Download American Standard Colony Set Two-Handle Centerset Bar Sink Faucet 2475.500 User's Manual
Transcript
COLONY SOFT TWO-HANDLE CENTERSET BAR SINK FAUCET WITH BRASS GOOSENECK SPOUT MODEL NUMBER: 2475.500 Centerset Bar Sink Faucet Lever handles. 332mm (13-1/16) 127mm (5) 74mm (2-7/8) 181mm (7-1/8) 1/2 NPSM 35mm - 38mm (1-3/8" to 1-1/2") DIA. MOUNTING HOLES (2) 25.4mm (1-1/16) 30mm (1-1/4) GENERAL DESCRIPTION: PRODUCT FEATURES: Durable brass construction. 1/4 turn washerless ceramic disc valve cartridges. One-half inch male inlet shanks with brass coupling nuts. Brass gooseneck swivel spout. 2.2gpm/8.3L/min. maximum flow rate. Ceramic Disc Valve Cartridges: Assures a lifetime of drip-free performance. Solid Brass Construction: Durable. Ideal for prolonged contact with water. Low Lead: Meets NSF Standard 61/Section 9 & Prop 65 lead requirements. Choice of Finishes: Available in Polished Chrome or Satin Nickel (PVD). SUGGESTED SPECIFICATION: Centerset bar sink faucet shall feature brass construction with brass inlet shanks and brass coupling nuts. Shall also feature 1/4 turn washerless ceramic disc valve cartridges. Fitting shall be American Standard Model # 2475.500.___. © 2008 AS America Inc. A59 COLONY SOFT TWO-HANDLE CENTERSET BAR SINK FAUCET WITH BRASS GOOSENECK SPOUT CODES AND STANDARDS FLOW RATE* 3.0 GALLONS PER MINUTE These products meet or exceed the following codes and standards: ANSI A117.1 ASME A112.18.1 CSA B 125 NSF 61/Section 9 2.5 2.0 1.5 1.0 0.5 0.0 20 40 60 80 100 INLET PRESSURE (PSI) *Flow rates shown are for mixed hot and cold. Finish Options Product Number 2475.500 Polished Chrome Description 002 Bar Sink faucet. Lever handles. Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged. © 2008 AS America Inc. A60 PVD Satin Nickel 295