Download Keurig Vue V 500 Brewer Quick Guide
Transcript
Keurig® Vue® V500 Brewer Quick Start Guide Step 1 Prepare Water Reservoir A Remove all adhesive tape and labels. Lift Handle and remove shipping disc. Lower Handle. Plug into grounded outlet. B Carefully remove Water Reservoir Lid. Remove Water Reservoir by lifting up and away from the brewer. C Rinse Water Reservoir with fresh water, return Reservoir to brewer and fill to the “MAX FILL” line with water. Bottled or filtered water is recommended. The Keurig® Vue® brewer is not for use with K-Cup® packs. Step 2 Prepare Brewer 4 A Place a 10 oz. mug toward the back of the Drip Tray and press the Power Button. B Once your brewer is turned on, wait until the Touchscreen indicates “Ready” (about four minutes). C Lift and lower the Handle, then press the flashing “BREW” Button. Your brewer will dispense 8 oz. of hot water into your mug. Discard the hot water. Step 3 Brew Your First Beverage A Place your mug on the Drip Tray. L ift the Handle. B Place your favorite Vue® pack into the Holder. Note that the “spout” of the pack should face down. Lower the Handle. C If brewing a coffee Vue® pack, choose your strength and size. If you prefer a stronger brew, select “Strong.” Then select your beverage size by using the + and buttons. Once selected, press “BREW” and enjoy! After brewing certain Vue® pack varieties, we recommend performing a cleansing brew. Please refer to page 15 of the Use & Care Guide for instructions. Caution: Do not lift the Handle while heating o r brewing. Do not remove or puncture the lid of the V ue® pack prior to brewing. After brewing, use caution when removing the Vue® pack, as it will be hot. P/N 60-201394-000 Rev A 09/12