Transcript
Dual Monitor mounts KTP220 ™ Horizontal Table Stand FEATURES 2 1 Centris™ Technology 2 Advanced Display Mounting 1 PATENTED FEATURE Provides smooth fingertip tilt in all directions using the screen’s center of gravity. Screen angle stays set until you decide to re-adjust. Teardrop hole pattern makes mounting the screen quick and easy 3 Stable Base 4 Independent Adjustment 4 3 Heavy-duty, solid steel base and oversized pole for unmatched stability. Position each screen separately for ergonomic, horizontal alignment. 5 Cable Management Conceal and protect cables using snap-on covers and cable clips. 5 WHAT YOU NEED TO KNOW SPECIFICATIONS other product options KTP225 Widescreen Dual Hor. Table Stand KTP230 Dual Vertical Table Stand KTP320 Triple Horizontal Table Stand KTP440 Quad Monitor Table Stand KTP445 Widescreen Quad Monitor Table Stand Pole Height 14” (356 mm) Max. Width Per Monitor 22.7” (577 mm) Max. Height Per Monitor 26” (660 mm) Tilt ±15° Weight Capacity Per Monitor* 35 lbs (15.9 kg) Colors Black, Silver * Weight capacity given for KTP220. See www.chiefmfg.com for more information on other product options. RECOMMENDED ACCESSORIES TECHNICAL DRAWINGS 2” (51 mm) KSA1007 n Centris Quick Release Interface 12.5” (318 mm) KTA1000 Grommet Bolt Through Accessory n 4.5” (114 mm) 23.84” (606 mm) KTA1001 n Array Connector Ø 1.9” (48 mm) Click www.chiefmfg.com 13.25” (337 mm) 18” (457 mm) For a complete list of monitor mount accessories see page 108. 100 VESA 75 mm & 100 mm CALL 800.582.6480 FAX 877.894.6918