Download Ice-O-Matic IOD 250 User's Manual
Transcript
® IOD 250 Series ICE Dispenser ✓ Stores 250 lbs. (114 Kgs.) of ICE ✓ Constructed from sturdy, corrosion-resistant 300 series stainless steel ✓ Only 30 inches (762 mm) wide IOD 250 ICE-O-Matic is the Best ICE Making Solution for: Hard Water, Food Safety and Tight Spaces ® Solution Problem Hard To Clean Power Clean Ice cube machine must be lifted off dispenser for cleaning Allows access to the dispenser for easy cleaning without moving the ICE machine Inconsistent Ice Dispensing Greater Dispensibility Ice congeals in dispenser causing Ice jams and inconsistent dispensing Auto Rotate - turns the ICE for 4 seconds every hour to consistently provide more dispensible ICE Ice Melts Too Fast Maximum Preservation Inadequate storage bin insulation causes Ice to melt too quickly Dispenser bin is insulated with foam for maximum ICE preservation - 1 inch of insulation Tight-Fitting Spaces Maximum ICE Counter space utilization Maximum ICE storage in a minimum amount of space 30 inches wide and holds 250 pounds of ICE Sloppy Ice Dispensing Ice dispenses inaccurately, often missing or overfilling the glass Worry-Free Dispensing Direct Dispense - ensures that ICE hits the glass every time. Quick Stop - prevents ICE overflow and waste. Dimensions 30" (762 mm) 1 13/16 46 mm 1 5/16 33 mm 30 7/16 773 mm RIGHT 7/16 (4) PLCS 11 mm 30 762 mm 26 7/16 672 mm OPENING 12 305 mm 9 229 mm 18 5/8 473 mm 39 5/8" (1006 mm) 30 1/4" (768 mm) (767 mm) 30 11/16 779 mm REMOVABLE SINK 9 3/16 233 mm 3 1/2 89 mm 21 1/4 7 3/4 197 mm 29 540 mm 737 mm 30 11/16 779 mm 11 5/8 295 mm 23 584 mm TO FRONT OF DRIP TRAY ON COUNTER TOP TO FRONT TOP OF DRIP TRAY RECOMMENDED COUNTER OPENING SIZE 9" X 12" FOR UTILITIES AND TUBING. OPENING CAN BE LOCATED ANYWHERE WITHIN THE SHADED AREA. Side View 2 7/8 73 mm OPERATING LIMITS Ambient Temp. Range Air & Water 16 1/4 413 mm FRONT 50° - 100°F (10° - 38°C) Water Temp. Range 40° - 100°F (4.5° - 38°C) Water Pressures Min. 20 psi Max. 120 psi Electrical Voltage Half Cube 7/8" x 7/8" x 3/8" (22mm x 22mm x 10mm) Min. -5% Max. +10% Full Cube 7/8" x 7/8" x 7/8" (22mm x 22mm x 22mm) 30 1/4 768 mm Front View ORDERING AND SPECIFICATION INFORMATION Model No. 60 Hz Dispenser Operated by: IOD 250 Push Bar Bin Storage Applied Capacity* 250 (114) Voltage Characteristics 115/60/1 Min. Circuit Ampacity No. of Wires Cord305 15 Maximum Fuse Size Shipping Weight lbs. (Kgs.) 197 (89) *Applied capacity refers to actual weight of ice: one cubic foot weighs 32.9 lbs (15 kg). Call factory for other dispensing options. ICE PRODUCTION FOR OPTIONAL CUBE ICE MAKERS — POUNDS (KILOGRAMS) PER 24 HOURS Model ICE 0250 ICE 0400 Air-Cooled lbs. (kgs.) Water-Cooled lbs. (kgs.) Remote-Cooled lbs. (kgs.) Voltage Char. 352 (160) 351 (160) n/a 115/60/1 506 (230) 528 (240) n/a 115/60/1 ICE 0500 625 (284) 567 (258) 591 (269) 115/60/1 ICE0606 706 (321) 647 (294) 727 (330) 208-230/60/1 1. Tested at 70º Air/50º Water. 2. All specifications and performace data are subject to normal manufacturing variances. Options: KWGFID KBT25022 KBT25030 water glass filler kit for 30” IOD adapter for 22” cubers on 30” IOD adapter for 22” cubers on 30” IOD 2 (1) 24/11 24/11 ICE-O-Matic’s® machines are not designed for outdoor installations. ICE-O-Matic® remote condensers are designed for outdoor installations. Machine requires voltage indicated on rating name plate. Failures caused by improper voltage are not considered factory defects. Extended periods of operation at temperature exceeding limitations constitutes misuse under the terms of ICE-O-Matic® Manufacturer’s Limited Warranty, resulting in a loss of warranty coverage. Specifications and design are subject to change without notice. S O 0 I F 0 I 1 9 D C E R T I E IOD 250 Series ICE Dispenser 2 3/4 70 mm 29 737 mm MOUNTING TEMPLATE 39 5/8 1006 mm 10 1/16 256 mm CUP CLEARANCE 3011/16" 21 1/4 540 mm We reserve the right to make changes in design and construction at any time without obligation. 2003 © ICE-O-Matic Rev Code: 4002A-08/03-SS ® ICE-O-Matic 11100 E. 45th Avenue, Denver, CO 80239 Tel. 303 371-3737 Fax. 303 371-6296 www.iceomatic.com