Download American Standard Town Square Right Height Round Front Toilet 2787.016 User's Manual

Transcript
TOWN SQUARE®
RIGHT HEIGHT™ ROUND FRONT TOILET
VITREOUS CHINA
TOWN SQUARE® RIGHT HEIGHT™
ROUND FRONT TOILET
❑ 2787.016
•Vitreous china
•Low-consumption (6.0 Lpf/1.6 gpf)
•Round Front siphon action jetted bowl with
2" trapway
•AquaForce flushing technology
•16-1/2" rim height for accessible applications
•American classic styling on bowl and tank
design matched to pedestal and
countertop lavatories
•Front-mounted chrome trip lever design
matched to Town Square faucets
•Design matched molded round front Town
Square seat and cover (5720.011) included
•2 bolt caps
•Internal trapway area fully glazed
•100% factory flush tested
25 ± 6mm (1 ± 1/4)
FINISHED WALL
❑ 3787.016 Bowl
❑ 4707.016 Tank
203mm
(8)
Nominal Dimensions:
692 x 508 x 857mm
(27-1/4" x 20" x 33-3/4")
508mm
(20)
692mm
(27-1/4)
C/L
C/L OF SEAT POST
MTG HOLES ON
140mm (5-1/2) CTRS
391mm
(15-3/8)
432mm
(17)
857mm
(33-3/4)
Fixture and seat only, supply by others
Compliance Certifications Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
429mm
(16-7/8)
* 203mm
(8)
13mm (1/2)
89mm (3-1/2)
343mm (13-1/2)
152mm (6)
305mm
(12)
To Be Specified:
❏ Color:
❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black
❏ Alternate Seat:
❏ Supply with stop:
C/L OF OUTLET AND
TOILET MTG BOLTS
FINISHED
FLOOR
273mm
(10-3/4)
* 152mm (6)
C/L OF SUPPLY
AS REQUIRED
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
DIMENSIONS SHOWN FOR LOCATION OF SUPPLY ARE SUGGESTED.
*SUPPLY
NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
© 2008 AS America Inc.
K46
Revised 2/08