Download American Standard Standard 4223S User's Manual

Standard®
TWO-HANDLE PANTRY/BAR SINK FAUCET
WITH BRASS GOOSENECK SPOUT
MODEL NUMBER:
4223 Bar Sink Faucet
Porcelain lever handles. Chrome Finish.
4223S Bar Sink Faucet
Porcelain lever handles. Satin (PVD) Finish.
311mm
(12-1/4")
152mm
(6")
200mm
(7-7/8")
264mm
(10-3/8")
132mm
(5-1/8")
35mm - 38mm
(1-3/8" - 1-1/2")
DIA. MOUNTING
HOLES (2)
25mm
(1")
102mm
(4")
159mm
(6-1/4")
GENERAL DESCRIPTION:
Durable brass construction. 1/4 turn washerless ceramic disc
valve cartridges - reversible for use on "hot" or "cold" side.
One-half inch male inlet shanks with brass coupling nuts.
Brass 22mm (7/8") diameter swivel spout. Genuine porcelain
lever handles. Brass escutcheon plate (escutcheon size
6-1/4"L x 2-1/2"D). 2.2 gpm/8.3 L/min. maximum flow rate.
PRODUCT FEATURES:
Ceramic Disc Valve Cartridges: Assures a lifetime of
drip-free performance.
Brass Construction & Cast Brass Waterway: Durable Excellent in high use applications. Ideal for prolonged contact
with water.
Larger Spout: Increased spout height, reach and diameter.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65 lead
requirements.
Choice of finishes: Available in Polished Chrome or Satin
Nickel finish.
SUGGESTED SPECIFICATION:
Two handle centerset bar sink faucet shall feature brass construction with all brass inlet shanks and coupling nuts. Shall also
feature 1/4 turn washerless ceramic disc valve cartridges that are reversible for use on "hot" or "cold" side. Fitting shall be
American Standard Model # 4223_.
© 2008 AS America Inc.
A55
Standard®
TWO-HANDLE PANTRY/BAR SINK FAUCET
WITH BRASS GOOSENECK SPOUT
CODES AND STANDARDS
FLOW RATE*
3.0
GALLONS PER MINUTE
These products meet or exceed the following
codes and standards:
ASME A112.18.1
CSA B 125
NSF 61/Section 9
2.5
2.0
1.5
1.0
0.5
0.0
20
40
60
80
100
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
Product
Number
Description
4223
Bar Sink Faucet. Porcelain lever handles. Chrome finish.
4223S
Bar Sink Faucet. Porcelain lever handles. Satin Nickel (PVD) finish.
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
© 2008 AS America Inc.
A56