Transcript
19714 iPad Air stand holder Product variant 19714-300-55 - black 3/8" Data Bearing plate 249 x 178.7 mm Material plastic Max. load capacity 0.75 kg Special features to be screwed on to 3/8" threaded bolts; iPad Air is easily clipped into the holder; lightning connector and headphone jack are accessible; freely rotates 90°; suitable for iPad Air Suitable for 3/8" thread Swivel 90 º Type black 3/8" Weight 0.38 kg A clever way to show off your iPad Air. The mount is guaranteed to hold the iPad Air effectively and safely. For use on stage, in the rehearsal room or at home - the 3/8" internal thread means the holder can be attached to any microphone stand easily and quickly. The iPad Air is clipped in and out of the holder effortlessly. An easy-to-use wing nut adjusts the tilt so the user can easily find a position to suit them. The iPad Air switches rapidly between the vertical and horizontal format without slipping.
