Transcript
Specifications DESCRIPTION • Metal construction with, a chrome plated, chrome with porcelain, LifeShine® polished brass, LifeShine® brushed nickel, black opal, classic gold, platinum, satine or glacier finish • Pressure balancing cycle valve design with an adjustable temperature limit stop • 1/2" CC connections OPERATION • Handle operates counterclockwise through a 270˚ arc with off at 6 o’clock and maximum hot at the 9 o’clock position. Shut off in clockwise direction • Adjustable temperature limit stop to control maximum hot water temperature • Pressure balancing mechanism maintains selected discharge temperature to ± 2° CARTRIDGE • 1222 cartridge design • Nonmetallic/nonferrous and stainless steel materials • Accommodates back to back installations STANDARDS • Third party certified to meet CSA B-125, ASME A112.18.1M, ANSI A117.1 and all applicable requirements referenced therein WARRANTY • Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser • 5 year warranty if used in commercial installations 2" CC (51mm) 1 7/8" IPS (48mm) MAX WALL ADA MONTICELLO® POSI-TEMP® Single Handle Tub/Shower (Trim Only) Models: T2343, T2343P (Bulk Packed 12 per carton) T2442, T2442BN, T2442CP, T2442CPC, T2442P, T2442ST, T2442PM (Packed 1 per carton) FACE OF STUD 1/2" MIN. CC (13mm) 5/8" MIN. IPS (16mm) FINISHED WALL LINE 7" (178mm) ESCUTCHEON DIAMETER 2-1/2" MAX. (63mm) DIAMETER WALL OPENING ESCUTCHEON 5-1/2" (140mm) WALL OPENING 7-1/2" (191mm) MIN. 1 3/8" (35mm) COLD INLET PLASTER GROUND 1-1/2" (38mm) CL CL LEVER HANDLE (Handle inserts not furnished) HOT INLET 3/16"(typ) (5mm) 3-1/2" (89mm) MAX. 2-1/4" (57mm) MIN. 3-1/4" (83mm) MIN. WALL CAVITY 1 3/8" (35mm) PLASTIC TUB/SHOWER SURROUND 32" (813mm) NOMINAL FLOOR FLOOR LINE CRITICAL DIMENSIONS (DO NOT SCALE) Rev. 2/05 FOR MORE INFORMATION CALL: 1-800-BUY-MOEN www.moen.com