Transcript
ENC-SW-8x5 DATA SHEET POE Switch Outdoor Enclosure Features For TP-SW series of POE switches Feedthru’s for up to 12 CAT5/6/Power cables Weatherproof / UV Resistant Mounts to wall or pole Description The ENC-SW-8x5 outdoor weatherproof POE switch enclosure is designed especially for the Tycon TP-SW series of POE switches. It accommodates the 5 port or 8 port switches. They provide an inexpensive and convenient way to locate the POE switch on a tower or antenna mast close to the equipment that uses it. There are 6 cable feedthrus which can accommodate up to 12 CAT5 or CAT6 or power cables. The enclosure is made from UV and impact resistant plastic for long life and worry free operation. The enclosure can be pole or wall mounted. Specifications ENC-SW-8x5 Weatherproof Rating Nema 4X, IP65 Temperature Rating -50 to +85°C (-58 to +185°F) Humidity (RH) 0% - 100% Inside Dimensions (LxWxH) Outside Dimensions (LxWxH) 222 x 133 x 45mm (8.75 x 5.25 x 1.75”) 292 x 178 x 64mm (11.5 x 7 x 2.5”) Weight Notes: 567g (1.25 lb) All shipments F.O.B. Bluffdale, UT 84065 ENC-SW-8x5 carries a 2 year warranty Ordering: ENC-SW-8x5 Outdoor weatherproof POE Switch enclosure For further information contact: Tyconpower.com ENC-SW-8x5 Spec Rev 1 3-May-12 Specifications Subject to Change Without Notice 693 Draper Heights Way Ste 102 Draper, UT 84020 PH: 801-432-0003 FAX: 801-618-4220
