Transcript
22-31013 36-Inch Sealed Gas Cooktop page 1 of 1 Selection Stainless Cooktop Features Burner Type Bridge Burner (BTU) Power Burner (BTU) All-Purpose Burner (BTU) Simmer Burner (BTU) Simmer Burner Location Grate Styling Grate Material Dishwasher Safe Grates Cast-Iron Griddle Cooktop Surface Recessed Design Frameless Design Valves (Degrees of Turn) General Features Approved for Use w/Select Kenmore Undercounter Ovens Electronic Ignition Convertible to LP* Shipping Weight (Approx. Lbs.) Warranty 1-Year Limited Warranty – Entire Appliance 2-5 Year Limited Warranty – Cooktop Elements 22-31013 – Stainless • Stainless steel surface • One 21,000 BTU bridge burner • One 17,200 BTU power burner • One 9,500 BTU all-purpose burner (36" model only) • One 750 to 5,000 BTU simmer burner • Porcelain-coated cast-iron, continuous grates with matte finish • Gourmet Accessory Package with cast-iron griddle • Dishwasher-safe grates • Electronic ignition • Convertible to LP (kit included) 22-31013 Sealed 1@21,000 1@17,200 1@9,500 1@5,000 RR Continuous Matte Finish PorcelainCoated Cast-Iron • Included Stainless Steel • • 270 • • • 72 Parts & Labor Parts If used for other than private family purposes, warranty applies for only 90 days. Model Overall Controls 22-31013 Stainless Stainless Look Surface Stainless A *LP orifices included; conversion must be done by qualified LP installer NOTE: Drawers cannot be used with this cooktop since burner box extends 3 5/32" below surface of countertop. (Specific models only) B E RR = Right Rear 13" max. A min. 30"* 18" Matte Grates Black D C F G H** J min. K min. 24" L min. *30 min. clearance between the top of the cooking platform and the bottom of an unprotected wood or metal cabinet. 24" min. clearance when bottom of wood or metal cabinet is protected by not less than 1/8" flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper. **Includes a 5" space below cooktop for connection to gas supply line. 16406 Dimensions, Inches A B 22-31013 36 21 3/4 C 4 1/4 D 33 1/4 E 19 Cutout F G 33 7/8 - 34 1/4 19 1/8 - 19 3/4 H 8 I 1 1/2 J 2 1/2 Because of our continuous program of product improvement, Sears reserves the right to change materials and specifications without notice. Consult installation instructions packed with the product for final dimensional data. For complete warranty information, contact your local Sears Contract Sales Account Manager. K 7 L 7 22-31013.PDF Effective 08/07/06