Transcript
~~ ~~ ; é _— | | — . SVSA. | Intelligent Innovation GTX TITAN Backplate Installation Remove all 10 screws indicated below. Remember to keep all accessories in case your card needs to be returned to EVGA. 1". e... wie [HTH СН Эш м я Ро РТУ СО AOL TN С Remove the protective cover from the backplate. Place on back of card and align the screw holes. Use the 10 provided screws (not the ones you removed) to install the backplate to the PCB. The screws circled in orange must be installed first and must use spring scres. Once the backplate is firmly attached to the card you are now ready to install your GTX TITAN graphics card. gw ge Wa PEC Ian 18 — Aa O e ois Tow | с ес еее ее еб e (с еее ее