Transcript
CA-1610-3FLQ – Male Plug CA-1510-3FLQ – Female Jack CA-1615-06LQ – Test Light CA-151T-02SLQ – Jack to Terminal Block CA-161T-02SLQ – Plug to Terminal Block CA-1610-3FLQ (3' wire leads) Features: Simplifies installation of any CCTV, Access control, or security application. Eases troubleshooting, check at a glance if there is power. Check for low voltage AC/DC before connecting your device: Correct DC Polarity - Blue Incorrect DC Polarity - Red AC Voltage - Purple CA-1510-3FLQ (3' wire leads) Safety: Illumination glows from all directions to indicate voltage. Saves Money and Time: Test power before connecting equipment. 5 ~ 30 VAC/VDC range. LED shines brighter as voltage increases. Applications: Portable and versatile test light. Permanent power indicator. Check for voltage and polarity of CCTV and access control installations. Check power supply voltage. Check polarity of UTP wires with power. No Power Correct DC Polarity Incorrect DC Polarity CA-1615-06LQ AC Voltage (LED shines brighter as voltage increases.) U.S.A. and international Patents pending. The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints. ® 16842 Millikan Avenue, Irvine, CA 92606 1.949.261.2999 (CA & Int’l) 1.800.662.0800 Fax: 1.949.261.7326 Email: [email protected] Website: www.seco-larm.com IllluminatedPowerConnectors.cdr