Download Luma Comfort Fan MF24B User's Manual

Owner’s Manual
MF24B 24” Commercial Misting Fan
IMPORTANT SAFETY INFORMATION: Please carefully read this manual
before attempting to install or use this misting fan. For your safety, comply
with all safety instructions and warnings contained in this owner’s manual
to prevent personal injury or property damage.
To view the full line of Luma Comfort products, please visit
www.lumacomfort.com.
Contents
Introduction ..................................................................................................................... 1
Product Benefits .............................................................................................................. 1
Important Safety Information ........................................................................................... 1
Assembly Instructions ..................................................................................................... 2
Step 1: Assembling the Stand Pole .......................................................................... 2
Step 2: Connecting the Back Panel.......................................................................... 3
Step 3: Connecting the Water Line .......................................................................... 4
Step 4: Connecting the Fan Head to the Stand Pole................................................ 5
Step 5: Assembling the Water Tank ......................................................................... 6
Operating Instructions ..................................................................................................... 7
Maintenance .................................................................................................................... 7
Technical Support ........................................................................................................... 8
Product Specifications ..................................................................................................... 8
Warranty.......................................................................................................................... 9
Introduction
Thank you for purchasing this misting fan from Luma Comfort, the world leader in home appliances and
home comfort products.
This owner’s manual provides specific operating instructions for your misting fan. Use the misting fan
only as instructed in this owner’s manual.
Product Benefits








Designed for cooling large areas such as patios, factories, manufacturing facilities, garages,
athletic fields, greenhouses and more
Centrifugal misting system means there’s no clogged nozzles and no need to use filtered water
Constructed of heavy-gauge, anticorrosive metal for safety and durability
Quiet, high-efficiency fan motor
Adjustable misting flow with a fully-insulated seal around the water pump
Oscillating fan head covers a wider area
Adds moisture to dry environments and eliminates airborne dust particles
Covers up to 800 square feet and features a 4-hour maximum run time with each full tank
Important Safety Information
These instructions are not meant to cover every possible condition and situation that may occur. Please
read all instructions before using this misting fan. Failure to carefully read all instructions may result in
possible electric shock or fire hazard, and will void the manufacturer’s warranty.
1. Use this misting fan only as instructed in this owner’s manual. Other uses may cause electric
shock, injury or fire.
2. Close supervision is required if this fan is used near children or pets.
3. To protect against electric shock, do not immerse this fan or its plug and cord in water.
4. If the fan is being transported or will not be in use, disconnect it from the power supply by tightly
gripping the fan’s plug and pulling it from the power outlet. Do not disconnect the power supply
by pulling on the fan’s power cord.
5. Avoid contact with any of the misting fan’s moving parts.
6. Place the misting fan on a level surface.
7. This misting fan is intended to fit into a matching receptacle. Under no circumstances should the
grounded plug be altered in any way. An improper connection can result in electric shock.
8. If possible, avoid using extension cords with this misting fan. If an extension cord is absolutely
necessary, do not use more than one extension cord to operate more than one fan.
9. Do not insert objects or allow fingers to enter into the fan head, as this may cause electric shock
or bodily injury. Do not block or tamper with the misting fan while it is in operation.
10. Do not place the fan near curtains, drapes, or any other materials that can get caught in the
misting fan’s grills.
11. Do not run the power cord under mats or carpeting, and do not cover the power cord with
runners. Arrange the power cord away from room traffic and where it can be tripped over.
12. Do not operate this misting fan in the presence of flammable substances or explosives.
13. Do not place the fan near an open flame or cooking/heating appliances.
14. If the fan will not be in use, empty the tank of any remaining water.
15. If the fan’s plug or power cord is damaged, do not attempt to repair the components yourself.
Please contact Luma Comfort’s customer service hotline at 1-866-737-6390 or have the fan
examined by an authorized service provider.
SAVE THESE INSTRUCTIONS
1
Assembly Instructions
DO NOT plug in the fan before assembly. This misting fan comes in 2 separate boxes. Carefully remove
all packaging materials and retain for future storage/use. Make sure there is no residual foam left in any
of the components. A screwdriver and wrench will be required to assemble this misting fan.
Step 1: Assembling the Stand Pole
a. Refer to diagram 1 below. Remove the following parts from the fan’s base and set them aside:
four (4) M6x16 screws, large washers, small washers and nuts.
b. Place the stand pole on the fan base, align the screw holes and secure the pole in place using
the screws, washers and nuts. Make sure the hole located near the bottom of the stand pole is
facing the square shaped pump slot.
2
Step 2: Connecting the Back Panel
a. Refer to diagram 2. Find the rectangular panel located on the back of the stand pole. Remove
this back panel from the stand pole by completely unscrewing it from the stand pole. Set it aside.
b. Locate the water pump. This is packaged separately from the stand pole and can be found in box
#1. You will see 2 water hoses (1 large and 1 small) and 1 electric wire connected to the water
pump. Thread the hoses and wire into hole A (smaller, circular hole) and up the stand pole
through hole B (larger, elliptical shaped hole).
c. Locate the back panel removed in step 1 and orient it so that the label with the fan speeds is
located on top of the dial.
d. Take the small water hose from hole B and locate the connector that is attached to the back
panel. Connect the small water hose to the lower valve opening on the connector.
3
Step 3: Connecting the Water Line
a. Refer to diagram 3. Locate the metal pipe and fan head and attach the fan head onto the pipe.
The fan head should have 2 water hoses (1 large and 1 small) and 1 electric wire with male
connector plug connected to it.
b. Take the electric wire with the male connector that is located on the back of the fan head and
thread it through hole D.
c. Take the large water hose with 2 smaller water hoses within it and thread the entire piece through
hole C. You should now have the water hoses and electric wire coming out the end of the metal
pipe.
4
Step 4: Connecting the Fan Head to the Stand Pole
a. Refer to diagram 4. Place the stand pole/base on a level surface.
b. Take the water hoses and electric wire from the fan head/pipe and thread them through the top of
the stand pole. Do not attach the fan head to the stand pole yet.
c. Connect the male and female connector plugs together.
d. Take the small water hose from the fan head/metal pipe and connect it to the other valve opening
attached to the back panel.
e. Locate the large water hose from the fan head/metal pipe and connect it to the large connector
with the quick release valve.
f. Attach the fan head/metal pipe onto the stand pole and thread all hoses and wires into the stand
pole through hole B (elliptical shaped hole on the stand pole). Make sure none of the hoses or
wires are bent.
g. Reattach the screws onto the back panel.
h. Tighten the bolts located on the sleeve by the back panel to secure the stand pole and fan
head/pipe together.
5
Step 5: Assembling the Water Tank
a. Refer to diagram 5. Take the water pump and place it in the pump slot.
b. Locate the water tank and place it on the fan base, making sure to line up the pump opening with
the pump slot so that they fit together. Place any protruding hoses or wires into the tank.
c. Put the tank cover over the tank.
6
Operating Instructions
1.
2.
3.
4.
5.
6.
This misting fan can operate with optimal output in temperatures up to 104°F.
Lift up the tank cover and fill the tank with clean water.
Connect the fan to a power supply.
Turn on the fan by pressing the red power switch.
This misting fan has 3 different fan speeds. Turn the speed dial to adjust the fan speed.
To start the misting function, press the misting button located on the stand pole. The misting
function will only work if the fan speed is set. The pump and misting plate should power on at this
time.
7. To adjust the misting volume, turn the misting switch dial located near the top of the fan head.
8. To turn on the oscillation function, press the oscillation switch located on the back of the fan
motor.
9. The maximum run time for a full tank on high speed is approximately 4 hours.
Maintenance
Regular cleaning and maintenance is an essential step in maintaining the longevity of your misting fan
and ensuring that it operates free of defects. Maintain your misting fan by following these steps:






Always unplug the misting fan from the power supply before servicing or cleaning.
Use a soft cloth and a mild soap and warm water solution to clean the fan’s exterior. Do not use
harsh cleaners, gasoline, paint thinner, benzene, etc., as these substances can damage the
misting fan.
Thoroughly dry all of the fan’s parts with a soft cloth before reconnecting the unit to the power
supply.
Drain the water tank after the misting fan has been in use. Regular, scheduled cleaning of the
water tank and misting plate before each use is also recommended.
To clean the water tank, open the tank cover, remove the pump and then remove the tank from
the base. Always remember to remove the pump before cleaning the water tank.
If the misting fan will not be in use for an extended period of time, cover the unit and keep it
stored in a clean, dry place.
7
Technical Support
Luma Comfort is committed to providing a premier service experience. If you are experiencing any
technical issues with your product related to either setup or operation, please contact our product support
team at 1-866-737-6390 or [email protected].
Product Specifications
Model:
Product Dimensions:
Product Weight:
Voltage:
Wattage:
Fan Head Size:
Coverage Area:
Maximum Run Time:
Tank Size:
Fan Speeds:
RPMs:
Noise Levels (dB):
Temperature Drop:
Oscillation:
Warranty:
MF24B
17” (D) x 24” (W) x 65” (H)
50 pounds
110V-120V
280W
24”
Up to 800 square feet
4 hours on high speed
1.76 gallons
3
1200/1300/1500
62/67/70
30 – 45° F
90°
1 year manufacturer’s warranty
8
Warranty
Luma Comfort products are warranted to be free from defects in workmanship or materials for one (1)
year from the date of purchase. If the product is found to be defective within this period, Luma Comfort,
at its sole option, will repair or replace any components that fail during normal operation. The repairs or
replacement will be made at no charge to the customer for parts and labor, assuming that the customer
shall be responsible for all transportation costs to and from Luma Comfort.
Luma Comfort retains the right to repair or replace (with a new or newly-refurbished replacement product)
the appliance at its sole discretion.
This warranty does NOT apply to the following:
 Products without a proof of purchase
 Products purchased from a source other than an authorized Luma Comfort dealer
 Cosmetic damage such as scratches or dents
 Damage caused by service performed by anyone who is not an authorized service provider of
Luma Comfort
 Damage in transit
 Damage caused by accident, abuse, misuse, water, flood, fire, improper installation, maintenance
negligence, commercial use for a non-commercial unit, acts of God or any other acts of nature or
external causes
 Damage to a product caused by modifications or alterations without the written permission of
Luma Comfort
 Normal wear and tear of parts that are designed to be replaced, such as filters or batteries
 Power failure and improper power supply such as low voltage, defective wiring or inadequate
fuses
 Use of force or damage caused by external influences
 Complete or partially dismantled appliances
THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL
OTHER WARRANTIES EXPRESS, IMPLIED, OR STATUTORY, INCLUDING ANY LIABILITY ARISING
UNDER ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
STATUTORY OR OTHERWISE. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, WHICH
MAY VARY FROM STATE TO STATE.
IN NO EVENT SHALL LUMA COMFORT BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR
CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE USE, MISUSE, OR INABILITY TO
USE THIS PRODUCT OR FROM DEFECTS IN THE PRODUCT. SOME STATES DO NOT ALLOW THE
EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY
NOT APPLY TO YOU.
If you believe your product is defective, contact Luma Comfort for warranty service at 1-866-737-6390 or
[email protected]. In your correspondence with Luma Comfort, please describe the problem
and request a return material authorization (RMA) number. You will also need to provide the proof of
purchase, return shipping address and a daytime phone number.
After a Luma Comfort representative confirms that your product is defective and is still under warranty,
you will receive an RMA and return shipping instructions. Products sent to our headquarters without an
RMA will be refused.
9