Download JVC HR-S3600U User's Manual
Transcript
4 WATCH A RECORDED PROGRAM PAUSE POWER PLAY * You can use the available buttons on the remote control or on the VCR. REW MENU 1 2 3 4 Load a cassette with the label facing out and the window facing up. Press REW or FF to find program start point. Press PLAY to start playback. Press STOP (remote) or STOP/EJECT (VCR), then press STOP/EJECT to remove the cassette. CK POWER I U Q JOG S-VIDEO PAUSE S-VHS ET VIDEO (MONO)L—AUDIO—R CH SP EP VCR REC LINK SHATTLE REC INSERT A.DUB STOP/EJECT REC AG HR-S3600U PAUSE POWER MENU O T IDE * T R E A ST ND US P TU A E YS S EA * Please refer to the HR-S4600U/S3600U’s instruction manual for more detailed information. The Path To Enjoyment Starts Here . . . FF PLAY OK POWER JOG S-VHS ET VIDEO (MONO)L—AUDIO—R CH * You can use the available buttons on the remote control or on the VCR. CABLE/ DBS TV MBR SET A/B POWER PLAY 1 2 3 4 5 6 DAILY(M-F) WEEKLY 9 7 8 C. RESET AUX CANCEL 0 START 1 STOP TIMER DATE PROG CHECK PROG 4 CH SP/EP SKIP SEARCH PLAY REC REC MENU STOP CH +/– STOP TV CH + 1 SP/EP VIDEO CASSETTE RECORDER FF FF (Fast-Forward) PAUS E 3 OK MAKE SURE THAT YOUR PACKAGE CONTAINS: PAUSE RF CABLE (F-TYPE) CONTROLLER INFRARED REMOTE CONTROL UNIT 1 2 3 4 5 6 7 8 9 2 0 4 JOG SHATTLE SHUTTLE PLUS HR-S4600U “AA” BATTERY x 2 AUDIO/VIDEO CABLE 1 S-VIDEO CABLE 3 VO L L + TV VCR 5 RECORD A PROGRAM NUMBER EXPRESS PROGRAMMING REW (Rewind) PLAY BACK A TAPE SET CLOCK AND TUNER 2 REW SP POWER TV/VCR ENTER/OSD DISPLAY b–INSTANT TIMER RECORDING 1 Press REC to start recording. 2 Press REC to engage ITR. “0:30” appears in the VCR display. 3 To extend duration in increments of 30 minutes, press REC as many times as necessary. 2 4 STOP/EJECT ENTER TV/VCR * You cannot perform ITR using the remote control. REC TV/VCR 1 3 CHECK PACKAGE CONTENTS O 3 4 5 6 CH 䊱䊲 SITUATE AND CONNECT VCR SHATTLE REC SP/EP 1 Load a cassette as above. 2 Press CH, or press the appropriate NUMBER keys (remote) and press ENTER (remote), to select the recording channel. Press SP/EP (remote) to set the recording speed. Press REC and PLAY together (remote) or REC (VCR) to start recording. Press PAUSE to stop recording temporarily, and press PLAY to resume. Press STOP or STOP/EJECT, then press STOP/EJECT to remove the cassette. PAUSE SP EP VCR REC LINK MONO/Hi-Fi/SUPER VHS VIDEO CASSETTE RECORDERS U PLAY REW a–BASIC RECORDING FF PLAY OK CH 䊱䊲 5 RECORD A PROGRAM Dear Customer, Thank you for purchasing this JVC Video Cassette Recorder. HR-S4600U – TV V TV CH – MULTI BRAND REMOTE CONTROL UNIT U Printed in Malaysia 0499 IYV MW PJ * * COPYRIGHT © 1999 VICTOR COMPANY OF JAPAN, LTD. LPT0190-002A 2 SITUATE AND CONNECT YOUR NEW VCR a–BASIC ANTENNA/CABLE CONNECTION 5 After completing the basic connections: 1 Place the VCR on a stable, horizontal ● If you’re using a Cable Box, . . . . . . go to 2b (CATV CONVERTER CONNECTION) . ● If you’re using an AV connection, . . . . . . go to 2c (AUDIO/VIDEO CONNECTIONS). ● If you’re using an RF connection, . . . . . . go directly to 3 (PLUG & PLAY). surface. 2 Disconnect your antenna or cable line from your TV. 3 Connect your antenna to your VCR. 4 Connect your VCR to your TV. RF CONNECTION COMBINED VHF/UHF Back of VCR (example only) Back of TV (example only) ANTENNA IN TV OUT VHF/UHF SEPARATE VHF/UHF VHF ONLY VHF 3 b–CATV CONVERTER CONNECTION CATV Input CATV Input OUT IN Cable Box To TV PLUG & PLAY ANTENNA IN TV TV OUT VCR TV ANTENNA IN From Cable Box SET YOUR VCR'S CLOCK AND TUNER The VCR's clock and tuner channels are set automatically when the VCR is plugged into the AC outlet. If you use a cable box, Plug & Play will not function; set the clock and tuner channels manually. (墌 pg.11 – 15 of the HR-S4600U/S3600U’s instruction manual) From VCR TV OUT To TV VCR With this connection you can view/record any cable channel including scrambled channels to which you have subscribed. OUT IN Cable Box With this connection, you can view one scrambled cable channel while recording another unscrambled channel. 1 To watch TV with this type of connection To watch TV with this type of connection 1 Press TV/VCR on remote to engage VIDEO 1 Press CH or NUMBER keys to select desired mode. 2 Tune TV to VCR output channel (3, 4 or AV mode). 3 Tune VCR to Cable Box output channel. 4 Select desired channel on Cable Box. •You can only view the channel you’re recording. •You cannot change channels with the VCR remote control. Plug the VCR into the AC outlet. channel for recording. 2 Press TV/VCR to engage TV mode. 3 Tune TV to Cable Box output channel. 4 Select desired channel on Cable Box. •You cannot record scrambled channels. •To play back a tape, you must tune the Cable Box to the VCR output channel. 2 UHF ONLY VHF UHF CABLE TV LINE Note: Exact connector positions and names may differ. Don’t press any buttons on the VCR or remote during auto setup. c–AUDIO/VIDEO CONNECTIONS ● CONNECTORS WHICH ARE OR MAY BE REQUIRED: 䡲 RF Cable 䡲 Antenna Splitter 䡲 300-75 ohm Matching Transformer 䡲 VHF/UHF Antenna Mixer 䡲 Antenna Splitter Hi-Fi VHS VCR 佡 AV STEREO TV 3 VIDEO OUT VIDEO IN L AUDIO OUT R L AUDIO IN R SUPER VHS VCR 佡 AV STEREO TV WITH S-VIDEO INPUT TERMINALS MONAURAL VHS VCR 佡 AV TV S-VIDEO OUT S-VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN AUDIO OUT AUDIO IN L AUDIO OUT R L AUDIO IN R To Listen To VCR Sound Through A Component Stereo Audio System, Connect As Shown During auto channel setting, the channel numbers are displayed as they are scanned and set. Receivable channels are automatically assigned to CH buttons, and non-receivable channels are skipped. 5 UHF AV connection methods differ from one type of VCR to another. First, for any TV and VCR type, connect your VCR to your TV using RF connection. Then make AV connections following one of the methods pictured to the right. After making the connections, go to 3 (PLUG & PLAY). 4 VCR VIDEO OUT L AUDIO OUT R TV Monaural deck owners: Connect to VCR's AUDIO OUT AMP When setting is complete, the VCR displays the current time. You can now use your VCR. “AUTO” blinks while the VCR automatically sets the clock using information provided by the local PBS channel. NOTES: ● If the time displayed in 5 is incorrect, perform the Semi-Auto or Manual Clock Set procedure (refer to page 12 or 13 of the HR-S4600U/S3600U’s instruction manual). Auto channel set has already taken place, and is not affected. ● There are some PBS channels that do not transmit clock setting data. If your antenna cable is properly connected and “– – : – –” is displayed, perform the Manual Clock Set procedure (refer to page 13 of the HR-S4600U/S3600U’s instruction manual). Auto channel setting has not yet taken place, so please also perform the “Set Receivable Channels” procedure (refer to page 14 of the HR-S4600U/S3600U’s instruction manual).