Transcript
BACKPLANE TLB-2131SAS In this case you can trust! Product Form Factor Interface (HDD/SSD) Accessories 2x 5,25" for 3x 3,5“ HDDs/SSDs SATA I, SATA II, SATA III, SAS TLB-2131SAS – Plug and Play at its best. No disturbing trays are needed in this backplane. The three 3.5" hard drives are installed directly in the aluminum box and are protected by a high quality lock to prevent unauthorized access. Supports hard disks with a capacity of up to 3TB, SATA I/II/III as well as SAS I/II drives are obviously compatible. Technical Data Interface (HDD/SSD): Dimension (DxWxH): Weight: Form Factor: Cooling: Power Connector: Data Interface (ext.): Supported Raid-Level: Special Features: Scope of delivery: Warranty: SATA I, SATA II, SATA III, SAS 195mm x 146mm x 86mm 0,84 kg 2x 5,25" bays for 3x SATA/SAS HDDs/SDDs (3,5“) 70mm fan 2x SATA 3x SATA 0, 1, and 5 (no Raid controller is included) Fan Failure detection LED Reset switch for buzzer alarm Overheating LED Up to 6Gbps data transfer rate (SATA III / SAS) SATA /SAS Backplane, 4x SATA cable (60cm), set of screws, User manual (engl.) 24 Month features Professional Data Backup Hot Swap Plug & Play compatible Lock mechanism with key Space saving The listed specifications may be altered at any point in time without any pre-notice. Chieftec® is a registered trade mark. All other brands and/or logos are property of the respective owners. Arena Electronic GmbH Halskestraße 22 -26 DE-40880 Ratingen www.chieftec.eu Tel. +49 2102 56 0 77 - 0 Fax. +49 2102 56 0 77 – 99 Email: [email protected]
