Transcript
RAVENNA™ ROUND FRONT TOILET VITREOUS CHINA RAVENNA™ ROUND FRONT TOILET ❑ 2648.016 • Vitreous china • Low-consumption (6.0 Lpf/1.6 gpf) • Round front siphon action jetted bowl • Fully glazed 2" trapway • AquaForce flushing technology • D-shaped style tank with fitted tank cover • Chrome trip lever • Speed Connect™ tank/bowl coupling system • Sanitary bar on bowl • 2 color matched bolt caps • 100% factory flush tested • Design coordinated to Ravenna pedestal lavatory ❑ 3454.016 Bowl ❑ 4096.016 Tank FINISHED WALL Alternate Tank: ❑ 4096.516 with Aquaguard tank liner 699mm (27-1/2) 19mm ± 6mm (3/4 ± 1/4) Nominal Dimensions: 699 x 476 x 737mm (27-1/2" x 18-3/4" x 29") 419mm (16-1/2) 737mm (29) 83mm (3-1/4) SUPPLY AS REQ'D 381mm (15) *222mm (8-3/4) 16mm (5/8) 178mm (7) 305mm (12) To Be Specified: ❏ Color: ❏ Seat: American Standard #5322.011 “Rise and Shine" solid plastic, closed front, round front seat with cover. ❏ Seat: American Standard #5308.014 “Laurel" molded closed front seat with cover. ❏ Alternate Seat: ❏ Supply with stop: C/L C/L OF SEAT POST HOLES 140mm (5-1/2 CENTERS) Fixture only, seat and supply by others Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.2M for Vitreous China Fixtures includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimension 476mm (18-3/4) 222mm (8-3/4) 305mm (12) 381mm (15) 152mm (6) FINISHED FLOOR 241mm (9-1/2) C/L OF OUTLET NOTES: THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET. DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED. *SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. K64 © 2006 American Standard Inc. Revised 5/05