Transcript
COLONY ROUND™ COUNTERTOP SINK ENAMELED STEEL COLONY ROUND™ COUNTERTOP SINK • Acid-resisting enamel steel • Front overflow • Self-rimming with cutout template supplied • Two soap depressions • Mounting clamps supplied ❏ 3003.605 Faucet holes on 4" (102mm) centers Nominal Dimensions: 483mm (19") Round Bowl sizes: 381mm (15") wide 279mm (11") front to back 152mm (6") deep Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.4M for Enameled Steel Plumbing Fixtures FINISHED WALL OR SPLASHBACK (3) 32mm(1-1/4) DIA. HOLES OPTIONAL 92mm (3-5/8) SOAP DEPRESSIONS 229mm (9) 102mm (4) To Be Specified: ❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Faucet*: ❏ Faucet Finish: ❏ Supplies: ❏ 1-1/4" Trap: (4) RETAINERS FOR MOUNTING LUGS 483mm (19 DIA.) * See faucet section for additional models available COUNTERTOP (BY OTHERS) 6mm (1/4) 184mm (7-1/4) * 254mm (10) * 330mm (13) 178mm (7) 787mm (31) TO FINISHED FLOOR 203mm (8) SUPPLIES AS REQ'D 1-1/4 O.D. WASTE COUNTERTOP 21mm (13/16) MAX. CLAMPING DETAIL 1-1/4 O.D. TAILPIECE LUG AND SCREW ASSEMBLY FINISHED FLOOR NOTES: DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE SUGGESTED. FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE TEMPLATE SUPPLIED WITH SINK. FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. * IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.4. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. © 2008 AS America Inc. J59 Revised 2/08
