Transcript
DM220i Stand-mount/Bookshelf loudspeaker system Product Summary ● The total spectrum capability pop, jazz, rock, classical. Features all the distinctive qualities of the smaller models with a third driver extending both frequency response and power handling. ● Super sensitive, with high acoustical output yet affordable. Technical highlights ● Modal analysis techniques revealed a simple bonding technique of corner joints could improve rigidity and reduce coloration. ● New thinking on crossover design has also led to the provision of higher safe power handling and fuse protection overload. ● The driver chassis have non-magnetised castings for all the bass midrange units ensuring resonant free high-level sound of the highest amplitude. Drive Units 1 x 26mm high-frequency driver with Sensitivity 90dB spl (2.83V, 1m) dome/coil construction of special Power Handling 10W – 100W polymide material Dimensions Height: 680mm Width: 290mm 2 x 200mm nominal piston dia and 26mm high temperature voice coil with Depth: 320mm Finish American Walnut or Black Ash vinyl critically impregnated composite short fibre cone Frequency Response ± 3dB 53Hz to 20kHz B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged. www.bwspeakers.com