Download Miele DA 249 Specification Sheet

Product Dimensions
Decorator Wall Hood
DA249-4
E
O
16"
11 1/
11 1/
4"
12 1/2"
Front Perspective
20 9/16" - 30 7/16"
See Notes
8 1/2
"
16"
35 7/
19 11
/16"
Location Codes
E - 110 Volt - 15 Amp 3-wire power
supply connects through top or rear
of chimney.
O - Standard 110 Volt Outlet
Notes
• All installations must be done in
accordance with local codes.
• Recirculation: 25 5/16" - 34 3/8"
• 6" duct connects to blower system inside
chimney.
NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 010405
Installation Dimensions
Decorator Wall Hoods
DA249-4
Ceiling Line
13 3/8"
Structural member
S + 9 7/8"
Area must be reinforced
with a minimum of
1/2" plywood backing
Center Line
Notes
• Center unit over cooking surface
• Distance "S" is determined by the cooking
surface. Minimum distance "S" is:
- 18" for electric surfaces
- 26" for gas surfaces
• Area behind mounting plates MUST be
reinforced using a minimum of 1/2"
plywood. Reinforcing material should be
affixed to structural wall members
NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 010405