Download American Dryer Corp. AD-120ES User's Manual

AD-120ES Parts Manual
24 VAC Phase 5
1995-2001
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
e-mail: [email protected]
www.amdry.com
120195
072997WL/tf
ADC Part No. 450160
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is
properly maintained, it will provide many years of safe, efficient, and trouble-free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with
the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
POUR VOTRE SÉCURITÉ
Do not store or use gasoline or
other flammable vapors and
liquids in the vicinity of this or
any other appliance.
Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet
appareil ou de tout autre appareil.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.
Important
For your convenience, log the following information:
DATE OF PURCHASE ___________________________
RESELLER’S NAME
Serial Number(s)
AD-120ES
MODEL NO. __________________________________________
______________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory,
you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508)
678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that
your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of
the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the instructions
to be followed if the user smells gas. These instructions must be posted in a
prominent location near the dryer.
Table of Contents
Control Door Assembly...................................................................................................................... 3
Control Door Assembly (Sprinkler Option) .......................................................................................... 4
Microprocessor Control Panel Assembly ............................................................................................. 5
Microprocessor Control Box Assembly ........................................................................................... 6, 7
Dual Timer Control Panel Assembly ................................................................................................ 8, 9
Dual Timer Control Box Assembly ............................................................................................... 10, 11
Front Panel/Main Door Assemblies
For Models Mfd. as of August 31, 2000 .................................................................................. 12, 13
Front Panel/Main Door Assemblies
For Models Mfd. prior to August 31, 2000 .............................................................................. 14, 15
Main Door Switch Assembly
For Models Mfd. as of August 31, 2000 ........................................................................................ 16
Main Door Switch Assembly
For Models Mfd. prior to August 31, 2000 .................................................................................... 17
Lint Drawer/Lint Drawer Switch Box Assemblies
For Models Mfd. as of August 30, 1999 ........................................................................................ 18
Lint Drawer/Lint Drawer Switch Box Assemblies
For Models Mfd. Between December 1, 1994 and August 30, 1999 ............................................... 19
Lint Door Assembly ......................................................................................................................... 20
Microprocessor Controller (Computer) Temperature Sensor Bracket Assembly ................................... 21
Dual Timer Temperature Sensor Bracket Assembly ....................................................................... 22, 23
Basket (Tumbler)/Support Assemblies ......................................................................................... 24, 25
Basket (Tumbler) Bearing Mount Assembly ................................................................................. 26, 27
Idler Bearing Mount Assembly .................................................................................................... 28, 29
Basket (Tumbler) Drive Motor Mount Assembly .......................................................................... 30, 31
Blower Motor Mount Assembly
For Models Mfd. as of July 17, 2000 ............................................................................................ 32
Impellor/Fan Assembly
For Models Mfd. prior to November 6, 2000 ................................................................................ 33
Blower Motor Mount Assembly
For Gas Models Mfd. prior to November 6, 2000 ................................................................... 34, 35
Blower Motor Mount Assembly
For Electric Models Mfd. prior to November 6, 2000 .............................................................. 36, 37
Blower Motor Mount Assembly
For Steam Models Mfd. prior to November 6, 2000 ................................................................ 38, 39
Direct Spark Ignition (DSI) Burner Assembly
For Gas Models Only ............................................................................................................ 40, 41
Direct Spark Ignition (DSI) Module Assembly
For Gas Models Mfd. as of April 1, 2000 ...................................................................................... 42
Direct Spark Ignition (DSI) Module Assembly
For Gas Models Mfd. prior to April 1, 2000 .................................................................................. 43
Electric Oven Assembly
For Electric Models Only ....................................................................................................... 44, 45
Electric Oven Relay Box Assembly
208-240 VAC 3ø 50/60 Hz ......................................................................................................... 46
Electric Oven Relay Box Assembly
380-416/480 VAC 3ø 50/60 Hz ................................................................................................... 47
Sail Switch Assembly ....................................................................................................................... 48
Steam Damper Assembly
For Steam Models Only ............................................................................................................... 49
Microprocessor Reversing Contactor Mounting Panel Assembly .......................................................... 50
Dual Timer Reversing Contactor Mounting Panel Assembly ................................................................. 51
Extended Back Guard Assembly ....................................................................................................... 52
Step Down Transformer Application Listing ....................................................................................... 53
Electric Oven Component Application Listing
For Electric Models Only ............................................................................................................. 54
Electric Oven Power Distribution
72 kW 208-240 VAC 3ø 50/60 Hz............................................................................................... 55
Electric Oven Power Distribution
72 kW 380-416/480 VAC 3ø 50/60 Hz ........................................................................................ 56
Electric Oven Power Distribution
80 kW 208-240 VAC 3ø 50/60 Hz............................................................................................... 57
Electric Oven Power Distribution
80 kW 380-416/480 VAC 3ø 50/60 Hz ........................................................................................ 58
Electric Oven Wiring
72/80 kW 208-240 VAC 3ø 50/60 Hz.......................................................................................... 59
Electric Oven Wiring
72/80 kW 380-416/480 VAC 3ø 50/60 Hz ................................................................................... 60
Sprinkler Pneumatic Assembly .......................................................................................................... 61
Sprinkler Panel Assembly ........................................................................................................... 62, 63
Sprinkler Pipe Assembly............................................................................................................. 64, 65
Relay Panel (Sprinkler Option) ................................................................................................... 66, 67
Temperature Sensor Assembly for Sprinkler ................................................................................... 68
Back Guard Assembly ..................................................................................................................... 69
Additional Parts Available ................................................................................................................. 70
Control Door Assembly
Illus. No.
Part No.
Qty.
1
820004*
1
820003
1
820006*
1
820009
1
160005
112360
870011
150309
102600
102601
102505
2
1
1
9
1
1
1
2
3
4
5
6
7
*
3
Description
Control Door Assembly ONLY
(for gas models and electric models Only)
Stainless Steel Control Door Assembly ONLY
(for gas models and electric models Only)
Short Control Door ONLY
(for steam models Only)
Stainless Steel Control Door Assembly ONLY
(for steam models Only)
Spring Turn Latch (2-piece)
ADC Logo ONLY
Logo Double Tape Kit
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Control Door Support Rod Catch
Control Door Retainer Clip
Control Door Support Rod
Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
4
Control Door Assembly (Sprinkler Option)
Illus No.
Part No.
Qty.
1
2
3
881314
160005
112360
870011
150415
102600
102601
102505
123211
122420
123200
132388
132387
1
2
1
1
9
1
1
1
1
1
1
1
1
4
5
6
7
8
9
10
11
12
American Dryer Corporation
Description
Control Door Assembly ONLY
Spring Turn Latch (2-piece)
ADC Logo ONLY
Double Tape Kit
#10-16 x 1/2” Phillips Round Head Crimptite Screw
Control Door Support Rod Catch
Control Door Rod Retainer Clip
Control Door Support Rod
120V Panel Light Bulb
Engraved Label “Sprinkler Stop”
Amber Lighted Push-Button Operator
Normally Opened (N.O.) Contact Block with Direct Supply Base
Normally Closed (N.C.) Contact Block
88 Currant Road / Fall River, MA 02720-4781
5
Microprocessor Control Panel Assembly
Illus. No.
Part No.
Qty.
1
112535
112276
112275
112277
112278
1
1
1
1
1
2
880836
801260
1
1
801215
1
801214
1
137231
824998
153010
150005
150309
136048
1
1
2
2
1
1
3
4
5
6
7
*
Description
Non-Coin English Keyboard Label Assembly
Non-Coin Stick-On Label (English Only)*
3-Language Non-Coin Stick-On Label (Spanish, Italian, and Hebrew)*
3-Language Non-Coin Stick-On Label (English, Spanish, and Hebrew)*
5-Language Non-Coin Stick-On Label
(Italian, Dutch, French, German, and Chinese)*
Microprocessor Controller (computer) Control Panel ONLY
Microprocessor Controller (computer) Control Panel ONLY
with Battery Bracket
Microprocessor Controller (computer) Control Panel Assembly Complete
(includes illus. nos. 1 through 5 and 7)
Microprocessor Control Panel Assembly Complete with Battery Option
(includes illus. nos. 1 through 5 and 7)
Phase 5 Non-Coin Reversing Microprocessor Controller (computer) ONLY
Phase 5 Battery Clip ONLY
#6 Star Washer
#6-32 x 3/4” Phillips Round Head Machine Screw
#10-16 x 1/2” Hex Head TEK Crimptite Screw
1/8-amp Slo-Blo Fuse ONLY
Not illustrated.
IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller
(computer).
Telephone: (508) 678-9000
Fax: (508) 678-9447
6
American Dryer Corporation
Microprocessor Control Box Assembly
88 Currant Road / Fall River, MA 02720-4781
7
Microprocessor Control Box Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
8
150100
141403
151001
150002
120715
151000
150102
136057
182453
136008
150413
131932
150413
121010
122631
122705
122704
122630
122625
137025
122704
122705
122626
122706
122641
122800
122801
2
1
2
2
1
2
2 or 3
2
2 or 3
2 or 3
2
1
1
1
1
*
*
1
1
1
12
12
1
11
1
1
1
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
----*
Description
#8-32 x 1/2” Round Head Machine Screw
24 VAC Transformer - 50/60 Hz (for gas and steam models Only)
#8-23 Pal Nut
#6-32 x 1” Round Head Machine Screw
30-Position Terminal Block
#6-32 Pal Nut
#8 x 3/8” Phillips Round Head TEK Screw
1/8-amp Slo-Blo Fuse ONLY
6-amp (fast acting) Fuse (for electric models Only)
Fuse Block/Strip ONLY
#10-16 x 1/2” TORX Crimptite Screw
24 VAC Relay (for electric models Only)
#10-16 x 1/2” TORX Crimptite Screw
L-70 Ground Lug
6-Pin Connector ONLY
Socket Terminal ONLY
Pin Terminal ONLY
6-Pin Connector ONLY
15-Pin Connector ONLY
15-Position Strain Relief, Not Illustrated
Pin Terminal ONLY
Socket Terminal ONLY
15-Pin Socket Connector ONLY
Microprocessor Socket ONLY
15-Pin Microprocessor Connector ONLY
Microprocessor (female) Pin Extraction Tool, Not Illustrated
Pin/Socket Extraction Tool, Not Illustrated
As required (either 2 or 3).
Telephone: (508) 678-9000
Fax: (508) 678-9447
8
Dual Timer Control Panel Assembly
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
9
Dual Timer Control Panel Assembly
Illus. No.
Part No.
Qty.
1
2
3
123005
122400
880838
1
1
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
---
880837
131917
150207
154001
152000
153010
120730
153565
150110
153560
131931
151000
112050
150309
124103
124025
124030
122602
122700
122801
1
1
2
2
2
2
1
2
4
2
1
1
1
1
2
1
1
1
7
1
Telephone: (508) 678-9000
Description
Red Indicator Light - 24 VAC
Rocker Heat Selector Switch
Dual Timer Control Panel Assembly Complete - 24 VAC
(includes illus. nos. 1 through 15 and 17 through 21)
Dual Timer Control Panel ONLY
Push To Start Relay - 24 VAC
#10-24 x 1/2” Phillips Round Head Machine Screw
#10-24 Speed Nut
#6-32 Hex Nut
#6 Star Washer
30-Position Terminal Block
#6-32 x 1” Clinch Stud
#8-32 x 1/4” Phillips Round Head Machine Screw
#6-32 x 1/2” Clinch Stud
Dual Timer Relay - 24 VAC
#10-16 x 1/2” Pal Nut
Dual Timer Label ONLY
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Arrow Timer Knob
60-Minute Timer - 24 VAC
15-Minute Timer - 24 VAC
9-Pin Connector ONLY
Pin Terminal ONLY
Pin/Socket Extraction Tool, Not Illustrated
Fax: (508) 678-9447
10
American Dryer Corporation
Dual Timer Control Box Assembly
88 Currant Road / Fall River, MA 02720-4781
Dual Timer Control Box Assembly
Illus. No.
Part No.
Qty.
1
2
122603
122701
122801
315010
150300
150100
141403
151001
150002
120715
151000
150102
136057
182453
136008
150413
131932
150413
121010
122631
122705
122704
122630
137025
122625
122704
122705
122626
122801
1
7
1
1
2
2
1
2
2
1
2
2 or 3
2
1
2 or 3
2
1
1
1
1
*
*
1
1
1
12
12
1
1
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
--*
11
Description
9-Pin Socket Connector
Socket Terminal ONLY
Pin/Socket Extraction Tool, Not Illustrated
9-Pin Connector Bracket
#10-16 x 1/2” Hex Washer TEK Screw
# 8-32 x 1/2” Phillips Round Head Machine Screw
24 VAC Transformer - 50/60 Hz (for gas models and steam models Only)
#8-23 Pal Nut
#6-32 x 1” Phillips Round Head Machine Screw
30-Position Terminal Block
#6-32 Pal Nut
#8 x 3/8” Phillips Round Head TEK Screw
1/2-amp Slo-Blo Fuse ONLY
6-amp (fast acting) Fuse (for electric models Only)
Fuse Block/Strip ONLY
#10-16 x 1/2” TORX Crimptite Screw
24 VAC Relay (for electric models Only)
#10-16 x 1/2” TORX Crimptite Screw
L-70 Ground Lug
6-Pin Connector ONLY
Socket Terminal ONLY
Pin Terminal ONLY
6-Pin Connector ONLY
6/15-Position Strain Relief, Not Illustrated
15-Pin Connector ONLY
Pin Terminal ONLY
Socket Terminal ONLY
15-Pin Socket Connector ONLY
Pin/Socket Extraction Tool, Not Illustrated
As required (either 2 or 3).
Telephone: (508) 678-9000
Fax: (508) 678-9447
12
Front Panel/Main Door Assemblies
For Models Mfd. as of August 31, 2000
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
13
Front Panel/Main Door Assemblies
For Models Mfd. as of August 31, 2000
Illus. No.
1
2
3
4
5
*
Part No.
Qty.
6
7
8
9
883081
150683
151012
883082
102214
170730
152014
150120
151010
883083
1
4
1
1
1
1
6
1
1
1
10
11*
12
13
14
15
16
883080
882411
825195
170330
154215
102360
154270
150685
1
1
1
1
2
2
2
1
Description
Door Hinge (black)
1/4-20 x 5/8” Carriage Bolt
#10-32 Acorn Nut (white)
Main Door Handle (black)
30” Door Glass
Door Glass Adhesive (10.3 oz. cartridge)
1/4-20 Free Spin Wash Nut
Main Door Latch Screw (#10-32 dome hex head screw)
#10-32 Acorn Nut
Main Door Assembly Complete (black)
(includes illus. nos. 2 through 10)
Main Door Ring (black)
Extruded Steel Door Gasket
Front Panel Assembly (white)
Friction Door Latch
5/32” Pop Rivet
0.0625 x 0.125 Gasket (black)
1” Spacer
1/4-20 x 1-3/4” Carriage Bolt
Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
14
Front Panel/Main Door Assemblies
For Models Mfd. prior to August 31, 2000
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
15
Front Panel/Main Door Assemblies
For Models Mfd. prior to August 31, 2000
Illus. No.
Part No.
Qty.
1
820012*
1
820014
1
150309
150412
170340
154200
102308
102210
170730
150401
306801
102102
150430
180150
800127*
15
12
3
6
1
1
1
3
9
6
9
1
1
800128
1
800122*
1
800123
1
150430
180155
10
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
*
Description
Right Hand Front Panel Assembly
(includes illus. nos. 1, 4, and 5)
Stainless Steel Right Hand Front Panel Assembly
(includes illus. nos. 1, 4, and 5)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
#10-16 x 3/4” Phillips Round Head Crimptite Screw
3-1/2” Stainless Steel Striker Pad
5/32” Pop Rivet
Door Gasket ONLY (94” length)
20-7/16” Door Glass ONLY
Glass Adhesive (10.3 oz. cartridge)
#10-24 x 1-1/4” Phillips Taptite Screw
Magnet Keeper ONLY
1” x 3/4” x 0.197” Main Door Magnet ONLY
#10 x 1/2” Phillips Pan Head Self-Tapping Machine Screw
35” Granite Main Door Handle ONLY
Main Door Assembly Complete with Gray Cross Handle
(includes illus. nos. 6 through 13)
Stainless Steel Main Door Assembly Complete with Gray Cross Handle
(includes illus. nos. 6 through 13)
Main Door Assembly with Glass and Gasket ONLY
(includes illus. nos. 6, 7, and 13)
Stainless Steel Main Door Assembly with Glass and Gasket ONLY
(includes illus. nos. 6, 7, and 13)
#10 x 1/2” Phillips Pan Head Self-Tapping Machine Screw
35” Cross Main Door Hinge Block ONLY (gray)
Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
16
Main Door Switch Assembly
For Models Mfd. as of August 31, 2000
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
150006
152013
153010
137005
150445
881687
881695
881702
2
2
2
1
4
1
1
1
881700
1
150443
881441
881735
881440
881736
153031
2
1
1
1
1
1
7
8
9
10
American Dryer Corporation
Description
#6-32 x 7/8” Phillips Pan Head Machine Screw
#6-32 Hex Nut
#6 Star Washer
Single-Pole Door Switch
1/4-20 x 3/4” Socket Head Cap Screw
Main Door Switch Housing ONLY (white)
Main Door Switch Housing ONLY (blue)
Main Door Switch with Housing Assembly (white)
(includes illus. nos. 1 through 4 and 6)
Main Door Switch with Housing Assembly (blue)
(includes illus. nos. 1 through 4 and 6)
1/4-20 x 3/4” Stainless Steel Cap Screw
Bottom Hinge Block (white)
Bottom Hinge Block (blue)
Top Hinge Block (white)
Top Hinge Block (blue)
Nylon Washer
88 Currant Road / Fall River, MA 02720-4781
Main Door Switch Assembly
17
For Models Mfd. prior to August 31, 2000
Illus. No.
Part No.
Qty.
1
821098
1
2
3
4
5
6
7
8
821097
102405
150415
102405
137005
121028
180155
122705
122626
1
1
2
1
1
2
1
2
1
Telephone: (508) 678-9000
Description
Main Door Switch Assembly Complete
(includes illus. nos. 1 through 4 and 6)
Main Door Switch Bracket Assembly ONLY
Main Door Switch Actuator ONLY
#10-16 x 1/2” Phillips Round Head Crimptite Screw
Main Door Switch Actuator
Main Door Switch ONLY
1/4” x 0.032 Insulated Terminal ONLY
35” Cross Door Hinge Block ONLY (gray)
Socket Mate to Split Pin
15-Pin Cap Housing ONLY (M/L)
Fax: (508) 678-9447
18
Lint Drawer/Lint Drawer Switch Box Assemblies
For Models Mfd. as of August 30, 1999
Illus. No.
Part No.
Qty.
1
5
802106
802125
122116
122605
122701
122801
882507
1
1
1
1
2
1
1
6
7
8
9
10
11
12
150301
122700
122604
150301
319076
319077
150301
4
2
1
2
1
1
14
2
3
4
American Dryer Corporation
Description
Lint Basket Assembly
Stainless Steel Lint Basket Assembly
Lint Drawer Switch ONLY
4-Pin Socket Connector
Socket Terminal ONLY
Pin/Socket Extraction Tool, Not Illustrated
Lint Drawer Switch Box Assembly Complete
(includes illus. nos. 3 through 6)
For Models Mfd. as of August 30, 1999
#8-18 x 7/16” Phillips Pan Head TEK Screw
Pin Terminal ONLY
4-Pin Connector
#8-18 x 7/16” Phillips Pan Head TEK Screw
Right Hand Divider Panel
Left Hand Divider Panel
#8-18 x 7/16” Phillips Pan Head TEK Screw
88 Currant Road / Fall River, MA 02720-4781
19
Lint Drawer/Lint Drawer Switch Box Assemblies
For Models Mfd. Between December 1, 1994 and August 30, 1999
Illus. No.
Part No.
Qty.
1
881141*
881173
820017
153562
136992
153010
152000
122605
122701
122801
821119
1
1
1
2
1
2
2
2
4
1
1
821116
1
150415
2
2
3
4
5
6
7
8
9
10
*
Description
Lint Drawer Assembly with Safety Switch Actuator Complete
Stainless Steel Lint Drawer Assembly with Safety Switch Actuator
Lint Screen Assembly ONLY
#6-32 x 3/4” Clinch Stud
Lint Drawer Switch ONLY
#6 Star Washer
#6-32 Hex Nut
4-Pin Socket Connector ONLY
Socket Terminal ONLY
Pin/Socket Extraction Tool, Not Illustrated
Lint Drawer Switch Assembly Complete
(includes illus. nos. 3 and 9)
For Models Mfd. prior to August 30, 1999
Lint Drawer Switch Mounting Bracket Assembly ONLY
(includes illus. nos. 3 and 9)
#10-16 x 1/2” Phillips Round Head Crimptite Screw
Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
20
Lint Door Assembly
Illus. No.
Part No.
Qty.
1
824256*
1
820015*
1
820021
117602
150309
117604
1
5
5
8
2
3
4
*
Description
Lint Door Assembly
(includes illus. nos. 1, 2, and 4)
For Models Mfd. as of August 30, 1999
Lint Drawer Assembly
(includes illus. nos. 1, 2, and 4)
For Models Mfd. Between December 1, 1994 and August 30, 1999
Stainless Steel Lint Door Assembly
Gasket (sold by the foot)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Neoprene Sponge Tape (sold by the foot)
Specify color when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Microprocessor Controller (Computer) Temperature Sensor Bracket Assembly
Illus. No.
Part No.
Qty.
1
820022
1
2
3
331295
154007
880251
1
2
1
152000
153010
130302
150000
121028
122605
122701
122604
122700
122801
150301
2
2
1
2
2
1
4
1
4
1
2
4
5
6
7
8
9
10
11
12
13
Telephone: (508) 678-9000
21
Description
Microprocessor Controller (computer) Temperature Sensor Bracket
Assembly Complete
(includes illus. nos. 1 through 10)
Temperature Sensor Bracket ONLY
1/4” Tinnerman Push On Fastener
1/4” Temperature Sensor Probe Assembly
(includes illus. nos. 2, 3, 8, 9, and 10)
#6-32 Hex Nut
#6 Star Washer
225° Large Automatic Reset Thermostat ONLY
#6-32 x 1/4” Round Head Machine Screw
Insulated Terminal
4-Pin Socket Connector ONLY
Socket Terminal ONLY
4-Pin Connector ONLY
Pin Terminal ONLY
Pin/Socket Extraction Tool, Not Illustrated
#8-18 x 7/16” Phillips Pan Head TEK Screw
Fax: (508) 678-9447
22
American Dryer Corporation
Dual Timer Temperature Sensor Bracket Assembly
88 Currant Road / Fall River, MA 02720-4781
Dual Timer Temperature Sensor Bracket Assembly
Illus. No.
Part No.
Qty.
1
801404
1
2
3
4
5
6
7
8
9
10
331295
152000
153010
130302
130107
130109
130101
150001
121028
122605
840062
1
5
5
1
1
1
1
5
8
1
1
122701
122604
122700
122801
150301
840065
4
1
4
1
2
1
11
12
13
14
15
Telephone: (508) 678-9000
23
Description
Dual Timer Sensor Bracket Assembly Complete
(includes illus. nos. 1 through 11 and 15)
Sensor Bracket ONLY
#6-32 Hex Nut
#6 Star Washer
225° Large Thermostat ONLY
160° Large Thermostat ONLY
140° Large Thermostat ONLY
180° Large Thermostat ONLY
#6-32 x 1/2” Phillips Round Head Machine Screw
Insulated Terminal
4-Pin Socket (female) Connector ONLY
Sensor Bracket Harness Assembly
(includes illus. nos. 9 through 11)
Socket Terminal ONLY
4-Pin Connector ONLY
Pin Terminal ONLY
Pin/Socket Extraction Tool, Not Illustrated
#8-18 x 7/16” Phillips Pan Head TEK Screw
Sensor Jumper Harness ONLY
Fax: (508) 678-9447
24
American Dryer Corporation
Basket (Tumbler)/Support Assemblies
88 Currant Road / Fall River, MA 02720-4781
Basket (Tumbler)/Support Assemblies
Illus. No.
Part No.
Qty.
1
820110*
820111*
820020
1
1
1
820052
1
820030
1
820029
1
150413
331105
331106
150500
100910
301700
301701
820115
820116
152011
153026
153011
116006
401010
821002
40
4
4
1
8
4
**
1
1
8
8
8
1
1
1
2
3
4
5
6
7
8
9
10
11
12
13
25
Description
Basket (tumbler) ONLY without Felt Collar
Stainless Steel Basket (tumbler) ONLY without Felt Collar
Basket (tumbler) and Support Assembly Complete
(includes illus. nos. 1 through 12)
Basket (tumbler) and Support Assembly Complete with Rotational Sensor
Option
(includes illus. nos. 1 through 12)
Stainless Steel Basket (tumbler) and Support Assembly Complete
(includes illus. nos. 1 through 12)
Stainless Steel Basket (tumbler) and Support Assembly Complete
with Rotational Sensor Option
(includes illus. nos. 1 through 12)
#10-16 x 1/2” TORX Crimptite Screw
Basket (tumbler) Rib ONLY
Stainless Steel Basket (tumbler) Rib ONLY
5/16-18 x 3/4” Socket Button Head Screw
1/2-13 x 44” Tie Rod
Basket (tumbler) Reinforcing Plate ONLY
Basket (tumbler) Shim ONLY
Basket (tumbler) Support ONLY
Basket (tumbler) Support ONLY with Rotational Sensor Option
1/2-13 Hex Nut
1/2” Lock Washer
9/16” Flat Washer
Felt Collar ONLY
#847 Adhesive for Felt Collar (5 oz. tube)
Rotational Magnet Holder Assembly
(for microprocessor models with optional rotational sensor)
* Felt collar is not included and must be ordered separately.
** As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
26
American Dryer Corporation
Basket (Tumbler) Bearing Mount Assembly
88 Currant Road / Fall River, MA 02720-4781
Basket (Tumbler) Bearing Mount Assembly
Illus. No.
*
Part No.
Qty.
1
2*
3
4
5
6
7
8
9
10
11
12
101137
100135
101136
150602
153016
880204
153016
153015
152010
150600
152005
801102
1
2
1
4
4
1
4
4
4
2
2
1
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
880204
150603
152011
152005
153005
153004
150600
153004
100801
301810
100811
153018
153007
150512
824807
880841
1
2
2
2
2
4
2
2
2
1
2
2
2
2
1
1
27
Description
2-1/4” SFX Bushing
AP-74 V-Belt
20” Basket (tumbler) Pulley
5/8-11 x 3” Hex Head Machine Bolt
5/8” Flat Washer
2-1/4” Pillow Block Bearing ONLY
5/8” Flat Washer
5/8” Lock Washer
5/8-11 Hex Nut
3/8-16 x 1-1/2” Hex Head Machine Bolt
3/8-16 Hex Nut
Basket (tumbler) Bearing Mount Assembly
(includes illus. nos. 4 through 13)
2-1/4” Pillow Block Bearing ONLY
1/2-13 x 3” Square Head Machine Bolt
1/2-13 Hex Nut
3/8-16 Hex Nut
3/8” Lock Washer
3/8” Flat Washer
3/8-16 x 1-1/2” Hex Head Machine Bolt
3/8” Flat Washer
5/8” Retaining Ring
5/8” Hinge Pin
2-1/4” Retaining Ring
1/4” Flat Washer
1/4” Lock Washer
1/4-20 x 1/2” Hex Head Machine Bolt
Rotational Sensor Assembly
Rotational Sensor Mounting Bracket
Replace in matched sets (both belts).
Telephone: (508) 678-9000
Fax: (508) 678-9447
28
American Dryer Corporation
Idler Bearing Mount Assembly
88 Currant Road / Fall River, MA 02720-4781
Idler Bearing Mount Assembly
Illus. No.
*
Part No.
Qty.
1
2
3*
4
5*
6
7
8
9
10
11
12
13
14
15
16
17
101110
101113
100135
101107
100170
101112
100715
301852
880205
153004
150600
150512
150509
153001
152004
153002
801001
1
1
1
1
1
1
1
1
1
4
4
6
2
4
6
8
1
18
19
20
21
22
23
24
311401
880205
153004
153005
152005
103005
153007
152002
1
1
4
4
4
1
6
6
29
Description
1” Bushing
2A3.0 Pulley
AP-74 V-Belt
1” SK Bushing
3V-710 V-Belt
19” Idler Pulley
1/4” x 1/4” x 4-5/8” Key
1” Idler Shaft ONLY
1” Pillow Block Bearing ONLY
3/8” Flat Washer
3/8-16 x 1-1/2” Hex Head Machine Bolt
1/4-20 x 1/2” Hex Head Machine Bolt
5/16-18 x 3” Hex Head Machine Bolt
5/16” Flat Washer
5/16” Hex Nut
5/16” Lock Washer
Idler Bearing Mount Assembly Complete
(includes illus. nos. 8 through 11 and 17 through 24)
Idler Bearing Mount ONLY
1” Pillow Block Bearing ONLY
3/8” Flat Washer
3/8” Lock Washer
3/8-16 Hex Nut
Idler Adjustment Hinge ONLY
1/4” Lock Washer
1/4-20 Hex Nut
Replace in matched sets (both belts).
Telephone: (508) 678-9000
Fax: (508) 678-9447
30
American Dryer Corporation
Basket (Tumbler) Drive Motor Mount Assembly
88 Currant Road / Fall River, MA 02720-4781
Basket (Tumbler) Drive Motor Mount Assembly
Illus. No.
Part No.
Qty.
1
2
101121
101114
101120
100170
120200
150501
153001
100029
1
1
1
1
1
4
4
1
100084
1
800952
800953**
1
1
800955**
1
800956**
1
152004
153002
153001
152004
153002
153001
150619
152005
4
4
4
4
4
4
1
2
3*
4
5
6
7
8
9
10
11
12
13
14
15
16
31
Description
5/8” SK Bushing
2.65” Pulley (for 60 Hz models Only)
3.15” Pulley (for 50 Hz models Only)
3V-710 V-Belt
3/8” x 90° Connector
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Flat Washer
3/4 hp 208/230/460v 3ø 50/60 Hz and 380v 3ø 50 Hz Totally Enclosed,
Fan-Cooled (T.E.F.C.) Motor (56Z frame)
3/4 hp 380v 3ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor
(56Z frame)
Basket (tumbler) Motor Mount ONLY (56Z frame)
3/4 hp 208/230/460v 3ø 60 Hz Basket (tumbler) Motor Mount Assembly
Complete
(includes illus. nos. 1, 2, 4 through 11, 15, and 16)
3/4 hp 208/230/380/460v 3ø 50 Hz Basket (tumbler) Motor Mount
Assembly Complete
(includes illus. nos. 1, 2, 4 through 11, 15, and 16)
3/4 hp 380v 3ø 60 Hz Basket (tumbler) Motor Mount Assembly Complete
(includes illus. nos. 1, 2, 4 through 11, 15, and 16)
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
3/8-16 x 3” Hex Head Machine Bolt
3/8-16 Hex Nut
* Replace in matched sets (both belts).
** Specify voltage when ordering.
IMPORTANT: For voltages higher than 460 VAC, contact the ADC factory for correct part number of
motor mount assembly.
Telephone: (508) 678-9000
Fax: (508) 678-9447
32
Blower Motor Mount Assembly
For Models Mfd. as of July 17, 2000
Illus. No.
Part No.
Qty.
1
2
3
150501
153001
181043
100022
100088
152004
153002
153001
117604
153001
153002
152004
803561
153055
802027
802024
100705
153055
152006
4
4
1
1
1
4
4
4
4’
4
4
4
1
1
1
1
1
1
2
4
5
6
7
8
9
10
11
12
13
14
15
16
American Dryer Corporation
Description
5/16-18 x 1” Hex Head Bolt
5/16” Flat Washer
3 hp Motor 208/230/460/416v 50 Hz
3 hp Motor 380v 3ø 60 Hz
3 hp Motor 575v 3ø 60 Hz
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
Noise Suppressor Tape (sold by the foot)
5/16” Flat Washer
5/16” Lock Washer
5/16-18 Hex Nut
Blower Motor Mount
5/8” Motor Washer
16” Riveted High Flow Impellor 7/8” Bore (60 Hz dryers)
16” Riveted Impellor 7/8” Bore (50 Hz dryers)
3/16” x 3/16” x 1-3/8” Key
5/8” Motor Washer
1/2-20 Left Hand Jam Nut
88 Currant Road / Fall River, MA 02720-4781
33
Impellor/Fan Assembly
For Models Mfd. prior to November 6, 2000
Illus. No.
Part No.
Qty.
1
101194
101152
101147
101148
100706
100811
317400
880879
154326
170512
153004
153005
150601
813002
813023
1
1
1
1
1
2
1
2
4
2
4
4
4
1
1
813024
1
152005
153005
153004
117604
100603
100714
153065
8
8
8
4
1
1
1
153050
1
152006
2
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Telephone: (508) 678-9000
Description
SDS x 1-3/8” Bushing (for 60 Hz models Only)
SH x 1-3/8” Bushing (for 50 Hz models Only)
2B x 4.8 Pulley (for 60 Hz models Only)
2B x 4.0 Pulley (for 50 Hz models Only)
5/16” x 5/16” x 1-3/8” Key
Retaining Ring
Impellor Shaft
1-3/8” Pillow Block Bearing with Setscrews and Grease Fitting
5/16 x 3/8” Allen Setscrew ONLY
1/4-28 N.P.T. Grease Fitting ONLY
3/8” Flat Washer
3/8” Lock Washer
3/8-16 x 2” Hex Head Machine Bolt
Impellor Shaft Mount ONLY
Impellor Assembly Complete (for 60 Hz models Only)
(includes illus. nos. 1 through 9 and 13 through 17)
Impellor Assembly Complete (for 50 Hz models Only)
(includes illus. nos. 1 through 9 and 13 through 17)
3/8-16 Hex Nut
3/8” Lock Washer
3/8” Flat Washer
Neoprene Sponge Tape (sold by the foot)
16” Impellor with 3/4” Bore
3/16” x 3/16” x 1-7/8” Key
1/2” x 1-1/2” Flat Washer
(for models mfd. as of May 19, 1998)
1/2” x 1-1/16” Flat Washer
(for models mfd. prior to May 19, 1998)
1/2-20 Left Hand Jam Nut
Fax: (508) 678-9447
34
Blower Motor Mount Assembly
For Gas Models Mfd. prior to November 6, 2000
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
35
Blower Motor Mount Assembly
For Gas Models Mfd. prior to November 6, 2000
Illus. No.
Part No.
Qty.
1
802253
1
802229
1
813025
1
813049
1
152034
152005
802232
153001
153002
150501
152004
882078
2
4
1
11
11
7
4
1
100043
1
100081
1
100169
101135
101138
100706
1
1
1
1
2
3
4
5
6
7
8
9
10*
11
12
13
*
Description
Adjustable Plate Assembly
(for models mfd. as of July 20, 1998)
Adjustable Plate Assembly
(for models mfd. prior to July 20, 1998)
Blower Motor Mount Assembly Complete
(includes illus. nos. 1 through 13)
For 208-230/460 Volt - 60 Hz and 380/460 Volt - 50 Hz Models ONLY
Blower Motor Mount Assembly Complete
(includes illus. nos. 1 through 13)
For 380 Volt/60 Hz Models ONLY
3/8-16 x 3-1/2” Hex Head Bolt
3/8-16 Hex Nut
Adjustable Angle Assembly
5/16” Flat Washer
5/16” Lock Washer
5/16-18 x 3/4” Hex Head Machine Bolt
5/16-18 Hex Nut
3 hp Blower Motor with Adjusting Plate
(for 208-230/460 volt - 60 Hz and 380/460 volt - 50 Hz models Only)
3 hp Blower Motor
(for 208-230/460 volt - 60 Hz and 380-416 volt - 50 Hz models Only)
For Models Mfd. as of January 7, 1999
3 hp Blower Motor
(for 380 volt/60 Hz models Only)
For Models Mfd. prior to January 7, 1999
5L-350 V-Belt
2B x 5.4 Motor Pulley
SDS x 1-1/8” Bore Bushing
5/16” x 5/16” x 1-3/8” Key
Replace in matched sets (both belts).
Telephone: (508) 678-9000
Fax: (508) 678-9447
36
Blower Motor Mount Assembly
For Electric Models Mfd. prior to November 6, 2000
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
37
Blower Motor Mount Assembly
For Electric Models Mfd. prior to November 6, 2000
Illus. No.
Part No.
Qty.
1
802253
1
802229
1
813028
1
813052
1
813025
1
813049
1
813070
1
813027
1
813051
1
152034
152005
802232
153001
153002
150501
152004
882078
2
4
1
11
11
7
4
1
100043
1
100081
1
100156
100169
100168
101147
101135
101185
101138
100706
1
1
1
1
1
1
1
1
2
3
4
5
6
7
8
9
10*
11
12
13
Telephone: (508) 678-9000
Description
Adjustable Plate Assembly
(for models mfd. as of July 20, 1998)
Adjustable Plate Assembly
(for models mfd. prior to July 20, 1998)
60 kW Electric Blower Motor Mount Assembly Complete
(includes illus. nos. 1 through 13)
For 208-230/460 Volt - 60 Hz and 380/460 Volt - 50 Hz Models ONLY
60 kW Electric Blower Motor Mount Assembly Complete
(includes illus. nos. 1 through 13)
For 380 Volt/60 Hz ONLY
72 kW Electric Blower Motor Mount Assembly Complete
(includes illus. nos. 1 through 13)
For 208-230/460 Volt - 60 Hz and 380/460 Volt - 50 Hz Models ONLY
72 kW Electric Blower Motor Mount Assembly Complete
(includes illus. nos. 1 through 13)
For 380 Volt/60 Hz Models ONLY
80 kW Electric Blower Motor Mount Assembly Complete
(includes illus. nos. 1 through 13)
For 208-230/460 Volt - 60 Hz and 380-416 Volt - 50 Hz Models ONLY
(for models mfd. as of November 2, 1998)
80 kW Electric Blower Motor Mount Assembly Complete
(includes illus. nos. 1 through 13)
For 208-230/460 Volt - 60 Hz and 380/460 Volt - 50 Hz Models ONLY
(for models mfd. prior to November 2, 1998)
80 kW Electric Blower Motor Mount Assembly Complete
(includes illus. nos. 1 through 13)
For 380 Volt/60 Hz Models ONLY
3/8-16 x 3-1/2” Hex Head Machine Bolt
3/8-16 Hex Nut
Adjustable Angle Assembly
5/16” Flat Washer
5/16” Lock Washer
5/16-18 x 3/4” Hex Head Machine Bolt
5/16-18 Hex Nut
3 hp Blower Motor with Adjusting Plate
(for 208-230/460 volt - 60 Hz and 380/460 volt - 50 Hz models Only)
3 hp Blower Motor
(for 208-230/460 volt - 60 Hz and 380-416 volt - 50 Hz models Only)
For Models Mfd. as of January 7, 1999
3 hp Blower Motor (for 380 volt/60 Hz models Only)
For Models Mfd. prior to January 7, 1999
5L-330 V-Belt (for 60 kW electric oven models Only)
5L-350 V-Belt (for 72 kW electric oven models Only)
5L-360 V-Belt (for 80 kW electric oven models Only)
2B x 4.8 Motor Bushing (for 60 kW electric oven models Only)
2B x 5.4 Motor Bushing (for 72 kW electric oven models Only)
2B x 6.2 Motor Bushing (for 80 kW electric oven models Only)
SDS x 1-1/8” Bore Bushing
5/16” x 5/16” x 1-3/8” Key
Fax: (508) 678-9447
38
Blower Motor Mount Assembly
For Steam Models Mfd. prior to November 6, 2000
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
39
Blower Motor Mount Assembly
For Steam Models Mfd. prior to November 6, 2000
Illus. No.
Part No.
Qty.
1
802253
1
802229
1
813069
1
813026
1
813069
1
813050
1
152034
152005
802232
153001
153002
150501
152004
882078
2
4
1
11
11
7
4
1
100043
1
100081
1
100168
101185
101138
100706
1
1
1
1
2
3
4
5
6
7
8
9
10*
11
12
13
*
Description
Adjustable Plate Assembly
(for models mfd. as of July 20, 1998)
Adjustable Plate Assembly
(for models mfd. prior to July 20, 1998)
Blower Motor Mount Assembly Complete
(includes illus. nos. 1 through 13)
For 380-416 Volt/50 Hz Models ONLY
(for models mfd. as of November 2, 1998)
Blower Motor Mount Assembly Complete
(includes illus. nos. 1 through 13)
For 208-230/460 Volt - 60 Hz and 380/460 Volt - 50 Hz Models ONLY
(for models mfd. as of November 2, 1998)
Blower Motor Mount Assembly Complete
(includes illus. nos. 1 through 13)
For 380-416 Volt/50 Hz Models ONLY
(for models mfd. as of January 7, 1999)
Blower Motor Mount Assembly Complete
(includes illus. nos. 1 through 13)
For 380 Volt/60 Hz Models ONLY
(for models mfd. prior to January 7, 1999)
3/8-16 x 3-1/2” Hex Head Bolt
3/8-16 Hex Nut
Adjustable Angle Assembly
5/16” Flat Washer
5/16” Lock Washer
5/16-18 x 3/4” Hex Head Machine Bolt
5/16-18 Hex Nut
3 hp Blower Motor with Adjusting Plate
(for 208-230/460 volt - 60 Hz and 380/460 volt - 50 Hz models Only)
3 hp Blower Motor
(for 208-230/460 volt - 60 Hz and 380-416 volt - 50 Hz models Only)
For Models Mfd. as of January 7, 1999
3 hp Blower Motor
(for 380 volt/60 Hz models Only)
For Models Mfd. prior to January 7, 1999
5L-360 V-Belt
2B x 6.2 Motor Bushing
SDS x 1-1/8” Bore Bushing
5/16” x 5/16” x 1-3/8” Key
Replace in matched sets (both belts).
Telephone: (508) 678-9000
Fax: (508) 678-9447
40
Direct Spark Ignition (DSI) Burner Assembly
For Gas Models ONLY
Illus. No.
Part No.
Qty.
1
880874*
1
880875*
1
2
3
4
5
6
7
8
9
10
11
12
13
820201
331291
150309
142813
141300
142701
142601
142710
142504
142734
150413
331291
140026
1
1
2
1
1
1
1
1
1
1
2
1
1
14
15
16
140411
150309
331291
141208
2
1
1
American Dryer Corporation
Description
Direct Spark Ignition (DSI) Natural Gas Burner Assembly Complete
Less Orifices
(includes illus. nos. 1 through 16 and 18 through 36)
Direct Spark Ignition (DSI) Liquid Propane (L.P.) Gas Burner Assembly
Complete Less Orifices
(includes illus. nos. 1 through 16 and 18 through 38)
Burner Box ONLY
Pipe Bracket
#10-16 x 1/2” Hex Head TEK Crimptite Screw
3/4” x 32-1/2” Pipe
3/4” Union Shut-off
3/4” Closed Nipple
3/4” Union
3/4” x 4” Nipple
3/4” x 90° Elbow
3/4” x 5 1/2” Nipple
#10-16 x 1/2” TORX Crimptite Screw
Gas Valve Pipe Bracket
3/4” Direct Spark Ignition (DSI) 24 VAC Redundant (natural gas) Gas Valve
(3/4” to 1/2” reducing bushing included with gas valve)
24 VAC Gas Valve Liquid Propane (L.P.) Conversion Kit
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Gas Valve Pipe Bracket
3-Port Manifold
88 Currant Road / Fall River, MA 02720-4781
Direct Spark Ignition (DSI) Burner Assembly (continued)
41
For Gas Models ONLY
Illus. No.
17**
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37***
38***
--*
**
***
****
Part No.
Qty.
140832
140819
150309
331288
150309
141110
150309
331287
150309
150309
---------
3
3
4
1
6
3
2
1
2
6
1
331289
150413
331290
880325
305410
880330
150413
151000
130201****
1
1
1
1
1
1
2
2
1
130401
1
150001
142924
142937
332256
150309
880886**
2
1
1
1
5
1
Description
#4 Burner Orifice (natural gas) ONLY
#30 Burner Orifice (liquid propane [L.P.] gas) ONLY
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Manifold Support ONLY
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Burner Tube ONLY
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Burner Tube Support ONLY
#10-16 x 1/2” Hex Head TEK Crimptite Screw
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Sail Switch
(refer to Sail Switch Assembly on page 48)
Burner Box Cover Plate ONLY
#10-16 x 1/2” Phillips Round Head Screw
Ignitor/Flame-Probe Sight Hole Disc ONLY
PSE Ignitor Assembly Kit
Direct Spark Ignition (DSI) Ignitor Gap Feeler Gauge, Not Illustrated
Direct Spark Ignition (DSI) Ignitor High Voltage (HV) Wire/Connector ONLY
#10-16 x 1/2” Phillips Round Head Screw
#6-32 Pal Nut
330° Hi-Limit Small Manual Reset Thermostat ONLY
(for models mfd. as of May 26, 1998)
330° Hi-Limit Thermostat ONLY
(for models mfd. prior to May 26, 1998)
#6-32 x 1/2” Round Head Machine Screw
1” to 3/4” Reducing Coupling
1” BSPT x 3/4” N.P.T. Coupling (for CE models Only)
Liquid Propane (L.P.) Burner Baffle ONLY
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Direct Spark Ignition (DSI) Liquid Propane (L.P.) Conversion Kit
(with 3/4” White-Rodgers gas valve)
Orifices are not included and must be ordered separately.
Consult factory for elevations over 2,000 feet.
For liquid propane (L.P.) gas models ONLY.
ADC Part No. 130201 (330° Hi-Limit Small Manual Reset Thermostat) can and should be used in place
of ADC Part No. 132401 (330° Hi-Limit Thermostat).
Telephone: (508) 678-9000
Fax: (508) 678-9447
42
Direct Spark Ignition (DSI) Module Assembly
For Gas Models Mfd. as of April 1, 2000
Illus. No.
Part No.
Qty.
1
128935
1
2
3
4
5
6
7
8
820100
121400
150522
150301
153010
152000
120102
1
2
3
1
4
4
2
American Dryer Corporation
Description
Direct Spark Ignition (DSI) Module ONLY - 50/60 Hz
(for models mfd. as of April 1, 2000)
Direct Spark Ignition (DSI) Module Mount Assembly ONLY
Universal Bushing
1/4-20 x 1/2” Hex Head TEK Screw
#8-18 x 7/16” Phillips Pan Head TEK Screw
#6 Star Washer
#6-32 Hex Nut
3/8” Straight x 1/2” Knock-Out Connector
88 Currant Road / Fall River, MA 02720-4781
43
Direct Spark Ignition (DSI) Module Assembly
For Gas Models Mfd. prior to April 1, 2000
Illus. No.
1
2
3
4
5
6
7
Part No.
880815
820100
121400
152014
150301
153010
152000
Qty.
1
1
3
3
1
4
4
Telephone: (508) 678-9000
Description
ADC Direct Spark Ignition (DSI) Module ONLY - 50/60 Hz
Direct Spark Ignition (DSI) Module Mount Assembly ONLY
Universal Bushing
1/3-20 Free Spin Wash Nut
#8-18 x 7/16” Phillips Pan Head TEK Screw
#6 Star Washer
#6-32 Hex Nut
Fax: (508) 678-9447
44
Electric Oven Assembly
For Electric Models ONLY
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Electric Oven Assembly
45
For Electric Models ONLY
Illus. No.
Part No.
Qty.
1
803015
1
803002
1
2
3
4
5
6
7
---------*
---------*
802802
150301
130400
150309
802800
802801
1
18
1
2
1
4
1
1
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
154004
150309
802799
122200
150303
105500
319202
154002
150413
803101
120081
120080
152008
121011*
121010*
153009
152008
150413
320823
1
2
1
1
2
1
1
1
8
4
36
36
36
----36
36
14
1
321400
1
---------*
-
27
*
Description
Electric Oven Box ONLY
(for models mfd. as of December 8, 1997)
Electric Oven Box ONLY
(for models mfd. prior to December 8, 1997)
Electric Oven Assembly Complete
Electric Element
Safety Control Bracket ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
290° Hi-Limit ONLY
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Sail Switch Box with Cover and Bracket ONLY
Sail Switch Box Assembly Complete
(includes illus. nos. 7 through 15)
Twin Speed Nut
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Sail Switch Box with Cover and Bracket ONLY
Sail Switch ONLY
#4 x 3/4” Pan Head “A” Machine Screw
Sail Switch Actuator Rod
Sail Switch Damper (flat)
1/8” Push On Fastener
#10-16 x 1/2” TORX Crimptite Screw
Element Cover ONLY
Internal Ceramic Insulator
External Ceramic Insulator
#10-32 Hex Nut
Bus Bar (sold by the foot)
Terminal Lug
#10 Star Washer
#10-32 Hex Nut
#10-16 x 1/2” TORX Crimptite Screw
Electric Wire Burner Cover ONLY
(for models mfd. as of December 8, 1997)
Electric Wire Burner Cover ONLY
(for models mfd. prior to December 8, 1997)
Oven Wire (sold by the foot)
Refer to Electric Oven Component Application Listing on page 54.
Telephone: (508) 678-9000
Fax: (508) 678-9447
46
Electric Oven Relay Box Assembly
208-240 VAC 3ø 50/60 Hz
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
320902
150301
120710
151001
121400
132004
1
12
1
2
2
1
7
8
9
10
11
12
13
14
15
150108
121010
151001
150108
131385
151001
150521
120706
152014
3
1
1
1
2
3
2
1
2
American Dryer Corporation
Description
Electric Oven Relay Box Cover
#8-18 x 7/16” Phillips Pan Head TEK Screw
Power Distribution Block
#8-32 Pal Nut
Universal Bushing
Transformer
(for ALL microprocessor controller [computer] models and timer models)
#8-32 x 1/2” Pan Head Machine Screw
L-70 Terminal Lug
#8-32 Pal Nut
#8-32 x 1/2” Pan Head Machine Screw
Single-Pole Single Throw 112-amp - 24 VAC Relay
#8-32 Pal Nut
1/4-20 x 2” Carriage Bolt
Power Distribution Block
1/4-20 Free Spin Wash Nut
88 Currant Road / Fall River, MA 02720-4781
47
Electric Oven Relay Box Assembly
380-416/480 VAC 3ø 50/60 Hz
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Part No.
Qty.
320902
150301
150300
132004
121400
150108
121010
151001
151001
152014
150108
131385
120706
150501
1
12
3
1
2
3
1
1
3
2
1
1
1
2
Telephone: (508) 678-9000
Description
Electric Oven Relay Box Cover
#8-18 x 7/16” Phillips Pan Head TEK Screw
#10-16 x 1/2” Hex Washer TEK Screw
Transformer (for ALL electric models - 380 VAC through 480 VAC)
Universal Bushing
#8-32 x 1/2” Pan Head Machine Screw
L-70 Terminal Lug
#8-32 Pal Nut
#8-32 Pal Nut
1/4-20 Free Spin Wash Nut
#8-32 x 1/2” Pan Head Machine Screw
Single-Pole Single Throw 112-amp - 24 VAC Relay
Power Distribution Block
1/4-20 x 2” Carriage Bolt
Fax: (508) 678-9447
48
Sail Switch Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
105500
319202
154002
802800
802801
1
1
1
1
1
5
6
7
8
9
10
150309
150303
122200
802799
150413
154004
2
2
1
1
2
1
American Dryer Corporation
Description
Sail Switch Actuator Rod
Sail Switch Damper (flat)
1/8” Push On Fastener
Sail Switch Box Cover and Bracket ONLY
Sail Switch Box Assembly Complete
(includes illus. nos. 1 through 4 and 6 through 10)
#10 x 1/2” Hex Head TEK Crimptite Screw
#4 x 3/4” Pan Head “A” Machine Screw
Sail Switch ONLY
Sail Switch Box Cover and Bracket ONLY
#10-16 x 1/2” TORX Crimptite Screw
Twin Speed Nut
88 Currant Road / Fall River, MA 02720-4781
Steam Damper Assembly
49
For Steam Models ONLY
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
165012
165019
153002
152004
152002
153007
820321
820320
1
1
6
6
4
4
2
1
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
153007
152002
115995
102350
151007
152007
100499
100500
152002
153007
100472
143110
100472
100496
143238
100498
150002
153010
152000
330987
152002
153007
100520
4
4
84
1
1
1
1
1
4
4
1
1
1
1
1
1
2
2
2
1
2
2
1
Telephone: (508) 678-9000
Description
Steam Coil Assembly
Steel Steam Coil Assembly (optional)
5/16” Lock Washer
5/16-18 Hex Nut
1/4-20 Hex Nut
1/4” Lock Washer
Steam Damper Hinge Assembly
Steam Damper Assembly
(includes illus. nos. 7, 10, and 11)
1/4” Lock Washer
1/4-20 Hex Nut
Steam Damper Gasket (sold by the inch)
Steam Damper Foam (68-1/2” length)
7/16-20 Stainless Steel Acorn Nut
7/16-20 Hex Nut
1-1/2” Bore x 3” Stroke Piston
Piston Support Bracket
1/4-20 Hex Nut
1/4” Lock Washer
1/4” x 1/8” Connector
1/4” Tubing (sold by the foot)
1/4” x 1/8” Connector
1/8” Needle Valve
1/8” Close Nipple
3-Way Micro Valve - 24 VAC
#6-32 x 1” Slotted Machine Screw
#6 Star Washer
#6-32 Hex Nut
Micro Valve Support Bracket
1/4-20 Hex Nut
1/4” Lock Washer
1/8” N.P.T. Silencer (muffler)
Fax: (508) 678-9447
50
Microprocessor Reversing Contactor Mounting Panel Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
8
9
11
12
13
332346
121010
150108
153001
153002
152004
120765
132445
132467
132468
882386
132458
137060
137013
---------
1
1
1
2
2
2
2
1
1
1
1
1
1
4
1
14
15
16
17
18
19
150300
150008
120701
151000
150309
120768
4
2
1
2
2
9
10
American Dryer Corporation
Description
Contactor/Relay Mounting Panel ONLY
L-70 Ground Lug
#8-32 x 1/2” Pan Head Machine Screw
5/16” Flat Washer
5/16” Lock Washer
5/16-18 Hex Nut
End Stop/Bracket
3 hp Impellor Contactor
208 Volt Blower Overload (for 208/230/240 volt models Only)
380 Volt Blower Overload (for 380/460/480/575/600 volt models Only)
Reversing (impellor/blower/fan) Contactor - 24 VAC
Reversing Contactor with N.C. Connection
Arc Suppressor (A.S.) Board (3)
Nylon Standoff
Step Down Transformer
(refer to Step Down Transformer Application Listing on page 53)
#10-16 x 1/2” Hex Washer TEK Screw
#6-32 x 1-1/4” Slotted Round Head Machine Screw
4-Position Power Distribution Block
#6-32 Pal Nut
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Din Mounting Rail (sold by the inch)
88 Currant Road / Fall River, MA 02720-4781
51
Dual Timer Reversing Contactor Mounting Panel Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
8
9
11
12
13
14
332346
121010
150108
153001
153002
152004
120765
132445
132467
132468
882386
132458
150108
132198
151001
---------
1
1
1
2
2
2
2
1
1
1
1
1
2
1
2
1
15
16
17
18
19
20
150300
150008
120701
151000
150309
120768
4
2
1
2
2
9
10
Telephone: (508) 678-9000
Description
Contactor/Relay Mounting Panel ONLY
L-70 Ground Lug
#8-32 x 1/2” Phillips Pan Head Machine Screw
5/16” Flat Washer
5/16” Lock Washer
5/16-18 Hex Nut
End Stop/Bracket
3 hp Impellor Contactor
208 Volt Blower Overload (for 208/230/240 volt model Only)
380 Volt Blower Overload (for 380/460/480/575/600 volt model Only)
Reversing (impellor/fan/blower) Contactor - 24 VAC
Reversing Contactor with N.C. Connection
#8-32 x 1/2” Phillips Pan Head Machine Screw
Reversing Timer ONLY (50/60 Hz) - 24 VAC
#8-32 Pal Nut
Step Down Transformer
(refer to Step Down Transformer Application Listing on page 53)
#10-16 x 1/2” Hex Washer TEK Screw
#6-32 x 1-1/4” Slotted Round Head Machine Screw
4-Position Power Distribution Block
#6-32 Pal Nut
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Din Mounting Rail (sold by the inch)
Fax: (508) 678-9447
52
Extended Back Guard Assembly
Illus. No.
Part No.
Qty.
1
2
3
813029
150301
354000
354003
112017
112229
112519
--------112534
1
12
1
1
1
1
1
1
1
4
5
6
7
8
American Dryer Corporation
Description
Top Back Guard
#8-18 x 7/16” Phillips Pan Head TEK Screw
Gas and Electric Lower Back Guard
Steam Lower Back Guard
ADC Name and Address Label
Installation Instructions Label
Routine Maintenance Label
Dryer Data Label
Phase 5 Non-Coin Program Location Label
(for microprocessor models Only)
88 Currant Road / Fall River, MA 02720-4781
53
Step Down Transformer Application Listing
STEP DOWN TRANSFORMER APPLICATION LISTING
(REVERSING RELAY BOX)
HEAT
GAS
STEAM
ELECTRIC
VOLTAGE
WIRE
SERVICE
380
TRANSFORMER PART NUMBER
MICROPROCESSOR
MODELS
TIMER MODELS
3 or 4
132059
132059
416
3 or 4
132062
132062
440
3 or 4
132056
132056
460/480
3 or 4
132053
132053
575
3
132050
132050
380
3 or 4
132059
N/R
416
3 or 4
132062
N/R
460/480
3 or 4
132053
N/R
575
3
N/A
N/A
N/A = Not available. N/R = Not required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
54
Electric Oven Component Application Listing
72 kW OVEN
For Electric Models ONLY
VOLTS
208
230
380
416
480
PHASE
3ø
3ø
3ø
3ø
3ø
WIRE
3
3
3 or 4
3 or 4
3 or 4
815816
815817
815820
815821
815822
QTY.
18
18
18
18
18
SIZE
4 kW
4 kW
4 kW
4 kW
4 kW
120008
120009
120044
120008
120009
OVEN ASSY. PART NO.
ELEMENTS
PART NO.
OVEN WIRE
QTY.*
6’
25’
6’
25’
3’
8’
3’
25’
3’
25’
SIZE
#2
#8
#2
#8
#2
#8
#2
#8
#2
#8
PART NO.
TERMINAL
LUG
QTY.
PART NO.
133302 133100 133302 133100 133302 133100 133302 133100 133302 133100
13
80 kW OVEN
13
6
9
1
9
1
9
1
121010 121012 121010 121012 121010 121012 121010 121012 121010 121012
BUS BAR PART NO. 121011*
2’
2’
3’
3’
3’
VOLTS
208
230
380
416
480
PHASE
3ø
3ø
3ø
3ø
3ø
WIRE
3
3
3 or 4
3 or 4
3 or 4
815823
815824
815810
815826
815827
QTY.
18
18
18
18
18
SIZE
4.5 kW
4.5 kW
4.5 kW
4.5 kW
4.5 kW
PART NO.
120047
120048
120022
120047
120048
OVEN ASSY. PART NO.
ELEMENTS
OVEN WIRE
QTY.*
6’
25’
6’
25’
3’
25’
3’
25’
3’
25’
SIZE
#2
#8
#2
#8
#1
#8
#1
#8
#2
#8
PART NO.
TERMINAL
LUG
QTY.
PART NO.
BUS BAR PART NO. 121011*
*
6
133302 133100 133302 133100 133301 133100 133301 133100 133302 133100
18
18
121010
121010
8’
8’
10
1
18
1
18
1
121010 121012 121010 121012 121010 121012
11’
11’
11’
Sold by the foot.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
55
Electric Oven Power Distribution
72 kW 208-240 VAC 3ø 50/60 Hz
ELECTRIC
SERVICE
QTY.
ELEMENTS
ELEMENT
PART
NUMBER
OVEN
AMPS
208v 3ø 3, 4w
18
120008
240v 3ø 3, 4w
18
120009
Telephone: (508) 678-9000
WIRE SIZE
CONTACTOR
24 VAC
STEP DOWN
TRANSFORMER
A
B
C
200
2
2
8
131385
132004
174
2
2
8
131385
132004
Fax: (508) 678-9447
56
Electric Oven Power Distribution
72 kW 380-416/480 VAC 3ø 50/60 Hz
ELECTRIC
SERVICE
QTY.
ELEMENTS
ELEMENT
PART
NUMBER
OVEN
AMPS
380v 3ø 3, 4w
18
1200044
416v 3ø 3, 4w
18
480v 3ø 3, 4w
18
American Dryer Corporation
WIRE SIZE
CONTACTOR
24 VAC
STEP DOWN
TRANSFORMER
A
B
110
2
8
131385
132004
120008
100
2
8
131385
132004
120009
87
2
8
131385
132004
88 Currant Road / Fall River, MA 02720-4781
57
Electric Oven Power Distribution
80 kW 208-240 VAC 3ø 50/60 Hz
ELECTRIC
SERVICE
QTY.
ELEMENTS
ELEMENT
PART
NUMBER
OVEN
AMPS
208v 3ø 3, 4w
18
1200047
240v 3ø 3, 4w
18
120048
Telephone: (508) 678-9000
WIRE SIZE
CONTACTOR
24 VAC
STEP DOWN
TRANSFORMER
A
B
C
222
2
2
8
131385
132004
193
2
2
8
131385
132004
Fax: (508) 678-9447
58
Electric Oven Power Distribution
80 kW 380-416/480 VAC 3ø 50/60 Hz
ELECTRIC
SERVICE
QTY.
ELEMENTS
ELEMENT
PART
NUMBER
OVEN
AMPS
380v 3ø 3, 4w
18
1200022
416v 3ø 3, 4w
18
480v 3ø 3, 4w
18
American Dryer Corporation
WIRE SIZE
CONTACTOR
24 VAC
STEP DOWN
TRANSFORMER
A
B
122
1
8
131385
132004
120047
111
1
8
131385
132004
120048
96.3
2
8
131385
132004
88 Currant Road / Fall River, MA 02720-4781
Electric Oven Wiring
59
72/80 kW 208-240 VAC 3ø 50/60 Hz
Telephone: (508) 678-9000
Fax: (508) 678-9447
60
Electric Oven Wiring
72/80 kW 380-416/480 VAC 3ø 50/60 Hz
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Sprinkler Pneumatic Assembly
Illus No.
1
2
3
4
5
6
7
8
9
10
Part No.
150524
153007
153018
100556
100462
143283
143151
143100
821532
150522
Qty.
2
2
4
1
1
1
1
5
1
4
Telephone: (508) 678-9000
61
Description
1/4-20 x 2” Long Bolt
1/4” Lock Washer
1/4” Flat Washer
Sprinkler Solenoid Valve, 120 Volt
3/8” Silencer
3/8” Poly x 3/8” M.P.T. Connector, Brass
1/4” Compression x 3/8” M.P.T. Elbow, Brass
1/4” Aluminum Tubing
Sprinkler Solenoid Bracket
1/4-20 x 1/2” Long TEK Screw
Fax: (508) 678-9447
62
American Dryer Corporation
Sprinkler Panel Assembly
88 Currant Road / Fall River, MA 02720-4781
63
Sprinkler Panel Assembly
Illus No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Part No.
Qty.
Description
120768
150300
120766
120758
136033
120756
120761
120750
136050
120999
120721
136039
120754
131409
131405
131408
150106
150108
153000
132091
333002
153000
150108
821761
331499
122424
821990
5-1/2
2
1
7
1
1
9
2
2
4
2
1
1
2
2
2
3
4
4
1
1
2
2
1
1
1
1
35 x 15 mm Din Rail
#10-16 x 1/2” Self Drilling Sheet Metal Screw
End Section
Feed Thru Terminal Block
3-amp 3AG Fuse
1/4” Fuse Terminal Block with Light Emitting Diode (L.E.D.)
4 Position Feed Thru Terminal Block
Ground Terminal Block
3AG 1-amp Fuse Slo-Blo
Blank Marking Tag
Disconnect Fuse Block 3AG
5 x 20 mm 250 mA Med. LAG Fuse
5 x 20 mm Fuse Terminal Block with Light Emitting Diode (L.E.D.)
Hold Down Spring
Double Pole Double Throw Relay
Relay Socket with Screw Terminals
#8-32 x 1” Phillips Head Machine Screw
#8-32 x 1/2” Machine Screw
#8 Flat Washer
208-240 Volt to 120 Volt Transformer
Temperature Controller Mounting Bracket
#8 Flat Washer
#8-32 x 1/2” Machine Screw
Digital Controller Assembly
Sprinkler Electrical Panel
Power Warning Label
J-Box with Hinged Cover
Telephone: (508) 678-9000
Fax: (508) 678-9447
64
American Dryer Corporation
Sprinkler Pipe Assembly
88 Currant Road / Fall River, MA 02720-4781
Sprinkler Pipe Assembly
Illus No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Part No.
Qty.
143556
142579
142602
142579
142548
152002
150522
332429
142584
154350
100565
1
1
1
1
1
2
2
1
1
1
1
881414
1
143227
1
143210
1
143100
152002
150522
332429
142709
154350
142924
142709
142504
142709
142504
102326
142750
321610
150522
142933
153007
152002
142751
5
2
2
1
1
1
1
1
1
1
1
1
1
1
2
1
2
2
1
Telephone: (508) 678-9000
65
Description
1” Ball Valve
3/4” x 2” Nipple
1” Union
3/4” x 2” Nipple
1” x 90º Elbow
1/4-20 Hex Nut
1/4-20 x 1/2” Hex Head TEK Screw
Rear Sprinkler Bracket
1” x 4-1/2” Nipple
1” Pipe U-Bolt
1” Water Valve, Air-Operated
(for models mfd. as of September 1, 1996)
1” Water Valve, Air-Operated
(for models mfd. prior to September 1, 1996)
1/4” Compression x 1/4” M.P.T. Elbow, Brass
(for models mfd. as of July 7, 1996)
1/4” Compression x 1/4” M.P.T. Elbow, Brass
(for models mfd. prior to July 7, 1996)
1/4” Aluminum Tubing
1/4-20 Hex Nut
1/4-20 x 1/2” Hex Head TEK Screw
Rear Sprinkler Bracket
3/4” x 2” Nipple
1” Pipe U-Bolt
1” x 3/4” Reducing Coupling
3/4” x 2” Nipple
3/4” x 90º Elbow
3/4” x 2” Nipple
3/4” x 90º Elbow
Sprinkler Pipe Gasket
3/4” x 46” Nipple with 1/8” Holes
Sprinkler Sensor Support Bracket
1/4-20 x 1/2” Hex Head TEK Screw
3/4” Pipe Strap
1/4” Lock Nut
1/4-20 Hex Nut
3/4” Pipe End Cap
Fax: (508) 678-9447
66
American Dryer Corporation
Relay Panel (Sprinkler Option)
88 Currant Road / Fall River, MA 02720-4781
67
Relay Panel (Sprinkler Option)
Illus No.
Part No.
Qty.
1
2
3
4
5
6
7
8
9
332346
121010
150108
153001
153002
152004
120765
132445
132467
1
1
1
2
2
2
2
1
1
132468
1
10
11
12
13
132444
137060
137013
--------
1
1
4
1
14
15
16
17
18
19
20
150300
150008
120701
151000
150415
120768
132431
132432
4
2
2
2
2
9
1
2
Telephone: (508) 678-9000
Description
Contactor/Relay Mounting Panel
L-70 Ground Lug
#8-32 x 1/2” Pan Head Machine Screw
5/16” Flat Washer
5/16” Lock Washer
5/16-18 Hex Nut
End Stop/Bracket
3 hp Impellor Contactor
208 Volt Blower Overload
(for use on models mfd. for 208/230/240V electric service)
380 Volt Blower Overload
(for use on models mfd. for 380/460/480/575/600V electric service)
3 hp Control Relay with a 110V Coil
Arc Suppressor (A.S.) Board
Nylon Standoff
Step Down Transformer
(refer to Step Down Transformer Application Listing on page 53)
#10-16 x 1/2” Hex Washer TEK Screw
#6-32 x 1/4” Slotted Round Head Machine Screw
4-Position Power Distribution Block
#6-32 Pal Nut
#10-16 x 1/2” Phillips Round Head Crimptite Screw
Din Mounting Rail (sold by the inch)
Reversing Contactor 24 VAC
Contact Replacement Coil 24 VAC
Fax: (508) 678-9447
68
Temperature Sensor Assembly For Sprinkler
Illus No.
Part No.
Qty.
1
2
3
4
5
6
7
8
9
331877
150523
881312
143296
120649
120914
120915
122736
881228
1
2
1
1
1
1
1
3
1
10
11
12
13
152000
120703
122427
150008
2
1
1
2
American Dryer Corporation
Description
Temperature Sensor Mounting Plate
1/4-20 x 3/4” Hex Washer Machine Bolt
Temperature Probe Assembly
1/4” Compression Fitting
1/2” N.P.T. Cord Grip (green)
1/2” Metal Clad “O” Ring
1/2” N.P.T. Lock Nut
18 AWG Ferrule (yellow)
Sprinkler Temperature Probe Assembly
(includes illus. nos. 9 and 12)
#6-32 Hex Nut
6 Position Screw Connector
Caution Label
#6-32 x 1-1/4” Machine Screw
88 Currant Road / Fall River, MA 02720-4781
69
Back Guard Assembly
Illus No.
Part No.
Qty.
1
2
3
4
5
6
7
8
881306
150301
354000
112017
112229
112519
———
112534
1
12
1
1
1
1
1
1
Telephone: (508) 678-9000
Description
Top Back Guard
#8-18 x 7/16” Phillips Pan Head TEK Screw
Gas and Electric Lower Back Guard
ADC Name and Address Label
Installation Instructions Label
Routine Maintenance Label
Dryer Data Label
Phase 5 Non-Coin Program Location Label
(Microprocessor Models Only)
Fax: (508) 678-9447
70
Part No.
112280
114001
114006
120100
120300
120400
120500
120600
120800
120802
120902
120903
121014
121026
121499
121500
122503
122804
121507
880200
Additional Parts Available
Description
“Clean Lint Screen” Label
“CAUTION-Exhausted/Lint Screen” Label
“WARNING - Fire Hazards” Label
3/8” Straight (BX) Connector
3/8” x 45° (BX) Connector
3/8” Red Jacket (BX) Insulator
3/8” Jiffy Clip (BX retainer clip)
3/8” Greenfield (BX)
1/4” In-Line Connector
Red Butt Connector
#74B Wire Nut
Crimp-On Wire Nut
1/4” Insulated (female) Terminal
Tab Receptacle Combination
5-1/2” Harness Tie
8” Harness Tie
Harness Tie Mounting Clip
Manometer (water column test gauge)
Snap Wire Tie Screw Mount
Electrical Terminal (assortment) Kit
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
ADC 450160
11 - 12/04/03-1