Download American Standard 7274.585 User's Manual

Installation Instructions
LABORATORY VALVES WITH WALL FLANGE
Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please read these instructions carefully
before you begin.
7274.580
7274.585
M968496
ROUGHING-IN DIMENSIONS
3-1/8"
[79mm]
INDEX AS REQUIRED
(AIR, GAS, VAC)
1/16"- 1-1/4"
[2mm-32mm]
WARE THICKNESS
1-7/8"
[48mm]
7274.580
11/16" DIA.
[17mm]
2-1/8"
[54mm]
2-1/8 " [54mm]
DIA. FLANGE
3/8" NPT MALE
THREAD INLET
5-1/2"
[140mm]
3-3/4"
[95mm]
INDEX AS REQUIRED
(AIR, GAS, VAC)
7274.585
3-1/4"
[83mm]
1-1/4"
[2mm-32mm]
WARE THICKNESS
11/16" DIA.
[17mm]
2-1/8"
[54mm]
3/8" NPT MALE
THREAD INLET
2-1/8 " [54mm]
DIA. FLANGE
6-5/8"
[168mm]
TOOLS AND SUPPLIES REQUIRED
Teflon Tape
Adjustable Wrench
Plumbers' Putty or
Caulking
Channel Locks
1
INSTALL FITTING
MOUNTING HOLE
1-1/4" DIA. (32mm)
Remove lock nut and steel washer from fitting.
Align and mount fitting from the front side of the mounting surface.
body and install
steel washer and lock nut. Tighten the lock nut securely.
LOCK NUT
STEEL WASHER
With fitting now firmly secured to the mounting surface Use
piping to the fitting. (See rough-in for piping requirements).
WALL MOUNTING SURFACE
Turn service on to fitting and check for leaks.
GAS INDEX
M962313-0070A
AVAILABLE REPAIR PARTS
AIR INDEX
M962314-0070A
7274.580
7274.585
VAC INDEX
M962315-0070A
GAS INDEX
M962313-0070A
HANDLE
M962310-0020A
AIR INDEX
M962314-0070A
VAC INDEX
M962315-0070A
CARTRIDGE
M962336-0070A
SERRATED TIPS
M962318-0020A
HOTLINE FOR HELP
For toll-free information and answers to your questions, call:
1 (800) 442-1902
Weekdays
8:00 to 7:00 p.m. Eastern Time
1-800-387-0369
CANADA
(TORONTO 1-905-306-1093)
Product names listed herein are trademarks of American Standard Inc. © A m e r i c a n S t a n d a r d I n c . 2 0 0 4
ERRATED TIPS
M962318-0020A
M968496