Download Life Fitness SL75 User's Manual
Transcript
SELECTORIZED STRENGTH TRAINING EQUIPMENT SL75 Glute Placard SL75-PL000-0001 Pulley (2) 0017-00009-0977 Guide Rods 0017-00009-0933 Note: Get length from Customer Label (2) 0K50-01001-0000 Cable AK50-CL085-0001 Bolt 0017-00101-1392 Nut 0017-00101-0228 End Cap 0017-00042-0959 Black Cap(8) 0017-00042-0969 Pillow Block(2) 0017-00006-0203 Rubber Cap 0017-00042-0952 Warning Label M051-00260-A000 Black Pad Set SL75-FEA02-0P01 (See additional pads, covers below) Shield Trim (26”) 0017-00042-0989 Weight Stack Shield SK50-S0047-0000 Rubber Stop Pad 0017-00042-1006 Rubber Grip 0017-00042-0995 Grip Cap (2) 0K50-P0315-2000 Grip Ring (2) 0K50-P0316-2000 Set Screw 0017-00101-1406 Rubber Pad Cap 0017-00042-0955 Kicker Pad 0K50-US008-0000 Pull Pin Kit SK50-S0001-0000 Small Black Cap (8) 0017-00104-0368 Selector Pin 0K50-A1102-0000 Lanyard Cord 0017-00009-0938 Plastic Insert 0017-00042-0998 Weight Stack (190 lbs) AK50-WS001-0000 (Seat Post Assembly S/N 64955-Above See Next Page) Weight Stickers M051-00261-A000 (10-190 lbs) M051-00264-A000 (5-95 KG) Foot Pad 5-3x4 0017-00042-1019 Weight Donut (2) 0017-00042-0993 End Cap 0017-00042-0947 Add-On Weight 5 lbs 0K50-P0312-0000 1 Rubber Cap 0017-00042-0936 Elbow Pad, Left 0K50-US051-0000 Elbow Pad, Right 0K50-US077-0000 Chest Pad 0K50-US039-0000 Knee Pad 0K50-US045-0000 Wear Cover 0K50-UE006-0000 SELECTORIZED STRENGTH TRAINING EQUIPMENT SL75 Seat Post Assembly - S/N 64955-Above 1 3 4 12 2 2-3/16” 13 10 6 11 NOTE: The Seat Guide is welded to the frame. Shown separately for illustration purposes only. 7 8 9 Item No. 1 2 3 4 6 Qty. 1 1 1 4 1 The 13 notch front/back striker plate is grey. The 14 notch front/back striker plate is black and was implemented first quarter 2001. Notched striker plate to be installed on seat post such that it is on the same side as the lever handle. Part Number AK50-S0028-0000 0K50-P0547-0000 0K50-P0548-0000 0017-00101-1655 0017-00009-1079 2