Download American Standard Pekoe 4332.100 User's Manual
Transcript
PEKOE™ SINGLE CONTROL KITCHEN FAUCET WITH PULL-OUT SPRAY MODEL NUMBER: 4332.100 Kitchen Faucet with Pull-Out Spray 217mm (8-1/2) 324mm (12-3/4) 262mm (10-1/4) 154mm (6) 51mm (2) 33 to 38mm (1-3/8 to 1-1/2) DIA. MOUNTING HOLE 400mm (15-3/4) 733mm (28-3/4) GENERAL DESCRIPTION: PRODUCT FEATURES: Forged brass body with brass swivel spout and metal lever handle. Pull-out spray with adjustable spray pattern and push button activation. Metal reinforced hose. Washerless 40mm ceramic disc valve cartridge. Complete with two integral check valves. Braided flexible supply hoses with 3/8" compression connectors. 2.2 gpm/8.3Lmin. maximum flow rate. Ceramic Disc Valve Cartridge: Assures smooth, precise valve control and a lifetime of drip-free, maintenance-free performance. Brass and Copper Waterway: Highest quality materials for durability & long life. Memory Position Valving: Allows user to turn valve on and off at preferred temperature setting without readjusting handle position each time. Low Lead: Meets NSF Standard 61/Section 9 & Prop 65 lead requirements. Pull-out Spray: Adjustable spray patterns - stream to spray. Integral Check Valves: Prevents back flow. Choice of Finishes: Choice of Polished Chrome or Stainless Steel (PVD). SUGGESTED SPECIFICATION: Single control kitchen faucet shall feature a forged brass body with swivel spout and metal lever handle. Shall also feature washerless ceramic disc valve cartridge, flexible supply hoses and two integral check valves. Fitting shall be American Standard Model # 4332.100.____ © 2008 AS America Inc. A13 PEKOE™ SINGLE CONTROL KITCHEN FAUCET WITH PULL-OUT SPRAY CODES AND STANDARDS FLOW RATE* GALLONS PER MINUTE These products meet or exceed the following codes and standards: ANSI A117.1 ASME A112.18.1 CSA B125 NSF 61 / Section 9 3.0 2.5 2.0 1.5 1.0 0.5 0.0 20 40 60 80 100 INLET PRESSURE (PSI) *Flow rates shown are for mixed hot and cold. Finish Options Product Number Description 4332.100 Pull-out Kitchen Faucet Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged. © 2008 AS America Inc. A14 Polished Chrome PVD Stainless Steel 002 075