Download Philips HTS3000/51 User's Manual
Transcript
3 HTS3000 DVD HOME THEATRE SYSTEM Enjoy Start disc playback Listen to radio A Press OPEN/CLOSE ç to open the disc tray. A Press RADIO. Quick Start Guide The display panel shows ‘AUTO INSTALL PRESS PLAY’. B Press u. All the available radio stations with strong reception signal will be stored automatically. C Once complete, use í / ë keys to select a preset B C D E radio station. Place a disc with the disc label facing up. 1 2 3 Press OPEN/CLOSE ç to close the disc tray. Playback starts automatically. If the disc menu appears on the TV, use keys or numeric keypad to select an option in the menu and press OK to start playback. z To enjoy the powerful surround sound from the speakers, press SURROUND on the remote control to turn on the multi-channel surround mode. Connect Set up Enjoy F Press to stop playback. Note When you press u button, playback resumes from where it last stopped. To start playback from the beginning, you have to press . What’s in the box? Troubleshooting For more troubleshooting tips, see the user manual. No picture. • • Main Unit Press DISC on the remote control. Check the connection to the TV and ensure the plugs are firmly in place. Remote Control and 2 batteries Composite video cable No sound. • • • Check the speaker connections and settings. Check the audio connections and press SOURCE to select the correct input source. Press SURROUND to turn on the multi-channel surround output. User Manual The main unit does not work. • Disconnect the power cord from the power outlet for a few minutes. Reconnect the power cord and try again. 1 centre, 2 front, 2 rear speakers and subwoofer Need help? User Manual See the user manual that came with your Philips DVD Home Theatre System. Online Go to www.philips.com/welcome 2007 C Koninklijke Philips N.V. All rights reserved. www.philips.com FM wire antenna AM/MW loop antenna Power cable 1 A Connect 2 Placement C Proper speakers system placement is important to ensure optimum sound performance. FRON T LEFT REAR LEFT D Connect the speakers and subwoofer Connect the various coloured plugs from the speakers and subwoofer to the same coloured sockets at the rear of the main unit. A Connect the radio antennas and power cable Set up Finding the viewing channel A Press 2 (STANDBY ON) on the main unit to turn Keep the antennas away from the electronic devices to prevent unwanted interference. it on. B Turn on the TV. Use the TVs remote control to select the correct viewing channel. AM/MW antenna STANDBY-ON CEN TER SUBWOOFER FRON T RIGHT SPEAKERS SUB REAR RIGHT B FRONT CENTRE WOO AM/ MW Main Unit (rear) FER A Place the centre speaker above or close to the TV. B Place the subwoofer on the floor, at least one metre FRONT RIGHT FRONT LEFT REAR RIGHT A C REAR LEFT Note To search for the correct viewing channel, press the Channel Down button on the TVs remote control repeatedly (or AV, SELECT, ° button) until you see the Video In channel. FM antenna away from the TV. C Place the front speakers at equal distances from the A Connect the FM antenna to the inner pin of the TV. D Place the rear speakers at normal listening ear level. B Unfold the AM/MW loop antenna and fix the claw B B FM 75 socket. Extend the wire for optimum reception. A Press SETUP. The { General Setup Page } appears. into the slot. Push the tabs and insert the wires into the AM/MW sockets. Connect the main unit to TV Select the display language on the screen C Connect in the power cable from the main unit to General Setup Page the AC power outlet. Disc Lock Display Dim Program OSD Language Screen Saver Sleep DivX(R) VOD Code VIDEO IN (CVBS) Television (rear) Main Unit (rear) SPEAKERS AM/ MW E Connect audio output from TV (optional) SPEAKERS AM/ MW AUDIO OUT Main Unit (rear) VIDEO OUT Pr Television (rear) AUDIO OUT AUDIO OUT AUDIO IN z Connect a composite video cable (supplied) from the SPEAKERS B Press C Use to select { OSD Language } and press . keys to select a language option in the menu and press OK to confirm. D Press SETUP to exit. Note The language set here is only for the menus that are shown on the TV while operating this Home Theatre system, not for the DVD disc menu. Y CVBS socket on the main unit to the VIDEO IN socket on your TV. Melayu Русский ไทย SETUP To hear the TV audio through this home theatre system, use a red and white audio cables (not supplied) to connect the AUDIO IN-TV sockets on the main unit to the AUDIO OUT sockets on your TV. VIDEO IN (CVBS) English AM/ MW Main Unit (rear) Note It is important to connect the main unit directly to your TV. Note Press TV on the remote control to get the sound output from the speakers system when watching the TV programmes. There are various setup options (Audio Setup, Video Setup, Preference Setup) available on this Home Theatre System. Refer to the user manual for more information.