Download Lightolier Power-Connect La Cable User's Manual
Transcript
POWER-CONNECT™ Page 1 of 2 LA CABLE LIGHTING ADAPTERS FEATURES • For feeding downlights or exit signs. • Male (power-in) and female (power-out) configuration. • Adapter is 2 13/16" x 2 13/16" x 13/16" installed. • Die cast housing with zinc plated steel cover plate. • Fixture adapters can be wired for single or multi-level use. • Thru wired for three circuits. • Type 6M adapter wires are #18 AWG TFN solid copper conductors, 600 volt. • Type 7M adapter wires are #12 AWG THHN stranded copper conductors, 600 volt. • Type 6M and 7M have 6 inch tap leads. • 1/2" K.O. connector for mounting to fixture. APPLICATION DIMENSIONS 3/4" 2-5/16" LA The fixture adapter is the link between the wiring distribution and the fixture ballast(s). It mounts directly to the fixture body in a standard 1/2" K.O. (7/8" diameter). The adapter can be rotated for ease of cable orientation to prevent a strain on the connection. Job Information Type: Job Name: Cat. No.: Lamp(s): Volts/Ballast: Lightolier a Genlyte Thomas Company www.lightolier.com Technical Information: (978) 657-7600 • Fax (978) 658-0595 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. © 2002 Genlyte Thomas Group LLC (Lightolier Division) A0902 OPTIONS/ACCESSORIES/Folio OA40-17 POWER-CONNECT™ Page 2 of 2 LA CABLE LIGHTING ADAPTERS WIRING DIAGRAM “B” PHASE TAP “A” PHASE TAP “C” PHASE TAP TWO CIRCUIT ORDERING INFORMATION Explanation of Catalog Number. Example: LP–LA–12–6–3 LP LOL POWER CONNECT – LA TYPE: LA =Lighting Adapter – – VOLTAGE: 12 - 120v 27 - 277v – WIRING CONFIGURATION: LENGTH: 6=#18 Tap Wires 3=3 inches, 7=#12 Tap Wires standard length M=Multi-level of flex A=“A” Phase Tap XX=Other length B=“B” Phase Tap of flex C=“C” Phase Tap SPECIFICATIONS • • • • • • Fixture adapter can be wired for single or multi-level use. 1/2" K.O. connector for mounting to fixture. Adapter is 2 13/16" x 2 13/16" x 13/16" installed. Die-cast housing with zinc plated steel cover plate. Thru-wired for three circuits. Type 6M adapter wires are #18 AWG TFN solid copper connectors, 600 volt. • Type 7M adapter wires are #12 AWG THHN stranded copper conductors, 600 volt. • Type 6M and 7M have 6 inch tap leads. Job Information Type: Lightolier a Genlyte Thomas Company www.lightolier.com Technical Information: (978) 657-7600 • Fax (978) 658-0595 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. © 2002 Genlyte Thomas Group LLC (Lightolier Division) A0902 OPTIONS/ACCESSORIES/Folio OA40-17