Download American Dryer Corp. Dyer AD-295 User's Manual

AD-26 / AD-295
Par ts Manual
24 VAC Phase 5
1992 thru 1998
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: [email protected]
www.amdry.com
ADC Part No. 450122
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this
product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation.
ONLY properly licensed technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation/operator's
manual included with the dryer.
WARNING: UNDER NO CIRCUMSTANCES should the door switch or the heat circuit
devices ever be disabled.
WARNING: The dryer must never be operated with any of the back guards, outer tops, or
service panels removed. PERSONAL INJURY or FIRE COULD RESULT.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the
right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material,
and to change or discontinue models.
Important
For your convenience, log the following information:
DATE OF PURCHASE
DISTRIBUTORS NAME
Serial Number(s)
________________________________________ MODEL NO. _______________________________
__________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Replacement parts can be obtained from your distributor or the ADC factory. When ordering replacement parts
from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your orders directly to the
ADC Parts Department at (508) 678-9010. Please specify the dryer model number and serial number in
addition to the description and part number, so that your order is processed accurately and promptly.The
illustrations on the following pages may not depict your particular dryer exactly.
The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts
thoroughly before ordering.
INSTRUCTIONS TO BE FOLLOWED IN THE EVENT THE USER
SMELLS GAS MUST BE POSTED IN A PROMINENT LOCATION. THE
INSTRUCTIONS TO BE POSTED SHALL BE OBTAINED FROM THE
LOCAL GAS SUPPLIER.
Table of Contents
Coin Control Door Assembly For Models Mfd. as of March 21, 1997 ................................................. 2
Coin Control Door Assembly For Models Mfd. prior to March 21, 1997 .............................................. 3
Non-Coin Control Door Assembly For Models Mfd. as of March 21, 1997 .......................................... 4
Non-Coin Control Door Assembly For Models Mfd. prior to March 21, 1997 ....................................... 5
Dual Timer Control Door Assembly For Models Mfd. as of March 21, 1997 ....................................... 6
Dual Timer Control Door Assembly For Models Mfs. prior to March 21, 1997 .................................... 7
Single Coin Microprocessor Control Panel Assembly For Models Mfd. as of April 11, 1996 ............... 8
Single Coin Microprocessor Control Panel Assembly for Single Coin 25¢ Models Only .................... 9
Dual Coin Microprocessor Control Panel Assembly ......................................................................... 10
Non-Coin Microprocessor Control Panel Assembly .......................................................................... 11
Microprocessor Control Box Assembly ............................................................................................. 12
25¢ Coin Acceptor Listing ................................................................................................................. 13
Dual Coin Acceptor Component Listing for Export Models Only ................................................. 14, 15
Dual Timer Control Panel Assembly ................................................................................................. 16
Non-Microprocessor Coin Control Panel Assembly .......................................................................... 17
Non-Microprocessor Control Box Assembly ..................................................................................... 18
Main Door Assembly ......................................................................................................................... 19
Main Door Switch Assembly ............................................................................................................. 20
Coin Vault Assembly ......................................................................................................................... 21
Coin Front Panel Assembly ............................................................................................................... 22
Non-Coin Front Panel Assembly ....................................................................................................... 23
Lint Door Assembly ........................................................................................................................... 24
Lint Basket / Lint Switch Assemblies ................................................................................................ 25
AD-26 Tumbler / Support Assemblies For Models Mfd. as of August 17, 1998 ................................. 26
AD-26 Tumbler / Support Assemblies For Models Mfd prior to August 17, 1998 .............................. 27
AD-295 Tumbler / Support Assemblies For Models Mfd. as of November 2, 1998 ........................... 28
AD-295 Tumbler / Support Assemblies For Models Mfd. prior to November 2, 1998 ........................ 29
Tumbler Brush Assembly .................................................................................................................. 30
Microprocessor Temperature Sensor Bracket Assembly ................................................................. 31
Non-Microprocessor Temperature Sensor Bracket Assembly .......................................................... 32
Sail Switch Assembly ........................................................................................................................ 33
Tumbler Bearing Assembly ......................................................................................................... 34, 35
Totally Enclosed, Non-Vent Motor / Idler Assemblies ................................................................... 36, 37
Upshot Burner Assembly ............................................................................................................ 38, 39
Back Guard Assembly....................................................................................................................... 40
12-Rib 120" (J) Poly Belt Arrangement ............................................................................................. 41
Upshot Burner Assembly Specifications ........................................................................................... 42
Additional Parts Available .................................................................................................................. 43
AD-26/AD-295 Coin Control Door Assembly
For Models Mfd. as of March 21, 1997
Illus. No.
1
Part No.
Qty.
881585
1
881583
1
3
4
112350
870011
160040
160140
1
1
2
-
5
6
7
180315
150310
150300
1
5
4
2
Description
AD-26/AD-295 Coin Control Door with Trim Less Locks
(includes illus. nos. 1, 5, and 6)
AD-26/AD-295 Stainless Steel Coin Control Door with Trim Less Locks
(includes illus. nos. 1, 5, and 6)
ADC Logo Only
Logo Double Stick Tape Kit
ACE® Lock Assembly Only
ACE® Key Only
(key number XX4451)
AD-26/AD-295 Lower Control Door Trim
#8 x 1/2" Phillips Pan Head "A" Screw
#10 x 1/2” Hex Washer TEK Screw
* Specify color when ordering.
2
American Dryer Corporation
450122-6
Coin Control Door Assembly
For Models Mfd. prior to March 21, 1997
Illus. No.
1
Part No.
Qty.
880236
1
3
4
850414
112350
870011
160040
160140
1
1
1
1
-
5
6
180315
150310
1
5
2
Description
AD-26/AD-295 Coin Control Door with Trim Less Locks
(includes illus. nos. 1, 5, and 6)
AD-26/AD-295 Coin Control D
ADC Logo Only
Logo Double Stick Tape Kit
ACE® Lock Assembly Only
ACE® Key Only
(key number XX4451)
AD-26/AD-295 Lower Control Door Trim
#8 x 1/2" Phillips Pan Head "A" Screw
* Specify color when ordering.
450122-6
Telephone: (508) 678-9000 / www.amdry.com
3
Non-Coin Control Door Assembly
For Models Mfd. as of March 21, 1997
Illus. No.
Part No.
Qty.
1
881586
1
2
3
4
112350
870011
160040
160140
1
1
2
-
5
6
7
180315
150310
150300
1
5
4
Description
AD-26/AD-295 Non-Coin Control Door with Trim Less Locks
(includes illus. nos. 1, 5, and 6)
ADC Logo Only
Logo Double Stick Tape Kit
ACE® Lock Assembly Only
ACE® Key Only
(key number XX4451)
AD-26/AD-295 Lower Control Door Trim
#8 x 1/2" Phillips Pan Head "A" Screw
#10 x 1/2” Hex Washer TEK Screw
* Specify color when ordering.
4
American Dryer Corporation
450122-6
Non-Coin Control Door Assembly
For Models Mfd. prior to March 21, 1997
Illus. No.
Part No.
Qty.
1
880918*
1
3
4
880917*
112350
870011
160040
160140
1
1
1
1
-
5
6
180315
150310
1
5
2
Description
AD-26/AD-295 Non-Coin Control Door with Trim Less Locks
(includes illus. nos. 1, 5, and 6)
AD-26/AD-295 Non-Coin Control Door Only
ADC Logo Only
Logo Double Stick Tape Kit
ACE® Lock Assembly Only
ACE® Key Only
(key number XX4451)
AD-26/AD-295 Lower Control Door Trim
#8 x 1/2" Phillips Pan Head "A" Screw
* Specify color when ordering.
450122-6
Telephone: (508) 678-9000 / www.amdry.com
5
Dual Timer Control Door Assembly
For Models Mfd. as of March 21, 1997
Illus. No.
6
Part No.
Qty.
1
881596
1
2
3
4
112350
870011
160040
160140
1
1
2
-
5
6
7
180315
150310
150300
1
5
4
Description
AD-26/AD-295 Coin Control Door with Trim Less Locks
(includes illus. nos. 1, 5, and 6)
ADC Logo Only
Logo Double Stick Tape Kit
ACE® Lock Assembly Only
ACE® Key Only
(key number XX4451)
AD-26/AD-295 Lower Control Door Trim
#8 x 1/2" Phillips Pan Head "A" Screw
Hex Washer TEK Screw
American Dryer Corporation
450122-6
Dual Timer Control Door Assembly
For Models Mfd. prior to March 21, 1997
Illus. No.
Part No.
Qty.
1
880773*
1
3
4
850415*
112350
870011
160040
160140
1
1
1
1
-
5
6
180315
150310
1
5
2
Description
AD-26/AD-295 Coin Control Door with Trim Less Locks
(includes illus. nos. 1, 5, and 6)
AD-26/AD-295 Coin Control Door Only
ADC Logo Only
Logo Double Stick Tape Kit
ACE® Lock Assembly Only
ACE® Key Only
(key number XX4451)
AD-26/AD-295 Lower Control Door Trim
#8 x 1/2" Phillips Pan Head "A" Screw
* Specify color when ordering.
450122-6
Telephone: (508) 678-9000 / www.amdry.com
7
Single Coin Microprocessor Control Panel Assembly
For Models Mfd. as of April 11, 1996
Illus. No.
1
2
8
Part No.
Qty.
3
4
5
6
112568
881163
881450
881451
150150
881143
150415
883353
1
1
1
1
1
1
1
1
7
8
9
10
883352
137216
152102
153010
150005
1
1
4
2
2
Description
Single Coin Keyboard for Hanke Acceptor
25¢ Hanke Coin Acceptor with Optic
25¢ Canadian Coin Acceptor with Optic
0.880 Token Hanke Coin Acceptor with Optic
2.5 mm x 10 mm Stainless Steel Phillips Screw
Hanke Optic Switch
#10-16 x 1/2” Phillips Screw
Control Panel Assembly Complete Less Acceptor
(includes illus. nos. 1 and 5 through 10)
Control Panel Only
Phase 5 Coin Board
M-3 Metric Hex Nut
#6 Star Washer
#6-32 x 1/4” Phillips Round Head Machine Screw
American Dryer Corporation
450122-6
Single Coin Microprocessor Control Panel Assembly
For Single Coin 25¢ Models Only
Illus. No.
1
2
Part No.
Qty.
112560
880887
1
1
4
5
6
880888
137216
824998
153010
150005
--------
1
1
1
2
2
1
7
8
137056
150309
1
1
3
Description
AD-26/AD-295 Single Coin Keypad Label Only
AD-26/AD-295 Single Coin Panel Control less Acceptor - 24 VAC
(includes illus. nos. 1 through 5)
AD-26/AD-295 Control Panel Only
AD-26/AD-295 Phase 5 Microprocessor Controller Only
Phase 5 Battery Clip Only
#6 Star Washer
#6-32 x 1/4" Phillips Round Head Machine Screw
25¢ Coin Acceptor Only
(refer to 25¢Coin Acceptor Component Listing on page 13)
Optical Switch Only
#10-16 x 1/2" HH TEK Crimptite Screw
NOTE: Contact factory for export models.
450122-6
Telephone: (508) 678-9000 / www.amdry.com
9
Dual Coin Microprocessor Control Panel Assembly
For Export Models Only
Illus. No.
1
2
Part No.
Qty.
112560
880906
1
1
4
5
6
880904
137216
824998
153010
150005
--------
1
1
1
2
2
1
7
8
137056
150309
2
1
3
Description
AD-26/AD-295 Dual Coin Keypad Label Only
AD-26/AD-295 Dual Coin Panel Control less Acceptor - 24 VAC
(includes illus. nos. 1 through 5)
AD-26/AD-295 Dual Coin Control Panel Only
AD-26/AD-295 Phase 5 Control Microprocessor Only
Phase 5 Battery Clip Only
#6 Star Washer
#6-32 x 1/4" Phillips Round Head Machine Screw
Dual Coin Acceptor Only
(refer to Dual Coin Acceptor Component Listing on
page 14and page 15)
Optical Switch Only
#10-16 x 1/2" HH TEK Crimptite Screw
NOTE: Contact factory for export models.
10
American Dryer Corporation
450122-6
Non-Coin Microprocessor Control Panel Assembly
Illus. No.
1
2
3
4
5
450122-6
Part No.
Qty.
112560
880905
1
1
880916
137216
824998
153010
150005
1
1
1
2
2
Description
AD-26/AD-295 Dual Coin Twin-Keypad Label Only
AD-26/AD-295 Non-Coin Control Panel Assembly Complete - 24 VAC
(includes illus. nos. 1 through 5)
AD-26 /AD-295 Non-Coin Control Panel Only
Phase 5 Non-Coin Computer Board Only
Phase 5 Battery Clip Only
#6 Star Washer
#6-32 x 1/4" Phillips Round Head Machine Screw
Telephone: (508) 678-9000 / www.amdry.com
11
Microprocessor Control Box Assembly
Illus. No.
1
2
3
4
5
6
7**
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Part No.
150103
141403
151001
151000
136008
150002
136057
150002
120715
151000
122626
122705
122704
122625
137025
122631
122705
122704
122630
137025
150309
121010
132475
824828
150103
151001
Qty.
2
1
2
*
*
*
*
2
1
2
1
11
11
1
1
1
3
3
1
1
1
1
1
1
4
4
Description
#8-32 x 3/4" Phillips Round Head Machine Screw
24 VAC Transformer Only
#8-32 Pal Nut
#6-32 Pal Nut
3-Position Fuse Block
#6-32 x 1" Phillips Round Head Machine Screw
1/2-Amp (Slo Blo) Fuse Only
#6-32 x 1" Phillips Round Head Machine Screw
30-Position Terminal Block
#6-32 Pal Nut
15-Pin Socket Connector Only
Socket Terminal Only
Pin Terminal Only
15-Pin Socket Connector Only
6/15 Position Starin Relief ... Not Illustrated
6-Pin Socket Connector Only
Socket Terminal Only
Pin Terminal Only
6-Pin Connector Only
6/15 Position Starin Relief ... Not Illustrated
#10-16 x 1/2" HH TEK Crimptite Screw
L-70 Ground Lug
2-Pole Contactor
RC Network with Connectors
#8-32 x 3/4" Phillips Round Head Machine Screw
#8-32 Pal Nut
* For 115 VAC application quanityis 1 and for 208/230 VAC application quanity is 2.
** Check fuse rating for verification.
12
American Dryer Corporation
450122-6
25¢ Coin Acceptor Component Listing
Illus. No.
Part No.
Qty.
1
2
3
881930
154320
880800
1
1
1
4
5
6
7
8
9
10
125720
152016
150020
137056
137049
150020
150020
125715
1
2
1
1
1
1
1
1
11
12
13
14
15
125706
125704
125705
125703
150110
1
1
2
1
1
450122-6
Description
AD-26/AD-295 25¢ Coin Acceptor Body Only
#4-40 x 11/16" x 1" U-Bolt Only
AD-26/AD-295 25¢ Coin Acceptor Lower Reject with Bracket Kit
(includes illus. nos. 3 and 15)
AD-26/AD-295 25¢ Coin Acceptor Lower Reject with Bracket Only
#4-40 Hex Nut
#4-40 x 5/16" Slotted Pan Head Machine Screw
Optical Switch Only
Optical Switch Mounting Bracket Only
#4-40 x 5/16" Slotted Pan Head Machine Screw
#4-40 x 5/16" Slotted Pan Head Machine Screw
AD-26/AD-295 25¢ Coin Acceptor Upper Assembly Complete
(includes illus. nos. 10 through 14)
3/16" Coin Acceptor Retaining Ring Only
Coin Acceptor Spring Only
Coin Acceptor Spacer Only
Coin Acceptor Rod Only
#8-32 x 1/4" Binding Head Phillips Machine Screw
Telephone: (508) 678-9000 / www.amdry.com
13
Dual Coin Acceptor Component Listing
For Export Models Only
Illus. No.
1
2
3
4
14
Part No.
Qty.
125726
881931
125738
881923
882054
125731
125737
881926
154320
880801
1
1
1
1
1
1
1
2
2
1
125721
1
1
1
1
1
1
1
Description
$1 Canadian Coin Acceptor Body Only
1 English Pound (1£) Coin Acceptor Body Only
10 Danish Krone (10KR) Coin Acceptor Body Only
1 Dutch Guilder (1G) Coin Acceptor Body Only
25¢ Canadian Coin Acceptor Body Only
5 Belgian Franc (5BF) Coin Acceptor Body Only
5 Danish Krone (5KR) Coin Acceptor Body Only
25¢ Dutch Guilder Coin Acceptor Body Only
#4-40 x 11/16" x 1" U-Bolt
Large Lower Reject with Bracket Kit
(includes illus. nos. 4 and 18)
$1 Canadian Coin Acceptor Lower Assembly Only
50 English Pence (50P) Coin Acceptor Lower Assembly Only
1 English Pound (1£) Coin Acceptor Lower Assembly Only
20 Belgian Franc (20BF) Coin Acceptor Lower Assembly Only
5 French Franc (5 FF) Coin Acceptor Lower Assembly Only
10 Danish Krone (10KR) Coin Acceptor Lower Assembly Only
1 Dutch Guilder (1G) Coin Acceptor Lower Assembly Only
American Dryer Corporation
450122-6
Dual Coin Acceptor Component Listing (continued)
For Export Models Only
Illus. No.
5
6
7
8
9
10
11
12
Part No.
Qty.
880800
1
125720
880801
1
1
1
1
1
152016
150020
137056
137049
150020
150020
125716
4
2
2
2
2
2
1
1
1
1
1
1
1
13
125715
1
1
1
1
125716
1
1
14
15
16
17
18
450122-6
125706
125704
125705
125703
150110
2
2
4
2
2
Description
Small Lower Reject with Bracket Kit
(includes illus. nos. 5 and 18)
25¢ Canadian Coin Acceptor Lower Assembly Only
20 English Pence (20P) Coin Acceptor Lower Assembly Only
5 Belgian Franc (5BF) Coin Acceptor Lower Assembly Only
25¢ Dutch Guilder Coin Acceptor Lower Assembly Only
Large Lower Reject with Bracket Kit
(includes illus. nos. 5 and 18)
#4-40 Hex Nut
#4-40 x 5/16" Slotted Pan Head Machine Screw
Optical Switch Only
Optical Switch Mounting Bracket
#4-40 x 5/16" Slotted Pan Head Machine Screw
#4-40 x 5/16" Slotted Pan Head Machine Screw
$1 Canadian Coin Acceptor Upper Assembly Complete
(includes illus. nos. 12 and 14 through 17)
50 English Pence (50P) Coin Acceptor Upper Assembly Complete
(includes illus. nos. 12 and 14 through 17)
1 English Pound (1£) Coin Acceptor Upper Assembly Complete
(includes illus. nos. 12 and 14 through 17)
20 Belgian Franc (20BF) Coin Acceptor Upper Assembly Complete
(includes illus. nos. 12 and 14 through 17)
5 French Franc (5FF) Coin Acceptor Upper Assembly Complete
(includes illus. nos. 12 and 14 through 17)
10 Danish Krone (10KR) Coin Acceptor Upper Assembly Complete
(includes illus. nos. 12 and 14 through 17)
1 Dutch Guilder (1G) Coin Acceptor Upper Assembly Complete
(includes illus. nos. 12 and 14 through 17)
25¢ Canadian Coin Acceptor Upper Assembly Complete
(includes illus. nos. 13 through 17)
20 English Pence (20P) Coin Acceptor Upper Assembly Complete
(includes illus. nos. 13 through 17)
5 Belgian Franc (5BF) Coin Acceptor Upper Assembly Complete
(includes illus. nos. 13 through 17)
25¢ Dutch Guilder Coin Acceptor Upper Assembly Complete
(includes illus. nos. 13 through 17)
2 French Franc (2FF) Coin Acceptor Upper Assembly Complete
(includes illus. nos. 13 through 17)
5 Danish Krone (5KR) Coin Acceptor Upper Assembly Complete
(includes illus. nos. 13 through 17)
3/16" Coin Acceptor Retainer Ring Only
Coin Acceptor Spring Only
Coin Acceptor Spacer Only
Coin Acceptor Rod Only
#8-32 x 1/4" Binding Head Phillips Machine Screw
Telephone: (508) 678-9000 / www.amdry.com
15
Dual Timer Control Panel Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
--16
Part No.
Qty.
123005
122400
880774
1
1
1
880920
131917
150207
154001
152000
153010
120730
120713
150002
150110
150001
131931
151000
112050
150309
124103
124027
124028
122602
122700
122801
1
1
2
2
2
2
1
1
2
4
2
1
2
1
1
2
1
1
1
8
1
Description
Red Indicator Light - 24 VAC
Rocker Heat Selector Switch - 24 VAC
Dual Timer Control Panel Assembly Complete - 24 VAC
(includes illus. nos. 1 through 21)
AD-26/AD-295 Dual Timer Control Panel Only
Push-to-Start Relay - 24 VAC
#10-24 x 1/2" Round Head Machine Screw
#10-24 Speed Nut
#6-32 Hex Nut
#6 Star Washer
30-Position Terminal Block (for models mfd. as of May 2, 1993)
18-Position Terminal Block (for models mfd. prior to May 2, 1993)
#6-32 x 1" Round Head Machine Screw
#8-32 x 1/4" Phillips Head Machine Screw
#6-32 x 1/2" Round Head Machine Screw
Dual Timer Relay - 24 VAC
#6-32 Pal Nut
Dual Timer Label Only
#10-16 x 1/2" HH TEK Crimptite Screw
Arrow Timer Knob
60-Minute Timer - 24 VAC
15-Minute Timer - 24 VAC
9-Pin Connector Only
Pin Terminal Only
Pin/Socket Extraction Tool
American Dryer Corporation
450122-6
Non-Microprocessor Coin Control Panel Assembly
Illus. No.
Part No.
Qty.
1
2
3
123005
122400
880900
1
1
1
4
5
6
7*
8
9
10
11
12
—
880899
131917
150207
154001
125601
150303
120712
150415
122602
122700
122801
1
1
2
2
1
2
1
1
1
6
1
Description
Red Indicator Light - 24 VAC
Rocket Heat Selector Switch - 24 VAC
Coin Meter Control Panel Assembly Complete Less Meter - 24 VAC
(includes illus. nos. 1 through 6 and 8 through 12)
Coin Meter Control Panel Only
Push-To-Start Relay - 24 VAC
#10-24 x 1/2" Phillips Round Head Machine Screw
#10-24 Speed Nut
25¢ Coin Meter (Specify Timing) - 24 VAC
#4 x 3/4" Pan Head "A" Screw
12-Position Terminal Block
# 10-16 x 1/2" Phillips Round Head Crimptite Screw
9-Pin Male Connector Only
Pin Terminal Only
Pin/Extraction Tool
* Consult factory for coin meters not listed.
450122-6
Telephone: (508) 678-9000 / www.amdry.com
17
Non-Microprocessor Control Box Assembly
Illus. No.
1
2
3
4
5
6
7
8**
9
10
11
12
13
14
15
16
Part No.
122603
122701
122801
315010
150300
150300
141403
136008
136057
150301
150002
120715
151000
132475
150103
151001
824828
Qty.
1
6
1
1
2
2
1
*
*
*
2
1
2
1
4
4
1
Description
9-Pin Socket Female Connnector
Socket Terminal Only
Pin/Socket Extraction Tool
9-Pin Connector Bracket
#10 x 1/2" Hex Washer TEK Screw
#10 x 1/2" Hex Washer TEK Screw
24Vac Transformer
Fuse Block/Strip Only
1/2 Amp (Slo Blo) Fuse
#8-18 x 7/16" Phillips Pan Head TEK Screw
#6-32 x 1" Slotted Round Head Machine Screw
30-Position Terminal Block
#6-32 Pal Nut
Motor Contactor
#8-32 x 3/4" Phillips Round Head Machine Screw
#8-32 Pal Nut
Filter Capacitor
* For 115 VAC application quanity is 1 and for 208/230 VAC application quanity is 2.
** Check fuse rating for verification.
18
American Dryer Corporation
450122-6
Main Door Assembly
Illus. No.
Part No.
Qty.
1
882991
1
2
3
4
5
800448
150410
152014
102349
102354
102210
170730
1
4
4
1
1
1
1
150431
1
6
7
450122-6
Description
Black Main Door Assembly Complete
(includes illus. nos. 1 and 5 through 7)
12-1/2" Stainless Steel Main Door Hinge
#10-24 x 3/8" Phillips Pan Head Taptite Screw
1/4-20 Free Spin Wash Nut
Plastic Main Door Gasket Only
Stainless Steel Main Door Gasket Only
20-7/16" Door Glass Only
Adhesive for Door Glass and Gasket
(10.3 oz Cartridge)
Main Door Latch Screw
(#10 x 7/16" Dome Head Screw)
Telephone: (508) 678-9000 / www.amdry.com
19
Main Door Switch Assembly
Illus. No.
20
Part No.
Qty.
1
2
3
4
5
6
152013
153008
137005
121028
154281
800448
2
2
1
2
2
1
7
8
9
10
153565
313218
150201
121405
2
1
2
1
Description
#6-32 Hex Nut
#6 Lock Washer
Single Pole Door Switch
Insulated Female Terminal
3/8" Standard Nylon Spacer
12-1/2" Stainless Steel Main Door Hinge
inlcudes illus. nos. 6 and 7)
#6 Clinch Stud
Main Door Switch Housing Only
#10-32 x 1/4" Phillips Pan Head TEK Screw
Rubber Grommet
American Dryer Corporation
450122-6
Coin Vault Assembly
Illus. No.
Part No.
Qty.
1*
2
3
4*
880118
880901
160036**
160136**
880117
1
1
1
1
1
5*
--------
1
6
152014
4
Description
AD-26/AD-295 Coin Box Assembly Only Less Lock
AD-26/AD295 Coin Box Faceplate Only
ACE® Lock Assembly with Key
ACE® Key Only
AD-26/AD-295 Coin Vault Assembly Only Less Lock
(includes illus. nos. 1, 4, and 6)
AD-26/AD-295 Front Panel Assembly
(refer to Coin Front Panel Assembly on page 22)
#1/4-20 Free Spin Wash Nut
* Specify color when ordering.
** Specify key number when ordering.
450122-6
Telephone: (508) 678-9000 / www.amdry.com
21
Coin Front Panel Assembly
Illus. No.
Part No.
Qty.
1*
880908
1
2
3
4
5
154215
170330
150309
121405
2
1
1
1
Description
AD-26/AD-295 Front Panel Assembly Complete
(includes illus. nos. 1, 2, 3, and 5)
5/32 x 1/4" Pop Rivet
Friction Door Latch
#10-16 x 1/2" HH TEK Crimptite Screw
Rubber Grommet
* Specify color when ordering.
22
American Dryer Corporation
450122-6
Non-Coin Front Panel Assembly
Illus. No.
Part No.
Qty.
1*
880919
1
2
3
4
5
154215
170330
150309
121405
2
1
1
1
Description
AD-26/AD-295 Non-Coin Front Panel Assembly Complete
(includes illus. nos. 1, 2, 3, and 5)
1/8" Pop Rivet
Friction Door Latch
#10-16 x 1/2" HH TEK Crimptite Screw
Rubber Grommet
* Specify color when ordering.
450122-6
Telephone: (508) 678-9000 / www.amdry.com
23
Lint Door Assembly
Illus. No.
Part No.
Qty.
1
880248*
1
880889*
160015
160104
160016
180316
150201
180315
150201
117604
1
1
1
1
1
5
1
5
7
2
3
4
5
6
7
8
Description
AD-26/AD-295 Lint Door with Trim Less Locks
(includes illus. nos. 1, and 4 through 8)
AD-26/AD-295 Lint Door Only
MK-100 Lock Assembly Only
MK-100 Key Only
Lock Cam Only
AD-26/AD-295 Upper Door Trim
#10-32 x 1/4" Phillips Pan Head TEK Screw
AD-26/AD-295 Lower Door Trim
#10-32 x 1/4" Phillips Pan Head TEK Screw
1/8” x 3/8” Neo.Sponge Tape (sold in feet)
* Specify color when ordering.
24
American Dryer Corporation
450122-6
Lint Basket /Lint Switch Assemblies
Illus. No.
1*
Part No.
Qty.
880909
1
850827
1
2
3
4
5
6
117604
122116
122605
122701
880921
4
1
1
4
1
7
8
9
150301
122700
122604
4
8
2
Description
AD-26 Lint Basket Assembly
(includes illus. nos. 1 and 2)
AD-295 Lint Basket Assembly
(includes illus. nos. 1 and 2)
Noise Suppressor Tape (sold by the foot)
Lint Door Switch - 24 VAC
4-Pin Socket Connector
Socket Terminal Only
AD-26/AD-295 Lint Basket Switch Box Assembly
(includes illus. nos. 3 through 6)
#8-18 x 7/16" Phillips Pan Head TEK Screw
Pin Terminal Only
4-Pin Connector Only
* Specify color when ordering.
450122-6
Telephone: (508) 678-9000 / www.amdry.com
25
AD-26 Tumbler/Support Assemblies
For Models Mfd. as of August 17, 1998
Illus. No.
1
Part No.
Qty.
800835
1
800718*
1
12
150415
301318
301317
150518
100916
153003
850066
152004
153002
153001
115999
401010
100139
30
2
1
1
3
3
1
3
3
3
1
1
1
13
14
115992
100802
1
1
2
3
4
5
6
7
8
9
10
11
Description
AD-26 Tumbler and Support Assembly Complete with Felt Collars
(includes illus. nos. 1 through 11 and 13)
AD-26 Tumbler Only without Felt Collars
(includes illus. nos. 1, 2, and 3)
#10-16 x 1/2" Phillips Round Head Crimptite Screw
AD-26 Short Tumbler Rib Only
AD-26 Tall Tumbler Rib Only
#5/16-18 x 3/8" Socket Button Head Screw
3/8”-16 x 25" Tie Rod Only
3/8" x 1-1/2" Fender Washer
Tumbler Support Only
#5/16-18 Hex Nut
5/16" Lock Washer
5/16" Flat Washer
Felt Collar Only
#847 Adhesive for Felt Collar (5 ounce tube)
12-Rib 120" Poly "J" Belt
(refer to 12-Rib 120" (J) Poly Belt Arrangement on page 41)
Inner Ring Felt Collar Only
1-3/8" Retaining Ring
* Felt collars arenot included and must be ordered separately.
26
American Dryer Corporation
450122-6
AD-26 Tumbler/Support Assemblies
For Models Mfd. prior to August 17, 1998
Illus. No.
1
Part No.
Qty.
800835
1
800718*
1
12
150415
301318
301317
150518
882051
153003
850061
152004
153002
153001
115999
401010
100139
30
2
1
1
3
3
1
3
3
3
1
1
1
13
14
115992
100802
1
1
2
3
4
5
6
7
8
9
10
11
Description
AD-26 Tumbler and Support Assembly Complete with Felt Collars
(includes illus. nos. 1 through 11 and 13)
AD-26 Tumbler Only without Felt Collars
(includes illus. nos. 1, 2, and 3)
#10-16 x 1/2" Phillips Round Head Crimptite Screw
AD-26 Short Tumbler Rib Only
AD-26 Tall Tumbler Rib Only
#5/16-18 x 3/8" Socket Button Head Screw
#5/16-18 x 25" Tie Rod Only
3/8" x 1-1/2" Fender Washer
Tumbler Support Only
#5/16-18 Hex Nut
5/16" Lock Washer
5/16" Flat Washer
Felt Collar Only
#847 Adhesive for Felt Collar (5 ounce tube)
12-Rib 120" Poly "J" Belt
(refer to 12-Rib 120" (J) Poly Belt Arrangement on page 41)
Inner Ring Felt Collar Only
1-3/8" Retaining Ring
* Felt collars arenot included and must be ordered separately.
450122-6
Telephone: (508) 678-9000 / www.amdry.com
27
AD-295 Tumbler/Support Assemblies
For Models Mfd. as of November 2, 1998
Illus. No.
1
Part No.
800832
Qty.
1
800892
800722*
1
800842*
1
12
150415
301315
301316
301414
301415
150518
882050
153001
850066
152004
153002
153001
116003
401010
100139
30
2
1
2
1
1
3
3
1
3
3
3
1
1
1
13
14
115992
100802
1
1
2
3
4
5
6
7
8
9
10
11
Description
AD-295 Tumbler and Support Assembly Complete with Felt Collars
(includes illus. nos. 1 through 11 and 13)
AD-295 Stainless Steel Tumbler and Support Assembly Complete
with Felt Collars
(includes illus. nos. 1 through 11 and 13)
AD-295 Tumbler Only without Felt Collars
(includes illus. nos. 1, 2, and 3)
AD-295 Stainless Steel Tumbler Only without Felt Collars
(includes illus. nos. 1, 2, and 3)
#10-16 x 1/2" Phillips Round Head Crimptite Screw
AD-295 Short Tumbler Rib Only
AD-295 Tall Basket Rib (Tumbler) Only
AD-295Stainless Steel Short Tumbler Rib Only
AD-295 Stainless Steel Tall Basket Rib (Tumbler) Only
#5/16-18 x 3/8" Socket Button Head Screw
#5/16-18 x 31" Tie Rod Only
5/16" Flat Washer
Tumbler Support Only
#5/16-18 Hex Nut
5/16" Lock Washer
5/16" Flat Washer
Felt Collar Only
#847 Adhesive for Felt Collar (5 ounce tube)
12-Rib 120" Poly "J" Belt
(refer to 12-Rib 120" (J) Poly Belt Arrangement on page 41)
Inner Ring Felt Collar Only
1-3/8" Retaining Ring
* Felt collars arenot included and must be ordered separately.
28
American Dryer Corporation
450122-6
AD-295 Tumbler/Support Assemblies
For Models Mfd. prior to November 2, 1998
Illus. No.
1
Part No.
800832
Qty.
1
800892
800722*
1
800842*
1
12
150415
301315
301316
301414
301415
150518
882050
153001
850061
152004
153002
153001
116003
401010
100139
30
2
1
2
1
1
3
3
1
3
3
3
1
1
1
13
14
115992
100802
1
1
2
3
4
5
6
7
8
9
10
11
Description
AD-295 Tumbler and Support Assembly Complete with Felt Collars
(includes illus. nos. 1 through 11 and 13)
AD-295 Stainless Steel Tumbler and Support Assembly Complete
with Felt Collars
(includes illus. nos. 1 through 11 and 13)
AD-295 Tumbler Only without Felt Collars
(includes illus. nos. 1, 2, and 3)
AD-295 Stainless Steel Tumbler Only without Felt Collars
(includes illus. nos. 1, 2, and 3)
#10-16 x 1/2" Phillips Round Head Crimptite Screw
AD-295 Short Tumbler Rib Only
AD-295 Tall Basket Rib (Tumbler) Only
AD-295Stainless Steel Short Tumbler Rib Only
AD-295 Stainless Steel Tall Basket Rib (Tumbler) Only
#5/16-18 x 3/8" Socket Button Head Screw
#5/16-18 x 31" Tie Rod Only
5/16" Flat Washer
Tumbler Support Only
#5/16-18 Hex Nut
5/16" Lock Washer
5/16" Flat Washer
Felt Collar Only
#847 Adhesive for Felt Collar (5 ounce tube)
12-Rib 120" Poly "J" Belt
(refer to AD-26/AD-295 12-Rib 120" (J) Poly Belt Arrangement on
page 41)
Inner Ring Felt Collar Only
1-3/8" Retaining Ring
* Felt collars arenot included and must be ordered separately.
450122-6
Telephone: (508) 678-9000 / www.amdry.com
29
Tumbler Brush Assembly
Illus. No.
1
2
3
4
5
6
7
8
30
Part No.
170196
317652
154210
120117
317650
102325
154210
100139
Qty.
2
2
6
2
1
1
2
1
Description
AD-26/AD-295 Drive Belt Sealing Brush
AD-26/AD-295 Sealing Brush Clip End
5/16" x 3/16" Pop Rivet
3/8" EMT Hanger
AD-26/AD-295 Wrapper Gasket Strip
8-1/2" x 1-1/2" x 1/8" Wrapper Channel Gasket
5/32" x 3/16" Pop Rivet
12-Rib 120" Poly "J" Belt
(refer to 12-Rib 120" (J) Poly Belt Arrangement on page 41)
American Dryer Corporation
450122-6
Microprocessor Temperature Sensor Bracket Assembly
Illus. No.
Part No.
Qty.
1
880925
1
2
3
4
5
6
7
305016
150000
153010
130102
152013
154007
880251
1
2
2
1
2
2
1
122701
122605
122700
122604
122801
121405
881537
4
1
4
1
1
1
2
8
9
10
11
12
13
450122-6
Description
AD-26/AD-295 Microprocessor Temperature Sensor Bracket Assembly
Complete
(includes illus. nos. 1 through 9, 12, and 13)
AD-26/AD-295 Temperature Sensor Bracket Top Only
#6-32 x 1/4" Round Head Machine Screw
#6 Star Washer
190º Large Thermostat Only
#6-32 Hex Nut
1/4" Tinnerman Push-On Fastener
1/4" Temperature Sensor Probe Assembly
(includes illus. nos. 6 through 9)
Socket Terminal Only
4-Pin Socket Connector Only
Pin Terminal Only
4-Pin Connector Only
Pin/Socket Extraction Tool
Rubber Grommet
Tinnerman "S" Clip
Telephone: (508) 678-9000 / www.amdry.com
31
Non-Microprocessor Temperature Sensor Backet Assembly
Illus. No.
32
Part No.
Qty.
1
880907
1
2
3
4
5
6
7
8
9
10
11
12
13
14
153010
150005
130106
152000
840065
840062
130100
130111
130105
122701
122605
122604
122700
5
5
1
5
1
1
1
1
1
4
1
1
4
Description
AD-26/AD-295 Non-Microprocessor Sensor Bracket Assembly Complete
(includes illus. nos. 1 through 12)
#6 Star Washers
#6-32 x 1/4 Round Head Machine Screw
Large 170º Thermostat Only
#6-32 Hex Nut
Sensor Jumper
Sensor Bracket Harness
Large 150º Thermostat Only
Large 130º Thermostat Only
Large 100º Thermostat Only
Socket Terminal Only
4 -Pin Socket Connector
4-Pin Conector
Pin Terminal Only
American Dryer Corporation
450122-6
Sail Switch Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
10
450122-6
Part No.
Qty.
150301
802800
2
1
802801
1
154004
150415
802799
122200
150303
105500
319206
154002
1
2
1
1
2
1
1
1
Description
#8-18 x 7/16" Phillips Pan Head TEK Screw
Sail Switch Box with Cover and Bracket Only
(includes illus. nos. 2, 4, and 5)
Sail Switch Box Assembly Complete
(includes illus. nos. 2 through 10)
Twin Speed Nut
#10-16 x 1/2" Phillips Round Head Crimptite Screw
Sail Switch Box Cover and Bracket Only
Sail Switch Only
#4 x 3/4" Pan Head "A" Machine Screw
Sail Switch Actuator Rod
Sail Switch Damper (embossed)
1/8" Push-on Fastener
Telephone: (508) 678-9000 / www.amdry.com
33
Tumbler Bearing Assembly
34
American Dryer Corporation
450122-6
Tumbler Bearing Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Part No.
Qty.
880203
153005
152005
150508
153005
152005
150600
153004
153005
152005
150501
153002
153001
150621
152004
801101
1
4
4
2
2
2
2
2*
2
2
4
4
4
2
2
1
801103
1
17
18
801105
801104
880202
880779
1
1
1
1
19
20
21
152004
150610
824807
2
2
1
Description
1-3/8" Flange Bearing Only
3/8" Lock Washer
#3/8-16 Hex Nut
#3/8-16 x 3/4" Hex Head Machine Bolt
3/8" Lock Washer
#3/8-16 Hex Nut
#3/8-16 x 1-1/2" Hex Head Machine Bolt
3/8" Flat Washer
3/8" Lock Washer
#3/8-16 Hex Nut
#5/16-18 x 3/4" Hex Head Machine Bolt
5/16" Lock Washer
5/16" Flat Washer
#5/16-18 x 1-1/2" Hex Head Machine Bolt
#5/16-18 Hex Nut
1-3/8" Bearing Box Assembly Complete
(includes illus. nos. 4 through 20)
For models mfd. without Rotational Sensor
1-3/8" Bearing Box and Support Assembly Only
(includes illus. nos. 4, 5, 6, 16, and 17)
1-3/8" Bearing Box Only
1-3/8" Pillow Block Bearing Support Only
1-3/8" Pillow Block Bearing Only
1-3/8" Pillow Block Bearing Assembly with Magnet
(for models mfd. with Rotational Sensor)
#5/16-18 Hex Nut
#5/16-18 x 1-1/2" Allen Set Screw
Rotational Sensor Assembly
* Some models require a quanity of 4.
450122-6
Telephone: (508) 678-9000 / www.amdry.com
35
Totally Enclosed, Non-Vent Motor/Idler Assemblies
Illus. No.
1
2
3
4
5
6
7
8
9
36
Part No.
Qty.
152006
153050
100702
100604
117684
880890
880893
2
1
1
1
4
1
1
880894
1
100099
100054
153001
153002
1
1
4
4
Description
1/2-20 Left Hand Jam Nut
1/2" S.A.E. Flat Washer
1/8" x 1/8" x 1-1/2" Key
Impellor (Fan/Blower) Only
Noise Suppressor Tape (sold in feet)
AD-26/AD-295 Motor Mount Only
AD-26/AD-295 Motor Mount Assembly Complete - 60 Hz Models Only
(includes illus. nos. 1 through 10 and 14 through 18)
AD-26/AD-295 Motor Mount Assembly Complete - 50 Hz Models Only
(includes illus. nos. 1 through 10 and 14 through 18)
1/2 HP 115/208-230/60 Hz/1ø T.E.N.V. Motor with Plug
1/2 HP 115/208-230/50 Hz/1ø T.E.N.V. Motor with Plug
5/16" Flat Washer
5/16" Lock Washer
American Dryer Corporation
450122-6
Totally Enclosed, Non-Vent Motor/Idler Assemblies (continued)
Illus. No.
10
11
Part No.
Qty.
15
16
17
18
19
154279
122701
122801
137030
100173
101097
101099
154327
101096
153024
150217
880922
4
*
1
1
1
1
1
1
1
1
1
1
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
880895
153005
153004
153005
152005
802203
153007
150112
152002
153018
153007
157010
154278
150600
100251
100429
170359
152000
153008
150001
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
12
13
14
Description
#5/16-18 x 3/4" Carriage Bolt
Socket Termianl Only
Pin/Socket Extraction Tool
8-Pin Housing
12-Rib 120" Poly "J" Belt
Rear Motor Shaft Bushing (for 60 Hz Models Only)
Rear Motor Shaft Bushing (for 50 Hz Models Only)
Rear Bushing Set Screw
Front Motor Shaft Bushing Only
#10 Lock Washer
#10-32 x 3/4" Phillips Round Head Machine Screw
Idler Assembly Complete
(includes illus. nos. 19 through 38)
Idler Plate Angle Assembly Only
#3/8-16 x 3-3/8" Spade Bolt
3/8" Flat Washer
3/8" Lock Washer
#3/8"-16 Hex Nut
Idler Plate
1/4" Lock Washer
#1/4-20 x 1 1/4" Hex Head Bolt
#1/4-20 Hex Nut
1/4" Flat Washer
1/4" Lock Washer
1-7/8" Extension Spring
#5/16-18 x 5/8" Shoulder Screw
#3/8-16 x 1/2" Hex Head Bolt
Idler Pulley Only
Idler Pivot Sleeve
Nylon Spacer
#6-32 Hex Nut
#6 Lock Washer
#6-32 x 1/2 Round Head Machine Screw
* As required.
450122-6
Telephone: (508) 678-9000 / www.amdry.com
37
Upshot Burner Assembly
38
American Dryer Corporation
450122-6
Upshot Burner Assembly
Illus. No.
1
2
3
4
5
6
7
Part No.
Qty.
8
9
10
11
881372
141303
143001
142700
142500
142812
128927
140411
318700
150300
141238
--------
1
1
1
1
1
1
1
1
1
2
1
1
12
13
880891
880892
1
1
141130
141131
1
1
152001
150300
820100
882627
152000
153010
150301
318083
150300
880923
2
2
1
1
4
4
2
1
4
1
880924
1
318076
150300
319706
130401
150301
141109
128918
128917
150315
318009
--------
1
4
1
1
1
1
1
1
2
1
1
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
---
450122-6
Description
Straight Shut-Off
1/2" Union Tail Piece
1/2" Coupling
Close Nipple
1/2" x 90º Elbow
1/2" x 3" Nipple
1/2" 24 VAC DSI Redundant Valve (natural gas)
1/2" Valve Conversion Kit (liquid propane)
Pipe Bracket
#10 x 1/2" Hex Washer TEK Screw
1/2" Manifold
Burner Orifice
(refer to Upshot Burner Orifice Listing on page 42)
AD-26/AD-295 Burner Front and Back Bracket
ADG-26/ADG-295 Upshot Burner Tube Assembly
(includes illus. nos. 13 and 30 through 33)
Tube Only
Tube and Spreader
(includes item no. 29)
#8-32 Hex Nut
#10 x 1/2" Hex Washer TEK Screw
DSI Mounting Bracket
ADC DSI Module Only (50/60 Hz)
6-32 Hex Nut
#6 Star Washer
#8-18 x 7/16" Phillips Pan Head TEK Screw
Outer Burner Baffle
#10-32 x 1/2" Hex Washer Tek Screw
ADG-26 Burner Box Assembly
(includes illus. nos. 23 through 26)
ADG-295 Burner Box Assembly
(includes illus. nos. 23 through 26)
Burner Box Cover
#10 x 1/2" Hex Washer TEK Screw
Hi-Limit Bracket
330º Hi-Limit Only
#8-18 x 7/16" Phillips Pan Head TEK Screw
Flame Spreader
Flame Sensor
Spark Electrode with High Voltage (HV) Wire
#6 x 3/8" Phillips Pan Head "B" Screw
PSE Burner Tube Bracket
Conversion Kit
(refer to L.P. Conversion Kit Listing on page 42)
Telephone: (508) 678-9000 / www.amdry.com
39
Back Guard Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
150301
314408
150300
318065
312530*
312537*
150301*
6
1
8
2
1
1
11
6
Description
#8-18 x 7/16" Philips Pan Head TEK Screw
AD-26/295 Back Guard
#10 x 1/2" Hex Washer TEK Screw
AD-26/295 Clean Out Plate
AD-26 Outer Top
AD-295 Outer Top
#8-18 x 7/16” Phillips Pan Head TEK Screw
* Items not shown in drawing.
40
American Dryer Corporation
450122-6
12-Rib 120" (J) Poly Belt Arrangement
450122-6
Telephone: (508) 678-9000 / www.amdry.com
41
Upshot Burner Assembly Specifications
Upshot Burner Orifice Listing*
Model
Number
Qty.
ADG-26D @ 60 Hz
ADG-26D @ 50 Hz
ADG-295D @ 60 Hz
ADG-295D @ 50 Hz
1
1
1
1
Natural Gas
D.M.S.
Part No.
#26
#29
#23
#28
140823
140820
140856
140821
L.P. Gas
D.M.S.
Part No.
#43
#46
#42
#44
140809
140806
140810
140808
* Consult factory for elevations over 2,000 feet.
L.P. Conversion Kit Listing*
Model Number
ADG-26D @ 60 Hz
ADG-26D @ 50 Hz
ADG-295D @ 60 Hz
ADG-295D @ 50 Hz
Kit Part Number
874061
880932
880782
880933
* Consult factory for elevations over 2,000 feet.
42
American Dryer Corporation
450122-6
Additional Parts Available
Part No.
Description
114006
114533
112280
114001
112534
120802
120902
120903
121014
121499
121500
122804
404500
404502
404506
404507
410001
“Warning - Fire Hazards” Label
“120v Electric Service” Label
“Super 30 Lint Screen” Label
“Lint Screen” Label
“Phase 5 Non-Coin Program Location Summary” Label
Red Butt Connector
#74B Wire Nut
Crimp-on Wire Nut
1/4" Insulated (female) Terminal
4" Harness Tie
7" Harness Tie
Hydroguage, 15"
Almond Brush-In-Cap Bottle Touch-Up Paint
White Brush-In-Cap Bottle Touch-Up Paint
Almond "B" Brush-In-Cap Bottle Touch-Up Paint
Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint
1/2" Allen Wrench
450122-6
Telephone: (508) 678-9000 / www.amdry.com
43
ADC 450122
6 - 04/19/05-0