Download American Dryer Corp. EURO-14 User's Manual
Transcript
Euro-14 Parts Manual 24 VAC Phase 5 Coin Phase 6 OPL American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail: [email protected] www.amdry.com ADC Part No. 450578 Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer. The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location. FOR YOUR SAFETY POUR VOTRE SÉCURITÉ Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil. We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models. Important For your convenience, log the following information: DATE OF PURCHASE ____________________________ MODEL NO. Euro-14 __________________________________________ RESELLER’S NAME _______________________________________________________________________________________ Serial Number(s) ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly. The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering. “IMPORTANT NOTE TO PURCHASER” Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer. Table of Contents Control Door Assembly .......................................................................................................................... 3 Phase 6 Non-Coin Microprocessor Control Panel Assembly ................................................................... 4 Phase 6 Non-CoinMicroprocessor Control Box Assembly ...................................................................... 5 Phase 5 Coin Microprocessor Control Panel Assembly ........................................................................... 6 Dual Timer Control Panel Assembly ........................................................................................................ 7 Coin and Dual Timer Control Box Assembly ............................................................................................ 8 Coin Vault Assembly ............................................................................................................................... 9 Front Panel Assembly ........................................................................................................................... 10 Main Door “Steel” Assembly ................................................................................................................ 11 Main Door Switch Assembly ................................................................................................................. 12 Tumbler/Support Assemblies ................................................................................................................. 13 Lint Drawer/Lint Drawer Switch Assemblies For Models Mfd. as of September 8, 2000 ..................................................................................... 14 Lint Drawer/Lint Drawer Switch Assemblies For Models Mfd. prior to September 8, 2000 ................................................................................. 15 Idler Bearing Assembly ................................................................................................................... 16, 17 Tumbler Bearing Assembly For Models Mfd. as of July 17, 2000 ........................................................................................ 18, 19 Tumbler Bearing Assembly For Models Mfd. prior to July 17, 2000 .................................................................................... 20, 21 Non-Reversing Totally Enclosed, Fan Cooled Motor Mount Assembly ............................................ 22, 23 Reversing Totally Enclosed, Fan Cooled Motor Mount Assembly .................................................... 24, 25 Sensor Bracket Assemblies ............................................................................................................. 26, 27 Gas Burner Assembly ..................................................................................................................... 28, 29 Electric Oven Assembly .................................................................................................................. 30, 31 Single-Phase (1ø) Motor, Electric Relay Panel Assembly ....................................................................... 32 3-Phase (3ø) Motor, Electric Relay Panel Assembly .............................................................................. 33 Reversing Electric Relay Panel Assembly ......................................................................................... 34, 35 Steam Coil/Air Operated Steam Damper Assembly ......................................................................... 36, 37 Steam Coil/Mechanical Steam Damper Assembly ............................................................................ 38, 39 Outer Top/Back Guard Assemblies ....................................................................................................... 40 Microprocessor Coin Acceptors Listing ................................................................................................ 41 Electrical Oven Component Application Chart ....................................................................................... 42 Additional Parts Available ..................................................................................................................... 43 Control Door Assembly Illus. No. 1 2 3 4 5 6 7 8 9 10 450578-2 Part No. Qty. 160015 1 160017 1 160104 160052 112367 882511 1 1 1 1 882513 1 882512 1 117603 150300 102603 150300 102502 102601 3 2 1 2 1 1 Description High Security MK-100 Lock Assembly with Key (for coin models Only) Special Dummy Lock Only (for non-coin models Only) MK-100 Key Only Lock Cam Only Euro Logo with Tape White Control Door Assembly Less Lock (includes illus. nos. 4 and 5) Almond B Control Door Assembly Less Lock (includes illus. nos. 4 and 5) Coral Blue Control Door Assembly Less Lock (includes illus. nos. 4 and 5) Noise Suppressor Tape (sold by the foot) #10-16 x 1/2” Hex Washer TEK Screw Control Door Rod Support Catch #10-16 x 1/2” Hex Washer TEK Screw Control Door Support Rod Control Door Rod Retainer Clip Telephone: (508) 678-9000 / www.amdry.com 3 Phase 6 Non-Coin Microprocessor Control Panel Assembly Illus. No. 1 Qty. 112537 112276 1 1 112275 1 112277 1 112278 1 881745 881747 1 1 881746 1 3 137123 1 4 5 6 7 8 9 137122 150005 153010 150309 136048 136017 136019 1 3 3 1 1 1 1 2 4 Part No. Description Phase 6 Non-Coin Keyboard Non-Coin Stick-On Labels (English Only)...Not Illustrated 3-Language Non-Coin Stick-On Labels (Spanish, Italian, and Hebrew)...Not Illustrated 3-Language Non-Coin Stick-On Labels (English, Spanish, and Hebrew)...Not Illustrated 5-Language Non-Coin Stick-On Labels (Italian, Dutch, French, German, and Chinese)...Not Illustrated Phase 6 Microprocessor Controller (computer) Panel Only Phase 6 Non-Coin Non-Reversing Computer Panel Assembly Complete (includes illus. nos. 1 through 5 and 7 through 9) Phase 6 Non-Coin Reversing Computer Panel Assembly Complete (includes illus. nos. 1 through 5 and 7 through 9) Phase 6 Non-Coin Non-Reversing Microprocessor Controller (computer) Only Phase 6 Non-Coin Reversing Microprocessor Controller (computer) Only #6-32 x 3/4” Phillips Round Head Machine Screw #6 Star Washer #10-16 x 1/2” Hex Head TEK Crimptite Screw 1/8-Amp (Slo-Blo) Fuse 3.15-Amp (fast acting) Fuse 1-Amp (fast acting) Fuse American Dryer Corporation 450578-2 Phase 6 Non-Coin Microprocessor Control Box Assembly Illus. No. 1 2 3 4 5 -* Part No. 122648 122646 122640 122644 122706 122801 Qty. 1 1 1 1 * 1 Description 4-Pin Connector 2-Pin Connector 9-Pin Connector 6-Pin Terminal Socket Terminal ONLY Pin/Socket Extraction Tool As needed. 450578-2 Telephone: (508) 678-9000 / www.amdry.com 5 Phase 5 Coin Microprocessor Control Panel Assembly Illus. No. 1 2 Part No. Qty. 112526 801213 1 1 801229 1 5 6 7 801259 801258 150309 137213 824998 153010 150005 -------- 1 1 1 1 1 2 2 1 8 -------- 1 9 10 137023 137021 880772 122800 136048 1 3 1 1 1 3 4 11 Description Coin Keyboard Label Assembly Phase 5 Coin Control Panel Assembly (includes illus. nos. 1, 2, 4, 5, and 6) Phase 5 Coin Control Panel Assembly with Battery Option (includes illus. nos. 1, 2, 4, 5, and 6) Coin Control Panel Only Coin Control Panel Only with Battery Bracket #10-16 x 1/2” Hex Head TEK Crimptite Screw Phase 5 Coin Controller Only Phase 5 Battery Clip #6 Star Washer #6-32 x 1/4” Phillips Round Head Machine Screw Microprocessor Coin Acceptor (refer to Microprocessor Coin Acceptors Listing on page 41) Optic Switch Only (refer to Microprocessor Coin Acceptors Listing on page 41) Optic Switch Connector Only Microprocessor Socket Only Single Coin Optical Switch Harness Microprocessor (female) Pin Extraction Tool 1/8-Amp (Slo-Blo) Fuse IMPORTANT: Check label on computer chip to verify correct part number of controller (computer). 6 American Dryer Corporation 450578-2 Dual Timer Control Panel Assembly Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 450578-2 Part No. Qty. 123005 122400 818051 1 1 1 882600 1 850456 131917 150207 154001 152000 153010 120730 150110 131932 151000 112050 124103 124025 124030 132198 1 1 2 2 2 2 1 4 1 4 1 2 1 1 1 Description Red Indicator Light - 24 VAC Rocker Heat Selector Switch Dual Timer Control Panel Assembly Complete - 24 VAC (includes illus. nos. 1 through 16) Dual Timer Reversing Control Panel Assembly Complete - 24 VAC (includes illus. nos. 1 through 17) Dual Timer Control Panel Only Push-To-Start Relay - 24 VAC #10-24 x 1/2” Phillips Pan Head Machine Screw #10-24 Speed Nut #6-32 Hex Nut #6 Star Washer 30-Position Terminal Block #8-32 x 1/4” Phillips Round Head Machine Screw Dual Timer Relay - 24 VAC #6-32 Pal Nut Dual Timer Label Only Arrow Timer Knob 60-Minute Timer - 24 VAC 15-Minute Timer - 24 VAC Reversing Timer - 24 VAC Telephone: (508) 678-9000 / www.amdry.com 7 Coin and Dual Timer Control Box Assembly Illus. No. * 8 Part No. Qty. 1 2 150301 131931 2 1 3 4 -5 6 122641 122706 122801 150301 132198 1 * 1 2 1 Description #8-18 x 7/16” Phillips Pan Head TEK Screw Heat Relay - 24 VAC (for dual timer models Only) 15-Pin Microprocessor Controller (computer) Connector Socket Terminal Only Pin/Socket Extraction Tool #8-18 x 7/16” Phillips Pan Head TEK Screw Reversing Timer 24v (for coin models Only) As required. American Dryer Corporation 450578-2 Coin Vault Assembly Illus. No. 1 Qty. 802112 1 802117 802110 1 1 4 802115 160028 875061 160105* 802020 1 1 1 1 1 5 6 7 8 152014 102502 102601 102603 4 1 1 1 2 3 * Part No. Description Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 5) Microprocessor Coin Vault Only Non-Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 5) Non-Microprocessor Coin Vault Only Cam for 1/4 Turn Lock Only 1/4 Turn Lock with Key and Cam 1/4 Turn Mer-Pel Key Only 1/4 Turn Coin Box Assembly (includes illus. nos. 2 through 4) 1/4-20 Free Spin Wash Nut Control Door Support Rod Control Door Rod Retainer Clip Control Door Rod Catch Specify key number when ordering. 450578-2 Telephone: (508) 678-9000 / www.amdry.com 9 Front Panel Assembly Illus. No. 1 10 Qty. 883137 1 883138 1 883139 1 817052* 1 3 150313 150318 -------- 11 1 1 4 -------- 1 5 881987 1 6 154215 2 2 * Part No. Description White Front Panel Assembly (includes illus. nos. 1, 5, and 6) (for models mfd. as of January 18, 2000) Coral Blue Front Panel Assembly (includes illus. nos. 1, 5, and 6) (for models mfd. as of January 18, 2000) Ivory Front Panel Assembly (includes illus. nos. 1, 5, and 6) (for models mfd. as of January 18, 2000) Front Panel (includes illus. nos. 1, 5, and 6) (for models mfd. prior to January 18, 2000) #10-16 x 1/2” TORX Plus BTN Type 1 25 IP TORX Plus Bit 1/4 Hex (for removal of TORX head screw) Main Door Hinge (refer to Main Door “Steel” Assembly on page 11) Lint Drawer Switch (refer to Lint Drawer/Lint Drawer Switch Assemblies on page 14) Friction Door Latch (includes illus. nos 5 and 6) 5/32” Pop Rivet Specify color when ordering. American Dryer Corporation 450578-2 Main Door “Steel” Assembly Illus. No. Part No. Qty. 1 881150 1 2 3 102354 170730 170731 881152 1 1 1 1 4 5 6 150445 153031 881151 2 1 1 7 8 9 10 11 12 13 14 15 150445 150683 152014 151010 150120 150683 152014 881210 102211 102218 2 3 3 1 1 3 3 1 1 1 170730 170731 1 1 450578-2 Description Black Main Door Assembly Complete (includes illus. nos. 1, 2, and 8 through 15) Door Gasket Clear Glass Adhesive (10.3 oz. cartridge) Black Glass Adhesive (10.3 oz. cartridge) Black Top Hinge Block Assembly (includes illus. nos. 3 and 4) 1/4-20 x 3/4” Black Cap Head Setscrew 1/4” Nylon Washer Black Bottom Hinge Block Assembly (includes illus. nos. 5, 6, and 7) 1/4-20 x 3/4” Black Cap Head Setscrew 1/4-20 x 5/8” Black Carriage Bolt 1/2-20 Free Spin Wash Nut #10-32 Black Hex Acorn Nut Door Latch Screw 1/4-20 x 5/8” Black Carriage Bolt 1/2-20 Free Spin Wash Nut Black Main Door Handle Only 20-7/16” Door Glass 20-7/16” Door Glass with 4 Holes (for models mfd. between February 2, 2001 and September 6, 2001) Clear Glass Adhesive (10.3 oz. cartridge) Black Glass Adhesive (10.3 oz. cartridge) Telephone: (508) 678-9000 / www.amdry.com 11 Main Door Switch Assembly Illus. No. 12 Part No. Qty. 1 2 3 4 5 6 150006 152013 153010 137005 122636 881211 881153 2 2 2 1 2 1 1 7 150301 2 Description #6-32 x 7/8” Phillips Pan Head Machine Screw #6-32 Hex Nut #6 Star Washer Door Switch Flag Terminal Black Main Door Switch Housing Only Black Main Door Switch Housing Complete (includes illus. nos. 1, 2, 3, 4, and 6) #8-18 x 7/16” Phillips Pan Head TEK Screw American Dryer Corporation 450578-2 Tumbler/Support Assemblies Illus. No. 1* Part No. 882519 882520 882521 882522 Qty. 1 1 1 1 882524 882523 2 3 4 5 6 7 8 9 10 11 -* 150313 301304 322002 322003 322001 322000 322066 322067 150518 100918 153004 882517 152005 153005 153004 116002 401010 40 4 2 2 2 2 2 2 1 4 4 1 4 4 4 1 1 Description Galvanized Tumbler Only (without felt collar) Stainless Steel Tumbler Only (without felt collar) Polished Stainless Steel Tumbler Only (without felt collar) Galvanized Tumbler/Support Assemblies (includes illus. nos. 1 through 10) Stainless Steel Tumbler/Support Assemblies (includes illus. nos. 1 through 10) Polished Stainless Steel Tumbler/Support Assemblies Only (without felt collar) #10-16 x 1/2” TORX Plus Galvanized Tumbler Rib Only Galvanized Taper Tumbler Rib Galvanized Straight Tumbler Rib Stainless Steel Straight Tumbler Rib Stainless Steel Tapered Tumbler Rib Polished Stainless Steel Tumbler Rib Polished Stainless Steel Tapered Tumbler Rib 5/16-18 x 3/8” Socket Button Head Screw 3/8-16 x 26 3/4” Tie Rod 3/8” Flat Washer Tumbler Support Only 3/8-16 Hex Nut 3/8” Lock Washer 3/8” Flat Washer Felt Collar Only #847 Adhesive for Felt Collar (5.0 oz. tube) Felt collar is not included and must be ordered separately. 450578-2 Telephone: (508) 678-9000 / www.amdry.com 13 Lint Drawer/Lint Drawer Switch Assemblies For Models Mfd. as of September 8, 2000 Illus. No. 1 2 3 4 5 6 7 8 9 * 14 Part No. Qty. 883155 1 883156 1 883157 1 117605 122116 122605 122701 122801 833229 5 1 1 or 2 * 1 1 818087 1 304136 150301 122700 122604 1 2 * 1 or 2 Description White Lint Drawer Assembly (includes illus. nos. 1 and 2) Coral Blue Lint Drawer Assembly (includes illus. nos. 1 and 2) Ivory Lint Drawer Assembly (includes illus. nos. 1 and 2) Gasket (sold by the foot) Lint Drawer Switch 4-Pin Socket Connector Only Socket Terminal Only Pin/Socket Extraction Tool Lint Drawer Switch Box Assembly (includes illus. nos. 4 through 7) (for Non-Coin models Only) Lint Drawer Switch Box Assembly (includes illus. nos. 4 through 7) (for coin models Only) Lint Drawer Switch Box Only #8-18 x 7/16” Phillips Pan Head TEK Screw Pin Terminal Only 4-Pin Connector Only As required. American Dryer Corporation 450578-2 Lint Drawer/Lint Drawer Switch Assemblies For Models Mfd. prior to September 8, 2000 Illus. No. 1 2 3 4 5 6 7 8 9 10 * Part No. Qty. 882514 1 882515 1 882516 1 117605 108224 122116 122605 122701 122801 833229 5 1 1 1 or 2 * 1 1 818087 1 304136 150301 122700 122604 1 2 * 1 or 2 Description White Lint Drawer Assembly (includes illus. nos. 1 and 2) Coral Blue Lint Drawer Assembly (includes illus. nos. 1 and 2) Almond B Lint Drawer Assembly (includes illus. nos. 1 and 2) Neoprene Sponge Tape (sold by the foot) Lint Screen Assembly Lint Drawer Switch 4-Pin Socket Connector Socket Terminal Only Pin/Socket Extraction Tool Lint Drawer Switch Box Assembly (includes illus. nos. 4 through 7) (for Non-Coin models Only) Lint Drawer Switch Box Assembly (includes illus. nos. 4 through 7) (for coin models Only) Lint Drawer Switch Box Only #8-18 x 7/16” Phillips Pan Head TEK Screw Pin Terminal Only 4-Pin Connector Only As required. 450578-2 Telephone: (508) 678-9000 / www.amdry.com 15 Idler Bearing Assembly 16 American Dryer Corporation 450578-2 Idler Bearing Assembly Illus. No. 1 Part No. Qty. 4 5 6 100100 100108 101129 100105 100112 154301 100705 882576 1 1 1 1 1 2 1 1 7 8 9 10 11 12 150617 153005 153004 801009 152004 150509 2 2 2 1 1 1 2 3 450578-2 Description 5L-660 V-Belt (tumbler to idler) - Non-Reversing Models Only 5L-680 V-Belt (tumbler to idler) - Reversing Models Only 9” x 2-1/2” Compound Pulley 4L-520 V-Belt (idler to motor) - Non-Reversing Models Only 4L-610 V-Belt (idler to motor) - Reversing Models Only 5/16-18 x 1” Allen Setscrew 3/16” x 3/16” x 1-3/8” Key Idler Bearing Assembly Complete (includes illus. nos. 5 through 12) 3/8-16 x 1” Hex Head Machine Bolt 3/8” Lock Washer 3/8” Flat Washer Idler Square Washer 5/16-18 Hex Nut 5/16-18 x 3” Hex Head Machine Bolt Telephone: (508) 678-9000 / www.amdry.com 17 Tumbler Bearing Assembly For Models Mfd. as of July 17, 2000 18 American Dryer Corporation 450578-2 Tumbler Bearing Assembly For Models Mfd. as of July 17, 2000 Illus. No. 1 2 3 4 Part No. Qty. 880220 153025 152050 882544 1 4 4 1 882545 1 882542 882543 1 1 5 880202 880779 1 1 6 7 8 9 10 11 12 13 14 15 16 17 150601 153004 153004 153005 152005 154326 152004 150621 153002 153004 150501 102120 2 2 2 2 2 2 2 2 4 6 4 1 18 19 824807 100724 1 1 100713 1 100735 1 101100 1 101118 1 21 101110 1 22 100100 1 100108 1 150610 152004 2 2 20 23 24 450578-2 Description 1-3/4” Flange Bearing 9/16” Lock Washer 9/16-12 Hex Nut Pillow Block Bearing Assembly Complete (includes illus. nos. 4 through 17, 23, and 24) Pillow Block Bearing Assembly Complete with Rotational Sensor (includes illus. nos. 4 through 18, 23, and 24) Pillow Block Bearing Platform Only Pillow Block Bearing Platform Only (for models with rotational sensor) 1-3/8” Pillow Block Bearing 1-3/8” Pillow Block Bearing (for reversing models Only) 3/8-16 x 2” Hex Bolt 3/8” Flat Washer 3/8” Flat Washer 3/8” Lock Washer 3/8-16 Hex Nut 5/16-24 x 3/8” Setscrew 5/16-18 Hex Nut 5/16-18 x 1-1/2” Tap Bolt 5/16” Lock Washer 3/8” Flat Washer 5/16-18 x 3/4” Tap Bolt Sintered 8 Magnet (for reversing models Only) Rotational Sensor Assembly Shaft Key (for non-reversing models mfd. as of July 9, 2001) Shaft Key (for non-reversing models mfd. prior to July 9, 2001) Shaft Key (for reversing models Only) 18” Pulley (for non-reversing models Only) 18-3/4” Pulley (for reversing models Only) 1” Taper Lock Bushing (for reversing models Only) 5L-660 V-Belt (tumbler to idler) (for non-reversing models Only) 5L-680 V-Belt (tumbler to idler) (for reversing models Only) 5/16-18 x 1-1/2 Allen Setscrew 5/16-18 Hex Nut Telephone: (508) 678-9000 / www.amdry.com 19 Tumbler Bearing Assembly For Models Mfd. prior to July 17, 2000 20 American Dryer Corporation 450578-2 Tumbler Bearing Assembly For Models Mfd. prior to July 17, 2000 Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Qty. 880220 153025 152050 150508 153005 152005 150600 153004 153005 152005 150501 153002 153001 150621 152004 801101 1 4 4 2 2 2 2 * 2 2 4 4 4 2 2 1 801103 1 17 18 801105 801104 880779 1 1 1 19 20 21 880202 152004 150610 101100 1 2 2 1 101118 1 101110 1 100735 154301 100713 100100 1 2 1 1 100108 1 824807 1 22 23 24 25 * Part No. Description 1-3/4” Flange Bearing with Nylock Setscrew 9/16” Lock Washer 9/16-12 Hex Nut 3/8-16 x 3/4” Hex Head Machine Bolt 3/8” Lock Washer 3/8-16 Hex Nut 3/8-16 x 1-1/2” Hex Head Machine Bolt 3/8” Flat Washer 3/8” Lock Washer 3/8-16 Hex Nut 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 5/16-18 x 1-1/2” Hex Head Machine Bolt 5/16-18 Hex Nut 1-3/8” Bearing Box Assembly Complete (includes illus. nos. 4 through 20) (for models mfd. without rotational sensor) 1-3/8” Bearing Box and Support Only (includes illus. nos. 4, 5, 6, 16, and 17) 1-3/8” Bearing Box Only Pillow Block Bearing Support Only 1-3/8” Pillow Block Bearing Assembly with Magnet (for models mfd. with rotational sensor) 1-3/8” Pillow Block Bearing with Nylock Setscrew 5/16-18 Hex Nut 5/16-18 x 1-1/2” Allen Setscrew 18” Pulley (for non-reversing models Only) 18-3/4” Pulley (for reversing models Only) 1” Taper Lock Hub (key not included) (for reversing models Only) Shaft Key (for taper lock hub) 5/16-18 x 1” Allen Setscrew 1/4” x 1/4” x 7/8” Key 5L-660 V-Belt (tumbler to idler) (for non-reversing models Only) 5L-680 V-Belt (tumbler to idler) (for reversing models Only) Rotational Sensor Assembly As required. 450578-2 Telephone: (508) 678-9000 / www.amdry.com 21 Non-Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly 22 American Dryer Corporation 450578-2 Non-Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 * Part No. Qty. 100105 100701 101104 101132 101133 150501 153002 153001 100065 1 1 1 1 1 4 4 4 1 100066 122701 122801 137030 152004 153002 153001 117600 154000 800908 803938* 1 8 1 1 4 4 4 4 4 1 1 803813 1 803809* 1 803810* 1 153050 100604 100702 153050 152006 2 1 1 2 2 Description 4L-520 V-Belt (to idler motor) 3/16” x 3/16” x 1” Key (for use on 3Ø - 60 Hz Only) 1/2” x 2” Motor Pulley (for use on 1Ø - 60 Hz Only) 5/8” x 2” Motor Pulley (for use on 3Ø - 60 Hz Only) 5/8” x 2-1/4” Motor Pulley (for use on 50 Hz Only) 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 1/2 HP 120-230v 1Ø 60 Hz 100v-50 Hz Totally Enclosed, Fan-Cooled Motor with Plug 1/2 HP 240v 1Ø 50 Hz Totally Enclosed, Fan-Cooled Motor with Plug Socket Terminal Only Pin/Socket Extraction Tool 8-Pin Housing Connector 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer Noise Suppressor Tape (sold by the foot) 5/16-18 Tinnerman Nut Non-Reversing Motor Mount Only (56Z frame) 1/2 HP 120-230v 1Ø 50/60 Hz Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete with Plug Motor (includes illus. nos. 3 through 7 and 13 through 20) 1/2 HP 240v 1Ø 50 Hz Non-Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete with Plug Motor (includes illus. nos. 3 through 7 and 13 through 20) 1/2 HP 208/230/380/460v 3Ø 60 Hz Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 20) 1/2 HP 208/230/380/460v 3Ø 50 Hz Non-Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 20) 1/2” S.A.E. Flat Washer 12-1/2” Impellor with 1/2” Bore 1/8” x 1/8” x 1-1/2” Key 1/2” S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut Specify voltage when ordering. 450578-2 Telephone: (508) 678-9000 / www.amdry.com 23 Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly 24 American Dryer Corporation 450578-2 Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly Illus. No. 1 2 3 Qty. 4 5* 6 7 8 9* 100112 100701 101132 101133 120200 181003 150501 153002 153001 100007 1 1 1 1 1 1 4 4 4 1 10 11 12 13 14 15 16 17 18 120200 150501 153002 153001 154000 152004 153002 153001 850070 1 4 4 4 8 4 4 4 1 803802* 1 803803* 1 117604 153050 100702 100604 153050 152006 4 2 1 1 2 2 19 20 21 22 23 24 * Part No. Description 4L-610 V-Belt (to idler motor) 3/16” x 3/16” x 1” Key 5/8” x 2” Motor Pulley (for 60 Hz models Only) 5/8” x 2-1/4” Motor Pulley (for 50 Hz models Only) 3/8” x 90º Connector 1/2 HP 208/230/380/460v 3ø 50/60 Hz Motor (56 Hz frame) 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled Motor (56 Hz frame) 3/8” x 90º Connector 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 5/16” Tinnerman Nut 5/16” Hex Nut 5/16” Lock Washer 5/16” Flat Washer Reversing Motor Mount Only (56Z frame) (includes illus. nos. 18 and 19) Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete For 60 Hz Models Only (includes illus. nos. 2 through 14 and 18 through 24) Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete For 50 Hz Models Only (includes illus. nos. 2 through 14 and 18 through 24) Neoprene Sponge Tape (sold by the foot) 1/2” S.A.E. Flat Washer 1/8” x 1/8” x 1-1/2” Key 12-1/2” Impellor with 1/2” Bore 1/2” S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut Specify voltage when ordering. 450578-2 Telephone: (508) 678-9000 / www.amdry.com 25 Sensor Bracket Assemblies 26 American Dryer Corporation 450578-2 Sensor Bracket Assemblies Illus. No. Part No. Qty. 1 880251 1 2 3 4 5 6 130301 153010 152000 121028 122701 112801 122605 154007 150005 824051 1 2 2 2 4 1 1 2 2 1 11 12 13 14 15 16 17 18 19 20 21 22 23 24 322062 122604 122700 150301 150005 130111 130100 130301 130101 153010 152000 882535 121028 122701 122605 882534 1 1 4 2 5 1 1 1 1 5 5 1 4 4 1 1 25 882536 1 322062 122604 122700 122801 150301 1 7 8 9 10 26 27 28 450578-2 4 1 2 Description 1/4” Temperature Sensor Probe Assembly (includes illus. nos. 1 and 5 through 8) 225° Manual Reset Thermostat #6 Star Washer #6-32 Hex Nut Insulated Female Terminal Socket Terminal Only Pin/Socket Extraction Tool 4-Pin Socket Connector Only 1/4” Tinnerman Push On Fastener #6-32 x 1/4” Phillips Round Head Machine Screw Microprocessor Sensor Bracket Assembly Complete (includes illus. nos. 1 through 10) Universal Sensor Bracket Only 4-Pin Connector Only Pin Terminal Only #8-18 x 7/16” Phillips Pan Head TEK Screw #6-32 x 1/4” Phillips Round Head Machine Screw 130° Large Thermostat 150° Large Thermostat 225° Manual Reset Thermostat 180° Large Thermostat #6 Star Washer #6-32 Hex Nut Sensor Jumper Only Insulated Female Terminal Socket Terminal Only 4-Pin Socket Connector Only Sensor Bracket Harness Assembly (includes illus. nos. 22, 23, and 24) Non-Computer Sensor Bracket Assembly Complete (includes thermostats) (includes illus. nos. 14 through 25) Universal Sensor Bracket Only 4-Pin Connector Only Pin Terminal Only Pin/Socket Extraction Tool #8-18 x 7/16” Phillips Pan Head TEK Screw Telephone: (508) 678-9000 / www.amdry.com 27 Gas Burner Assembly 28 American Dryer Corporation 450578-2 Gas Burner Assembly Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 Part No. Qty. 150301 128920 128921 150309 141105 150108 130201 151001 140820* 140804* 141230 318700 150300 128933 883255 141314 142809 850896 817066** 817067** 882390* 880603*** 150001 128975 810029 1 1 1 7 2 2 1 2 2 2 1 3 7 1 1 1 1 1 1 1 1 1 2 1 1 817091 1 151000 154004 142935 802799 150303 122200 105500 319202 154002 319704 4 1 1 1 2 1 1 1 1 1 Description #8-18 x 7/16” Phillips Pan Head TEK Screw Hot Surface Ignitor 24V 2-1/2” Long Hot Surface Ignition Flame Sensor #10-16 x 1/2” Hex Head TEK Crimptite Screw Large Tube Burner #8-32 x 1/2” Pan Head Machine Screw 330º Hi-Limit with Manual Reset #8-32 Pal Nut #29 Orifice (natural gas) #48 Orifice (liquid propane gas) 1/2” Direct Spark Ignition Manifold (2-port) Pipe Bracket (bent) #10-16 x 1/2” Hex Washer TEK Screw CE Gas Valve CE 1/2” Liquid Propane Gas Valve 90º x 1/2” x 1-1/2” Gas Shutoff Assembly 1/2” x 29-1/8” Pipe Hot Surface Ignition Burner Box Only Hot Surface Ignition Burner Assembly (natural gas) Hot Surface Ignition Burner Assembly (liquid propane gas) Euro-14 Liquid Propane Conversion Kit Steam to Gas Interface Plate Round Head Machine Screw CE Hot Surface Ignition Module Hot Surface Ignition Module Mounting Bracket Assembly (for models mfd. as of January 11, 2002) Hot Surface Ignition Module Mounting Bracket Assembly (for models mfd. prior to January 11, 2002) #6-32 Pal Nut Twin Speed Nut 1/2” BSPT x 1/2” N.P.T. Transition Coupling Sail Switch Top and Switch Bracket #4 x 3/4” Pan Head “A” Machine Screw SPST Sail Switch Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push On Fastener Hi-Limit Mounting Bracket * Consult factory for elevations over 2,000 feet. ** Burner orifices are not included and must be ordered separately. *** Needed when converting steam heat to gas heat. 450578-2 Telephone: (508) 678-9000 / www.amdry.com 29 Electric Oven Assembly 30 American Dryer Corporation 450578-2 Electric Oven Assembly Illus. No. Part No. Qty. 1* 803007 ----------------150300 802800 802801 1 1 2 1 1 154004 150300 802799 122200 150303 105500 319202 154002 150300 803100 320611 150301 130400 150300 154001 121010 152014 --------* --------* 120081 120080 152008 121011 --------* 153009 321301 150402 882603** 1 2 1 1 2 1 1 1 2 1 1 3 1 2 1 1 3 1 1 1 1 1 2* 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 -- Description Large Electric Oven Box Only Electric Oven Assembly Complete Electric Element #10-16 x 1/2” Hex Washer TEK Screw Sail Switch Box with Bracket and Cover Only Sail Switch Box Assembly Complete (includes illus. nos. 4 through 12) Twin Speed Nut #10-16 x 1/2” Hex Washer TEK Screw Sail Switch Box Cover and Bracket Only Sail Switch Only #4 x 3/4” Pan Head “A” Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push On Fastener #10-16 x 1/2” Hex Washer TEK Screw Electric Oven Front Cover Only Large Relay Box Cover Only #8-18 x 7/16 Phillips Pan Head TEK Screw 290º Hi-Limit Thermostat #10-16 x 1/2” Hex Washer TEK Screw #10-24 Speed Nut L-70 Ground Lug 1/4-20 Free Spin Wash Nut Oven Relay Oven Relay Replacement Coil Internal Ceramic Insulator (2 per element) External Ceramic Insulator (2 per element) #10-32 Hex Nut (4 per element) Bus Bar (sold by the foot) Oven Wire with Crimp Lug #10 Star Washer (2 per element) Large Electric Oven Right Side Cover Only #10-24 x 5/8” Truss Head Machine Screw Steam to Electric Transition Plate * Refer to Electrical Oven Component Application Chart on page 42. ** Not illustrated...needed to convert dryer from steam to electric. 450578-2 Telephone: (508) 678-9000 / www.amdry.com 31 Single-Phase (1ø) Motor, Electric Relay Panel Assembly Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 * 32 Part No. Qty. 151000 150300 150008 120716 322817 818073 2 2 2 1 1 1 818044 --------* 1 1 --------* 818075 --------* 136008 136049 136057 150301 150297 152004 121010 153002 132459 121300 1 1 1 1 or 2 1 2 1 1 1 1 1 1 3 Description #6-32 Pal Nut #10-16 x 1/2” Hex Washer TEK Screw #6-32 x 1-1/4” Phillips Pan Head Machine Screw 2-Position Terminal Block Rear Electric Mounting Plate Only Rear Electric Panel Assembly Complete - 120 Volt (includes illus. nos. 1 through 14) Rear Electric Panel Wiring (120 Volt Only)...Not Illustrated Rear Electric Panel Assembly Complete - 208-240 Volt (includes illus. nos. 1 through 14) Rear Electric Panel Wiring (208-240 Volt Only)...Not Illustrated Transformer Assembly - 120 Volt Transformer Assembly - 208-240 Volt Fuse Holder Only 3/4-Amp (Slo-Blo) Fuse Only - 120 Volt 1/2-Amp (Slo-Blo) Fuse Only - 208-240 Volt #8-18 x 7/16” Phillips Pan Head TEK Screw #10 x 1/2” Hex Washer TEK Screw (green) 5/16-18 Hex Nut L-70 Ground Lug 5/16” Lock Washer 3-Pole Contactor Open/Closed Bushing Not available at time of printing (contact factory for further information). American Dryer Corporation 450578-2 3-Phase (3ø) Motor, Electric Relay Panel Assembly Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 * Part No. Qty. 151000 150300 150008 120716 322817 818074 2 2 2 1 1 1 818072 818069 1 1 818070 --------* 1 1 --------* 818036 818037 136008 136057 150301 150297 152004 121010 153002 132459 121300 1 1 1 2 2 2 1 1 1 1 1 3 Description #6-32 Pal Nut #10-16 x 1/2” Hex Washer TEK Screw #6-32 x 1-1/4” Phillips Pan Head Machine Screw 2-Position Terminal Block Rear Electric Mounting Plate Only Rear Electric Panel Assembly Complete - 208-240 Volt (includes illus. nos. 1 through 14) Rear Electric Panel Wiring 208-240 Volt...Not Illustrated Rear Electric Panel Assembly 380-416 Volt 3ø (includes illus. nos. 1 through 14) Rear Electric Panel Wiring 380-416 Volt 3ø...Not Illustrated Rear Electric Panel Assembly 380-416 Volt 3ø w 1ø Motor (includes illus. nos. 1 through 14) Rear Electric Panel 380-416 Volt 3ø w 1ø Motor...Not Illustrated Transformer Assembly - 208-240 Volt Transformer Assembly - 380-416 Volt Fuse Holder Only 1/2-Amp (Slo-Blo) Fuse Only #8-18 x 7/16” Phillips Pan Head TEK Screw #10 x 1/2” Hex Washer TEK Screw (green) 5/16-18 Hex Nut L-70 Ground Lug 5/16” Lock Washer 3-Pole Contactor Open/Closed Bushing Not available at time of printing (contact factory for further information). 450578-2 Telephone: (508) 678-9000 / www.amdry.com 33 Reversing Electric Relay Panel Assembly 34 American Dryer Corporation 450578-2 Reversing Electric Relay Panel Assembly Illus. No. Part No. Qty. 1 2 3 4 5 150300 150008 120701 132458 818036 818037 136008 136057 150301 150297 152004 121010 153002 132459 322812 --------* 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 --------* 819068 819044 151000 120765 1 1 1 2 1 6 7 8 9 10 11 12 13 14 15 16 * Description #10-16 x 1/2” Hex Washer TEK Screw #6-32 x 1-1/4” Phillips Pan Head Machine Screw 4-Position Terminal Block 3-Pole Reversing Contactor Transformer Assembly - 208-240 Volt Transformer Assembly - 380-416 Volt Fuse Holder Only 1/2-Amp (Slo-Blo) Fuse Only - 208-240 Volt #8-18 x 7/16” Phillips Pan Head TEK Screw #10 x 1/2” Hex Washer TEK Screw (green) 5/16-18 Hex Nut L-70 Ground Lug 5/16” Lock Washer 3-Pole Contactor Rear Electric Mounting Plate Only Rear Electric Panel Assembly Complete - 208-240 Volt (includes illus. nos. 1 through 14) Rear Electric Panel Wiring 208-240 Volt...Not Illustrated Rear Electric Panel Assembly Complete 380-416 Volt Rear Electric Panel Wiring (380-416 Volt Only)...Not Illustrated #6-32 Pal Nut Standard End Bracket Not available at time of printing (contact factory for further information). 450578-2 Telephone: (508) 678-9000 / www.amdry.com 35 Steam Coil/Air Operated Steam Damper Assembly 36 American Dryer Corporation 450578-2 Steam Coil/Air Operated Steam Damper Assembly Illus. No. Part No. Qty. 1 2 3 4 5 6 7 165008 153002 152004 152002 153007 820321 803416 1 6 6 4 4 2 1 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 153007 152002 115995 102350 151006 152051 100495 323365 152002 153007 100472 143110 100472 100496 143238 100498 150002 153010 152000 330987 152002 153007 100520 4 4 60 1 1 1 1 2 2 2 1 1 1 1 1 1 2 2 2 1 2 2 1 450578-2 Description Steam Coil Assembly 5/16” Lock Washer 5/16-18 Hex Nut 1/4-20 Hex Nut 1/4” Lock Washer Steam Damper Hinge Assembly Steam Damper Assembly (includes illus. nos. 7, 10, and 11) 1/4” Lock Washer 1/4-20 Hex Nut Steam Damper Gasket (sold by the inch) Steam Damper Foam (68-1/2” length) 5/16-24 Stainless Steel Acorn Nut 5/16-24 Right Hand Jam Nut 11/16” Dia. x 3” Stroke Piston Left and Right Piston Support 1/4-20 Hex Nut 1/4” Lock Washer 1/4” x 1/8” Connector 1/4” Tubing (sold by the foot) 1/4” x 1/8” Connector 1/8” Needle Valve 1/8” Close Nipple 3-Way Micro Valve - 24 VAC #6-32 x 1” Slotted Machine Screw #6 Star Washer #6-32 Hex Nut Micro Valve Support Bracket 1/4-20 Hex Nut 1/4” Lock Washer 1/8” N.P.T. Silencer (muffler) Telephone: (508) 678-9000 / www.amdry.com 37 Steam Coil/Mechanical Steam Damper Assembly 38 American Dryer Corporation 450578-2 Steam Coil/Mechanical Steam Damper Assembly Illus. No. * Part No. Qty. 1 2 3 4 5 6 7 165008 153002 152004 152002 153007 820321 880780 1 6 6 4 4 2 1 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 115995 102350 309300 154300 153022 104052 150110 153012 312315 153022 154300 850268 150110 153012 312315 104054 100511 122120 150026 122120 150026 153012 150102 --------* 60 1 1 1 1 1 2 2 1 1 1 1 2 2 1 1 1 1 2 1 2 2 2 1 Description ADS-30 Steam Coil Assembly 5/16” Lock Washer 5/16-18 Hex Nut 1/4-20 Hex Nut 1/4” Lock Washer Steam Damper Hinge Assembly Steam Damper Assembly (includes illus. nos. 7, 10, and 11) Steam Damper Gasket (sold by the inch) Steam Damper Foam (68-1/2” length) Rod Bracket 1/2” x 3/32” Cotter Pin #10 Steel Burr Mechanical Steam Damper Actuator Rod #8-32 x 1/4” Phillips Head Machine Screw #8 Star Washer Mechanical Steam Damper Motor Mount #10 Steel Burr 1/2” x 3/32” Cotter Pin Mechanical Steam Damper Arm #8-32 x 1/4” Phillips Head Machine Screw #8 Star Washer Mechanical Steam Damper Motor Mount Mechanical Steam Damper Motor Mechanical Steam Damper Switch Plate Mechanical Steam Damper Switch #4-40 x 5/8” Phillips Pan Head Machine Screw Mechanical Steam Damper Switch #4-40 x 5/8” Phillips Pan Head Machine Screw #8 Star Washer #8-32 x 3/8” Pan Head Machine Screw Mechanical Steam Damper Motor Cam The mechanical steam damper motor cam is part of the mechanical steam damper motor. 450578-2 Telephone: (508) 678-9000 / www.amdry.com 39 Outer Top/Back Guard Assemblies Illus. No. 1 2 3* 4 5 6* 7 8 9 10 * 40 Part No. Qty. 322809 150301 314424 314422 150301 150300 322015 322082 1 4 1 1 7 10 1 1 322018 1 150301 103500 882099 13 4 1 Description Back Electrical Box Cover #8-18 x 7/16” Phillips Pan Head TEK Screw Gas Top Back Guard Electric Top Back Guard #8-18 x 7/16” Phillips Pan Head TEK Screw #10-16 x 1/2” Hex Washer TEK Screw Outer Top Bottom Back Guard (for models mfd. as of March 19, 2001) Bottom Back Guard (for models mfd. prior to March 19, 2001) #8-18 x 7/16” Phillips Pan Head TEK Screw Leveling Leg 8” to 10” Transition Piece (for models mfd. prior to March 19, 2001) There is no outer top or top back guard on steam models. American Dryer Corporation 450578-2 Microprocessor Coin Acceptors Listing NOTE: Coin acceptors listed include optical switch. Replacement optic switch for Hanke acceptors is Part No. 881143. Replacement optic switch for Greenwald acceptors is Part No. 137056. Single Coin* ADC Part No. Nation 882689 United States 125100 U.S. and Canada 125107 881768 881604 125103 125121 125133 Australia Australia Japan ----Hong Kong Description 25¢ Hanke Optic Coin Acceptor (for models mfd. as of June 15, 2000) 25¢ Greenwald Optic Coin Acceptor (for models mfd. prior to June 15, 2000) 20¢ Greenwald Australian Optic Coin Acceptor $1 Hanke Australian Optic Coin Acceptor 100 Yen Hanke Optic Coin Acceptor 0.882 Token Greenwald Optic Coin Acceptor 0.800 Token Greenwald Optic Coin Acceptor $1 Greenwald Hong Kong Optic Coin Acceptor Dual Coin* 881508 881842 881542 881846 881541 * U.S. and Canada Canada United Kingdom France Netherlands 10¢/25¢ Hanke Dual Optic Coin Acceptor 25¢/$1 Hanke Dual Optic Coin Acceptor 1£/20 Pence Hanke Dual Optic Coin Acceptor 2/5 Franc Hanke Dual Optic Coin Acceptor 25¢/1 Guilder Hanke Dual Optic Coin Acceptor Consult factory for coin acceptors not listed. 450578-2 Telephone: (508) 678-9000 / www.amdry.com 41 42 American Dryer Corporation 460/480 416 240 240 208 208 380 18 18 18 18 18 18 15 3Ø 1Ø 3Ø 1Ø 3Ø 3Ø 3Ø 1Ø 1Ø 3Ø 3Ø 3Ø 3Ø 3Ø Phase 3 or 4 2 3 or 4 2 3 3 or 4 3 or 4 2 2 3 or 4 3 or 4 3 3 or 4 3 or 4 Wire 824937 824903 824914 824925 824931 824944 824950 824905 824927 824938 824915 824932 824945 824951 6 6 6 6 6 6 6 5 5 6 6 6 6 6 3 3 3 3 3 3 3 4 4 4 4 4 4 4 120006 120006 120006 120007 120007 120006 120007 120008 120009 120008 120008 120009 120008 120009 1 1 1 1 1 1 1 1 1 1 1 1 1 1 #8 #4 #6 #4 #8 #8 #8 #2 #4 #8 #4 #6 #8 #8 882559 882553 882556 882552 882558 882559 882559 882562 882552 882559 882553 882556 882558 882559 Element Oven Wire Oven Assembly* Qty. Kw Part No. Qty. Size Part No. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Qty. 121010 121012 121010 121012 121010 121010 121010 121012 121012 121010 121012 121010 121010 121010 Part No. Terminal Lug 2 2 2 2 2 2 2 2 2 2 1 1 2 2 Bus Bar P/N: 121011 DPA33 DPA73 DF35 DPA73 DPA43 DPA33 DPA33 GE35 DPA73 DPA33 DPA63 DF35 DPA33 DPA33 Cat. No. 131352 131376 131361 131376 131357 131352 131352 131385 131376 131352 131369 131361 131352 131352 Part No. Oven Relay N/A N/A N/A N/A N/A N/A N/A 131386 N/A N/A N/A N/A N/A N/A Relay Coil Part No. N/A = Not available. * Oven assemblies DO NOT include oven relay (contactor). This item must be ordered separately. When ordering oven assembly complete, specify 3 or 4 wire when applicable as well as if dryer has microprocessor controls. 208 20 208 24 240 240 24 20 416 24 380 460/480 24 20 Voltage Kw Electrical Oven Component Application Chart 450578-2 Additional Parts Available Part No. Description 114006 112280 114001 112533 112284 120100 120300 120400 120500 120600 120707 120708 120800 120802 120902 120903 121014 121026 121499 121500 122804 404500 404502 404506 404507 404513 “WARNING - Fire Hazards” Label “Clean Lint Screen” Label “CAUTION - Exhaust/Lint Screen” Label “Phase 5 Coin Program Location Summary” Label “Phase 6 Non-Coin Program Location Summary” Label 3/8” Straight (BX) Connector 3/8” x 45º (BX) Connector 3/8” Red Jacket (BX) Insulator 3/8” Jiffy Clip (BX retainer clip) 3/8” Greenfield (BX) (2-position) Terminal Strip (3-position) Terminal Strip 1/4” In-Line Connector Red Butt Connector #74B Wire Nut Crimp-On Wire Nut 1/4” Insulated (female) Terminal Tab Receptacle Combination 5-1/2” Harness Tie 8” Harness Tie Manometer (hydro gauge) for Measuring Gas Pressure Almond Brush-In-Cap Bottle Touch-Up Paint White Brush-In-Cap Bottle Touch-Up Paint Beige Brush-In-Cap Bottle Touch-Up Paint Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint Wrinkle Blue Brush-In-Cap Bottle Touch-Up Paint 450578-2 Telephone: (508) 678-9000 / www.amdry.com 43 ADC 450578 2 - 02/18/05-0