Download ADC AD-15 User's Manual
Transcript
AD-15/AD-25 Parts Manual 24 VAC Phase 5 1992 thru June 30, 2002 American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail: [email protected] www.amdry.com 022292 052997WM/tf ADC Part No. 450107 Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer. The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location. FOR YOUR SAFETY POUR VOTRE SÉCURITÉ Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil. We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models. Important For your convenience, log the following information: DATE OF PURCHASE ____________________________ MODEL NO. __________________________________________ RESELLER’S NAME _______________________________________________________________________________________ Serial Number(s) ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly. The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering. “IMPORTANT NOTE TO PURCHASER” Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer. Table of Contents AD-15 Control Door Assembly Without Trim For OPL (Non-Coin) Models Mfd. as of July 19, 1999 ....................................................................3 AD-25 Control Door Assembly Without Trim For OPL (Non-Coin) Models Mfd. as of November 11, 1998 ..........................................................4 AD-15 High Security Control Door Assembly For ALL Coin Models For OPL Models Mfd. prior to July 19, 1999 ...................................................................................5 AD-25 High Security Control Door Assembly For ALL Coin Models For OPL Models Mfd. prior to November 11, 1998 .........................................................................6 Phase 5 Coin Microprocessor Control Panel Assembly ...........................................................................7 Phase 5 OPL Microprocessor Control Panel Assembly ...........................................................................8 Phase 5 Coin and OPL Microprocessor Control Box Assembly ...............................................................9 AD-15/AD-25 Control Vault Assembly.................................................................................................10 Dual Timer “Tap Touch” Controls For Models Mfd. as of November 3, 2000 ..................................................................................... 11 Dual Timer Control Panel Assembly For Models Mfd. prior to November 3, 2000 .................................................................................12 Non-Microprocessor Coin Meter Control Panel Assembly For Models Mfd. as of January 25, 2002 ........................................................................................13 Non-Microprocessor Coin Meter Control Panel Assembly For Models Mfd. prior to January 25, 2002 ....................................................................................14 Non-Microprocessor Control Box Assembly ........................................................................................15 Slide Meter Case Assembly For Models Mfd. as of March 13, 2001 .........................................................................................16 Slide Meter Case Assembly For Models Mfd. Between January 13, 1995 and March 13, 2001 .................................................17 Slide Meter Case Assembly For Models Mfd. prior to January 13, 1995 ....................................................................................18 Main Door “Steel” Assembly ................................................................................................................19 Plastic Main Door Assembly .................................................................................................................20 Main Door Switch Assembly Cold Rolled Steel (CRS) Door .................................................................21 Main Door Switch Assembly For Models with Plastic Doors........................................................................................................22 AD-15/AD-25 Cold Rolled Steel (CRS) Door Front Panel ...................................................................23 AD-15/AD-25 Front Panel Assembly For Models with Plastic Doors........................................................................................................24 AD-15 Basket (Tumbler)/Support Assembly .........................................................................................25 AD-25 Basket (Tumbler)/Support Assembly .........................................................................................26 Drop Lint Door Assembly Without Trim For AD-15 OPL Models Mfd. as of July 24, 1999 For AD-25 OPL Models Mfd. as of November 11, 1998 ...............................................................27 Drop Lint Door Assembly With Trim For ALL Coin Models For AD-15 OPL Models Mfd. prior to July 24, 1999 For AD-25 OPL Models Mfd. prior to November 11, 1998 .....................................................28, 29 AD-15/AD-25 Lint Trap Assembly .......................................................................................................30 AD-15/AD-25 Basket (Tumbler) Bearing Assembly ..............................................................................31 AD-15/AD-25 Idler Bearing Assembly ...........................................................................................32, 33 AD-15 Motor Mount Assembly ......................................................................................................34, 35 AD-25 Motor Mount Assembly ......................................................................................................36, 37 Sensor Bracket Assemblies ............................................................................................................38, 39 ADG-15 Direct Spark Ignition (DSI) Burner Assembly For Models Mfd. as of May 20, 2000 ......................................................................................40, 41 ADG-25 Direct Spark Ignition (DSI) Burner Assembly For Models Mfd. as of May 20, 2000 ......................................................................................42, 43 ADG-15/ADG-25 Direct Spark Ignition (DSI) Burner Assembly For Models Mfd. prior to May 20, 2000 ..................................................................................44, 45 ADE-15/ADE-25 Electric Oven Assembly......................................................................................46, 47 ADG-15/ADG-25 DSI Johnson Control Module Assembly For Models Mfd. as of May 20, 2000 ............................................................................................48 ADG-15/ADG-25 Sail Switch/Hi-Limit Assemblies...............................................................................49 Single-Phase (1ø) Motor, Electric Relay Panel Assembly .......................................................................50 3-Phase (3ø) Motor, Electric Relay Panel Assembly ..............................................................................51 Slide Meter Control Box Assembly For Models Mfd. as of January 13, 1995 ........................................................................................52 Slide Meter Control Box Assembly For Models Mfd. prior to January 13, 1995 ....................................................................................53 ADS-15/ADS-25 Steam Coil/Air-Operated Steam Damper Assembly ............................................54, 55 ADS-15/ADS-25 Steam Coil/Mechanical Steam Damper Assembly ...............................................56, 57 AD-15/AD-25 Outer Top/Back Guard Assembly .................................................................................58 ADG-15/ADG-25 Heat Reclaimer Assembly ........................................................................................59 Microprocessor Coin Acceptors Listing ................................................................................................60 Coin Meter Replacement Parts .............................................................................................................61 AD-15/AD-25 Transformer Usage Listing for Gas/Steam Dryers...........................................................62 ADE-15/ADE-25 Transformer Usage Listing for Electric Dryers ...........................................................63 ADE-15/ADE-25 Electric Oven Component Application Charts ...........................................................64 AD-15/AD-25 DSI Burner Assembly Specifications .............................................................................65 Additional Parts Available ..................................................................................................................66 AD-15 Control Door Assembly Without Trim 3 For OPL (Non-Coin) Models Mfd. as of July 19, 1999 Illus. No. Part No. Qty. 1 2 881053 870011 883097* 1 1 1 3 4 5 6 7 8 117604 150300 102603 102601 102502 882541 4 4 1 1 1 2 * Description ADC Logo ONLY (with double adhesive tape) Logo Double Tape Kit Control Door (includes illus. nos. 2 and 3) Neoprene Sponge Tape (sold by the foot) #10-16 x 1/2” Hex Washer TEK Screw Control Door Rod Support Catch Control Door Retainer Clip Control Door Support Rod Spring Turn Latch Assembly Specify color when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 4 AD-25 Control Door Assembly Without Trim For OPL (Non-Coin) Models Mfd. as of November 11, 1998 Illus. No. Part No. Qty. 1 2 881053 870011 882265* 1 1 1 3 4 5 6 7 8 117604 150300 102603 102601 102502 882541 4 4 1 1 1 2 * Description ADC Logo ONLY (with double adhesive tape) Logo Double Tape Kit Control Door (includes illus. nos. 2 and 3) Neoprene Sponge Tape (sold by the foot) #10-16 x 1/2” Hex Washer TEK Screw Control Door Rod Support Catch Control Door Retainer Clip Control Door Support Rod Spring Turn Latch Assembly Specify color when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 5 AD-15 High Security Control Door Assembly For ALL Coin Models For OPL Models Mfd. prior to July 19, 1999 Illus. No. Part No. Qty. 1 160015 160104 160011 160016 881053 870011 800023* 1 1 1 1 1 1 1 883265* 1 800140 1 801197 1 180200 180300 117603 150201 150300 102603 102601 102502 1 1 3 5 4 1 1 1 2 3 4 5 6 7 8 9 10 11 * Description High Security MK-100 Lock Assembly with Key (for coin models Only) MK-100 Key ONLY Special Dummy Lock ONLY (for non-coin models Only) Lock Cam ONLY ADC Logo with Tape Double Sided Tape Kit AD-15 High Security Control Door Assembly with Gray Trim (includes illus. nos. 4 through 7) AD-15 High Security Control Door Assembly with Black Trim (includes illus. nos. 4 through 7) AD-15 High Security Stainless Steel Control Door Assembly with Gray Trim Less Lock (includes illus. nos. 4 through 7) AD-15 High Security Stainless Steel Control Door with Black Trim (includes illus. nos. 4 through 7) AD-15 Top Gray Trim Strip with Lock Hole AD-15 Top Black Trim Strip with Lock Hole Suppressor Tape/Gasket (sold by the foot) #10-32 x 1/4” Phillips Round Head Machine Screw #10-16 x 1/2” Hex Washer TEK Screw Control Door Rod Support Catch Control Door Rod Retainer Clip Control Door Support Rod Specify color when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 6 AD-25 High Security Control Door Assembly For ALL Coin Models For OPL Models Mfd. prior to November 11, 1998 Illus. No. Part No. Qty. 1 160015 160104 160017 160016 881053 870011 800022* 1 1 1 1 1 1 1 800141 1 883266* 1 882686 1 6 180201 180301 117603 1 1 3 7 8 9 10 11 150201 150300 102600 102601 102502 5 4 1 1 1 2 3 4 5 * Description High Security MK-100 Lock Assembly with Key (for coin models Only) MK-100 Key ONLY Special Dummy Lock ONLY (for non-coin models Only) Lock Cam ONLY ADC Logo with Tape Double Sided Tape Kit AD-25 High Security Control Door Assembly with Gray Trim (includes illus. nos. 4 through 7) AD-25 High Security Stainless Steel Control Door Assembly with Gray Trim Less Lock (includes illus. nos. 4 through 7) AD-25 High Security Control Door Assembly with Black Trim (includes illus. nos. 4 through 7) AD-25 High Security Stainless Steel Control Door Assembly with Black Trim (includes illus. nos. 4 through 7) AD-25 Top Gray Trim Strip with Lock Hole AD-25 Top Black Trim Strip with Lock Hole Suppressor Tape/Gasket (sold by the foot) For Models Mfd. as of February 6, 1995 #10-32 x 1/4” Phillips Round Head Machine Screw #10-16 x 1/2” Hex Washer TEK Screw Control Door Rod Support Catch Control Door Rod Retainer Clip Control Door Support Rod Specify color when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 7 Phase 5 Coin Microprocessor Control Panel Assembly Illus. No. Part No. Qty. 1 2 112526 883537 1 1 883538 1 883582 1 883581 1 883539 1 883540 1 883580 1 883579 1 5 6 7 150309 137213 824998 153010 150005 -------- 1 1 1 2 2 1 8 -------- 1 9 10 137023 137021 880772 122800 136048 1 3 1 1 1 3 4 11 IMPORTANT: Description Coin Keyboard Label Assembly Phase 5 Coin Control Panel Assembly (includes illus. nos. 1, 2, and 4 through 6) (for models mfd. as of June 25, 2002) Phase 5 Coin Control Panel Assembly with Battery Option (includes illus. nos. 1, 2, and 4 through 6) (for models mfd. as of June 25, 2002) Phase 5 Coin Control Panel Assembly with Battery Option (includes illus. nos. 1, 2, and 4 through 6) (for models mfd. prior to June 25, 2002) Phase 5 Coin Control Panel Assembly (includes illus. nos. 1, 2, and 4 through 6) (for models mfd. prior to June 25, 2002) Coin Control Panel ONLY (for models mfd. as of June 25, 2002) Coin Control Panel ONLY with Battery Bracket (for models mfd. as of June 25, 2002) Coin Control Panel ONLY (for models mfd. prior to June 25, 2002) Coin Control Panel ONLY with Battery Bracket (for models mfd. prior to June 25, 2002) #10-16 x 1/2” Hex Head TEK Crimptite Screw Phase 5 Coin Controller ONLY Phase 5 Battery Clip #6 Star Washer #6-32 x 1/4” Phillips Round Head Machine Screw Microprocessor Coin Acceptor (refer to Microprocessor Coin Acceptors Listing on page 60) Optic Switch ONLY (refer to Microprocessor Coin Acceptors Listing on page 60) Optic Switch Connector ONLY Microprocessor Socket ONLY Single Coin Optical Switch Harness Microprocessor (female) Pin Extraction Tool 1/8-Amp (Slo-Blo) Fuse ONLY Check label on computer chip to verify correct part number for controller. Telephone: (508) 678-9000 Fax: (508) 678-9447 8 Phase 5 OPL Microprocessor Control Panel Assembly Illus. No. Part No. Qty. 1 112535 112276 112275 1 1 1 112277 1 112278 1 801255 801256 801206 1 1 1 801207 1 137222 137231 824998 153010 150005 150300 1 1 1 2 2 1 882541 1 136048 1 2 3 4 5 6 7 Description OPL English Keyboard Label Assembly OPL Stick-On Labels (English Only)...Not Illustrated 3-Language OPL Stick-On Labels...Not Illustrated (Spanish, Italian, and Hebrew) 3-Language OPL Stick-On Labels...Not Illustrated (English, Spanish, and Hebrew) 5-Language OPL Stick-On Labels...Not Illustrated (Italian, Dutch, French, German, and Chinese) Phase 5 Microprocessor Control Panel ONLY Phase 5 Microprocessor Control Panel ONLY with Battery Bracket Phase 5 OPL Non-Reversing Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 6) Phase 5 OPL Reversing Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 6) Phase 5 OPL Non-Reversing Controller ONLY Phase 5 OPL Reversing Controller ONLY Phase 5 Battery Clip #6 Star Washer #6-32 x 1/4” Phillips Round Head Machine Screw #10-16 x 1/2” Hex Washer TEK Screw (for models mfd. as of March 1, 1994) Spring Turn Latch (2-piece)...Not Illustrated (for models mfd. prior to March 1, 1994) 1/8-Amp (Slo-Blo) Fuse IMPORTANT: Check label on computer chip to verify correct part number for controller. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Phase 5 Coin and OPL Microprocessor Control Box Assembly Illus. No. * Part No. Qty. 1 -------- 1 2 3 4 5 6 7 8 9 10 11 150300 120715 150002 151000 136057 150301 136008 122641 122706 131931 2 1 2 2 * * * 1 * 1 12 13 150309 137035 2 1 14 323583 1 15 16 150300 132002 2 1 17 150300 2 9 Description 24 VAC Control Voltage Transformer (refer to AD-15/AD-25 Transformer Usage Listing for Gas/Steam Dryers on page 62) (refer to AD-15/AD-25 Transformer Usage Listing for Electric Dryers on page 63) #10-16 x 1/2” Hex Washer TEK Screw 30-Position Terminal Block #6-32 x 1” Phillips Round Head Screw #6-32 Pal Nut 1/2-Amp (Slo-Blo) Fuse #8-18 x 7/16” Self Drilling Screw Fuse Block/Strip ONLY 15-Pin Microprocessor Connector Sockets ONLY Steam Valve Relay - 24 VAC (for mechanical steam damper models Only) #10-16 x 1/2” Hex Head TEK Crimptite Screw Motor Capacitor (for mechanical steam damper models Only) Capacitor Bracket (for mechanical steam damper models Only) #10-16 x 1/2” Hex Washer TEK Screw Transformer (for mechanical steam damper models 208 volts and higher) #10-16 x 1/2” Hex Washer TEK Screw As required. Telephone: (508) 678-9000 Fax: (508) 678-9447 10 AD-15/AD-25 Control Vault Assembly Illus. No. Part No. Qty. 1 802112 1 802117 802110 1 1 4 802115 160028 875061 160105* 802020 1 1 1 1 1 5 6 7 8 9 802019 125915 802018 152014 102502 102601 102603 1 1 1 4 1 1 1 2 3 * Description Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 6) Microprocessor Coin Vault ONLY Non-Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 6) Non-Microprocessor Coin Vault ONLY Cam for 1/4 Turn Lock ONLY 1/4 Turn Lock with Key and Cam 1/4 Turn Mer-Pel Key ONLY 1/4 Turn Coin Box Assembly (includes illus. nos. 2 through 5) 1/4 Turn Coin Box ONLY without Faceplate High Security (Greenwald) Coin Box ONLY with Key 1/4 Turn Coin Box Faceplate ONLY 1/4-20 Free Spin Wash Nut Control Door Support Rod Control Door Rod Retainer Clip Control Door Rod Catch Specify key number when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Dual Timer “Tap Touch” Controls 11 For Models Mfd. as of November 3, 2000 Illus. No. Part No. Qty. 1 2 3 4 5 6 7 8 124030 124025 824175 122301 131932 120730 151000 882903 1 1 1 1 3 1 6 1 9 10 11 12 13 14 15 850392 153010 152000 150207 150110 112563 124104 124105 2 3 2 4 1 1 1 Telephone: (508) 678-9000 Description 15 Minute Timer - 24 VAC 60 Minute Timer - 24 VAC Red Pilot Light - 24 VAC “Tap Touch” Switch Relay SPST 24v 30-Position Terminal Block #6-32 Pal Nut Dual Timer Panel Complete (includes illus. nos. 1 through 15) Dual Timer Panel ONLY #6 Star Washer #6-32 Hex Nut #10-24 x 1/2” Phillips Pan Head Machine Screw #8-32 x 1/4” Phillips Round Head Machine Screw Dual Timer Panel Overlay Pure Touch Knob with Red Pointer Pure Touch Knob with Blue Pointer Fax: (508) 678-9447 12 Dual Timer Control Panel Assembly For Models Mfd. prior to November 3, 2000 Illus. No. Part No. Qty. 1 2 3 123005 122400 824015 1 1 1 4 5 6 7 8 9 10 11 12 13 14 15 16 800051 131917 150207 154001 152000 153010 120713 150002 150110 150001 131931 151000 112050 150415 1 1 2 2 2 2 1 2 4 2 1 2 1 1 882541 1 124103 124025 124030 122602 122700 122801 2 1 1 1 8 1 17 18 19 20 21 -- American Dryer Corporation Description Red Indicator Light - 24 VAC Rocker Heat Selector Switch Dual Timer Control Panel Assembly Complete - 24 VAC (includes illus. nos. 1 through 21) Dual Timer Control Panel ONLY Push-To-Start Relay - 24 VAC #10-24 x 1/2” Round Head Machine Screw #10-24 Speed Nut #6-32 Hex Nut #6 Star Washer 18-Position Terminal Block #6-32 x 1” Phillips Round Head Machine Screw #8-32 x 1/4” Phillips Machine Screw #6-32 x 1/2” Phillips Round Head Machine Screw Dual Timer Relay - 24 VAC #6-32 Pal Nut Dual Timer Label ONLY #10-16 x 1/2” Phillips Round Head Crimptite Screw (for models mfd. as of March 1, 1994) Spring Turn Latch (2-piece)...Not Illustrated (for models mfd. prior to March 1, 1994) Arrow Timer Knob 60 Minute Timer - 24 VAC 15 Minute Timer - 24 VAC 9-Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool 88 Currant Road / Fall River, MA 02720-4781 13 Non-Microprocessor Coin Meter Control Panel Assembly For Models Mfd. as of January 25, 2002 Illus. No. Part No. Qty. 1 2 3 123005 122400 824172 1 1 1 824109 131932 154001 123225 125601 153010 152016 120712 150300 122602 122700 122801 1 1 2 1 1 2 2 1 1 1 7 1 4 5 6 7 8 9 10 11 12 --- Description Red Indicator Light - 24 VAC Rocker Heat Selector Switch Coin Meter Control Panel Assembly Less Coin Meter (includes illus. nos. 2 through 5, 7, and 8) Coin Meter Control Panel ONLY 24 VAC Relay #10-24 Speed Nut (used on P/N 131932, 24 VAC Relay) Green Push-To-Start Button 25¢ Coin Meter - 24 VAC (specify timing) #6 Star Washer Hex Nut 12-Position Terminal Block #10-16 x 1/2” Hex Washer TEK Screw 9-Pin Connector Pin Terminal ONLY Pin Extraction Tool NOTE: For Coin Meter Replacement Parts refer to page 61. Telephone: (508) 678-9000 Fax: (508) 678-9447 14 Non-Microprocessor Coin Meter Control Panel Assembly For Models Mfd. prior to January 25, 2002 Illus. No. Part No. Qty. 1 2 3 123005 122400 824020 1 1 1 4 5 6 7* 8 9 10 800054 131917 150207 154001 125601 150303 120712 150309 1 1 2 2 1 2 1 1 882541 1 122602 122700 122801 1 9 1 11 12 --* Description Red Indicator Light - 24 VAC Rocker Heat Selector Switch Coin Meter Control Panel Assembly Complete - 24 VAC (includes illus. nos. 1 through 6 and 8 through 12) Coin Meter Control Panel ONLY Push-To-Start Relay - 24 VAC #10-24 x 1/2” Round Head Machine Screw #10-24 Speed Nut 25¢ Coin Meter - 24 VAC (specify timing) #4 x 3/4” Pan Head “A” Screw 12-Position Terminal Block #10-16 x 1/2” Hex Head TEK Crimptite Screw (for models mfd. as of March 3, 1994) Spring Turn Latch (2-piece)...Not Illustrated (for models mfd. as of March 3, 1994) 9-Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool Consult factory for coin meters not listed. NOTE: For Coin Meter Replacement Parts refer to page 61. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Non-Microprocessor Control Box Assembly Illus. No. Part No. Qty. 1 2 3 4 5 6 122603 122701 122801 315010 150300 150300 --------- 1 9 1 1 2 2 1 7 8 9 10** 11 12 13 14 15 16 17 18 19 150309 131931 136008 136057 150301 150002 120715 151000 132002 150300 137035 323583 150300 2 1 * * * 2 1 2 1 2 1 1 2 15 Description 9-Pin Socket Connector Socket Terminal ONLY Pin/Socket Extraction Tool 9-Pin Connector Bracket #10-16 x 1/2” Hex Washer TEK Screw #10-16 x 1/2” Hex Washer TEK Screw 24 VAC Control Voltage Transformer (refer to AD-15/AD-25 Transformer Usage Listing for Gas/Steam Dryers on page 62) (refer to ADE-15/ADE-25 Transformer Usage Listing for Electric Dryers on page 63) #10-16 x 1/2” Hex Head TEK Crimptite Screw Steam Valve Relay (for mechanical steam damper models Only) - 24 VAC Fuse Block/Strip ONLY 1/2-Amp (Slo-Blo) Fuse ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw #6-32 x 1” Phillips Round Head Machine Screw 30-Position Terminal Block #6-32 Pal Nut Transformer (for mechanical steam damper 208 VAC and higher) #10-16 x 1/2” Hex Washer TEK Screw Motor Capacitor (for mechanical steam damper models Only) Capacitor Bracket (for mechanical steam damper models Only) #10-16 x 1/2” Hex Washer TEK Screw * As required. ** Check fuse on dryer for verification. Telephone: (508) 678-9000 Fax: (508) 678-9447 16 Slide Meter Case Assembly For Models Mfd. as of March 13, 2001 Illus. No. 1* 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 * Part No. Qty. 160199 160099 125908 122643 122642 152014 122631 131917 883034 883035 883036 122603 122701 883165 154203 801700 1 1 1 9 1 4 2 1 1 1 1 1 21 1 6 1 315404 -------123005 122400 -------801701 102502 102601 102603 883044 883038 883039 883040 1 1 1 1 1 1 1 1 1 1 1 1 1 Description Key ONLY for Slide Meter Lock Lock/Key/Cam and Hardware Slide Meter Accumulator - 24 VAC Mate-N-Lock Pin ONLY 9-Position Mini-Universal Socket 1/4-20 Free Spin Wash Nut 6-Position Connector (mate-n-lock) Push-To Start Relay - 24 VAC White Slide Meter Case Coral Blue Slide Meter Case Ivory Slide Meter Case 9-Position Connector (mate-n-lock) Socket Terminal ONLY Slide Meter Case ONLY with Door Less Lock 1/4” Drive Rivet Slide Meter Extension ONLY with Mirror (includes illus. nos. 14 and 15) Stainless Steel Mirror ONLY Typical Slide Meter Coin Chute (not available from ADC) Red Indicator Light - 24 VAC Rocker Heat Selector Switch Typical Slide Meter Coin Box (not available from ADC) Slide Meter Case Mounting Plate Control Door Support Rod Control Door Rod Retainer Clip Control Door Support Rod Catch Slide Meter Extension White Slide Meter Timer Door Coral Blue Slide Meter Timer Door Ivory Slide Meter Timer Door Specify key number when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 17 Slide Meter Case Assembly For Models Mfd. Between January 13, 1995 and March 13, 2001 Illus. No. * Part No. Qty. 1* 2 3 4 5 6 7 8 9 10 11 12 13 14 160199 160099 125908 122643 122642 152014 122631 131917 881100 122603 122701 883165 154203 801700 1 1 1 9 1 4 2 1 1 1 21 1 6 1 15 16 17 18 19 20 21 22 23 24 315404 -------123005 122400 -------801701 102502 102601 102603 883044 1 1 1 1 1 1 1 1 1 1 Description Key ONLY for Slide Meter Lock Lock/Key/Cam and Hardware Slide Meter Accumulator - 24 VAC Mate-N-Lock Pin ONLY 9-Position Mini-Universal Socket 1/4-20 Free Spin Wash Nut 6-Position Connector (mate-n-lock) Push-To Start Relay - 24 VAC Slide Meter Modular J-Box Assembly 9-Position Connector (mate-n-lock) Socket Terminal ONLY Slide Meter Case ONLY with Door Less Lock 1/4” Drive Rivet Slide Meter Extension ONLY with Mirror (includes illus. nos. 14 and 15) Stainless Steel Mirror ONLY Typical Slide Meter Coin Chute (not available from ADC) Red Indicator Light - 24 VAC Rocker Heat Selector Switch Typical Slide Meter Coin Box (not available from ADC) Slide Meter Case Mounting Plate Control Door Support Rod Control Door Rod Retainer Clip Control Door Support Rod Catch Slide Meter Extension Specify key number when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 18 Slide Meter Case Assembly For Models Mfd. prior to January 13, 1995 Illus. No. * Part No. Qty. 1* 2 3 4 5 6 7 160199 160099 125908 152014 883165 154203 801700 1 1 1 4 1 6 1 8 9 10 11 12 13 14 15 16 17 315404 --------------801701 102502 102601 102600 122400 123005 131917 1 1 1 1 1 1 1 1 1 1 Description Key ONLY for Slide Meter Lock Lock/Key/Cam and Hardware Slide Meter Accumulator - 24 VAC 1/4-20 Free Spin Wash Nut Slide Meter Case ONLY with Door Less Lock 1/4” Drive Rivet Slide Meter Extension ONLY with Mirror (includes illus. nos. 14 and 15) Stainless Steel Mirror ONLY Typical Slide Meter Coin Chute (not available from ADC) Typical Slide Meter Coin Box (not available from ADC) Slide Meter Case Mounting Plate Control Door Support Rod Control Door Rod Retainer Clip Control Door Support Rod Catch Rocker Heat Selector Switch Red Indicator Light - 24 VAC Push-To-Start Relay - 24 VAC Specify key number when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 19 Main Door “Steel” Assembly Illus. No. Part No. Qty. 1 881150 1 2 3 102354 170731 881152 1 1 1 4 5 6 150445 153031 881151 2 1 1 7 150445 150443 150683 152014 151010 150120 150683 152014 881210 102211 102218 170731 151013 2 2 3 3 1 1 3 3 1 1 1 1 4 8 9 10 11 12 13 14 15 16 Telephone: (508) 678-9000 Description Black Main Door Assembly Complete (includes illus. nos. 1, 2, and 8 through 15) Door Gasket Black Glass Adhesive (10.3 oz. cartridge) Black Top Hinge Block Assembly (includes illus. nos. 3 and 4) 1/4-20 x 3/4” Black Cap Head Setscrew 1/4” Nylon Washer Black Bottom Hinge Block Assembly (includes illus. nos. 5 through 7) 1/4-20 x 3/4” Black Cap Head Setscrew 1/4-20 x 3/4” Stainless Steel Cap Head Setscrew 1/4-20 x 5/8” Black Carriage Bolt 1/4-20 Free Spin Wash Nut #10-32 Black Hex Acorn Nut Door Latch Screw 1/4-20 x 5/8” Black Carriage Bolt 1/4-20 Free Spin Wash Nut Black Main Door Handle ONLY Door Glass without Holes 20-7/16” Door Glass with 4 Holes for Mechanical Fasteners Black Glass Adhesive (10.3 oz. cartridge) #10-32 Black Nylon Acorn Nut Fax: (508) 678-9447 20 Plastic Main Door Assembly Illus. No. Part No. Qty. 1 881422 1 2 3 4 5 6 800448 150410 152014 102349 102212 170730 150448 170319 150431 1 4 4 1 1 1 4 4 1 7 8 9 American Dryer Corporation Description Black Plastic Main Door Assembly Complete with Mechanical Fasteners (includes illus. nos. 1 and 5 through 9) 12-1/2” Stainless Steel Main Door Hinge Assembly #10-24 x 3/8” Phillips Pan Head Taptite Screw 1/4-20 Free Spin Wash Nut Main Door Gasket 20-7/16” Door Glass with (4) Holes Main Door Gasket/Glass Adhesive (10.3 oz. cartridge) 1/2” Stainless Steel Flat Head Allen Screw Door Glass (nylon) Spacer Main Door Latch Screw (#10 x 7/16” dome hex head screw) 88 Currant Road / Fall River, MA 02720-4781 Main Door Switch Assembly Cold Rolled Steel (CRS) Door Illus. No. Part No. Qty. 1 2 3 4 5 6 7 150006 152013 153010 137005 122636 881211 150301 2 2 2 1 2 1 2 Telephone: (508) 678-9000 21 Description #6-32 x 7/8” Phillips Pan Head Machine Screw #6-32 Hex Nut #6 Star Washer Single-Pole Door Switch Flag Terminal Main Door Switch Housing #8-18 x 7/16” Phillips Pan Head TEK Screw Fax: (508) 678-9447 22 Main Door Switch Assembly For Models with Plastic Doors Illus. No. Part No. Qty. 1 2 3 4 5 6 152013 153008 137005 121028 154281 800448 2 2 1 2 2 1 7 8 9 10 153565 313218 150201 121405 2 1 2 1 American Dryer Corporation Description #6-32 Hex Nut #6 Lock Washer Single-Pole Door Switch Insulated Female Terminal 3/8” Standard Nylon Spacers 12-1/2” Stainless Steel Main Door Hinge Assembly (includes illus. nos. 6 and 7) #6-32 x 1” Self-Clinching Stud Main Door Switch Housing #10-32 x 1/4” Phillips Pan Head Screw Rubber Grommet 88 Currant Road / Fall River, MA 02720-4781 23 AD-15/AD-25 Cold Rolled Steel (CRS) Door Front Panel Illus. No. Part No. Qty. 1 881268* 1 881287 1 881793* 1 881270* 1 881288 1 881996* 1 2 3 154215 881987 2 1 4 5 6 150300 150309 881152 881208 150445 150443 881151 881209 1 8 1 1 4 4 1 1 7 8 * Description AD-15 Cold Rolled Steel (CRS) Front Panel Assembly (includes illus. nos. 1 through 3) AD-15 Cold Rolled Steel (CRS) Stainless Steel Front Panel Assembly (includes illus. nos. 1 through 3) AD-15 Cold Rolled Steel (CRS) Left Hand Front Panel Assembly (includes illus. nos. 1 through 3) AD-25 Cold Rolled Steel (CRS) Front Panel Assembly (includes illus. nos. 1 through 3) AD-25 Cold Rolled Steel (CRS) Stainless Steel Front Panel Assembly (includes illus. nos. 1 through 3) AD-25 Cold Rolled Steel (CRS) Left Hand Front Panel Assembly (includes illus. nos. 1 through 3) 5/32” x 1/4” Rivet Friction Door Latch Kit (includes illus. nos. 2 and 3) #10-16 x 1/2” Hex Washer TEK Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw Black Top Hinge Block Assembly Stainless Steel Top Hinge Block Assembly 1/4-20 x 7/8” Black Cap Head Setscrew 1/4-20 x 7/8” Stainless Steel Cap Head Setscrew Black Bottom Hinge Block Assembly Stainless Steel Bottom Hinge Assembly Specify color when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 24 AD-15/AD-25 Front Panel Assembly For Models with Plastic Doors Illus. No. Part No. Qty. 1 875300* 1 875301* 1 875311 1 875312 1 2 3 154215 881987 2 1 4 5 6 150300 150309 121405 1 8 1 * Description AD-15 Right Hand Insulated Front Panel Assembly Complete (latch-type) (includes illus. nos. 1 through 3 and 6) AD-25 Right Hand Insulated Front Panel Assembly Complete (latch-type) (includes illus. nos. 1 through 3 and 6) AD-15 Stainless Steel Right Hand Insulated Front Panel Assembly Complete (latch-type) (includes illus. nos. 1 through 3 and 6) AD-25 Stainless Steel Right Hand Insulated Front Panel Assembly Complete (latch-type) (includes illus. nos. 1 through 3 and 6) 5/32” x 1/4” Rivet Friction Door Latch Kit (includes illus. nos. 2 and 3) #10-16 x 1/2” Hex Washer TEK Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw Rubber Grommet Specify color when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 25 AD-15 Basket (Tumbler)/Support Assembly Illus. No. 1* 2 3 4** 5 6 7 8 9 10 11 -- Part No. Qty. 800700 800850 800812 1 1 1 800860 1 150313 301307 301407 150518 100900 153001 800610 152004 153002 153001 116002 401010 24 4 4 1 4 4 1 4 4 4 1 1 Description AD-15 Galvanized Basket (tumbler) ONLY (without felt collar) AD-15 Stainless Steel Basket (tumbler) ONLY (without felt collar) AD-15 Galvanized Basket (tumbler) and Support Assembly (includes illus. nos. 1 through 10) AD-15 Stainless Steel Basket (tumbler) and Support Assembly (includes illus. nos. 1 through 10) #10-16 x 1/2” TORX + BTN, Type 1 AD-15 Galvanized Basket (tumbler) Rib ONLY AD-15 Stainless Steel Basket (tumbler) Rib ONLY 5/16-18 x 3/8” Socket Button Head Screw 5/16-18 x 17-1/2” Tie Rod 5/16” Flat Washer AD-15 Basket (tumbler) Support ONLY 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer Felt Collar ONLY #847 Adhesive for Felt Collar (5.0 oz. tube) * Felt collar is not included and must be ordered separately. ** For models mfd. prior to January 21, 2002 ONLY. Telephone: (508) 678-9000 Fax: (508) 678-9447 26 Illus. No. AD-25 Basket (Tumbler)/Support Assembly Part No. Qty. 800702 800731 817085 1 1 1 800752 1 4** 5 150313 301305 301420 150518 882049 24 4 4 1 4 6 7 8 9 10 11 -- 153004 800611 152005 153005 153004 116002 401010 4 1 4 4 4 1 1 1* 2 3 Description AD-25 Galvanized Basket (tumbler) ONLY (without felt collar) AD-25 Stainless Steel Basket (tumbler) ONLY (without felt collar) AD-25 Galvanized Basket (tumbler) and Support Assembly (includes illus. nos. 1 through 10) AD-25 Stainless Steel Basket (tumbler) and Support Assembly (includes illus. nos. 1 through 10) #10-16 x 1/2” TORX + BTN, Type 1 AD-25 Galvanized Basket (tumbler) Rib ONLY AD-25 Stainless Steel Basket (tumbler) Rib ONLY 5/16-18 x 3/8” Socket Button Head Screw 5/16” to 3/8” Tie Rod Kit (includes illus. nos. 5, 6, and 8 through 10) 5/16” to 3/8” Flat Washer AD-25 Basket (tumbler) Support ONLY 3/8-18 Hex Nut 3/8” Lock Washer 3/8” Flat Washer Felt Collar ONLY #847 Adhesive for Felt Collar (5.0 oz. tube) * Felt collar is not included and must be ordered separately. ** For models mfd. prior to January 21, 2002 ONLY. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Drop Lint Door Assembly Without Trim 27 For AD-15 OPL Models Mfd. as of July 24, 1999 For AD-25 OPL Models Mfd. as of November 11, 1998 Illus. No. Part No. Qty. 1 800150 1 2 160003 160104 160008 160009 150425 1 1 1 1 1 3 4 157000 883143* 1 1 882264* 1 883141 1 883142 1 117604 150419 108120 150418 7 2 1 1 5 6 7 * Description Knob Latch Kit Assembly (includes illus. nos. 1 and 2) Dummy Lock ONLY MK-100 Key ONLY Lock Cam Knob Latch Adjustable Cam ONLY #12-24 x 3/8” Round Head Machine Screw ONLY (screw for knob latch adjustable cam) Drop Lint Door Spring AD-15 Insulated Lint Door Assembly (includes illus. nos. 4 and 5) AD-25 Insulated Lint Door Assembly (includes illus. nos. 4 and 5) AD-15 Stainless Steel Lint Door Assembly (includes illus. nos. 4 and 5) AD-25 Stainless Steel Lint Door Assembly (includes illus. nos. 4 and 5) Neoprene Sponge Tape (sold by the foot) #6 x 1/2” Tamperproof TEK Screw Chain for Drop Lint Door (10-1/2” length) Tamperproof Screw Hand Driver Specify color when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 28 Drop Lint Door Assembly With Trim For ALL Coin Models For AD-15 OPL Models Mfd. prior to July 24, 1999 For AD-25 OPL Models Mfd. prior to November 11, 1998 American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Drop Lint Door Assembly With Trim 29 For ALL Coin Models For AD-15 OPL Models Mfd. prior to July 24, 1999 For AD-25 OPL Models Mfd. prior to November 11, 1998 Illus. No. Part No. Qty. 1 160001 160103 800150 160003 160104 160008 160009 150425 157000 883267* 1 1 1 1 1 1 1 1 1 1 800215* 1 800239 883268* 1 1 800219* 1 800243 150201 117604 117603 1 10 7 3 102307 3 180210 180310 180211 180311 150419 150418 108120 2 2 2 2 2 1 1 2 3 4 5 6 7 8 9 10 * Description Lock Assembly with Key (for coin models Only) Key ONLY Knob Latch Kit Assembly (for non-coin models Only) Dummy Lock ONLY (for non-coin models Only) MK-100 Key ONLY (master key) Lock Cam for Lock and Dummy Lock Knob Latch Adjustable Cam (for non-coin models Only) #12-24 x 3/8” Right Hand Machine Screw (for knob latch adjustable cam) Drop Lint Door Spring AD-15 Drop Lint Door Assembly with Black Trim (includes illus. nos. 4 through 8) AD-15 Drop Lint Door Assembly with Gray Trim (includes illus. nos. 4 through 8) AD-15 Stainless Steel Drop Lint Door Assembly with Gray Trim AD-25 Drop Lint Door Assembly with Black Trim (includes illus. nos. 4 through 8) AD-25 Drop Lint Door Assembly with Gray Trim (includes illus. nos. 4 through 8) AD-25 Stainless Steel Drop Lint Door Assembly with Gray Trim #10-32 x 1/4” Phillips Pan Head Machine Screw Noise Suppressor Tape (sold by the foot) Suppressor Tape/Gasket (sold by the foot) For Models Mfd. as of February 8, 1995 Trim Bumper Gasket (sold by the foot) For Models Mfd. prior to February 8, 1995 AD-15 Gray Trim/Kick Plate (31-1/8” long) AD-15 Black Trim/Kick Plate (31-1/8” long) AD-25 Gray Trim/Kick Plate (34-1/8” long) AD-25 Black Trim/Kick Plate (34-1/8” long) #6 x 1/2” Tamperproof TEK Screw Tamperproof Screw Hand Driver Chain for Drop Lint Door Specify color when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 30 AD-15/AD-25 Lint Trap Assembly Illus. No. Part No. Qty. 1 800425* 1 800426* 800400** 1 1 800403** 154200 150300 304100 800500 150419 108120 150418 1 6 3 1 2 2 1 1 2 3 4 5 6 7 - Description AD-15/AD-25 Choked Lint Trap Assembly Complete (includes illus. nos. 1, 3, 4, and 5) AD-15/AD-25 Choked Lint Trap ONLY AD-15/AD-25 Lint Trap Assembly Complete (includes illus. nos. 1, 3, 4, and 5) AD-15/AD-25 Lint Trap ONLY 5/32” Pop Rivet #10-16 x 1/2” Hex Washer TEK Screw Lint Screen Holder ONLY AD-15/AD-25 Lint Screen ONLY #6 x 1/2” Tamperproof TEK Screw Chain for Drop Lint Door Tamperproof Screw Hand Driver * For gas models ONLY. ** For electric models and steam models ONLY. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 AD-15/AD-25 Basket (Tumbler) Bearing Assembly Illus. No. Part No. Qty. 1 2 3 4 5 6 7 8 153002 880213 153002 152004 150501 153002 153004 801100 3 1 3 3 4 4 4 1 9 10 11 12 13 14 15 16 17 18 801105 150610 152004 150501 880201 153002 152004 101100 154301 100713 100108 1 2 2 3 1 3 3 1 2 1 1 100107 1 Telephone: (508) 678-9000 31 Description 5/16” Lock Washer 1-1/4” Flange Bearing ONLY 5/16” Lock Washer 5/16-18 Hex Nut 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 3/8” Flat Washer 1” Bearing Box Assembly Complete (includes illus. nos. 8 through 14) Bearing Box ONLY 5/16-18 x 1-1/2” Allen Setscrew 5/16-18 Hex Nut 5/16-18 x 3/4” Hex Head Machine Bolt 1” Flange Bearing ONLY 5/16” Lock Washer 5/16-18 Hex Nut 18” Pulley ONLY 5/16-18 x 5/16” Setscrew 1/4” x 1/4” x 7/8” Key 5L-680 V-Belt (basket [tumbler] to idler) For AD-15 5L-670 V-Belt (basket [tumbler] to idler) For AD-25 Fax: (508) 678-9447 32 American Dryer Corporation AD-15/AD-25 Idler Bearing Assembly 88 Currant Road / Fall River, MA 02720-4781 AD-15/AD-25 Idler Bearing Assembly Illus. No. Part No. Qty. 1 100108 1 100107 1 101129 100110 1 1 100103 1 4 5 6 154301 100705 882576 2 1 1 7 8 9 10 11 12 150617 153005 153004 801009 152004 150509 2 2 2 1 1 1 2 3 Telephone: (508) 678-9000 33 Description 5L-680 V-Belt (idler to basket [tumbler]) For AD-15 5L-670 V-Belt (basket [tumbler] to idler) For AD-25 9” x 2-1/2” Compound Pulley 4L-500 V-Belt (idler to motor) For AD-15 For AD-25 60 Hz ONLY 4L-510 V-Belt (idler to motor) For AD-25 50 Hz ONLY 5/16-18 x 1” Allen Setscrew 3/16” x 3/16” x 1-3/8” Key Idler Bearing Assembly Complete (includes illus. nos. 5 through 12) 3/8-16 x 1” Hex Head Machine Bolt 3/8” Lock Washer 3/8” Flat Washer Idler Square Washer 5/16-18 Hex Nut 5/16-18 x 3” Hex Head Machine Bolt Fax: (508) 678-9447 34 AD-15 Motor Mount Assembly Illus. No. Part No. Qty. 1 2 100110 100701 1 1 3 101104 1 101131 1 101132 1 101133 1 150501 153002 153001 181049 4 4 4 1 883572 1 4 5 6 7 American Dryer Corporation Description 4L-500 V-Belt (to idler assembly) 3/16” x 3/16” x 1” Key (for use on 3ø models Only) 1/2” x 2” Motor Pulley (for use on 1ø - 60 Hz motors Only) 1/2” x 2-1/4” Motor Pulley (for use on 1ø - 50 Hz motors Only) 5/8” x 2” Motor Pulley (for use on 3ø - 60 Hz motors Only) 5/8” x 2-1/4” Motor Pulley (for use on 3ø - 50 Hz motors Only) 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 1/2 HP 100-230v 1ø 50/60 Hz Plug-Type Motor (for models mfd. as of February 4, 2002) 1/2 HP 240v 1ø 50 Hz Plug-Type Motor (for models mfd. prior to February 4, 2002) 88 Currant Road / Fall River, MA 02720-4781 AD-15 Motor Mount Assembly (continued) Illus. No. Part No. Qty. 8 122701 122801 137030 152004 153002 153001 117604 154000 800908 803930* 8 1 1 4 4 4 4 4 1 1 880819 1 803801* 1 803800* 1 153050 100604 100702 153050 152006 120200 100007* 2 1 1 2 2 1 1 9 10 11 12 13 14 15 16 17 18 19 20 21 22 * 35 Description Socket Terminal ONLY Pin/Socket Extraction Tool 8-Pin Housing Connector 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer 1/8” x 3/8” Sponge Tape (sold by the foot) 5/16-18 Tinnerman Nut 1/2 HP Motor Mount ONLY (56Z frame) 1/2 HP 115-230v 1ø 60 Hz Motor Mount Assembly Complete with Plug Motor (includes illus. nos. 2 through 7 and 13 through 20) 1/2 HP 240v 1ø 50 Hz Motor Mount Assembly Complete with Plug Motor (includes illus. nos. 2 through 7 and 13 through 20) 1/2 HP 208/230/380/460v 3ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22) 1/2 HP 208/230/380/460v 3ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22) 1/2” S.A.E. Flat Washer 12-1/2” Impellor with 1/2” Bore 1/8” x 1/8” x 1-1/2” Key 1/2” S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut 3/8” 90° Connector 1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor (56Z frame) Specify voltage when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 36 AD-25 Motor Mount Assembly Illus. No. Part No. Qty. 1 2 100110 100103 100701 1 1 1 3 101102 1 101103 1 101104 1 101132 1 150501 153002 153001 181049 4 4 4 1 883573 1 4 5 6 7 American Dryer Corporation Description 4L-500 V-Belt (to idler assembly) 60 Hz 4L-510 V-Belt (to idler assembly) 50 Hz 3/16” x 3/16” x 1” Key (for use on 3ø models Only) 1/2” x 1-3/4” Motor Pulley (for use on 1ø - 60 Hz motors Only) 5/8” x 1-3/4” Motor Pulley (for use on 3ø - 60 Hz motors Only) 1/2” x 2” Motor Pulley (for use on 1ø - 50 Hz motors Only) 5/8” x 2” Motor Pulley (for use on 3ø - 50 Hz motors Only) 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 1/2 HP 100-230v 1ø 50/60 Hz Plug-Type Motor (for ALL 50/60 Hz models mfd. as of February 4, 2002) 1/2 HP 240v 1ø 50 Hz Plug-Type Motor - Includes 2” Motor Pulley (for models mfd. prior to February 4, 2002) 88 Currant Road / Fall River, MA 02720-4781 AD-25 Motor Mount Assembly (continued) Illus. No. Part No. Qty. 8 122701 122801 137030 152004 153002 153001 117604 154000 850017 803935* 8 1 1 4 4 4 4 4 1 1 880820 1 803807* 1 803806* 1 153050 100604 100702 153050 152006 120200 100007* 2 1 1 2 2 1 1 9 10 11 12 13 14 15 16 17 18 19 20 21 22 * 37 Description Socket Terminal ONLY Pin/Socket Extraction Tool 8-Pin Housing Connector 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer 1/8” x 3/8” Sponge Tape (sold by the foot) 5/16-18 Tinnerman Nut 1/2 HP Motor Mount ONLY (56Z frame) 1/2 HP 115-230v 1ø 60 Hz Motor Mount Assembly Complete with Plug Motor (includes illus. nos. 2 through 7 and 13 through 20) 1/2 HP 240v 1ø 50 Hz Motor Mount Assembly Complete with Plug Motor (includes illus. nos. 2 through 7 and 13 through 20) 1/2 HP 208/230/380/460v 3ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22) 1/2 HP 208/230/380/460v 3ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22) 1/2” S.A.E. Flat Washer 12-1/2” Impellor with 1/2” Bore 1/8” x 1/8” x 1-1/2” Key 1/2” S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut 3/8” 90° Connector 1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor (56Z frame) Specify voltage when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 38 American Dryer Corporation Sensor Bracket Assemblies 88 Currant Road / Fall River, MA 02720-4781 Sensor Bracket Assemblies Illus. No. Part No. Qty. 1 880251 1 2 3 4 5 6 7 8 9 10 130103 153010 152000 121028 122701 122605 154007 150005 801425 1 2 2 2 4 1 2 2 1 11 12 13 14 15 16 17 18 19 20 21 22 23 24 305007 122604 122700 150301 150005 130111 130100 130103 130101 153010 152000 840065 121028 122701 122605 840062 1 1 4 2 5 1 1 1 1 5 5 1 4 4 1 1 25 801418 1 305007 122604 122700 122801 150301 1 1 4 1 2 26 27 28 Telephone: (508) 678-9000 39 Description 1/4” Temperature Sensor Probe Assembly (includes illus. nos. 1 and 5 through 8) 225° Large Automatic Reset Thermostat #6 Star Washer #6-32 Hex Nut Insulated Terminal ONLY Socket Terminal ONLY 4-Pin Socket Connector ONLY 1/4” Tinnerman Push On Fastener #6-32 x 1/4” Round Head Machine Screw Microprocessor Sensor Bracket Assembly Complete (includes illus. nos. 1 through 10) Universal Sensor Bracket ONLY 4-Pin Connector ONLY Pin Terminal ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw #6-32 x 1/4” Slotted Round Head Machine Screw 130° Large Thermostat 150° Large Thermostat 225° Large Automatic Reset Thermostat 180° Large Thermostat #6 Star Washer #6-32 Hex Nut Sensor Jumper ONLY Insulated Terminal ONLY Socket Terminal ONLY 4-Pin Socket Connector ONLY Sensor Bracket Harness Assembly (includes illus. nos. 22 through 24) Noncomputer Sensor Bracket Assembly Complete - Includes Thermostats (includes illus. nos. 14 through 25) Universal Sensor Bracket ONLY 4-Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool #8-18 x 7/16” Phillips Pan Head TEK Screw Fax: (508) 678-9447 40 ADG-15 Direct Spark Ignition (DSI) Burner Assembly For Models Mfd. as of May 20, 2000 Illus. No. Part No. Qty. 1 2 3 4 141104 150108 151001 140811 140848 2 2 2 2 2 140809 140848 2 2 141230 150309 318716 1 5 1 5 6 7 American Dryer Corporation Description Small Burner Tube #8-32 x 1/2” Pan Head Machine Screw #8-32 Pal Nut #41 Natural Gas Burner Orifice for Non-Heat Reclaimer Models ONLY #54 Liquid Propane (L.P.) Burner Orifice for Non-Heat Reclaimer Models ONLY #43 Natural Gas Burner Orifice for Heat Reclaimer Models ONLY #54 Liquid Propane (L.P.) Burner Orifice for Heat Reclaimer Models ONLY 1/2” 2-Port Manifold #10-16 x 1/2” Hex Head TEK Crimptite Screw Gas Valve Bracket 88 Currant Road / Fall River, MA 02720-4781 ADG-15 Direct Spark Ignition (DSI) Burner Assembly 41 For Models Mfd. as of May 20, 2000 Illus. No. Part No. Qty. 8 128927 1 9 10 11 12 13 880960 142707 142500 142754 142600 883145 1 1 1 2 1 1 883146 1 883147 883148 1 1 850850 809750 809308 880330 150300 318700 154004 802799 122200 150303 105500 319202 154002 802800 802801 1 1 1 1 6 1 1 1 1 2 1 1 1 1 1 319704 150001 130201 151000 1 2 1 2 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Telephone: (508) 678-9000 Description 1/2” 24 VAC Redundant Gas Valve (natural gas) (refer to DSI L.P. Conversion Kit Listing on page 65) 1/2” 24 VAC Liquid Propane (L.P.) Gas Valve 1/2” x 1-1/2” B.I. Nipple 1/2 x 90° Elbow 1/2” x 8” B.I. Nipple 1/2” Black Union Natural Gas Burner Box Assembly Complete Less Orifice For Non-Heat Reclaimer Models ONLY Liquid Propane (L.P.) Burner Box Assembly Complete Less Orifice For Non-Heat Reclaimer Models ONLY Heat Reclaimer Natural Gas Burner Box Assembly Complete Less Orifice Heat Reclaimer Liquid Propane (L.P.) Burner Box Assembly Complete Less Orifice Non-Heat Reclaimer Burner Box ONLY Heat Reclaimer Burner Box ONLY Ignitor/Flame-Probe Assembly with Leads High Voltage (HV) Wire and Connector Assembly #10-16 x 1/2” Hex Washer TEK Screw Pipe Bracket Twin Speed Nut Sail Switch Box Cover and Bracket ONLY Sail Switch #4 x 3/4” Pan Head Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push On Fastener Sail Switch Box with Cover Sail Switch Assembly Complete (includes illus. nos. 15 and 17 through 23) Hi-Limit Mounting Bracket #6-32 x 1/2” Phillips Round Head Machine Screw 330º Manual Reset Hi-Limit #6-32 Pal Nut Fax: (508) 678-9447 42 ADG-25 Direct Spark Ignition (DSI) Burner Assembly For Models Mfd. as of May 20, 2000 Illus. No. Part No. Qty. 1 2 3 4 141104 150108 151001 140818 140802 2 2 2 2 2 140852 140801 2 2 141230 1 5 American Dryer Corporation Description Small Burner Tube #8-32 x 1/2” Pan Head Machine Screw #8-32 Pal Nut #31 Natural Gas Burner Orifice for Non-Heat Reclaimer Models ONLY #50 Liquid Propane (L.P.) Burner Orifice for Non-Heat Reclaimer Models ONLY #34 Natural Gas Burner Orifice for Heat Reclaimer Models ONLY #51 Liquid Propane (L.P.) Burner Orifice for Heat Reclaimer Models ONLY 1/2” 2-Port Manifold 88 Currant Road / Fall River, MA 02720-4781 ADG-25 Direct Spark Ignition (DSI) Burner Assembly (continued) 43 For Models Mfd. as of May 20, 2000 Illus. No. Part No. Qty. 6 7 8 150309 318716 128927 5 1 1 9 10 11 12 13 880960 142707 142506 142600 142800 883151 1 1 1 1 1 1 883152 1 883153 1 883154 1 850850 809750 809307 880330 150300 318700 154004 802799 802801 122200 150303 105500 319202 154002 319704 150001 130201 151000 150309 318202 1 1 1 1 6 1 1 1 1 1 2 1 1 1 1 2 1 2 2 1 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 Telephone: (508) 678-9000 Description #10-16 x 1/2” Hex Head TEK Crimptite Screw Gas Valve Bracket 1/2” 24 VAC Redundant Gas Valve (natural gas) (refer to DSI L.P. Conversion Kit Listing on page 65) 1/2” 24 VAC Liquid Propane (L.P.) Gas Valve 1/2” x 1-1/2” B.I. Nipple 1/2” x 1/2” Street Elbow 1/2” Black Union 1/2” x 18” Pipe Natural Gas Burner Assembly Complete Less Orifice for Non-Heat Reclaimer Models ONLY Liquid Propane (L.P.) Burner Assembly Complete Less Orifice for Non-Heat Reclaimer Models ONLY Natural Gas Burner Assembly Complete Less Orifice for Heat Reclaimer Models ONLY Liquid Propane (L.P.) Burner Assembly Complete Less Orifice for Heat Reclaimer Models ONLY Non-Heat Reclaimer Burner Box ONLY Heat Reclaimer Burner Box ONLY Ignitor/Flame-Probe Assembly High Voltage (HV) Wire and Connector Assembly #10-16 x 1/2” Hex Washer TEK Screw Pipe Bracket Twin Speed Nut Sail Switch Box Cover and Bracket ONLY Sail Switch Assembly Complete Sail Switch #4 x 3/4” Pan Head Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push On Fastener Hi-Limit Mounting Bracket #6-32 x 1/2” Phillips Round Head Machine Screw 330º Manual Reset Hi-Limit #6-32 Pal Nut #10-16 x 1/2” Hex Head TEK Crimptite Screw (for 50 Hz models Only) Rear Burner Air Deflector (for 50 Hz models Only) Fax: (508) 678-9447 44 ADG-15/ADG-25 Direct Spark Ignition (DSI) Burner Assembly For Models Mfd. prior to May 20, 2000 American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 ADG-15/ADG-25 Direct Spark Ignition (DSI) Burner Assembly 45 For Models Mfd. prior to May 20, 2000 Illus. No. Part No. Qty. 1 2 3 4 318030 150300 150309 880134 1 2 2 1 5 6 7 8 9 10 880330 150103 153000 151001 141104 -------- 1 2 2 2 2 2 11 12 13 14 141230 318700 150300 128927 880960 --------* --------* 881367 1 1 2 1 1 18 19 20 21 142800 150309 318700 850850 850861 -------- 1 4 2 1 1 1 22 23 -- 882627 150299 -------- 1 4 1 15 16 17 * 1 1 Description Direct Spark Ignition (DSI) Burner Shield #10-16 x 1/2” Hex Washer TEK Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw Ignitor/Flame-Probe Kit Assembly (includes illus. nos. 4 and 5) High Voltage (HV) Wire Connector Assembly #8-32 x 1/2” Pan Head Machine Screw #8 Steel Burr #8-32 Pal Nut Small Tube Burner ONLY Burner Orifice (refer to DSI Burner Orifice Listing on page 65) 1/2” Direct Spark Ignition (DSI) Manifold (2-port) Pipe Bracket (bent) #10-16 x 1/2” Hex Washer TEK Screw 1/2” 24 VAC Redundant Gas Valve (natural gas) 1/2” 24 VAC Liquid Propane (L.P.) Gas Valve Tail Piece Collar ONLY 1/2” Union Tail Piece ONLY Union Shut Off Body Complete with Tail Piece and Collar (includes illus. nos. 15 through 17) 1/2” x 18” Pipe #10-16 x 1/2” Hex Head TEK Crimptite Screw Pipe Bracket (bent) Non-Heat Reclaimer Burner Box ONLY Heat Reclaimer Burner Box ONLY Burner Assembly Complete Less Orifices (refer to DSI Burner Assembly Listing on page 65) ADC Direct Spark Ignition (DSI) Module ONLY #10 x 1” Hex Washer TEK Screw Conversion Kit (refer to DSI L.P. Conversion Kit Listing on page 65) Not available individually...must be purchased as an assembly. Telephone: (508) 678-9000 Fax: (508) 678-9447 46 ADE-15/ADE-25 Electric Oven Assembly ELECTRIC OVEN (REAR VIEW) American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 47 ADE-15/ADE-25 Electric Oven Assembly Illus. No. Part No. Qty. 1 803003* --------* --------* 150300 802800 802801 1 1 2 1 1 154004 150309 802799 122200 150303 105500 319202 154002 150300 803100 320611 150207 130400 150300 154001 121010 152014 --------* --------* 120081 120080 152008 121011* --------* 153009 321300 150402 1 2 1 1 2 1 1 1 2 1 1 2 1 2 2 1 3 1 1 1 2 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 * Description Small Electric Oven Box ONLY Electric Oven Assembly Complete Electric Element #10-16 x 1/2” Hex Washer TEK Screw Sail Switch Box with Bracket and Cover ONLY Sail Switch Box Assembly Complete (includes illus. nos. 4 through 12) Twin Speed Nut #10-16 x 1/2” Hex Head TEK Crimptite Screw Sail Switch Box Cover ONLY Sail Switch ONLY #4 x 3/4” Pan Head “A” Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push On Fastener #10-16 x 1/2” Hex Washer TEK Screw Electric Oven Front Cover ONLY Large Relay Box Cover ONLY #10-24 x 1/2” Phillips Round Head Machine Screw 290º Hi-Limit #10-16 x 1/2” Hex Washer TEK Screw #10-24 Speed Nut L-70 Ground Lug 1/4-20 Free Spin Wash Nut Oven Relay Oven Relay Replacement Coil Internal Ceramic Insulator (2 per element) External Ceramic Insulator (2 per element) #10-32 Hex Nut (4 per element) Bus Bar Terminal Lug #10 Star Washer (2 per element) Small Electric Oven Right Side Cover ONLY #10-24 x 5/8” Slotted Truss Head Machine Screw Refer to ADE-15/ADE-25 Electric Oven Component Application Charts on page 64. Telephone: (508) 678-9000 Fax: (508) 678-9447 48 ADG-15/ADG-25 DSI Johnson Control Module Assembly For Models Mfd. as of May 20, 2000 Illus. No. Part No. Qty. 1 2 3 4 152013 801048 150301 801711 2 1 2 1 American Dryer Corporation Description #6-32 Hex Nut ADC Direct Spark Ignition (DSI) Johnson Control Module #8-18 x 7/16” Phillips Round Head TEK Screw Direct Spark Ignition (DSI) Module Mounting Plate 88 Currant Road / Fall River, MA 02720-4781 ADG-15/ADG-25 Sail Switch/Hi-Limit Assemblies Illus. No. Part No. Qty. 1 2 3 4 5 6 7 8 9 154004 150309 802799 150303 122200 105500 319202 154002 802800 802801 1 2 1 2 1 1 1 1 1 1 10 11 12 13 14 15 142800 150309 319704 151000 151001 130201 1 2 1 2 2 1 Telephone: (508) 678-9000 49 Description Twin Speed Nut #10-16 x 1/2” Hex Head TEK Crimptite Screw Sail Switch Box Cover and Bracket ONLY #4 x 3/4” Pan Head “A” Machine Screw Sail Switch ONLY Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push On Fastener Sail Switch Box with Cover and Bracket ONLY Sail Switch Assembly Complete (includes illus. nos. 1 through 8) 1/2” x 18” Pipe #10-16 x 1/2” Hex Head TEK Crimptite Screw Hi-Limit Mounting Bracket ONLY #6-32 Pal Nut #6-32 x 1/2” Round Head Machine Screw 330º Hi-Limit ONLY Manual Reset Fax: (508) 678-9447 50 Single-Phase (1ø) Motor, Electric Relay Panel Assembly Illus. No. Part No. Qty. 1 2 3 132475 150299 824828 1 2 1 - 322809 150301 1 4 American Dryer Corporation Description 2-Pole Contactor - 24 VAC #10 x 1” Hex Washer TEK Screw RC Network with Connectors (for microprocessor models Only) Back Electrical Box Cover...Not Illustrated #8-18 x 7/16” Phillips Round Head TEK Screw...Not Illustrated 88 Currant Road / Fall River, MA 02720-4781 51 3-Phase (3ø) Motor, Electric Relay Panel Assembly Illus. No. Part No. Qty. 1 2 3 322812 132447 137015 1 1 1 4 5 6 7 8 9 10 11 12 150103 151001 153002 152004 120701 150008 151000 121300 --------- 2 2 1 1 1 2 2 3 1 13 --- 150300 322809 150301 2 1 4 Telephone: (508) 678-9000 Description Back Electrical Box Component Mounting Plate Impellor Contactor (208/230/240v, 50/60 Hz) 24 VAC RC Filter (for microprocessor models Only) #8-32 x 3/4” Phillips Round Head Machine Screw #8-32 Pal Nut 5/16” Lock Washer 5/16-18 Hex Nut 4-Position Terminal Block #6-32 x 1-1/4” Slotted Round Head Machine Screw #6-32 Pal Nut Open/Closed Bushing Step Down Transformer (refer to AD-15/AD-25 Transformer Usage Listing for Gas/Steam Dryers on page 62) (refer to ADE-15/ADE-25 Transformer Usage Listing for Electric Dryers on page 63) #10-16 x 1/2” Hex Washer TEK Screw Back Electrical Box Cover...Not Illustrated #8-18 x 7/16” Phillips Round Head TEK Screw...Not Illustrated Fax: (508) 678-9447 52 Slide Meter Control Box Assembly For Models Mfd. as of January 13, 1995 Illus. No. Part No. Qty. 1 2 3 4 132475 150299 150300 -------- 1 2 2 - 5 6 7 8 9 10 11 12 13 --- 136057 150301 136008 150002 120715 151000 153002 152004 305520 322809 150301 * * * 2 1 2 1 1 1 1 4 * Description 2-Pole Contactor - 24 VAC #10 x 1” Hex Washer TEK Screw #10-16 x 1/2” Hex Head Washer TEK Screw 24 VAC Transformer (refer to AD-15/AD-25 Transformer Usage Listing for Gas/Steam Dryers on page 62) (refer to ADE-15/ADE-25 Transformer Usage Listing for Electric Dryers on page 63) 1/2-Amp (Slo-Blo) Fuse ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw Fuse Block/Strip ONLY #6-32 x 1” Round Head Machine Screw 30-Position Terminal Block ONLY #6-32 Pal Nut 5/16-18 Lock Washer 5/16-18 Hex Nut Rear Contactor Plate ONLY Back Electrical Box Cover...Not Illustrated #8-18 x 7/16” Phillips Pan Head TEK Screw...Not Illustrated As required. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 53 Slide Meter Control Box Assembly For Models Mfd. prior to January 13, 1995 Illus. No. Part No. Qty. 1 2 3 4 132475 150299 150300 -------- 1 2 2 1 5 6 7 8 9 10 --- 136057 150301 136008 150002 120715 151000 322809 150301 * * * 2 1 2 1 4 * Description 2-Pole Contactor - 24 VAC #10 x 1” Hex Washer TEK Screw #10-16 x 1/2” Hex Washer TEK Screw 24 VAC Transformer ONLY (refer to AD-15/AD-25 Transformer Usage Listing for Gas/Steam Dryers on page 62) (refer to ADE-15/ADE-25 Transformer Usage Listing for Electric Dryers on page 63) 1/2-Amp (Slo-Blo) Fuse ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw Fuse Block/Strip ONLY #6-32 x 1” Round Head Machine Screw 30-Position Terminal Block ONLY #6-32 Pal Nut Back Electrical Box Cover...Not Illustrated #8-18 x 7/16” Phillips Pan Head TEK Screw...Not Illustrated As required. Telephone: (508) 678-9000 Fax: (508) 678-9447 54 ADS-15/ADS-25 Steam Coil/Air-Operated Steam Damper Assembly American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 ADS-15/ADS-25 Steam Coil/Air-Operated Steam Damper Assembly Illus. No. Part No. Qty. 1 2 3 4 5 6 7 165013 153002 152004 152002 153007 820321 880834 1 6 6 4 4 2 1 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 153007 152002 115995 102350 151006 152051 100495 323365 152002 153007 100472 143110 100472 100496 143238 100498 150002 153010 152000 330987 152002 153007 100520 4 4 48 1 1 1 1 2 2 2 1 1 1 1 1 1 2 2 2 1 2 2 1 Telephone: (508) 678-9000 55 Description Steam Coil Assembly 5/16” Lock Washer 5/16-18 Hex Nut 1/4-20 Hex Nut 1/4” Lock Washer Steam Damper Hinge Assembly Steam Damper Assembly (includes illus. nos. 7, 10, and 11) 1/4” Lock Washer 1/4-20 Hex Nut Steam Damper Gasket (sold by the inch) Steam Damper Foam (68-1/2” length) 5/16-24 Stainless Steel Acorn Nut 5/16-24 Right Hand Jam Nut 11/16” Diameter x 3” Stroke Piston Left and Right Piston Support 1/4-20 Hex Nut 1/4” Lock Washer 1/4” Poly x 1/8” M.P.T. Connector 1/4” Poly-Flo Tubing 1/4” Poly x 1/8” M.P.T. Connector 1/8” Needle Valve 1/8” Brass Close Nipple 3-Way Micro Valve - 24 VAC #6-32 x 1” Machine Bolt #6 Star Washer #6-32 Hex Nut Micro Valve Support 1/4-20 Hex Nut 1/4” Lock Washer 1/8” N.P.T. Silencer (muffler) #N-25 Fax: (508) 678-9447 56 ADS-15/ADS-25 Steam Coil/Mechanical Steam Damper Assembly American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 ADS-15/ADS-25 Steam Coil/Mechanical Steam Damper Assembly Illus. No. Part No. Qty. 1 2 3 4 5 6 7 165013 153002 152004 152002 153007 820321 880835 1 6 6 4 4 2 1 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 115995 102350 309300 154300 153022 104052 150110 153012 312315 153022 154300 850268 150110 153012 312315 104054 100511 122120 150026 122120 150026 153012 150102 --------* 48 1 1 1 1 1 2 2 1 1 1 1 2 2 1 1 1 1 2 1 2 2 2 1 * 57 Description Steam Coil Assembly ONLY 5/16” Lock Washer 5/16-18 Hex Nut 1/4-20 Hex Nut 1/4” Lock Washer Steam Damper Hinge Assembly Steam Damper Assembly (includes illus. nos. 7, 10, and 11) Steam Damper Gasket (sold by the inch) 68-1/2” Long Steam Damper Foam Rod Bracket 1/2” x 3/32” Cotter Pin #10 Steel Burr Mechanical Steam Damper Actuator Rod #8-32 x 1/4” Phillips Head Machine Screw #8 Star Washer Mechanical Steam Damper Motor Mount #10 Steel Burr 1/2” x 3/32” Cotter Pin Mechanical Steam Damper Arm #8-32 x 1/4” Phillips Head Machine Screw #8 Star Washer Mechanical Steam Damper Motor Mount Mechanical Steam Damper Motor Mechanical Steam Damper Switch Plate Mechanical Steam Damper Switch #4-40 x 5/8” Phillips Pan Head Machine Screw Mechanical Steam Damper Switch #4-40 x 5/8” Phillips Pan Head Machine Screw #8 Star Washer #8-32 x 3/8” Pan Head Machine Screw Mechanical Steam Damper Motor Cam The mechanical steam damper motor cam is part of the mechanical steam damper motor. Telephone: (508) 678-9000 Fax: (508) 678-9447 58 Illus. No. 1 2 3* 4 5 6** 7 8 9 AD-15/AD-25 Outer Top/Back Guard Assembly Part No. Qty. 322809 150301 330076 330075 150301 150301 312532 312531 330086 314512 150301 103500 1 4 1 1 7 10 1 1 1 1 13 4 Description Back Electrical Box Cover #8-18 x 7/16” Phillips Pan Head TEK Screw AD-15 Top Back Guard AD-25 Top Back Guard #8-18 x 7/16” Phillips Pan Head TEK Screw #8-18 x 7/16” Phillips Pan Head TEK Screw AD-15 Outer Top AD-25 Outer Top AD-15 “Plain” Bottom Back Guard AD-25 “Plain” Bottom Back Guard #8-18 x 7/16” Phillips Pan Head TEK Screw Leveling Leg * There is no top back guard on gas heat reclaimer models and steam models. ** There is no outer top on gas heat reclaimer models and steam models. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 ADG-15/ADG-25 Heat Reclaimer Assembly Illus. No. 1* 2 3 -* Part No. Qty. 143513 143501 880502 143514 143509 117505 1 1 1 1 1 2 59 Description ADG-15DH 6” x 6” x 5” Tee ADG-25DH 8” x 6” x 6” Tee 6” Replacement Damper Assembly ADG-15DH 5” Flexible Duct ADG-25DH 6” Flexible Duct Aluminum Duct Tape (sold by the foot) Damper assembly must be purchased separately. Telephone: (508) 678-9000 Fax: (508) 678-9447 60 Microprocessor Coin Acceptors Listing NOTE: Coin acceptors listed include optical switch. Replacement optic switch for Hanke acceptors is ADC Part No. 881143. Replacement optic switch for Greenwald acceptors is ADC Part No. 137056. Single Coin* ADC Part No. Nation 882689 United States 125100 U.S. and Canada 881768 881604 125103 125121 125133 Australia Japan ----Hong Kong Description 25¢ Hanke Optic Coin Acceptor (includes optic switch P/N 881143) (for models mfd. as of June 15, 2000) 25¢ Greenwald Optic Coin Acceptor (for models mfd. prior to June 15, 2000) $1 Hanke Australian Optic Coin Acceptor 100 Yen Hanke Optic Coin Acceptor 0.882 Token Greenwald Optic Coin Acceptor 0.800 Token Greenwald Optic Coin Acceptor $1 Greenwald Hong Kong Optic Coin Acceptor Dual Coin* 881842 881542 * Canada United Kingdom 25¢/$1 Hanke Dual Optic Coin Acceptor 1£/20 Pence Hanke Dual Optic Coin Acceptor Consult factory for coin acceptors not listed. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Coin Meter Replacement Parts Illus. No. Part No. Qty. 1 125541 125540 125500 125501 125502 125503 125504 125506 125507 125508 125510 125515 125516 1 1 1 1 1 1 1 1 1 1 1 1 2 2 3 4 Telephone: (508) 678-9000 61 Description 1/60 RPM 24 VAC/60 Hz Meter Motor 1/30 RPM 24 VAC/50 Hz Meter Motor 2-Point Cam 3-Point Cam 4-Point Cam 5-Point Cam 6-Point Cam 8-Point Cam 9-Point Cam 10-Point Cam 12-Point Cam Meter Switch “B” with Arm Meter Switch “A” or “C” Fax: (508) 678-9447 62 AD-15/AD-25 Transformer Usage Listing for Gas/Steam Dryers AD-15 AND AD-25 HEAT VOLTAGE GAS STEAM WIRE STEP DOWN CONTROL SERVICE TRANSFORMER PART. NO. VOLTAGE PART NO. 208-240 3 or 4 --------- 141403 380 3 or 4 132059 141403 416 3 or 4 132062 141403 460/480 3 or 4 132053 141403 575 3 132050 141403 American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 ADE-15/ADE-25 Transformer Usage Listing for Electric Dryers 63 ADE-15 KW VOLTAGE PHASE WIRE STEP DOWN CONTROL VOLTAGE TRANSFORMER PART NO. TRANSFORMER PART NO. 15 208 3ø 3 or 4 ------ 141403 18 460/480 3ø 3 132053 141403 12 208 3ø 3 ------ 141403 18 208 3ø 3 ------ 132070 12 240 3ø 3 ------ 141403 18 240 3ø 3 ------ 141403 12 380 3ø 4 ------ 132082 15 380 3ø 4 ------ 132082 11 400 3ø 4 ------ 132082 15 400 3ø 4 ------ 132082 18 416 3ø 4 ------ 132082 15 208 1ø 2 ------ 132063 18 208 1ø 2 ------ 132063 12 240 1ø 2 ------ 132070 ADE-25 KW VOLTAGE STEP DOWN CONTROL VOLTAGE PHASE WIRE TRANSFORMER PART NO. TRANSFORMER PART NO. (for 3 wire, 380-480 VAC systems) 25 380 3ø 3 or 4 132059 132082 24 208 3ø 3 or 4 ------ 132063 24 230 3ø 3 ------ 132063 24 416 3ø 3 or 4 132062 132082 24 460/480 3ø 3 or 4 132053 141403 20 208 1ø 2 ------ 132063 20 230 1ø 2 ------ 132072 20 380 3ø 3 or 4 132059 132082 Telephone: (508) 678-9000 Fax: (508) 678-9447 64 ADE-15/ADE-25 Electric Oven Component Application Charts ADE-15 KW VOLTAGE PHASE WIRE ELEMENT OVEN ASSY* OVEN WIRE TERMINAL LUG QTY KW PART NO. QTY SIZE PART NO. QTY PART NO. BUS BAR OVEN RELAY P/N: 121011 CAT. NO. PART NO. 18 460/480 3ø 3 or 4 883597 6 3 120007 1 #8 882559 1 121010 2 DPA33 131352 18 416 3ø 3 or 4 826389 6 3 120007 1 #8 882558 1 121010 1 DPA33 131352 131357 18 240 3ø 3 883542 6 3 120007 1 #8 882558 1 121010 2 DPA43 18 208 3ø 3 or 4 824914 6 3 120006 1 #6 882556 1 121010 2 DPA53 131359 18 208 1ø 2 883546 6 3 120006 1 #2 883384 1 121010 2 DPA93 131358 15 380 3ø 3 or 4 826389 6 3 120007 1 #8 882558 1 121010 1 DPA33 131352 15 208 1ø 2 883547 5 3 120006 1 #4 883385 1 121010 1 DPA73 131376 12 240 3ø 3 883543 3 4 120009 1 #8 883558 1 121010 2 DPA33 131352 12 240 1ø 2 883545 4 3 120007 1 #6 883548 1 121010 1 DPA53 131359 12 208 3ø 3 or 4 883544 3 4 120008 1 #8 882558 1 121010 1 DPA33 131352 11 400 3ø 4 826401 6 2 120004 1 #8 882558 1 121010 1 DPA33 131352 ADE-25 KW VOLTAGE PHASE WIRE ELEMENT OVEN ASSY* OVEN WIRE TERMINAL LUG QTY KW PART NO. QTY SIZE PART NO. QTY PART NO. * BUS BAR OVEN RELAY P/N: 121011 CAT. NO. PART NO. 24 460/480 3ø 3 or 4 824951 6 4 120009 1 #8 882559 1 121010 2 DPA33 131352 24 416 3ø 3 or 4 826394 6 4 120009 1 #8 882558 1 121010 1 DPA33 131352 24 240 3ø 3 883557 6 4 120009 1 #6 882556 1 121010 1 DPA63 131369 24 208 3ø 3 or 4 824915 6 4 120008 1 #4 882553 1 121010 1 DPA73 131376 20 380 3ø 3 or 4 826394 6 4 120009 1 #8 882558 1 121010 2 DPA33 131352 20 240 1ø 2 883559 5 4 120009 1 #4 883385 1 121010 2 DPA93 131358 20 208 1ø 2 883561 5 4 120008 1 #2 883384 1 121010 2 DPA93 131358 18 460/480 3ø 3 or 4 883560 6 3 120007 1 #8 882559 1 121010 2 DPA33 131352 18 416 3ø 3 or 4 826389 6 3 120007 1 #8 882558 1 121010 1 DPA33 131352 18 240 3ø 3 883562 6 3 120007 1 #8 882558 1 121010 2 DPA43 131357 18 240 1ø 2 883558 6 3 120007 1 #4 883385 1 121010 2 DPA73 131376 18 208 3ø 3 or 4 824914 6 3 120006 1 #6 882556 1 121010 2 DPA53 131359 18 208 1ø 2 883563 6 3 120006 1 #2 883384 1 121010 2 DPA93 131358 15 380 3ø 3 or 4 826389 6 3 120007 1 #8 882558 6 121010 2 DPA33 131352 When ordering oven assembly complete, specify 3 or 4 wire when applicable as well as if dryer has microprocessor controls or non-microprocessor controls. N/A = Not available. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 65 AD-15/AD-25 DSI Burner Assembly Specifications DSI BURNER ORIFICE LISTING* MODEL NO. HEAT QTY. RECLAIMER ADG-15D ADG-15DH ADG-25D ADG-25DH No Yes No Yes 2 2 2 2 NATURAL GAS D.M.S. PART NO. #42 #43 #32 #34 140810 140809 140851 140852 L.P. GAS D.M.S. PART NO. #54 #54 #50 #51 140848 140848 140802 140801 * Consult factory for elevations over 2,000 feet. DSI BURNER ASSEMBLY LISTING MODEL NO. ADG-15D ADG-15DH ADG-25D ADG-25DH NOTES: 1. 2. BTU/HR HEAT NATURAL GAS L.P. GAS RATING RECLAIMER PART NUMBER PART NO. 50,000 47,000 78,000 70,000 No Yes No Yes 809640 809642 809640 809638 809641 809643 809641 809639 Burner assemblies DO NOT include burner orifices. They must be ordered separately. When ordering burner assemblies, specify model number and if computer or noncomputer controls. DSI L.P. CONVERSION KIT LISTING* MODEL NO. KIT PART NO. ADG-15D/DH ADG-25D/DH 874051 874052 * Consult factory for elevations over 2,000 feet. Telephone: (508) 678-9000 Fax: (508) 678-9447 66 Additional Parts Available Part No. Description 112280 112533 112534 114001 114006 114533 120100 120200 120300 120400 120500 120600 120707 120708 120800 120902 120903 121499 121500 121503 122804 404500 404502 404507 404515 404516 410001 “Lint Screen” Label “Phase 5 Coin Program Location Summary” Label “Phase 5 OPL Program Location Summary” Label “Caution-Exhausted/Lint Screen” Label “Warning-Fire Hazards” Label “120V Electric Service” Label 3/8” Straight (BX) Connector 3/8” x 90° (BX) Connector 3/8” x 45° (BX) Connector 3/8” Red Jacket (BX) Insulator 3/8” Jiffy Clip (BX retainer clip) 3/8” Flexible Steel Electrical Conduit Terminal Strip (2-position) Terminal Strip (3-position) 1/4” In-Line Connector #74B Wire Nut Crimp-On Wire Nut 5-1/2” Harness Tie 8” Harness Tie Harness Tie Mounting Clip Manometer (hydro gauge) for Measuring Gas Pressure Almond Brush-In-Cap Bottle Touch-Up Paint White Brush-In-Cap Bottle Touch-Up Paint Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint Coral Blue Brush-In-Cap Bottle Touch-Up Paint Ivory Brush-In-Cap Bottle Touch-Up Paint 1/2” Allen Wrench American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 ADC 450107 1 - 02/23/93-100 4 - 01/05/94-100 7 * 05/16/96-100 10 * 03/01/02-25 2 * 04/20/93-100 5 * 04/10/95-100 8 * 06/17/97-100 11 * 12/18/02-20 3 * 07/19/93-100 6 * 02/08/96-100 9 * 08/03/00-25