode: Normal Mode: Normal Mode: Normal $ LOUT % ROUT 1V/div 1V/div 200µs/div 1 DSCSNS 5V/div 2 CLCONT 5V/div 3 LOEJ 5V/div A 200ms/div 1 DSCSNS 5V/div 2 CLCONT 5V/div 3 LOEJ 5V/div Analog Audio When "Eject"(12cm CD) When "Eject"(8cm CD) Ref.: AGND Ref.: GND Ref.: GND Mode: Normal Mode: Normal Mode: Normal C 200ms/div D E F 29 DEH-1500R/XU/EW 5 6 7 8 1 2 3 4 4. PCB CONNECTION DIAGRAM 4.1 TUNER AMP UNIT A NOTE FOR PCB DIAGRAMS 1.The parts mounted on this PCB include all necessary parts for several destination. For further information for respective destinations, be sure to check with the schematic diagram. 2.Viewpoint of PCB diagrams Connector A TUNER AMP UNIT CORD ASSY Capacitor SIDE A B P.C.Board Chip Part SIDE B C D C CN701 E F B A 30 CN1801 DEH-1500R/XU/EW 1 2 3 4 5 6 8 7 A SIDE A ANTENNA B FM/AM TUNER UNIT C D E F A FRONT 31 DEH-1500R/XU/EW 5 6 7 8 1 2 3 4 3 4 A A TUNER AMP UNIT B C D E F A 32 DEH-1500R/XU/EW 1 2 5 6 7 8 A SIDE B B C D E F A 33 DEH-1500R/XU/EW 5 6 7 8 1 2 3 4 4.2 KEYBOARD UNIT B B SIDE A KEYBOARD UNIT SIDE B KEYBOARD UNIT BAND EJECT EJECT AUDIO A LOC/BSM LOUD B 4 5 6 C 3 D A 1 2 CN831 B SRC VOLEQ F EQ TA:EW CLOCK:EE VOL+ VOL+ VOL- E 34 DEH-1500R/XU/EW 1 2 3 4 5 6 7 8 A B C D E F 35 DEH-1500R/XU/EW 5 6 7 8 1 2 3 4 4.3 CD MECHANISM MODULE C SIDE A CD CORE UNIT(S10) A M2 LOADING /CARRIAGE MOTOR B M1 SPINDLE MOTOR C A CN651 D HOME E PICKUP UNIT (SERVICE)(P10) F C 36 DEH-1500R/XU/EW 1 2 3 4 6 5 C 8 7 SIDE B CD CORE UNIT(S10) A 8EJ 12EJ DSCSNS CLAMP B C D E F C 37 DEH-1500R/XU/EW 5 6 7 8 1 A 2 3 4 5. ELECTRICAL PARTS LIST NOTES: - Parts whose parts numbers are omitted are subject to being not supplied. - The part numbers shown below indicate chip components. Chip Resistor RS1/_S___J,RS1/__S___J Chip Capacitor (except for CQS.....) CKS....., CCS....., CSZS..... B =====Circuit Symbol and No.===Part Name --- ----------------------------------------------- A Part No. ------------------------- Unit Number : CWM8521(DEH-1500R) Unit Number : CWM8565(DEH-1530R) Unit Name : Tuner Amp Unit MISCELLANEOUS C D E F IC IC IC IC IC 151 302 551 601 652 IC IC IC IC IC PML003AM TDA7386 TPD1018F PE5329A TC7SET08FU IC IC Q Q Q 901 961 352 401 402 IC IC Transistor Transistor Transistor BA033SFP S-80834CNY IMH3A IMH1A IMH1A Q Q Q Q Q 452 453 801 821 822 Transistor Transistor Transistor Transistor Transistor DTC124EU DTA124EU 2SA1036K 2SA1036K DTC114EU Q Q Q Q Q 911 912 921 922 923 Transistor Transistor Transistor Transistor Transistor 2SD2375 IMD2A 2SD2375 2SB1243 DTC114EU Q Q Q Q D 931 951 991 992 452 Transistor Transistor Transistor Transistor Diode IMX1 2SA1037K 2SD2375 IMD2A DAN202U D D D D D 551 552 831 832 833 Diode Diode Diode Diode Diode S5688G S5688G 1SS133 1SS133 1SS133 D D D D D 834 835 836 901 902 Diode Diode Diode Diode Diode 1SS133 1SS133 1SS133 S5688G S5688G D D D D D 911 912 921 931 932 Diode Diode Diode Diode Diode S5688G HZS6L(B2) HZS9L(B3) HZS7L(C3) HZS7L(A1) D D L L L 951 991 151 401 402 Diode Diode Inductor Inductor Inductor DAN202U HZS9L(B1) LAU2R2K LAU1R0K LAU1R0K L L L 404 601 801 Ferri-Inductor Inductor Inductor LAU4R7K LAU1R0K LAU2R2K 38 =====Circuit Symbol and No.===Part Name --- ----------------------------------------------- Part No. ------------------------- L L 901 951 Choke Coil 600µH Inductor CTH1280 LAU2R2K X AR 601 401 Radiator 12.58291MHz Arrester FM/AM Tuner Unit CSS1402 DSP-201M CWE1645 RESISTORS R R R R R 151 152 153 154 155 RD1/4PU472J RD1/4PU472J RS1/16S101J RS1/16S101J RS1/16S101J R R R R R 156 157 301 353 354 RS1/16S101J RAB4C102J RD1/4PU153J RS1/16S821J RS1/16S821J R R R R R 357 358 401 402 403 RS1/16S223J RS1/16S223J RS1/16S223J RS1/16S223J RS1/16S223J R R R R R 404 405 406 407 408 RS1/16S223J RS1/16S681J RS1/16S681J RS1/16S681J RS1/16S681J R R R R R 409 410 414 420 454 RS1/16S681J RS1/16S681J RS1/16S0R0J RS1/16S681J RS1/16S103J R R R R R 455 456 457 601 603 RS1/16S153J RS1/16S221J RD1/4PU681J RS1/16S473J RS1/16S103J R R R R R 604 605 606 607 608 RS1/16S103J RS1/16S221J RS1/16S104J RD1/4PU222J RS1/16S0R0J R R R R R 609 610 611 621 622 RD1/4PU473J RD1/4PU681J RS1/16S473J RD1/4PU102J RD1/4PU102J R R R R R 653 654 661 801 802 RS1/16S104J RS1/16S102J RS1/16S221J RS1/16S153J RS1/16S153J R 803 RS1/16S222J DEH-1500R/XU/EW 1 2 3 4 5 6 7 8 =====Circuit Symbol and No.===Part Name --- ----------------------------------------------- Part No. ------------------------- =====Circuit Symbol and No.===Part Name --- ----------------------------------------------- Part No. ------------------------- R R R R 821 823 833 834 RD1/4PU332J RS1/16S103J RD1/4PU222J RD1/4PU222J C 317 CKSQYB102K50 R R R R R 836 837 838 841 848 RD1/4PU104J RD1/4PU103J RD1/4PU102J RS1/16S1R0J RD1/4PU102J C C C C C 318 319 320 321 353 CKSQYB102K50 CKSQYB102K50 CKSQYB102K50 CKSQYB102K50 CEJQ2R2M50 R R R R R 851 911 912 921 923 RD1/4PU102J RS1/16S223J RD1/4PU152J RS1/16S0R0J RD1/4PU821J C C C C C 354 360 401 402 403 CEJQ2R2M50 CKSQYB103K50 CKSRYB103K50 CKSRYB103K50 CEJQ470M6R3 R R R R R 924 925 931 932 933 RD1/4PU122J RS1/16S103J RS1/16S473J RS1/16S104J RD1/4PU102J C C C C C 404 405 407 420 451 CEJQ101M10 CKSRYB103K50 CKSYB475K10 CCSRCH470J50 CEJQ330M10 R R R R R 934 935 936 940 941 RS1/16S472J RS1/16S473J RS1/16S223J RS1/16S104J RS1/16S104J C C C C C 551 552 601 604 605 CKSQYB103K50 CKSQYB103K50 CKSRYB103K50 CCSRCH200J50 CCSRCH200J50 R R R R R 951 952 953 954 955 RD1/4PU153J RS1/16S472J RS1/16S472J RS1/16S102J RS1/16S473J C C C C C 610 611 612 654 801 CEJQ4R7M35 CKSRYB224K16 CCSRCH470J50 CKSRYB104K16 CKSRYB104K16 R R R R R 961 962 971 991 992 RD1/4PU102J RS1/16S822J RS1/16S0R0J RD1/4PU221J RD1/4PU221J C C C C C 901 911 912 913 921 R R 993 994 RS1/16S222J RS1/16S472J C C C C C 922 923 961 963 981 CEJQ101M16 CKSRYB103K50 CKSRYB473K50 CEJQ100M16 CKSRYB334K10 C C C C 982 983 991 992 CKSRYB103K50 CEJQ220M16 CKSRYB473K50 CEJQ101M10 CAPACITORS C C C C C 151 152 153 154 155 CKSRYB224K16 CKSRYB224K16 CKSRYB105K10 CKSRYB105K10 CEJQ4R7M35 C C C C C 156 157 158 159 160 CEJQ4R7M35 CKSRYB153K50 CKSRYB153K50 CKSRYB104K16 CKSRYB104K16 C C C C C 161 162 163 164 165 CCSRCH100D50 CCSRCH100D50 CCSRCH100D50 CCSRCH100D50 CKSRYB104K16 C C C C C 166 167 301 302 303 CEJQ470M10 CEJQ100M16 CFTNA224J50 CFTNA224J50 CFTNA224J50 C C C C C 304 309 310 311 312 CFTNA224J50 CKSQYB225K10 CKSQYB225K10 CEJQ2R2M50 CEJQ100M16 C C C C 313 314 315 316 CKSRYB104K16 CKSQYB102K50 CKSQYB102K50 CKSQYB102K50 A 3300µF/16V 470µF/16V 330µF/16V 6 B C CCH1494 CEJQ470M10 CKSRYB103K50 CCH1331 CCH1326 D Unit Number : CWM8567(DEH-1510) Unit Name : Tuner Amp Unit MISCELLANEOUS IC IC IC IC IC 151 302 551 601 652 IC IC IC IC IC PML003AM TDA7386 TPD1018F PE5330A TC7SET08FU IC IC Q Q Q 901 961 352 452 453 IC IC Transistor Transistor Transistor BA033SFP S-80834CNY IMH3A DTC124EU DTA124EU Q Q Q Q Q 801 821 822 911 912 Transistor Transistor Transistor Transistor Transistor 2SA1036K 2SA1036K DTC114EU 2SD2375 IMD2A Q Q Q Q Q 921 922 923 931 951 Transistor Transistor Transistor Transistor Transistor 2SD2375 2SB1243 DTC114EU IMX1 2SA1037K Q Q 991 992 Transistor Transistor 2SD2375 IMD2A E F 39 DEH-1500R/XU/EW 5 A 7 8 1 A B C 2 3 =====Circuit Symbol and No.===Part Name --- ----------------------------------------------- Part No. ------------------------- =====Circuit Symbol and No.===Part Name --- ----------------------------------------------- Part No. ------------------------- D D D 452 551 552 Diode Diode Diode DAN202U S5688G S5688G D D D D D 831 832 833 834 835 Diode Diode Diode Diode Diode 1SS133 1SS133 1SS133 1SS133 1SS133 R R R R R 661 801 802 803 821 RS1/16S221J RS1/16S153J RS1/16S153J RS1/16S222J RD1/4PU332J D D D D D 836 901 902 911 912 Diode Diode Diode Diode Diode 1SS133 S5688G S5688G S5688G HZS6L(B2) R R R R R 823 833 834 836 837 RS1/16S103J RD1/4PU222J RD1/4PU222J RD1/4PU104J RD1/4PU103J D D D D D 921 931 932 951 991 Diode Diode Diode Diode Diode HZS9L(B3) HZS7L(C3) HZS7L(A1) DAN202U HZS9L(B1) R R R R R 838 841 848 851 911 RD1/4PU102J RS1/16S1R0J RD1/4PU102J RD1/4PU102J RS1/16S223J L L L L L 151 401 402 404 601 Inductor Inductor Inductor Ferri-Inductor Inductor LAU2R2K LAU1R0K LAU1R0K LAU4R7K LAU1R0K R R R R R 912 921 923 924 925 RD1/4PU152J RS1/16S0R0J RD1/4PU821J RD1/4PU122J RS1/16S103J L L L X 801 901 951 601 Inductor Choke Coil 600µH Inductor Radiator 12.58291MHz FM/AM Tuner Unit LAU2R2K CTH1280 LAU2R2K CSS1402 CWE1648 R R R R R 931 932 933 934 935 RS1/16S473J RS1/16S104J RD1/4PU102J RS1/16S472J RS1/16S473J AR 401 Arrester DSP-201M R R R R R 936 940 941 951 952 RS1/16S223J RS1/16S104J RS1/16S104J RD1/4PU153J RS1/16S472J R R R R R 953 954 955 961 962 RS1/16S472J RS1/16S102J RS1/16S473J RD1/4PU102J RS1/16S822J R R R R R 971 991 992 993 994 RS1/16S0R0J RD1/4PU221J RD1/4PU221J RS1/16S222J RS1/16S472J RESISTORS D E F 4 R R R R R 153 154 155 156 157 RS1/16S101J RS1/16S101J RS1/16S101J RS1/16S101J RAB4C102J R R R R R 301 353 354 357 358 RD1/4PU153J RS1/16S821J RS1/16S821J RS1/16S223J RS1/16S223J R R R R R 405 407 408 409 410 RS1/16S681J RS1/16S681J RS1/16S681J RS1/16S681J RS1/16S681J C C C C C 151 152 153 154 155 CKSRYB224K16 CKSRYB224K16 CKSRYB105K10 CKSRYB105K10 CEJQ4R7M35 R R R R R 414 420 421 454 455 RS1/16S0R0J RS1/16S681J RS1/16S473J RS1/16S103J RS1/16S153J C C C C C 156 157 158 161 162 CEJQ4R7M35 CKSRYB153K50 CKSRYB153K50 CCSRCH100D50 CCSRCH100D50 R R R R R 456 457 601 602 603 RS1/16S221J RD1/4PU681J RS1/16S104J RS1/16S473J RS1/16S103J C C C C C 163 164 165 166 167 CCSRCH100D50 CCSRCH100D50 CKSRYB104K16 CEJQ470M10 CEJQ100M16 R R R R R 604 605 606 607 608 RS1/16S103J RS1/16S221J RS1/16S104J RD1/4PU222J RS1/16S0R0J C C C C C 301 302 303 304 309 CFTNA224J50 CFTNA224J50 CFTNA224J50 CFTNA224J50 CKSQYB225K10 R R R R R 609 610 611 653 654 RD1/4PU473J RD1/4PU681J RS1/16S473J RS1/16S104J RS1/16S102J C C C C C 310 311 312 313 353 CKSQYB225K10 CEJQ2R2M50 CEJQ100M16 CKSRYB104K16 CEJQ2R2M50 40 CAPACITORS DEH-1500R/XU/EW 1 2 3 4 6 5 8 7 =====Circuit Symbol and No.===Part Name --- ----------------------------------------------- Part No. ------------------------- =====Circuit Symbol and No.===Part Name --- ----------------------------------------------- Part No. ------------------------- C C C C C 354 360 401 402 403 CEJQ2R2M50 CKSQYB103K50 CKSRYB103K50 CKSRYB103K50 CEJQ470M6R3 R R R R 1812 1813 1814 1815 RS1/16S181J RS1/16S181J RS1/16S181J RS1/16S151J C C C C C 404 405 407 420 451 CEJQ101M10 CKSRYB103K50 CKSYB475K10 CCSRCH470J50 CEJQ330M10 R R R R R 1816 1816 1817 1817 1818 (DEH-1500R,1510) (DEH-1530R) (DEH-1500R,1510) (DEH-1530R) (DEH-1500R) RS1/16S151J RS1/16S181J RS1/16S151J RS1/16S181J RS1/16S151J 551 552 601 604 605 CKSQYB103K50 CKSQYB103K50 CKSRYB103K50 CCSRCH200J50 CCSRCH200J50 R R 1818 1819 (DEH-1530R,1510) C C C C C RS1/16S181J RS1/16S131J C C C C C 610 611 654 801 901 CEJQ4R7M35 CKSRYB224K16 CKSRYB104K16 CKSRYB104K16 CCH1494 C C C C C 911 912 913 921 922 C C C C C 923 961 963 981 982 CKSRYB103K50 CKSRYB473K50 CEJQ100M16 CKSRYB334K10 CKSRYB103K50 C C C 983 991 992 CEJQ220M16 CKSRYB473K50 CEJQ101M10 B 3300µF/16V CEJQ470M10 CKSRYB103K50 CCH1331 CCH1326 CEJQ101M16 470µF/16V 330µF/16V Unit Number Unit Number Unit Number Unit Name : : : : CWM8523(DEH-1500R) CWM8573(DEH-1530R) CWM8575(DEH-1510) Keyboard Unit MISCELLANEOUS IC 1801 D 1801 D 1802 D1803-1810 D1803-1810 IC Diode Diode LED(DEH-1500R) LED(DEH-1530R) PD6340A MA152WK MA152WA SML-310PT SML-310VT D D X IL IL 1811 1812 1801 1801 1801 LED LED Ceramic Resonator 5.00MHz Lamp 14V 40mA(DEH-1500R,1510) Lamp 14V 40mA(DEH-1530R) NSSW440-9159 NSSW440-9159 CSS1547 CEL1651 CEL1662 IL 1802 IL 1802 LCD1801 LCD1801 Lamp 14V 40mA(DEH-1500R,1510) Lamp 14V 40mA(DEH-1530R) LCD(DEH-1500R,1530R) LCD(DEH-1510) CEL1651 CEL1662 CAW1731 CAW1735 RESISTORS R R R R R 1801 1802 1803 1804 1805 RS1/16S222J RS1/16S222J RS1/16S471J RS1/16S471J RS1/16S471J R R R R R 1806 1807 1808 1809 1810 RS1/16S471J RS1/16S151J RS1/16S181J RS1/16S181J RS1/16S181J R 1811 RS1/16S151J CAPACITORS C C C B 1801 1811 1812 C CKSRYB103K50 CKSRYF104Z25 CKSRYF104Z25 Unit Number : CWX2708 Unit Name : CD Core Unit(S10) MISCELLANEOUS IC IC IC Q D 201 301 701 101 101 IC IC IC Transistor Diode UPD63712GC BA5996FP NJM2391DL1-33 2SB1132 1SS355 D X S S S 701 201 901 902 903 Diode Ceramic Resonator 16.934MHz Spring Switch(HOME) Spring Switch(CLAMP) Spring Switch(DSCSNS) 1SR154-400 CSS1603 CSN1051 CSN1051 CSN1052 S S 904 905 Spring Switch(12EJ) Spring Switch(8EJ) CSN1051 CSN1051 5 C RESISTORS R R R R R 101 102 103 104 105 RS1/10S1R5J RS1/10S1R5J RS1/10S1R5J RS1/10S1R5J RS1/10S1R5J R R R R R 201 202 203 204 205 RS1/16S102J RS1/16S1002D RS1/16S1002D RS1/16S1002D RS1/16S1002D R R R R R 206 207 208 209 214 RS1/16S1002D RS1/16S1002D RS1/16S1002D RS1/16S1002D RS1/16S103J R R R R R 215 216 217 218 234 RS1/16S393J RS1/16S122J RS1/16S562J RS1/16S472J RS1/16S0R0J R R R R R 235 236 301 302 303 RS1/16S103J RS1/16S103J RS1/16S183J RS1/16S822J RS1/16S183J R R R R R 304 305 306 307 308 RS1/16S822J RS1/16S183J RS1/16S183J RS1/16S183J RS1/16S183J R 501 RS1/16S102J D E F 41 DEH-1500R/XU/EW 6 A 7 8 1 A B C D E 2 =====Circuit Symbol and No.===Part Name --- ----------------------------------------------- Part No. ------------------------- R R R R 503 505 506 507 RS1/16S102J RS1/16S102J RS1/16S221J RS1/16S221J R R R R R 508 509 601 602 603 RS1/16S221J RS1/16S221J RS1/16S101J RS1/16S101J RS1/16S0R0J R R R 901 902 903 RS1/16S104J RS1/16S473J RS1/16S273J 3 4 3 4 CAPACITORS C C C C C 101 102 103 104 106 C C C C C 108 109 201 202 203 C C C C C 205 206 207 208 209 C C C C C 210 211 212 213 214 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB332K50 CKSRYB473K25 C C C C C 215 216 217 218 219 CKSRYB104K16 CKSRYB103K25 CCSRCH560J50 CCSRCH5R0C50 CKSRYB104K16 C C C C C 220 221 222 223 224 CKSRYB104K16 CKSRYB104K16 CKSRYB103K25 CCSRCH680J50 CCSRCH470J50 C C C C C 225 231 232 301 302 CKSRYB682K50 CKSRYB102K50 CKSRYB102K50 CCH1504 CCSRCH221J50 C C C C C 303 304 305 306 501 C C C C C 502 702 703 704 705 100µF/16V 47µF/6.3V CKSRYB104K16 CKSRYB104K16 CCH1504 CCH1506 CCSRCH101J50 CKSRYB224K16 CKSRYB224K16 CKSRYB104K16 CKSRYB471K50 CKSRYB104K16 22µF/6.3V 100µF/6.3V 100µF/16V CCH1507 CKSRYB103K25 CKSRYB104K16 CCH1505 CKSRYB104K16 CCSRCH221J50 CKSRYB472K50 CKSRYB103K25 CKSRYB104K16 CKSRYB103K25 100µF/16V 10µF/6.3V CKSRYB103K25 CCH1504 CKSRYB224K16 CKSRYB104K16 CCH1470 Miscellaneous Parts List M M Pickup Unit(Service)(P10) Motor Unit(SPINDLE) Motor Unit(LOADING/CARRIAGE) 1 2 CXX1641 CXB6007 CXB8933 F 42 DEH-1500R/XU/EW 1 2 5 6 7 8 6. ADJUSTMENT A 6.1 CD ADJUSTMENT 1) Cautions on adjustments • In this product the single voltage (3.3V) is used for the regulator. The reference voltage is the REFO1 (1.65V) instead of the GND. If you should mistakenly short the REFO1 with the GND during adjustment, accurate voltage will not be obtained, and the servo’s misoperation will apply excessive shock to the pickup. To avoid such problems: a. Do not mix up the REFO1 with the GND when connecting the (-) probe of measuring instruments. Especially on an oscilloscope, avoid connecting the (-) probe for CH1 to the GND. b. In many cases, measuring instruments have the same potential as that for the (-) probe. Be sure to set the measuring instruments to the floating state. c. If you have mistakenly connected the REFO1 to the GND, turn off the regulator or the power immediately. 2) Test mode This mode is used to adjust the CD mechanism module. • To enter the test mode. While pressing the 4 and 6 keys at the same time, reset. • To exit from the test mode. Turn off the ACC and back up. Notes: a. During ejection, do not press any other keys than the EJECT key until the loaded disc is ejected. b. If you have pressed the (→) key or (←) key during focus search, turn off the power immediately to protect the actuator from damage caused by the lens stuck. • Before mounting and removing filters or leads for adjustment, be sure to turn off the regulator. B C • For stable circuit operation, keep the mechanism operating for about one minute or more after the regulator is turned on. • In the test mode, any software protections will not work. Avoid applying any mechanical or electrical shock to the mechanism during adjustment. • The RFI and RFO signals with a wide frequency range are easy to oscillate. When observing the signals, insert a resistor of 1k ohms in series. D • The load and eject operation is not guarantied with the mechanism upside down. If the mechanism is blocked due to mistaken eject operation, reset the product or turn off and on the ACC to restore it. E F 43 DEH-1500R/XU/EW 5 6 7 8 1 A 2 3 4 6.2 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT • Note : The grating angle of the PU unit cannot be adjusted after the PU unit is changed. The PU unit in the CD mechanism module is adjusted on the production line to match the CD mechanism module and is thus the best adjusted PU unit for the CD mechanism module. Changing the PU unit is thus best considered as a last resort. However, if the PU unit must be changed, the grating should be checked using the procedure below. • Purpose : To check that the grating is within an acceptable range when the PU unit is changed. B • Symptoms of Mal-adjustment : If the grating is off by a large amount symptoms such as being unable to close tracking, being unable to perform track search operations, or taking a long time for track searching. • Method : • Measuring Equipment • Measuring Points • Disc • Mode • • • • Oscilloscope, Two L.P.F. E, F, REFO1 ABEX TCD-782 TEST MODE CD CORE UNIT(S10) C L.P.F. E Xch 100kΩ F 100kΩ 390pF VREF L.P.F. F E REFO1 D Oscilloscope 390pF VREF Ych E • Checking Procedure 1. While pressing the 4 and 6 keys at the same time, reset. 2. The display will change, returning to "81" on the fourth press. 3. As shown in the diagram above, monitor the LPF outputs using the oscilloscope and check that the phase difference is within 75° . Refer to the photographs supplied to determine the phase angle. 4. If the phase difference is determined to be greater than 75° try changing the PU unit to see if there is any improvement. If, after trying this a number of times, the grating angle does not become less than 75° then the mechanism should be judged to be at fault. • Note Because of eccentricity in the disc and a slight misalignment of the clamping center the grating waveform may be seen to "wobble" ( the phase difference changes as the disc rotates). The angle specified above indicates the average angle. • Hint Reloading the disc changes the clamp position and may decrease the "wobble". F 44 DEH-1500R/XU/EW 1 2 3 4 5 Grating waveform 6 7 8 Ech → Xch 20mV/div, AC Fch → Ych 20mV/div, AC 0° A 30° B 45° 60° C D 75° 90° E F 45 DEH-1500R/XU/EW 5 6 7 8 1 A 2 3 4 6.3 ERROR MODE - Error Messages If a CD is not operative or stopped during operation due to an error, the error mode is turned on and cause(s) of the error is indicated with a corresponding number. This arrangement is intended at reducing nonsense calls from the users and also for facilitating trouble analysis and repair work in servicing. B (1) Basic Indication Method 1) When SERRORM is selected for the CSMOD (CD mode area for the system), error codes are written to DMIN (minutes display area) and DSEC (seconds display area). The same data is written to DMIN and DSEC. DTNO remains in blank as before. 2) Head unit display examples Depending on display capability of LCD used, display will vary as shown below. xx contains the error number. 8-digit display ERROR– xx C 6-digit display ERR– xx 4-digit display E– xx (2) Error Code List Displayed error code Description of the code and potential cause(s) Code Class Electricity Carriage Home NG CRG can't be moved to inner diameter. 10 CRG can't be moved from inner diameter. SERVO LSI Com→ Failure on home switch or CRG move mechanism. munication Error 11 Electricity Focus Servo NG Communication error between microcomputer and SERVO LSI. Focusing not available. → Stains on rear side of disc or excessive vibrations on REWRITABLE. 12 Electricity Spindle Lock NG Subcode NG Spindle not locked. Sub-code is strange (not readable). → Failure on spindle, stains or damages on disc, or excessive vibrations. A disc not containing CD-R data is found. D Turned over disc are found, though rarely. CD signal error. AGC protection doesn't work. Focus can be easily lost. → Damages or stains on disc, or excessive vibrations on REWRITABLE. 17 Electricity Setup NG 30 Electricity Search Time Out Failed to reach target address. → CRG tracking error or damages on disc. 44 Electricity ALL Skip 50 Mechanism CD On Mech Error Skip setting for all track. (CD-R/RW) Mechanical error during CD ON. → Defective loading motor, mechanical lock and mechanical sensor. A0 System E Power Supply NG Power (VD) is ground faulted. → Failure on SW transistor or power supply (failure on connector). Remarks: Mechanical errors are not displayed (because a CD is turned off in these errors). Unreadable TOC does not constitute an error. An intended operation continues in this case. Upper digits of an error code are subdivided as shown below: 1x: Setup relevant errors, 3x: Search relevant errors, Ax: Other errors. F 46 DEH-1500R/XU/EW 1 2 3 4 5 6 8 7 7. GENERAL INFORMATION 7.1 DIAGNOSIS 7.1.1 DISASSEMBLY A - Removing the Case (not shown) 1. Remove the Case. - Removing the CD Mechanism Module (Fig.1) 1 CD Mechanism Module Remove the four screws. B Disconnect the connector and then remove the CD Mechanism Module. 1 1 - Removing the Grille Assy (Fig.1) 2 Release the two latches and then remove the Grille Assy. C 1 1 2 2 Grille Assy Fig.1 - Removing the Tuner Amp Unit (Fig.2) D 1 Remove the screw. 2 Remove the three screws. 3 Straight the tabs at three locations indicated. 4 Remove the screw and then remove the Tuner Amp Unit. 2 2 2 4 1 E 3 3 3 Tuner Amp Unit F Fig.2 47 DEH-1500R/XU/EW 5 6 7 8 1 A 2 3 4 - How to assemble Keyboard Unit 1. Assemble them in order from "1" to "8". (See the figure below.) 2. After that, bend the crows (7 in total) until they get the right angles with the marks printed on "8". Note) If "5" is not set collectly, defective contact may occur on "6". To avoid this problem, hold "5" using "7" just before putting "8". 8 7 B 3 6 4 5 C 2 1 D E F 48 DEH-1500R/XU/EW 1 2 3 4 6 5 8 7 - How to hold the Mechanical Unit A 1. Hold the top and bottom frame. 2. Do not squeeze top frame's front portion too tight, because it is fragile. B Do not squeeze. - Removing the Upper and Lower Frames 1. With a disc clamped, remove the four springs (A), the two springs (B), the two springs (C), and the four screws. 2. To remove the upper frame, open it on the fulcrum A. 3. While lifting the carriage mechanism, remove the three dampers. 4. With the frames removed, insert the connectors coming from the main unit and eject the disc. Caution: Before installing the carriage mechanism in the frames, be sure to apply some alcohol to the dampers and set the mechanism to the clamp mode. Upper Frame A C A C A A Carriage Mechanism B Damper Lower Frame C A D Damper B Damper - Removing the Guide Arm Assy 1. Remove the upper and lower frames and set the mechanism to the clamp mode. 2. Remove the two springs. 3. Remove the two screws and bevel gear bracket. Note that the gears come off. 4. Slide the guide arm Assy in the direction marked with the arrow (1) and open it upwards. 5. At the angle of about 45 degrees, slide the guide Spring arm Assy in the direction marked with the arrow (3) to remove it. E 3 2 1 Guide Arm Assy Spring F 49 DEH-1500R/XU/EW 5 6 7 8 1 2 3 4 A Bevel Gear Bracket B - Removing the CD Core Unit(S10) C 1. Apply shorting solder to the Pickup flexible cable. Disconnect the cable. 2. Remove the solder from the four leads, and loosen the screw. 3. Remove the CD core unit(S10). Caution: When assembling the CD core unit(S10), set Shorting Solder the mechanism to the clamp mode to protect the switches from any damage. Solder CD Core Unit(S10) D - Removing the Roller Arm Assy E 1. Remove the guide arm Assy and set the mechanism to the eject mode. 2. Remove the CD core unit(S10). (You do not have to remove the solder from the four leads.) 3. Remove the spring and E-shaped ring from the fulcrum shaft. 4. Slide the roller arm Assy in the direction marked with an arrow. Roller Arm Assy E-Shaped Ring F 50 DEH-1500R/XU/EW 1 2 3 4 5 6 8 7 - Removing the Pickup Unit A Washer 1. Set the mechanism to the clamp mode. 2. Remove the lead wires from the inner holder. 3. Remove the two washers, styling holder, change arm, and pickup lock arm. 4. While releasing from the hook of the inner holder, lift the end of the feed screw. Caution: In assembling, move the planet gear to the load/eject position before setting the feed screw in the inner holder. Pickup Lock Arm Change Arm Styling Holder Feed Screw B Inner Holder C Planet Gear - Removing the Load Carriage Motor Assy 1. Release the leads from the styling holder and remove the holder. 2. Remove the two screws. 3. Remove the load carriage motor Assy. Styling Holder Load Carriage Motor Assy D E F 51 DEH-1500R/XU/EW 5 6 7 8 F ANTENNA PRE OUT D Pin No. 1 2 3 4 5 6 7 8 52 1 2 FR+ RR+ FRRRFL+ RL+ FLRL- Pin No. 9 10 11 12 13 14 15 16 1 3 5 7 9 11 13 15 2 4 6 8 10 12 14 16 B 10A MUTE B.REMOTE ACC GND B.UP 1 2 3 3 4 7.1.2 CONNECTOR FUNCTION DESCRIPTION A C E DEH-1500R/XU/EW 4 6 5 7 8 7.2 PARTS 7.2.1 IC A - Pin Functions (PE5329A,PE5330A) Pin Name Pin No. MODEL1 1 NC 2,3 AVSS 4 NC 5,6 AVREF1 7 KYDT 8 DPDT 9 adpw 10 TUNPDI 11 TUNPDO 12 TUNPCK 13 PCL 14 TESTIN 15 XSI 16 XSO 17 XSCK 18 NC 19,20 swvdd 21 ILMPW 22 NC 23 XRST 24 XA0 25 XSTB 26 CLAMSW 27 CONT 28 LOEJ 29 CLCONT 30 NC 31 DALMON 32 VSS1 33 TELIN 34 NC 35,36 ROMDATA 37 ROMCLK 38 ROMCS 39 RECIEVE 40 VDCONT 41 NC 42 SYSPW 43 NC 44 PEE 45 KEY2 46 NC 47 MUTE 48 ANTPW 49 NC 50 VST 51 VDT 52 VCK 53 NC 54 TUNPCE2 55 TUNPCE1 56 RDT 57 RDSLK 58 RDS57K 59 reset 60 LDET 61 I/O I O O I O O O I I O O O O O O O O O O O O O O O O O O O I O O O O O O O O I I I I Function and Operation Model port 1 Not used A/D GND Not used A/D converter reference voltage Key data input Display data output A/D converter power supply output PLL IC data input PLL IC data output PLL IC clock output Clock adjustment output Test program mode input Serial data input Serial data output Serial data clock output Not used Keyboard unit power supply control output Illumination power supply control output Not used CD LSI reset output CD LSI identification control signal output CD LSI strobe output Disc clamp switch output (CD) Servo driver power supply control output CD load motor LOAD/EJECT direction exchange output Driver input select output Not used Stand-by output GND Telephone mute output Not used ROM collection data output ROM collection clock output ROM collection chip select output During RDS data reception output VD control output Not used System power supply control output Not used Beep tone output Key data input (Remote control) Not used System mute output Antenna output Not used Strobe pulse output for electronic volume Data output for electronic volume Clock output for electronic volume Not used EEPROM chip enable output 2 EEPROM chip enable output 1 RDS demodulation data input RDS LK signal input RDS 57kHz pulse count input Reset input PLL lock sense input B C D E F 53 DEH-1500R/XU/EW 5 6 7 8 1 2 3 4 A Pin No. 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 B I/O I I I I I Pin Name RCK asens bsens DSENS INTRQ VSS0 VDD1 X2 X1 IC(VPP) NC XT1 VDD0 AVDD SL NC VDSENS DISCSENS STRKEY1 I I I *PE5329A,PE5330A IC's marked by * are MOS type. Be careful in handling them because they are very liable to be damaged by electrostatic induction. 61 80 C Function and Operation RDS demodulation clock input ACC sense input Back up sense input Grille detach sense input ATAPI HOST interrupt request input GND Power supply Crystal oscillator connection pin Crystal oscillator connection pin Connect to GND Not used Connect to GND Power supply Positive power supply terminal for analog circuit SD level input from tuner Not used VD power supply voltage sense input CD DISC sense input Key data (Remote control) 60 1 *S-80834CNY 20 40 41 21 D 1 2 3 OUT VDD VSS E F 54 DEH-1500R/XU/EW 1 2 3 4 6 5 7 8 - Pin Functions (PD6340A) Pin No. 1-5 6-9 10 11-14 15,16 17 18 19 20 21 22 23 24 25,26 27 28 29-32 33-55 56 57-64 Pin Name SEG4-0 COM3-0 VLCD KST3-0 KDT0,1 REM DPDT NC KYDT MODA X0 X1 VSS KDT2,3 NC KST4 NC SEG35-13 VDD SEG12-5 A I/O O O Function and Operation LCD segment output LCD common output LCD drive power supply Key strobe output Key data input (analogue input) Remote control reception input Display data input Not used Key data output GND Crystal oscillator connection pin Crystal oscillator connection pin GND Key data input Not used Key strobe output Not used LCD segment output Power supply LCD segment output O I I I O I O O O B C 48 33 *PD6340A 32 49 D 64 1 16 17 E F 55 DEH-1500R/XU/EW 5 6 7 8 1 2 3 4 - Pin Functions(UPD63712GC) A B C D E F Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 Pin Name LD PD PN AVDD DGND RFOK INTQ rst A0 stb sck SO SI DVDD DAVDD ROUT DAGND REGC DAGND LOUT DAVDD XVDD xtal XTAL XGND DVDD C1D1 C1D2 C2D1 C2D2 C2D3 LOCK MIRR HOLD PLCK C16M DGND TX EMPH FLAG DVDD LIMIT xtalen DGND DIN DOUT SCKIN SCKO LRCKIN LRCK DVDD FD+ FDTD+ TDSD+ SDMD+ MDDGND I/O O I I Function and Operation Output of LD Input of PD Assignment of pickup polarity Power supply for the analog system Ground for digital circuits Output of RFOK Interruption signals to the external microcomputer Input of reset Command/Parameter discrimination signal input Data strobe signal input Serial data clock input Serial data output Serial data input Power supply for digital circuits Power supply for DAC Output of audio for the right channel GND for DAC Connected to the capacitor for band gap GND for DAC Output of audio for the left channel Power supply for DAC Power supply for the crystal oscillator Connected to the crystal oscillator Connected to the crystal oscillator Ground for the crystal oscillator Power supply for digital circuits Information on error correction Information on error correction Information on error correction Information on error correction Information on error correction Output of LOCK MIRR signal HOLD signal Output of PLCK Output of 16.9344MHz Ground for digital circuits DAI output Pre-emphasis information output The flag for which output sound data cannot be corrected is outputted Power supply for digital circuits Signal is inputted when the register can be read Permission to oscillate Ground for digital circuits Input of audio data Output of audio data Clock input for audio data Clock output for audio data Input of LRCK for audio data Output LRCK for audio data Power supply for digital circuits Output of focus drive PWM Output of focus drive PWM Output of tracking drive PWM Output of tracking drive PWM Output of thread drive PWM Output of thread drive PWM Output of spindle drive PWM Output of spindle drive PWM Ground for digital circuits O O I I I I O I O O O I O O O O O O O O O O O O O I I I O I O I O O O O O O O O O 56 DEH-1500R/XU/EW 1 2 3 4 6 5 Pin No. 61 62-66 67 68 69 70 71 72, 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Pin Name TESTEN TEST4-0 ADGND EFM ASY ADVDD RFI EQ2, 1 RFRF2AGCO AGCI RFO ATEST C3T AGND A C B D F E VREFIN AVDD REFOUT REFC FEFEO ADCIN TETEO TE2 TEC AGND PWMSW I/O I I 7 8 Function and Operation Connected to GND Connected to GND GND for DAC Output of EFM signals Input of asymmetry Power supply for DAC Input of RF Equalizer 2, 1 Reversal input of RF Reversal input of RF2 Output of RF Input of AGC Output of RF Analog tests Connection to the capacitor for detecting 3T Ground for the analog system Input of A Input of C Input of B Input of D Input of F Input of E Photo-detector input bias voltage Power supply for the analog system Output of reference voltage Connected to the capacitor for output of REFOUT Reversal input of FE Output of FE TEST Reversal input of TE Output of TE TE2 TEC Ground for the analog system Servo PWM mode switching O I I I I O I O O I I I I I I I O I O I I O O I I A B C D 26 50 * UPD63712GC 25 51 E 75 76 100 1 F 57 DEH-1500R/XU/EW 5 6 7 8 1 A 2 3 4 - Pin Functions(BA5996FP) Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 B C Pin Name VR OPIN2(+) OPIN2(-) OPOUT2 OPIN1(+) OPIN1(-) OPOUT1 GND MUTE POWVCC1 VO1(-) VO1(+) VO2(-) VO2(+) VO3(+) VO3(-) VO4(+) VO4(-) POWVCC2 GND CNT LDIN OPOUTSL OPINLSL OPOUT3 OPIN3(-) OPIN3(+) PREVCC Function and Operation Input pin for reference voltage Input pin for non-inverting input for CH2 preamplifier Input pin for inverting input for CH2 preamplifier Output pin for CH2 preamplifier Input pin for non-inverting input for CH1 preamplifier Input pin for inverting input from CH1 preamplifier Output pin for CH1 preamplifier Ground pin Mute control pin Power supply pin for CH1, CH2, and CH3 at "Power" stage Driver CH1 - Negative output Driver CH2 - Positive output Driver CH2 - Negative output Driver CH2 - Positive output Driver CH2 - Positive output Driver CH2 - Negative output Driver CH4 - Positive output Driver CH4 - Negative output Power supply pin for CH4 at "Power" stage Ground pin Control pin Loading input Output pin for preamplifier for thread Input pin for preamplifier for thread CH3 preamplifier output pin Input pin for inverting input for CH3 preamplifier Input pin for non-inverting input for CH3 preamplifier PreVcc BA5996FP 14 1 15 28 D NJM2391DL1-33 E +- VREF Thermal Shutdown Over current protector 1 2 3 IN GND OUT F 58 DEH-1500R/XU/EW 1 2 3 4 6 5 8 7 EW model A - FM/AM Tuner Unit OSC AM ANT 1 RDS_HSLK RDS_DATA 18 19 20 21 RDS_LOCK DO 14 RDS_CK 11 LDET DI 5V CK SL IC 3 EEPROM 5.0V 10 9 8 CE1 5 ROM_VDD CE2 WC 13 IC 5 3.3V ← 7 6 LPF FMRF B ATT Rch IC 2 2.5V IC 1 3.3V FM ANT 3 ATT FMRF ANT adj 24 Lch MIXER, IF AMP RF adj T51 23 DET, FM MPX, RDS DECODER CF52 No. Symbol 1 AMANT 2 3 4 5 6 7 RFGND FMANT VCC SL CE2 WC AUDIOGND NC 15 22 16 I/O Explain I AM antenna input I O I I RF ground FM antenna input power supply signal level chip enable-2 write control 8 9 10 11 12 13 CE1 CK DI LDET OSCGND ROM_VDD I I I O chip enable-1 clock data in lock detector osc ground power supply 14 15 16 17 18 19 20 DO DGND NC VDD_3.3 RDS_CK RDS_DATA RDS_LOCK O data out digital ground non connection power supply RDS clock RDS data RDS lock 21 RDS_HSLK O O O O 22 AUDIOGND 23 L ch O 24 R ch O RDS high speed lock audio ground L channel output R channel output 4 VDD_3.3 DGND 12 VCC OSCGND 2 3.3V IC 4 3.3V 2.5V 2.5V ← RFGND CF51 C 17 AM antenna input high impedance AMANT pin is connected with an all antenna by way of 4.7µH. (LAU type inductor) A series circuit including an inductor and a resistor is connected with RF ground for the countermeasure against the ham of power transmission line. Ground of antenna block Input of FM antenna 75Ω Surge absorber(DSP-201M-S00B) is necessary. The power supply for analog block. D.C 8.4V ± 0.3V Output of FM/AM signals level Chip enable for EEPROM ” Low” active You can write EEPROM, when EEPROM write control is “ Low” . Ordinary non connection Chip enable for AF•RF ” High” active Clock Data input “ Low” active Ground of oscillator block Power supply for EEPROM pin 13 is connected with a power supply of micro computer. Data output Ground of digital block Not used The power supply for digital block. 3.3V ± 0.2V Output of RDS clock(2.5V) Output of RDS data(2.5V) Output unit “ High” active(2.5V) (RDS_LOCK turns over by the external transistor. “ Low” active) Output unit “ High” active(2.5V)(RDS_HSLK turns over by the external transistor. “ Low” active) Ground of audio block FM stereo “ L-ch” signal output or AM audio output FM stereo “ R-ch” signal output or AM audio output 59 DEH-1500R/XU/EW 5 6 7 8 D E F 1 A 2 3 4 EE model - FM/AM Tuner Unit 5V OSC AM ANT B 1 NC NC NC 18 19 20 21 NC 14 DO NC 11 CE1 DI SL IC 3 EEPROM 5.0V 10 9 8 CK 5 ROM_VDD CE2 WC 13 IC 5 3.3V ← 7 6 LPF FMRF ATT Rch 3 IC 1 3.3V FM ANT ATT FMRF ANT adj 24 IC 2 2.5V Lch MIXER, IF AMP 23 DET, FM MPX RF adj T51 CF52 No. Symbol 1 AMANT 2 3 4 5 6 7 D E RFGND FMANT VCC SL CE2 WC NC 15 22 16 I/O Explain I AM antenna input I O I I 8 9 10 11 12 13 CE1 CK DI NC OSCGND ROM_VDD I I I 14 15 16 17 18 19 20 21 22 23 24 DO O DGND NC VDD_3.3 NC NC NC NC AUDIOGND L ch O R ch O RF ground FM antenna input power supply signal level chip enable-2 write control chip enable-1 clock data in non connection osc ground power supply data out digital ground non connection power supply non connection non connection non connection non connection audio ground L channel output R channel output 4 VDD_3.3 AUDIOGND 12 VCC DGND RFGND 2 3.3V IC 4 3.3V 2.5V 2.5V ← C OSCGND CF51 17 AM antenna input high impedance AMANT pin is connected with an all antenna by way of 4.7µH. (LAU type inductor) A series circuit including an inductor and a resistor is connected with RF ground for the countermeasure against the ham of power transmission line. Ground of antenna block Input of FM antenna 75Ω Surge absorber(DSP-201M-S00B) is necessary. The power supply for analog block. D.C 8.4V ± 0.3V Output of FM/AM signals level Chip enable for EEPROM ” Low” active You can write EEPROM, when EEPROM write control is “ Low” . Ordinary non connection Chip enable for AF•RF ” High” active Clock Data input Not used Ground of oscillator block Power supply for EEPROM pin 13 is connected with a power supply of micro computer. Data output Ground of digital block Not used The power supply for digital block. 3.3V ± 0.2V Not used Not used Not used Not used Ground of audio block FM stereo “ L-ch” signal output or AM audio output FM stereo “ R-ch” signal output or AM audio output F 60 DEH-1500R/XU/EW 1 2 3 4 5 6 7 8 DEH-1500R/XU/EW 61 COMMON SEGMENT F 39 38 37 36 COM0 COM0 COM1 COM1 COM2 COM2 COM3 COM3 E 35 34 33 32 31 30 29 28 27 26 25 D 24 23 22 21 20 19 18 17 16 15 C 14 13 12 11 10 9 8 7 6 5 4 B 3 2 1 0 A - LCD(CAW1731)(EW model) 7.2.2 DISPLAY 5 7 6 8 1 2 3 4 DEH-1500R/XU/EW 62 COMMON SEGMENT F 39 38 37 36 COM3 COM3 COM2 COM2 COM1 COM1 COM0 COM0 E 35 34 33 32 31 30 29 28 27 D 26 25 24 23 22 21 20 19 18 17 C 16 15 14 13 12 11 10 9 8 7 B 6 5 4 3 2 1 0 A - LCD(CAW1735)(EE model) 2 1 3 4 6 5 7 8 7.3 OPERATIONAL FLOW CHART A Power ON VDD1=5V Pin 68 B bsens Pin 64 bsens=L asens Pin 63 asens=L C DSENS Pin 65 DSENS=L ADPW←H Pin 10 Starts communication with Grille microcomputer. D 300ms swvdd←L Pin 21 Source keys operative 300ms In case of the above signal, the communication with Grille microcomputer may fail. If the time interval is not 300msec, the oscillator may be defective. E Source ON SYSPW←H Pin 43 F Completes power-on operation.(After that, proceed to each source operation.) 63 DEH-1500R/XU/EW 5 6 7 8 1 A 2 3 4 3 4 7.4 CLEANING Before shipping out the product, be sure to clean the following portions by using the prescribed cleaning tools: Portions to be cleaned CD pickup lenses Cleaning tools Cleaning liquid : GEM1004 Cleaning paper : GED-008 B C D E F 64 DEH-1500R/XU/EW 1 2 5 6 7 8 8. OPERATIONS A - EW model B C D E F 65 DEH-1500R/XU/EW 5 6 7 8 1 A 2 3 4 3 4 - EE model B C D E F 66 DEH-1500R/XU/EW 1 2 5 6 7 8 A B C D E F 67 DEH-1500R/XU/EW 5 6 7 8 1 2 1 2 3 4 3 4 . A B C D E F 68 DEH-1500R/XU/EW CBA1488 CBA1488 About the fixing screws for the front panel. 5 5 6 6 7 7 8 A B C D E F DEH-1500R/XU/EW 8 69 E 1 2* 4* 5* F 70 2 12. Red (4*) To electric terminal controlled by ignition switch (12 V DC) ON/OFF. 11. Red (5*) Accessory (or back-up) 3 D 15. Yellow/black If you use a cellular telephone, connect it via the Audio Mute lead on the cellular telephone. If not, keep the Audio Mute lead free of any connections. 16. Speaker leads White : Front left + Green : Rear left + White/black : Front left ≠ Green/black : Rear left ≠ Gray : Front right + Violet : Rear right + Gray/black : Front right ≠ Violet/black : Rear right ≠ 26. Rear Speaker 24. Left 27. Perform these connections when using the optional amplifier. 26. Rear Speaker 25. Right 20. System remote control 23. The pin position of the ISO connector will differ depends on the type of vehicle. Connect 6* and 7* when Pin 5 is an antenna control type. In another type of vehicle, never connect 6* and 7*. 22. Blue/white (6*) 21. Blue/white (7*) To Auto-antenna relay control terminal (max. 300 mA 12 V DC). 19. Blue/white To system control terminal of the power amp (max. 300 mA 12 V DC). 3 14. ISO connector Note: In some vehicles, the ISO connector may be divided into two. In this case, be sure to connect to both connectors. 4. Fuse 5. Jack for the Wired Remote Control Please see the Instruction Manual for the Wired Remote Control (sold separately). 18. Power amp (sold separately) 2 13. Black (ground) To vehicle (metal) body. 10. Yellow (2*) To terminal always supplied with power regardless of ignition switch position. 9. Yellow (3*) Back-up (or accessory) 7. Connect leads of the same color to each other. 3. Antenna jack 1. Rear output 2. This Product C 3* 1* Note: Depending on the kind of vehicle, the function of 3* and 5* may be different. In this case, be sure to connect 2* to 5* and 4* to 3*. A 8. Cap (1*) When not using this terminal, do not remove the cap. 6. B 17. Connecting cords with RCA pin plugs (sold separately) 1 4 - EW model DEH-1500R/XU/EW 4 5 6 7 8 - EE model A B C D E F 71 DEH-1500R/XU/EW 5 6 7 8