Download Philips SDV9492/27 Data Sheet
Transcript
Philips Antenna mount Roof/attic SDV9492 Mount outdoor antenna to roof or attic Securely mount your antenna indoors or out. Accepts antenna mast up to 1.5" diameter. Includes all hardware • Base • Saddle bracket and U bolt • Wood screws, lock washers and hex-nuts SDV9492/27 Antenna mount Roof/attic Specifications Packaging dimensions • Packaging dimensions (W x H x D): 12 x 4.5 x 19.6 cm • Gross weight: 0.27 kg • Nett weight: 0.02 kg • Tare weight: 0.25 kg • Packaging dimensions (W x H x D): 4.7 x 1.8 x 7.7 inch • Gross weight: 0.595 lb • Nett weight: 0.044 lb • Number of products included: 1 • Packaging type: Blister • Tare weight: 0.551 lb • UPC: 6 09585 16095 8 Inner Carton • Gross weight: 1.097 kg • Gross weight: 2.418 lb • GTIN: 1 06 09585 16095 5 Highlights • • • • • • • Inner carton (L x W x H): 7.9 x 3.9 x 4.3 inch Inner carton (L x W x H): 20 x 10 x 11 cm Nett weight: 0.08 kg Nett weight: 0.176 lb Number of consumer packagings: 4 Tare weight: 1.017 kg Tare weight: 2.242 lb Outer Carton • • • • • • • • • • Gross weight: 6.66 kg Outer carton (L x W x H): 31.5 x 20.5 x 23 cm Nett weight: 0.48 kg Tare weight: 6.18 kg Gross weight: 14.683 lb GTIN: 2 06 09585 16095 2 Outer carton (L x W x H): 12.4 x 8.1 x 9.1 inch Nett weight: 1.058 lb Number of consumer packagings: 24 Tare weight: 13.624 lb • Issue date 2010-01-30 © 2010 Koninklijke Philips Electronics N.V. All Rights reserved. Version: 1.1.5 Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. 12 NC: 8670 000 42646 UPC: 6 09585 16095 8 www.philips.com Base The base bolts to the roof or attic to keep the antenna mast in place. Saddle bracket and U bolt Two pieces of hardware screw into the base bracket to secure the antenna.